LO1 SERIES. compact direct solenoid actuated valves

Similar documents
MICRO-AIR SERIES. miniature direct solenoid actuated valves

Mark 55, SPA55 & PA55 Series

Valve Products ADEX Series Valves

A wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel.

Solenoid Pilot Actuated Valves. 501 Series 502 Series Directional Control Valve 503 Series

5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3

Universal type Port size: M5, Rc1/8, Rc1/4. Max. working. pressure

Direct-operated 2/2-way solenoid valves Type EV210B

40 to 300l/min 14MPa. wpressure adjustment is possible across a wide range, from 0.25 to 14MPa {2.5 to 143kgf/cm 2 }.

The 505F Series 3/4/5-Way Ball Valve. Standard Features and Benefits. Operating Conditions. Specifications. Options

Direct-operated 2/2-way compact solenoid valves Type EV210A

Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)

ORTHOBLOC 3000 Drive systems Maintenance

CF (Conflat Flange) Fittings - Adapters. (505)

CV3000 Series. Characterized Insert Control Valves

P303 Pressure Regulator

PRESSURE GAUGE SELECTORS

Solenoid valves 2/2-way direct-operated type EV210A

2.9. Namur Valves 2.9. page 175. Namur 1/4 also called Namur 1 in accordance to VDI / VDE Namur 1/2 also called Namur 2.

ø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.

Edition 3 September Air Angle Wrench and Nut Runner. QA6 and QA8 Series. Parts Information. Save These Instructions

Basic Features PAR -15 Series Features PAR TM -15 (Patent No. 4,630,632) is a unique 3-Way, programmable, air regulating valve that functions as a pre

Its modular concept allows to build up a ball valve for any degree of automation and any kind of application

Discontinued BL Series, Cross-Reference to MicroKing Series

Attachments. T Type Interface: (T) M5 X 0.8, 1/ 8, 1/ 4, 3/ 8, 1/ 2 Makes it easy to diverge air out with T type interface

Normally Closed (N.C.), Normally Open (N.O.), Common (C.O.)

Pilot operated 2 port solenoid valve (general purpose valve) Standard specifications NC (normally closed) type C C. 2 /s) Starting

Flow rates to 750 l/min

Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00

air and solenoid air operated 5/2-5/3 ISO 5599/01 - Size 2

Flow rates to 750 l/min

Solenoid valve Types EVR 2 - EVR 40

PAR-15 Series. PAR -15 Series Valves

Universal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2

C-Lube Linear Way ML ML MLF

Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.

nufacturing Company, L.P San Felipe, Suite

Instructions for Parts Books

JDV CONTROL VALVES CO., LTD. JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual

SECTION 5 EDI Cartridge Valves

MADILL MBT GRAPPLE RETURN TO INDEX

hard anodized aluminum extrusion die cast aluminium acetalic resin nickel plated steel die cast aluminium nitrile rubber stainless steel 3 Version

Part /Assy Parts List. Production Order. Badge, Perkins/Sabre M215C. Description

Flow rates to 485 l/min

Commercial Generator Parts Catalog. PROTEC Series

PARTS LIST GAS BOILERS MODELS: CG320 (E) CG325 (E) CG330 (E)

Cipriani Harrison Valves Corp.

Size A DIN EN

Element description. Multipass test in compliance ISO Contaminant ISO MTD. A - Microfibre

The v alv e s with plug c onn e ctions in front are p erfera bly us e d on v alv e m o d ule s.

Flow rates to 475 l/min

Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD

2-way proportional throttle valve for block installation

5. DRIVE 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 6. ROW UNIT 7. OPTIONAL EQUIPMENT

98 Series Backpressure Regulators and Relief Valves

507F. Multi-Port Sanitary Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. Pharmaceutical. Bio-Technology.

COMMON BLACK IRON & BLADE PARTS

Single Socket and Horizontal Metering

KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3

Repair Parts List DUEL FUEL RANGE MODEL NUMBER SVD48600BC. When requesting service or ordering parts, always provide the following information:

Application PN 16 / 40 DN Product features. Compact overall height Body shape gives optimum flow characteristic

Flow rates to 485 l/min

Flow rates to 485 l/min

F01 D S F01 F01 F01. Vacuum Ejector Box Type (Built in Silencer)/Body Ported Type Series ZH. How to Order. Product Recommendation.

High Pressure Ball Valves

C Electrical Connector Subsea / Underwater / Marine

Parts List with Exploded Views

AIR PREPARATION. ELECTRONICALLY CONTROLLED PRESSURE REGULATING VALVE (PROPORTIONAL PRESSURE REGULATING VALVE) SERIES control

PN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings

Working pressure. 420 bar. Style T. Style B. Style D Style V Style Z. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.

