Section > UNION Series > TIES Series > FIXO Series > CABLO Series > FASTY Series > RAILDIN Series 22 23
> CABLE GLANDS WITH DEVICE TO PREVENT ANY UNSCREWING UNION Series B (*) IP8 (1 bar) C A in mm A B C ø fixing hole cable size ø spanner size thread length Spanner coupler (N/m) nut seal Fixing TYPE A (metric HD ) With nut Heavy duty RAL 00 grey Without nut With diaphram and nut With diaphram without nut Locknuts Heavy duty RAL 00 grey Seals PG 3 80.330 0/00 80.330 0/00 80.330.0 0/00 80.330.1 0/00 80.330.2 0/00 80.330 0/00 80.330 0/00 80.3390 0/00 PG9 1 8 80.331 0/00 80.331 0/00 80.331.0 0/00 80.331.1 0/00 80.331.2 0/00 80.331 0/00 80.331 0/00 80.3391 0/00 PG11 22, 80.3 2/00 80.3 2/00 80.3.0 2/00 80.3.1 2/00 80.3.2 2/00 80.3 0/00 80.3 0/00 80.3392 0/00 PG THREAD PG, PG1 PG21 PG29 21 23 29 3, 1 2 2 2 33 2 1 9 1, 80.333 2/00 80.33 2/300 80.33 2/00 80.33 2/30 80.333 2/00 80.33 2/300 80.33 2/00 80.33 2/30 80.333.0 2/00 80.33.0 2/300 80.33.0 2/00 80.33.0 2/30 80.33 2/00 80.33.1 2/300 80.33.1 2/00 80.33.1 2/30 80.333.2 2/00 80.33.2 2/300 80.33.2 2/00 80.33.2 2/30 80.333 0/00 80.33 0/00 80.33 0/00 80.33 0/00 80.333 0/00 80.33 0/00 80.33 0/00 80.33 0/00 80.3393 0/00 80.339 0/00 80.339 0/00 80.339 0/00 PG3, 22 3 1, 1 80.33 / 80.33 / 80.33.0 / 80.33.1 / 80.33.2 / 80.33 0/00 80.33 0/00 80.339 0/00 PG2, 30 38 0 1 80.338 /0 80.338 /0 80.338.0 /0 80.338.1 /0 80.338.2 /0 80.338 0/00 80.338 0/00 80.3398 0/00 PG8 0 3 8 20 1 80.339 /0 80.339 /0 80.339.0 /0 80.339.1 /0 80.339.2 /0 80.339 0/00 80.339 0/00 80.3399 0/00 Mx1. 3 80. 0/00 80. 0/00 80..0 0/00 80..1 0/00 80..2 0/00 80. 0/00 80. 0/00 80.9 0/00 M1x1. 1 8 80.1 0/00 80.1 0/00 80.1.0 0/00 80.1.1 0/00 80.1.2 0/00 80.1 0/00 80.1 0/00 80.91 0/00 METRIC THREAD M20x1. M2x1. Mx1. M0x1. 20 2 0 22 2 2 33 2 3 1 1, 9 1, 11, 80.20 2/00 80.2 2/00 80. 2/30 80.0 / 80.20 2/00 80.2 2/00 80. 2/30 80.0 / 80.20.0 2/00 80.2.0 2/00 80..0 2/30 80.0.0 / 80.20.1 2/00 80.2.1 2/00 80..1 2/30 80.0.1 / 80.20.2 2/00 80.2.2 2/00 80..2 2/30 80.0.2 / 80.20 0/00 80.2 0/00 80. 0/00 80.0 0/00 80.20 0/00 80.2 0/00 80. 0/00 80.0 0/00 80.920 0/00 80.92 0/00 80.9 0/00 80.90 0/00 M0x1. 0 30 38 0 11, 80.0 /0 80.0 /0 80.0.0 /0 80.0.1 /0 80.0.2 /0 80.0 0/00 80.0 0/00 80.90 0/00 M3x1. 3 3 8 1 11, 80.3 /0 80.3 /0 80.3.0 /0 80. /0 80.3.2 /0 80.3 0/00 80.3 0/00 80.93 0/00 1/ 3 80.30 0/00 80.30 0/00 3/8 1 8 80.31 0/00 80.31 0/00 GAS THREAD 1/2 /8 3/ 1 1.1/8 1.1/2 2 21 23 29 3, 3,, 0 22 3 1 2 2 2 2 33 2 2 3 8 1 1, 20 9 1 1, 1 1 80.33 80.3 80.3 80.3 80.3 80.38 80.39 2/00 2/300 2/00 2/30 / / /0 80.33 80.3 80.3 80.3 80.3 80.38 80.39 2/00 2/300 2/00 2/30 / / /0 (*) Cable glands are provided without gasket: STANDARD version: HEAVY DUTY version or IP8 (1 bar) if installed with corresponding seal. CABLE GLAND TABLE: METRIC/PG/GAS 1 2 3 8 9 11 1 1 1 20 21 22 23 2 2 2 2 28 29 30 31 33 3 3 3 3 38 39 0 1 2 3 M3 M0 M0 PG8 M PG2 M2 PG3 M20 PG29 GAS 2 M1 PG21 GAS 1.1/2 M PG1 GAS 1.1/8 PG, GAS 1 PG11 GAS 3/ PG9 GAS /8 PG GAS 1/2 GAS 3/8 GAS 1/ 1 2 3 8 9 11 1 1 1 20 21 22 23 2 2 2 2 28 29 30 31 33 3 3 3 3 38 39 0 1 2 3 2 2
