Flat Strap Clamp Material: Medium carbon steel, Hardened and Tempered : T1-FSC IS: - 4 D x L A B K S T1-FSC- x 0. T1-FSC- x 0. T1-FSC- x 0. T1-FSC-1 x 1 0. T1-FSC-1 x 1 M 1.00 T1-FSC-1 x 0 M 1. T1-FSC-0 x 0 M. T1-FSC-0 x 0 M. T1-FSC-0 x 0 3. T1-FSC-0 x 0 5 4. T1-FSC-3 33 x 0 M 4. T1-FSC-333 33 x 3 4 0 M.0 T1-FSC-3 x 3 0 1. T1-FSC-3 x 3 0 0. T1-FSC-0 x 0 0 1. U Clamp Due to openness of the slot, clamp can be inserted/ removed without disturbing the clamping system : T1-UC IS: 3-4 D x L A B T1-UC- x 0. T1-UC-1 x 1 0. T1-UC-0 x 0 0. T1-UC-1 x 0 M 1. T1-UC-1 x 0 M 1. T1-UC-0 x 0 5 M 1. T1-UC-0 x 0 M 3.00 T1-UC-0 x 0. T1-UC-0 x 0.5 T1-UC-3 33 x 0 4 4 M 3. T1-UC-333 33 x 3 4 M 4. T1-UC-330 33 x 0 4 M.05 T1-UC-330 33 x 0 4 M. T1-UC-0 x 0 5.00 T1-UC-0 x 0 5.5 T1-UC-0 x 0 5. 0
Slotted Clamp : T1-SC IS: - 5 D x L A B K S T1-SC- x 0. T1-SC-15 x 5 0. T1-SC- x 0. T1-SC-1 x 1 0. T1-SC-1 x 1 M 0.5 T1-SC-5 x 5 M 1.00 T1-SC-0 x 0 M 1. T1-SC-0 x 0 M 1. T1-SC-0 x 0.5 T1-SC- x 3. T1-SC-3 33 x 0 M 4. T1-SC-330 33 x 0 5 M 5. Serrated Strap Clamp Applications: On machines for work holding in combination with Universal Serrated Blocks (Type: T3-USB) for instant height adjustment. : T1-SSC D x L A B K S DIN: 3 Z T1-SSC- x 0. T1-SSC- x 0. T1-SSC- x 0. T1-SSC-1 x 1 0. T1-SSC-1 x 1 M 0.0 T1-SSC-1 x 0 M 1. T1-SSC-0 x 0 M 1. T1-SSC-0 x 0 M. T1-SSC-0 x 0. Goose Neck Clamp : T1-GNC IS: - D x L A B H K S T1-GNC- x 0. T1-GNC-1 x 1 0. T1-GNC-1 x 0 4 M 1. T1-GNC-0 x 0 M. T1-GNC-0 x 0 5.00 T1-GNC-3 33 x 0 1 M 5. T1-GNC-333 33 x 3 1 M.0 T1-GNC-0 x 0 1 5 1.0 03
Press Tool / Milling Clamp Material Clamping Pad: High tensile S.G. Iron Enamelled in Flame Red Colour : T1-PTMC Suitable for T-Slot Clamp Width Length Range T-Bolt type in kg (Full Set) T-Bolt, HN: Medium Carbon Steel, Hardened and tempered to - HRC and Chemically Blackened T1-PTMC- T1-PTMC- T1-PTMC- 0 0-0- 0- T-TB- T-TB- T-TB-1 0. 0. 1. Swivel Nut: Medium Carbon Steel Chemically Blackened T1-PTMC- T1-PTMC- 0 0 0-0- T-TB-1 T-TB-0 1. 1. T1-PTMC- 1 0- T-TB-1. Applications : T1-PTMC- 1 0-0 T-TB-0.5 - On Presses for holding tools, dies - On Machine beds for holding flat components, castings. T1-PTMC- T1-PTMC- T1-PTMC- 1 0-0 0-0 0-0 T-TB-0 T-TB- T-TB-.0 4. 