STAINLESS STEEL MINI-CYLINDER SERIES ISO 6432 Ø mm

Singer. Incremental Comfort Systems. K, EK Vintage F. Last Manufactured: Replacement Parts List No Revision C 04/2012

REPAIR PARTS. GMEC 96% EEM Up Flow Furnace. This manual is to be used by qualified technicians only.

Mounting kits for insulation of power transistors

REPAIR PARTS. GMEC 96% ECM Up Flow Furnace

29 188/ way Proportional Flow Control Valve Model 2 FRE 6./.,Series 2X. Ordering Code: Proportional Flow Control Valve 2 FRE 6 2X K4 V *

REPAIR PARTS. DSZC 16/18 SEER Remote Heat Pump

Safety valve with unit approval type MV..X.., SV..X..

HEAVY DUTY SWING-OUT VALVE

Free Mount Cylinder Double Acting, Double Rod. ø6, ø10, ø16, ø20, ø25, ø32. How to Order. Action. D Double acting. Standard stroke (mm)

7000 SERIES THUMBWHEEL SWITCHES

Features: Specification. Model. Acting type. Tube I.D.(mm) Port size. No. of port. Medium Operating pressure range

Cartridge Valves Technical Information. Quick reference

HEAVY DUTY SWING-OUT VALVE

Conversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs

nufacturing Company, L.P San Felipe, Suite

SRL3. Rodless cylinder. Rodless type. ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100

ISO mm ISO mm. Nl/min. Nl/min. Nl/min. Nl/min. ISO /2 Distributors. ISO Interface. OVERSIZED interface (UNIVER original)

Vortex Flow Meters. RVL Series Vortex Flow Meter

HYDRAULIC POWER PACKS

/2 way valves (solenoid actuated diaphragm with forced lifting) 1/4... 2

M O D U L E - 3A Model A10V0 Piston Pump Manual A10V0 PUMP. Features

2/2-3/2 POPPET VALVES FOR VACUUM (1/8"-6/4") Series AG

/2" Heavy Duty Swing-Out

Nickel-Plated Brass Push-In Fittings - NPTF/INCH

AC Synchronous Motors

Spare parts list UC-M, UC-L, UC-XL

Modular Style Air Combination. Assembled by simply tightening the screws

1.7 Z 411 WAFER TYPE BUTTERFLY VALVE Z 411 TECHNICAL DATA

3.1 HP 111 HIGH-PERFORMANCE BUTTERFLY VALVE HP 111 TECHNICAL DATA

Transcription:

SRS compact direct solenoid actuated valves

0 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T N T................................................... V V O S T O N........................................ V V N S O N S................................................ 4 N O S........................................................... 5 S S O R S....................................................... 6 V V S R V T S.............................................. 7 0 TURS The 0 Series offers high flow in a compact, direct acting solenoid valve. ach 0 features a 4 way, 4 ported design which can be mounted either inline or on a manifold in any position. The 0 also offers an optional side mounted speed control. TURS The Series offers high flow in a compact, direct acting solenoid valve. ach o features a 4-way, 4-ported design which can be mounted either inline or on a manifold in any position. The also offers an optional side-mounted speed control. ie cast zinc multi purpose construction ight indicates when power is supplied to solenoid irect solenoid provides fast response lush non locking manual override Time proven lapped spool and sleeve assembly nline or manifold mounted igh flow capacity in a compact design