> NUTS AND CAPS UNION Series IP IP A Thread 80.333 22mm PG21 PG PG9 PG11 Ø fixing hole 1 Cable sleeves ( ) Glow wire 0 C Cable sleeves ( ) Glow wire 90 C Couplers (with nut and seal) Heavy duty Blanking plug 80.3380 0/00 80.3381 0/00 80.3382 0/00 80.333 80.333 80.22 80. 80.20 80.30 2.8mm 38.mm.mm.mm 33.mm 33.mm PG29 PG3 M 2X1. M 2X1. M 0x1. M 0x1. PG THREAD PG, PG1 PG21 PG29 21 23 29 3 80.330 0/00 80.331HF 0/00 80.330 0/00 80.33HF 0/00 80.330 0/00 80.331 0/00 80.33 0/00 80.333 /0 80.333 /0 80.3383 0/00 80.338 0/00 80.338 0/00 80.338 0/00 PG3, 80.330 2/200 80.333 /2 80.338 2/20 PG2, 80.3388 2/20 PG8 0 80.3389 2/20 Mx1. 80.8 0/00 M1x1. 1 80.81 0/00 METRIC THREAD M20x1. M2x1. Mx1. M0x1. 20 2 0 80.22 /0 80.20 /2 80. /0 80.30 /2 80.820 0/00 80.82 0/00 80.8 0/00 80.80 2/20 M0x1. 0 80.80 2/20 M3x1. 3 80.83 2/20 ( ) SCABOX Series type. ( ) CUBIK Series type. 2 2
> CABLES TIES FOR INDOOR WIRING TIES Series > CABLES TIES FOR INDOOR WIRING TIES Series mm Grip capacity minmax Ø mm Tensile strength Kg 2, x 0,, 0/2000 839.2080 839.2080 x 9 1 21 8,1 0/2000 839.20 839.20 x 1 8,1 0/2000 839.20 839.20 2, x 1 0 8,1 0/2000 839.2 839.2 2, x 200 1 0 8,1 0/2000 839.2200 839.2200 3, x 2 3,2 0/2000 839.3 839.3 3, x 200 2 0,2 0/2000 839.00 839.00 3, x 290 2 80,2 0/2000 839.3300 839.3300 3, x 30 2 3,2 0/2000 839.330 839.330,8 x 2 22, 0/2000 839.0 839.0,8 x 200 3 0 22, 0/2000 839.200 839.200,8 x 20 3 8 22, 0/2000 839.20 839.20,8 x 290 3, 9 22, 0/2000 839.300 839.300,8 x 30 3, 3 22, 0/2000 839.30 839.30,8 x 30 3, 1 22, 0/2000 839.30 839.30,8 x 0 3,,8 0/2000 839.200 839.200,8 x 300 80,8 0/2000 839.290 839.290,8 x 3 8 0,8 0/2000 839.30 839.30 9 x 80 233 1, 0/00 839.80 839.80 Good resistance to external agents: oil, grease, oil derivatives, alcohol, saline mist and chlorates. Do not withstand UV rays. mm Grip capacity minmax Ø mm Tensile strength Kg x 1 ( ) 2 2 0/2000 839.39/1 x 1 ( ) 28 0/2000 839.39/1 9 x 0 ( ) 22 8 0/2000 839.39/90 9 x 0 ( ) 2 8 0/2000 839.39/90 9 x 2 30 0 1 0/2000 839.39/920 9 x 30 30 93 1 0/2000 839.39/930 ( ) RILSAN. Good resistance to external agents: oil, grease, oil derivatives and saline mist. LOADING DIAGRAM Load (kg) Load at breakingpoint Load yielding point SCAME CABLE TIES LOADELONGATION CURVE 1 2 3 Breaking Withstands UV rays. Rounded edges to avoid cutting into cable insulation. ADHESIVE SUPPORT VIBRATION RESISTANT SUPPORT Elongation yielding point Elongation breakingpoint Elongation (%) DESCRIPTION OF LOADING DIAGRAM zones with different characteristics are clearly distinguished: 1) Elastic elongation (area of use). The cable tie is subjected to traction forces and lengthens, elastically. When the forces are taken away, the tie returns to its initial state, without any alteration of its physical characteristics. 2) Stretching of the molecular links. The tie is subjected to such a load that some of the intermolecular links are broken. The elastic properties are altered. 3) Permanent deformity. All the intermolecular links are broken. ) Breakingpoint. Length at which the tie breaks. 28 29