4.5 Press Mould Clamp Material: Clamp, Fulcrum and Saddle: High tensile S G Iron, Enamelled in Flame Red colour. T-Bolt, Flanged Hex Nut: Medium Carbon Steel Hardened and tempered to - HRC and Chemically Blackened. : T1-PMC T-Slot in mm D x S L x B A K Clamping Range in mm T -Bolt Size. Applications : On Presses, Plastic Moulding machines, Milling and Drilling Machines. T1-PMC-1/ T1-PMC-1/ T1-PMC-1/ T1-PMC-/ T1-PMC-/ x 1 0 x 0 - x 5 0 x 5 0-0 x x 1L x x 1L M x x 1L M x x 0L M x x 0L 1. 1. 1. 3. 3. Note: T1-PMC is supplied with T-Bolt as standard. Clamping Stud is optional. T1-PMC-/ T1-PMC-3/ T1-PMC-3/ x 1 x 5 33 0 - M x x 0L x x 0L x x 0L 3. 4.5 4.5 04
Quick Clamp Material: Clamp and Saddle: High tensile S G Iron, Enamelled in Flame Red colour. T-Bolt, Flanged Hex Nut: Medium Carbon Steel Hardened and tempered to - HRC and Chemically Blackened. Applications : On Presses, Plastic Moulding machines, Milling and Drilling Machines and CNC Machining Centres. : T1-QC T-Slot in mm. Note: T1-QC is supplied with T-Bolt as standard. Clamping Stud is optional. T1-QC-1/ T1-QC-1/ T1-QC-1/ T1-QC-/ T1-QC-/ T1-QC-/ T1-QC-3/ T1-QC-3/ DxS LxB A K Clamping Range in mm x 5 0 x 0 - x 5 x 1 0 x 5 x 5 0 - T -Bolt Size x x 1L 1. x x 1L 1. M x x 1L 1. M x x 0L.00 M x x 0L. M x x 0L. x x 0L 3. x x 0L 3. 0 - Mould Clamp with Heavy Support Bolt Mould Clamp offers counter height adjustment by heavy duty support bolt with hex, round base and lock nut. Material: Medium Carbon Steel, Hardened and tempered to - HRC and Chemically Blackened Applications : Plastic Moulding machines Note: T1-MCH is supplied with the Clamp, Support Bolt and Lock Nut. T-Bolt/Stud, Hex Hi-Nut and Washer are optional. : T1-MCH Bolt Size A B DxL S T K H E x 1 M T1-MCH-1S T1-MCH-1L M x L x M x 0L T1-MCH-0S x 0 M 0. 0. M x L M 1. x T1-MCH-0L M x 0L 1. T1-MCH-0S M x L 1. M x 0 0 M T1-MCH-0L x M x 0L T1-MCH-0S 1. x L M x 0 T1-MCH-0L T1-MCH-0S M x 0 0. x x L T1-MCH-0L 05 Support Bolt GxJ Hex A/F x Base. x L. x x L T1-MCH-0 M x 0 1 x L x 3..0 T1-MCH- x 0 5 M M x L x 5.00