0 0 v a l v e s e r v i c e k i t s a n d p a r t s it No. 0 * (for series 0S4) it No. 0 * (for series 0SS4) 4 5 6 7 8 4 5 6 7 4 5 8 9 0 0 9 RQ. PRT N PRT Spring over 04 99 Screw 7 60 Top Plate 05 4 Nameplate 57 * 5 asket 44 6 4 Screw 7 604 7 4 ockwasher 8 6 8 Solenoid ssembly (/4) See hart * 9 Spring 5 0 * 0 umper 4 0 * O Ring Seal 6 4 Sleeve ssembly with Seals 09 78 * 6 Seals 6 4 Valve ody (Not Sold Separately) * 5 etent ody 0 09 RQ. PRT N PRT Valve ody (Not Sold Separately) Top Plate 05 Nameplate 57 * 4 asket 44 5 4 Screw 7 604 6 4 ockwasher 8 6 7 Solenoid ssembly (/4) See hart * 8 O Ring Seal 6 4 * 9 umper 4 0 0 Sleeve ssembly with Seals 09 78 * 6 Seals 6 * etent ssembly 0 it No. 0 * (for series 0SS5) it No. 0 * (for series 0SS6) 4 5 6 7 8 9 4 5 6 7 8 9 0 4 5 6 7 0 4 5 6 7 RQ. PRT N PRT Solenoid ssembly ( nd) See hart dapter 9 4 Valve ody (Not Sold Separately) 4 Top Plate 05 5 Nameplate 57 * 6 asket 44 7 4 Screw 7 604 8 4 ockwasher 8 6 9 Solenoid ssembly (4 nd) See hart * 0 Spring Retainer 6 96 * Spacer 6 97 * Spring 5 9 * Spring Retainer 6 95 4 Sleeve ssembly with Seals 09 7 * 5 6 Seals 6 * 6 umper 4 7 * 7 O Ring Seals 6 4 RQ. PRT N PRT Solenoid ssembly ( nd) See hart dapter 9 4 ody (Not Sold Separately) 4 Top Plate 05 5 Nameplate 57 * 6 asket 44 7 4 Screw 7 604 8 4 ockwasher 8 6 9 Solenoid ssembly (4 nd) See hart * 0 Spring Retainer 6 96 * Spacer 6 97 * Spring 5 9 * Spring Retainer 6 95 4 Sleeve ssembly with Seals 09 74 * 5 6 Seals 6 * 6 umper 4 7 * 7 O Ring Seals 6 4 * ndicates parts included in service kit. Spool & sleeve assemblies sold as precision matched set and include (6) #6 seals; spools are not interchangeable.

0 a c c e s s o r y k i t s S p e e d c o n t r o l k i t 9 58 (s i d e m o u n t e d) 4 T RQ. PRT N PRT * Speed ontrol ody (not sold separately) 5 * asket 44 6 * 4 Screw ssembly 7 67 * 4 etering Screw 8 66 * 5 Pin 0 * 6 O Ring Seal 6 6 * 7 Screw 7 670 * indicates parts included in kit 7 inches 0.0..5 (mm) (7.6) () (4.) P l u g i n c o n n e c t o r a s s e m b l i e s Per N Spec. No. 40050. *ccepts cable diameter 0.40 to 0.0 l a n k s t a t i o n p l a t e k i t 9 58 Plug onnector Type Part No. rey (4) Plug ssembly 0 6 land nut size Pg.9* lack () Plug ssembly 0 64 Plug with 4 V light 0 65 Plug with 0 V light 0 66 Plug with 0 V light 0 67 Normal Polarity = (+) Positive, igh = ( ) Negative, Neutral = hassisround Seal T RQ. PRT N PRT * O Ring Seal 6 06 * Screw 7 669 * lank Station Plate (not sold separately) * indicates parts included in kit inches. 0.8.57 0.40.0 0.06 (mm) (8.5) () (40) (0) (8) (.5) S o l e n o i d c a p s u l e a s s e m b l i e s includes solenoid and end VOT cap assembly + screws and gaskets Override Type Valve unction Wiring Option /4 end 00 5/50 0 0/60 00 0/50 0 40/60 4/50 60 V 4 V lush position ardwired /4 7 87 7 88 7 89 6 0 6 0 non locking position N plug in /4 7 85 7 86 7 87 6 6 6 7 override position ardwired end 7 849 7 850 7 85 6 54 6 55 (standard) position ardwired 4 end 7 840 7 84 7 84 6 08 6 09 position N plug in end 7 84 7 844 7 845 6 66 6 67 position N plug in 4 end 7 88 7 89 7 80 6 6

