ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA 59 General partner Elektrobau Mulfingen GmbH Headquarters Mulfingen County court Stuttgart HRB 59 Nominal data Type Motor ME68-CF Phase ~ ~ ~ Nominal voltage VAC Frequency Hz 5 6 6 Type of data definition ml ml ml Valid for approval / standard CE CE UL Speed (rpm) min - Power input W 6 66 Current draw A.55.7.7 Motor capacitor µf Capacitor voltage VDB Capacitor standard S (CE) S (CE) S (CE) Max. back pressure Pa Min. ambient temperature C -5-5 -5 Max. ambient temperature C 6 5 5 Starting current A.8.8.8 ml = Max. load me = Max. efficiency fa = Running at free air cs = Customer specs cu = Customer unit Subject to alterations Item no. 8-5-998 ENG Revision 8898 Release 6-8-5 Page / 5
Technical features Mass Size Surface of rotor Material of blades Housing material Number of blades 7 Direction of air flow Direction of rotation Type of protection Insulation class Humidity (F)/environmental protection class (H) Max. permissible ambient motor temp. (transp./ storage) Min. permissible ambient motor temp. (transp./storage) Mounting position Condensate discharge holes Operation mode Motor bearing Touch current acc. IEC 699 (measuring network Fig., TN system) Electrical leads Motor protection Cable exit Protection class Motor capacitor according to EN 65- in safety protection class Product conforming to standard.7 kg 5 mm Coated in black PP plastic Die-cast aluminium "V" Counter-clockwise, seen on rotor IP ; Depending on installation and position "F" H - dry environment + 8 C - C Any None S Ball bearing <.75 ma Via terminal strips, integrated capacitor connected via terminal strips Thermal overload protector (TOP) wired internally Variable I (if protective earth is connected by customer) S EN 65-; CE Approval CSA C. No.77; EAC; CCC; UL Item no. 8-5-998 ENG Revision 8898 Release 6-8-5 Page / 5
Product drawing Direction of air flow "V" For self-tapping M5 screws For self-tapping M6 screws Connection screen PE green/yellow N black L blue Item no. 8-5-998 ENG Revision 8898 Release 6-8-5 Page / 5
Charts: Air flow 5 Hz pfs [Pa] 5 95 9 85 8 75 7 65 6 55 5 5 5 5 5 5 pfs @ rho=, kg/m³ qv [CFM] 6 6 8 qv [m³/h] 8,5,5,8,6,,,,8,6,,,,8,6,,,,8,6,,,,8,6,, 6 8 pfs [InHO] Measurement: LU-66- Air performance measured as per ISO 58 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 7 / LpA measured with m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. Measured values U V f Hz 5 5 5 5 n min - 55 8 P e W 9 I A..7.5.55 LpA in 6 6 6 6 LwA in 7 69 68 68 m /h 695 55 75 65 Pa 7 cfm 995 95 8 685 inho..6.8. U = Supply voltage f = Frequency n = Speed (rpm) P e = Power input I = Current draw LpA in = Sound pressure level inlet side LwA in = Sound power level inlet side = Air flow = Pressure increase Item no. 8-5-998 ENG Revision 8898 Release 6-8-5 Page / 5
Charts: Air flow 6 Hz pfs [Pa] 5 5 95 9 85 8 75 7 65 6 55 5 5 5 5 5 5 6 pfs @ rho=, kg/m³ qv [CFM] 6 8 qv [m³/h] 8 6 8,56,5,5,5,8,6,,,,8,6,,,,8,6,,,,8,6,,,,8,6,, pfs [InHO] Measurement: LU-6- Air performance measured as per ISO 58 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 7 / LpA measured with m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. Measured values U V f Hz 6 6 6 6 n min - 75 6 P e W 5 5 6 I A.59.6.66.7 LpA in 6 6 6 6 LwA in 7 7 69 7 m /h 8 65 5 Pa 8 cfm 85 96 795 59 inho..6.. U = Supply voltage f = Frequency n = Speed (rpm) P e = Power input I = Current draw LpA in = Sound pressure level inlet side LwA in = Sound power level inlet side = Air flow = Pressure increase Item no. 8-5-998 ENG Revision 8898 Release 6-8-5 Page 5 / 5