Double Ended Clamp : T1-DEC IS: -5 D x L A B T1-DEC- x 0. T1-DEC-15 x 5 0. T1-DEC- x 0. T1-DEC-1 x 1 0. T1-DEC-1 x 1 M 1.00 T1-DEC-1 x 0 M 1. T1-DEC-0 x 0 M 1. T1-DEC-0 x 0 M 3. T1-DEC-0 x 0 3. T1-DEC-0 x 0 4.00 T1-DEC-330 33 x 0 M 4. T1-DEC-3 33 x 0 M 5.00 T1-DEC-333 33 x 3 M. Plain Clamp : T1-PC IS: 1-5 D x L A B T1-PC- x 0. T1-PC- x 0. T1-PC- x M 0.5 T1-PC-1 x 1 M 1. T1-PC-0 x 0. T1-PC-330 33 x 0 M 4. Flanged Hex Nut : T-FHN IS: - T-FHN- T-FHN- T-FHN- T-FHN- T-FHN-3 T-FHN- T-FHN-5 T-FHN- D1 D M A S M M M 3.5 3 5 4 4 5 54 4 0.0 0.0 0.0 0.0 0.0 0.0 0.4 0.0 0
Forged T-Bolt to. Grade as per IS: -0 (Part III) and Chemically Blackened. Note: We can manufacture non-standard T-Bolts in.,. and. Grade as per given drawings on request. : T - TB IS: - T-TB- T-TB- T-TB- T-TB- T-TB- T-TB- T-TB- T-TB- T-TB- T-TB-15 T-TB- T-TB- T-TB-1 T-TB-1 T-TB- T-TB- T-TB- T-TB- T-TB- T-TB-1 T-TB-0 T-TB-0 T-TB-0 T-TB- T-TB- T-TB- T-TB-1 T-TB-0 T-TB-0 T-TB-0 T-TB- T-TB- T-TB- T-TB-1 T-TB-1 T-TB-1 T-TB-1 ØD M M M M M M M M M M M M M M T-SLOT Size T L 1 0 0 1 0 0 0 1 0 0 0 1 0 0 0 K L1 A x B 1 1 0 1 0 1 0 x 0.0 x 0.0 x 0.0 x 0.0 x 0.0 x 0.0 x 0.0 x 0.0 x 0.0 x 0.0 x 0.0 x 0. x 0. x 0. x 0. x 0. x 0. x 0. x 0. x 0. x 0. x 0. x x x x x x x x x x x x x x x Wt. kg 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. : T - TB IS: - T-TB- T-TB- T-TB-1 T-TB-0 T-TB-0 T-TB-0 T-TB-3 T-TB- T-TB- T-TB-1 T-TB-0 T-TB-0 T-TB-0 T-TB-3 T-TB- T-TB-1 T-TB- T-TB- T-TB- T-TB-3 T-TB-0 T-TB- T-TB-1 T-TB- T-TB- T-TB- T-TB-3 T-TB- T-TB-1 T-TB-3 T-TB-3 T-TB-3 T-TB-3 T-TB-3 T-TB-4 T-TB-0 T-TB-4 T-TB-3 T-TB-0 ØD M M M M M M M M M M M M M M M M M M M M T-SLOT Size T L 1 0 0 0 3 1 0 0 0 3 1 0 0 0 3 0 1 0 0 0 3 0 1 0 0 0 3 0 0 0 0 3 0 K L1 A x B 5 1 1 0 0 5 1 1 0 0 5 1 1 0 0 5 1 1 0 0 1 5 0 0 0 0 1 0 0 x x x x x x x x x x x x x x x x x x x x x x x x x x Wt. kg 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.5 1.00 1. 1. 0. 0. 0.5 0.5 1. 1. 1. 1. 1. 1. 1.0.05...0 3.00 3. 3. 0
T Nut : T-TN IS: - T-TN- T x ØD x M A K B x L x 0.0 T-TN- x x 0.0 T-TN- x x 0.0 T-TN- x x 0.0 T-TN- x x 0.0 T-TN- x M x 0.0 T-TN- x M x 0.1 T-TN- x M x 0.0 T-TN- x M x 0.5 T-TN- x M x 0.5 T-TN- x M x 0. T-TN- x 0.3 T-TN- x M 44 0.0 T-TN- x 5 x 1.000 Hex Hi-Nut : T-HN DIN: 3 T-HN- ØD x A x S 0.0 T-HN- x 0.0 T-HN- x 0.0 T-HN- M x 0.0 T-HN- Mx 0.1 T-HN- x 0.5 T-HN- M x 4 0.0 T-HN-34 x 54 0. Extension Nut : T-EN DIN: 334 T-EN- ØD x A x S 0.0 T-EN- x 0.0 T-EN- x 0.0 T-EN- M x 0.1 T-EN- M x 0. T-EN- x 0.0 T-EN-0 M x 0 4 0. T-EN- x 1.4 0