> FASTENING ACCESSORIES FOR CABLE TIES TIES Series > SPRUNG CEILING HOOKS FIXO Series Selfadhesive cable tie base Screwin cable tie base antivibration Max. cable tie width:.8 mm. Max cable tie width Fixing Screw 28,x28,mm.8mm 0/00 839.39/0,x2mm.8mm M 0/00 839.39/3 Thread With open hook and nut M 0/00 8. With screw, washer and nut M 0/00 8./1 With washer and 2 nuts M 0/00 8./2 To install, fold down the tabs and push them into a mm hole in the ceiling. Once through, the tabs open up and are anchored in the ceiling. Made of metal. Dimens. Max cable Board tie width Depth thickness > FIXING PLUGS FIXO Series Wall anchor base 8mm 9mm 0mm 0/00 839.39/1 Panel clipon base,mm max.8mm 3mm max > PLIERS FOR CLAMPING AND TRIMMING CABLE TIES 0/00 839.39/2 TIES Series With screws With screws mm ø 0/2000 ø 1, 3 8. 3,0 x 2 8.1 ø 0/2000 ø 8.,0 x 2 8.1 ø 0/2000 ø 3, 8., x 0 8.1 ø 0/2000 ø 8., x 0 8.1 ø 8 0/2000 ø, 8.8,0 x 0 8. ø 0/2000 ø 8 8.,0 x 0 8.1 Suitable for all type of screws (for wood, metal, concrete etc.). Made of thermoplastic material. Stainless steel screws. Without screws For screws size mm mm Suitable for all cable tie types 1/20 839.39/ Made of red stoveenamelled steel. SPRUNG HOOK FIXING PLUG 280 281
> CABLE SHEATHS CABLO Series > SPIRAL CABLE BINDING CABLO Series inside Ø mm inside Ø mm Outside Ø 2 200/0 8.002 3 200/2000 8.003 0/00 8.00 0/00 8.00 0/800 8.00 0/800 8. 0/00 8.00 8 0/00 8.008 9 0/00 8.009 0/00 8.0 0/30 8.0 1 0/300 8.01 1 2/200 8.01 2/200 8.0 20 2/1 8.020 22 2/0 8.022 2 2/0 8.02 2 2/0 8.02 28 2/0 8.028 30 20/0 8.030 3 20/0 8.03 0 20/0 8.00 Made of selfextinguishing, soft and flexible insulated thermoplastic material. 0. 1mm thick. 2 2/00 8.03 2/00 8.0 8 2/00 8.0 8 2/00 8.08 2/200 8. 1 20/ 8. 1 1 20/0 8.1 Made of selfextinguishing, soft and flexible, insulated thermoplastic material. 282 283
Cable clips > FLAT CLIPS FASTY Series > INSULATED PINS FASTY Series For cables with width 3, 0/000 830.30/P3 830.30/P3G 0/3000 830.30/P 830.30/PG 0/000 830.30/P 830.30/PG 8 0/3000 830.30/P8 830.30/P8G 11 0/00 830.30/P11 830.30/P11G 0/00 830.30/P 830.30/PG Pins made of hardened and nickelplated steel. Clips made of thermoplastic material. Preinserted pins. Ø 1, x 1 Packet with 0 pieces 0/00 8.2 > ROUND CLIPS FASTY Series For cables Pin Ø 3 1,8 x 0/000 830.30/3 830.30/3G Ø 2 x 21 0/000 830.30/ 830.30/G Ø 2 x 21 0/000 830.30/ 830.30/G Ø 2 x 21 0/000 830.30/ 830.30/G Ø 8 2 x 21 0/000 830.30/8 830.30/8G Ø 2 x 2 0/000 830.30/ 830.30/G Ø 2 x 2 0/3000 830.30/G Ø 1 2 x 2 0/3000 830.30/1G Ø 1 2 x 3 0/000 830.30/1G Ø x 0/3000 830.30/G Ø 22 x 0/00 830.30/22G Ø 2 2, x 0 0/00 830.30/2G Ø 28 2, x 0 0/00 830.30/28G Ø 2, x 0 0/00 830.30/G Pins made of hardened and nickelplated steel. Clips made of thermoplastic material. Preinserted pins. 28 28
Din metallic rails > G TYPE RAILDIN Series > TYPE Ω RAILDIN Series Weight Kg/m Weight Kg/m xx1, Plain DIN rail 0, 20m 8.2 Slotted DIN rail (x,3 2) 0, 20m 8.211 x,x1 Plain DIN rail 0,1 0m 8.20 Slotted DIN rail (x,3 2) 0, 0m 8.21 > TYPE Ω RAILDIN Series > SUPPORT BRACKET RAILDIN Series 1 M 8 1.8 Weight Kg/m 0 3x,x1 3xx1, Plain DIN rail 0,3 0m 8.220 Slotted DIN rail (x,3 2) 0,31 0m 8.221 Plain DIN rail 0,8 20m 8.230 Slotted DIN rail (x,3 2) 0,1 20m 8.231 With M hole 0x8x1,8 0 8.200 DIN metallic rails Steel rail or mounting modular electrical equipment Steel, cold lamination Electrolytic zinc coating, followed by passivation and yellow colouring Thickness of zinc coating: 8 micron Length of the rail: 2m Non drilled rail with drilling points provided Drilled rail with slots 28 28