0 0 v a l v e s direct solenoid actuated plug in N solenoid with indicator light multi purpose 4 ported, 4 way, and position lapped spool and sleeve assembly v to 0.0 /8 NPT or tap ports for unlubricated or lubricated service integral speed control available line or manifold mountable N 4 T e c h n i c a l d a t a Valve ata NPT tap v: /8 = 0.0 /8 = 0.0 low apacity: 9. S @ 80 PS upstream pressure to atmosphere 97 Nl/m @ 6 ar upstream/5 ar downstream Operating Pressure Range: 8 g. Vacuum to 50 PS Vacuum to 0 ar Temperature Range: -0 to +5 ambient - to +46 ambient O p e r a t i n g d a t a ll solenoids are continuous duty rated. V 4V 4 V 50 z. 4 V 60 z. 5 V 50 z. 0 V 60 z. 0 V 50 z. 40 V 60 z. Power (Watts) 6.0 6.0 4..0 5.4 4. 5.0 5.4 olding urrent (mps.) 0.5 0.5 0.00 0.04 0.6.05 0.04 0.04 nrush urrent (mps.) N/ N/ 0.05 0.045 0.0.09 0.04 0.04 Time to Position, Single, Spring Return 0.0 0.0 0.008 0.008 0.008 0.008 0.008 0.008 energize in Position, ouble, etented 0.0 0.0 0.008 0.008 0.008 0.008 0.008 0.008 seconds Position, Spring entered 0.0 0.0 0.00 0.00 0.00 0.00 0.00 0.00 Time to Position, Single, Spring Return 0.006 0.006 0.00 0.00 0.00 0.00 0.00 0.00 e energize Position, ouble, etented N/ N/ N/ N/ N/ N/ N/ N/ in seconds Position, Spring entered 0.006 0.006 0.0 0.0 0.0 0.0 0.0 0.0 0 m o d e l s e l e c t i o n t a b l e Valve unction 0S4 4 4 0SS4 4 4 0SS5 4 4 0SS6 4 4 Wiring ardwired without speed control 0S459O 0S459 0SS459O 0SS459 0SS559O 0SS559 0SS659O 0SS659 ardwired with speed control Plug in N * without speed control Plug in N * with speed control 0S487O 0S487 0SS487O 0SS487 0SS587O 0SS587 0SS687O 0SS687 0S459 0S4594 0SS459 0SS4594 0SS559 0SS5594 0SS659 0SS6594 0S487 0S4874 0SS487 0SS4874 0SS587 0SS5874 0SS687 0SS6874 tap options: or tap ports, add a to the model number. XP: 0S4594 * or N plug in solenoids, order Plug ssemblies separately see page 0 6. 0-

0 v a l v e d i m e n s i o n s p o s i t i o n m o d e l s 0S4 a n d 0SS4 0. (7.9) /8 NPT or /8 Ports (4) 0.97 (4.6) 0.49 (.5) 0.59 (5).9 (0.). (59.).0 (58.4). (79.) 4.60 (7).5 (4.) 0.4 (0.7) 0.90 ().08 (7.4) Single Solenoid 0S4 ouble Solenoid 0SS4 Speed control shown in phantom dimensions = inches (in parenthesis = mm) 0 v a l v e d i m e n s i o n s p o s i t i o n m o d e l s 0SS5 a n d 0SS6 0. (7.9) /8 NPT or /8 Ports (4) 0.97 (4.6) 0.49 (.5) 0.59 (5).9 (0.). (59.).7 (60.) 4.86 ().5 (4.) 0.4 (0.7) 0.90 ().08 (7.4) Speed control shown in phantom dimensions = inches (in parenthesis = mm)

0 0 m a n i f o l d m o u n t i n g s common supply, common exhaust /4 NPT or tap ports one piece extrusions for to stations anifold # stations stations 06 8 06 8 /4 NPT /4 im im stations 06 8 06 84 4 stations 06 84 06 85 5 stations 06 85 06 86 6 stations 06 86 06 87 7 stations 06 87 06 88 8 stations 06 88 06 89 9 stations 06 89 06 840 0 stations 06 80 06 84 stations 06 8 06 84 stations 06 8 06 84 ounting it 9 58.84 (7).94 (00) 5.0 (8) 6. (56) 7. (84) 8. () 9.4 (9) 0.5 (67).6 (95).7 ().80 (5).5 (64).6 (9) 4.7 (0) 5.8 (48) 6.9 (76) 8.0 (0) 9. () 0.0 (59).0 (87).9 (5).49 (4) Order () mounting kit for each station on the manifold. ncludes all studs, seals, & screws. a c t o r y a s s e m b l e d m a n i f o l d s ist in order, left to right, beginning with Station. xample: ssembly it:* 0 Station : 0SS587 0/60 Station : 0SS459 0/60 Station : 0S459 0/60 SS 0 No. of Stations Port Type lank = NPT galleries = tap galleries/metric conduit = tap galleries/npt conduit ncludes assembly and testing for proper operation. ue to flow, wiring, and practical assembly limitations, a maximum of stations per assembly is recommended. 0 m a n i f o l d d i m e n s i o n s above above 0.9 () 0.45 (.4) 4.86 ().69 (4) 0.84 (.) 0.6 (6).4 (79.7) 4.60 (7) 0.0 (5.).0 (8).0 (5.) /4 NPT or /4 ports () (oth nds) 4 0 anifold NS iagram 4 4 position 0SS5 /8 NPT or /8 ylinder Ports position 0SS4 N 0.75 (9) O.94 (49.) P.0 (76.5) dim = in. (mm) 4 4 4 Supply xhaust N O P