Rhombus T-Nut : T-RTN T-RTN- T-RTN- T-RTN- T-RTN- T-RTN- T-RTN- T-RTN- T-RTN- T-RTN- T-RTN- T ØD A K B T-RTN- 0.0 M M M M M M 44 5 44 54 0.0 0.0 T-RTN- M 0.0 0.0 0.0 0.1 0.5 0.1 0.0 0.5 0.0 Clamping Stud to. grade as per IS : 0 (Part III) and Chemically Blackened. Note: Other sizes/grades available on request. : T-CS IS: - 1 T-CS- T-CS- T-CS-3 T-CS- T-CS- T-CS- T-CS-3 T-CS- T-CS- T-CS-1 T-CS- T-CS-13 T-CS- T-CS- T-CS-1 T-CS-1 T-CS- T-CS-3 T-CS- T-CS- T-CS-1 ØD x L x x x 3 x x x x 3 x x x 1 x x 3 x x x 1 x 0 x 0 M x 3 M x M x M x 1 L1 L 0.0 0.0 0.0 0.0 3 0.0 0.0 0.0 0.0 3 0.0 0.0 0.0 0.0 0.0 3 0.0 0.05 0.1 1 0.0 0.05 0.5 3 0.5 0.1 : T-CS IS: - 1 T-CS-0 T-CS-0 T-CS-0 T-CS- T-CS- T-CS-1 T-CS-0 T-CS-0 T-CS-0 T-CS-3 T-CS-0 T-CS-0 T-CS- T-CS-1 T-CS- T-CS- T-CS- T-CS-3 T-CS-0 T-CS-0 ØD x L M x 0 M x 0 M x 0 M x M x M x 1 M x 0 M x 0 M x 0 M x 3 M x 0 M x 0 x x 1 x 0 x 0 x 0 x 3 x 0 x 0 L1 L 0.0 1 0. 0 0.3 0.1 3 0. 0.5 0.3 1 0.4 0 0.5 0 0. 0 0. 3 1.05 0.0 0.3 0.40 1 0. 0 0. 0 0. 0 1. 3 1.5 : T-CS IS: - 1 ØD x L L1 L T-CS-1 T-CS-0 T-CS-0 T-CS-0 T-CS-3 T-CS-0 T-CS-0 T-CS-0 T-CS-3 T-CS-3 T-CS-3 T-CS-3 T-CS-3 T-CS-3 T-CS-0 M x 1 M x 0 M x 0 M x 0 M x 3 M x 0 M x 0 M x 0 x 0 x 0 x 0 x 3 x 0 x 0 x 0 5 1 0 0 0 3 0 1 0 0 0 3 0 0.4 0. 0. 1.0 1.4 1..5 3.4 0. 1.1 1.4 1..3. 4.1 0
Plain Washer ( Thick ) Material: Low carbon steel, Case hardened to - HRC and Chemically Blackened. : T3-PW-DIN DIN: 3 T3-PW-DIN- T3-PW-DIN- T3-PW-DIN- T3-PW-DIN-M T3-PW-DIN-M T3-PW-DIN-M T3-PW-DIN- T3-PW-DIN-M T3-PW-DIN- A D B 3.4.5 4 0.01 4 0.0 5 0.04 5 0.05 0.0 0.0 0. 0. 0. Spherical Washer with Conical Seat Material: Low carbon steel, Case hardened to - HRC and Chemically Blackened. : T3-SWCS IS: - T3-SWCS- T3-SWCS- T3-SWCS- T3-SWCS- T3-SWCS- T3-SWCS- T3-SWCS- T3-SWCS- SIZE d1 d h1 d3 d4 h M M M.4.5 3 44 5 3. 4.0 4. 5.3.3.... 3..5.5 3 4 3.5 4. 5.0..5.5 0.005 0.0 0.0 0.0 0.0 0.5 0. 0.4 C Washer Material: Low carbon steel, Case hardened to - HRC and Chemically Blackened. : T3-CWN IS: 1 - T3-CWN- T3-CWN- T3-CWN- T3-CWN-M T3-CWN-M T3-CWN- T3-CWN-M T3-CWN- A D B A1 T 34 5 4 0.4.5 3 3 5 1 0.0 1. 1. 1. 0.04 0.05 0. 0. 0. 0..5 0.
Supporting Height Plates Material: Rolled sheet, Flattened and Chemically Blackened. Applications: Desired clamp support height achievable by swinging of top plates in steps of mm/4mm. Blocks of the same group can be stacked one above another to achieve increased height. Precise height adjustment is possible with the help of smooth sliding block (T3-SSB) Note: For higher sizes, the base is broadened for stability. B x L x T : Plate size B x C : Clamp rest area : T3-SHP T3-SHP-4 x T3-SHP-4 T3-SHP-4 T3-SHP-4 T3-SHP-41 T3-SHP- T3-SHP- T3-SHP- T3-SHP-0 T3-SHP- T3-SHP-00 T3-SHP- T3-SHP- T3-SHP-W T3-SHP-W00 T3-SHP-W T3-SHP-W A B x L B x C T 1 0 0 1 0 1 0 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 4 0. 4 1. 4 1. 4.0 4 3. 4 4. 4 5.0 0. 0. 1.00. 3.00 3... 3. 3. Universal Serrated Block Applications: Combinations of 3 sizes in each group offers instant height adjustment for work support. Also recommended for use along with serrated strap clamp (Type: T1-SSC) : T3-USB Height Adjustment A B x L Minimum Maximum T3-USB-001 T3-USB-00 T3-USB-003 T3-USB-004 T3-USB-005 T3-USB-00 x 33 x x 1 x 33 x x 1 0. 0.. 0. 0.0 3. Self Aligning Ball Element Material: Ball: Hardened and tempered steel Body: Toughened Steel, Chemically Blackened Features: The self aligning serrated ball set into the socket adjusts to the plane of the working surface while clamping. : T3-SBE D1 D D3 S L H T3-SBE- T3-SBE- T3-SBE- T3-SBE- T3-SBE- T3-SBE- T3-SBE- M M M 41 41 0.01 0.01 0.05 0.05 0. 5 0. 0.
Smooth Sliding Block The Smooth Sliding Block is a device for fine and stepless height adjustment. Material: Medium Carbon Steel, Top slide hardened and Tempered to - HRC and Chemically Blackened Applications :SSB is recommended for use with Supporting Height Plates (T3-SHP). The SHP offers height adjustment in steps of mm/4mm and the SSB offers stepless height adjustment to precisely desired heights. : T3-SSB Size in mm B x H x L Height Variation in mm use with T3-SHP of type Plate width of T3-SHP T3-SSB- x x 3, 0, 0. T3-SSB- x x 5 00,, 0. T3-SSB- x x 5 4, 4, 4 4 0. T3-SSB- x x 5 5 W, W00 W, W 1. T3-SSB-34 x x 5 5 4, 41, 4 1. Smooth Sliding Block - Levelling Jack B Light Duty L Heavy Duty H 0=5 ~ Material: Body and Slides: Hi Tensile S.G. Iron Operating Screw: Alloy Steel. Grade Applications : Heavy Work Loading, Precise Height Adjustment : T3-SSB-LD T3-SSB-LD-0 T3-SSB-LD-03 T3-SSB-LD-05 T3-SSB-LD- L x B x H 1 x 0 x 1 x 0 x x 5 x 1 x 5 x 1 Height Variation in mm 0-5 0-5 0-5 0-5 Load Capacity In Tonnes 3 5 (approx.) 0 : T3-SSB-HD Height Variation in mm Load Capacity In Tonnes T3-SSB-HD- 0 - Note: Handle provided for easy lifting of the Jack (approx.) #/1, th Cross, Byatarayanapura, Mysore Road, Bengaluru: 50, Karnataka, India Tel : +1 4 / 1 Fax: +1 4 Email: tisaenterprises@gmail.com Website: www.tisaclamp.com