MMBD0 / MMBD0 / MMBD0 / MMBD04 / MMBD05 Small Signal Diodes Ordering Information SOT- Part Number Top Mark Package Packing Method MMBD0 4 SOT- L Tape and Reel MMBD0 5 SOT- L Tape and Reel MMBD0 6 SOT- L Tape and Reel MMBD04 7 SOT- L Tape and Reel MMBD05 8 SOT- L Tape and Reel (), () Absolute Maximum Ratings Connection Diagram 0 0 NC NC 0 04 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at T A = 5 C unless otherwise noted. 05 MMBD0 / MMBD0 / MMBD0 / MMBD04 / MMBD05 Small Signal Diodes Symbol Parameter Value Unit V RRM Maximum Repetitive Reverse Voltage 00 V I F(AV) Average Rectified Forward Current 00 ma I FSM Non-Repetitive Peak Forward Pulse Width =.0 second.0 Surge Current Pulse Width =.0 microsecond.0 A T STG Storage Temperature Range -55 to +50 C T J Operating Junction Temperature 50 C Notes:. These ratings are based on a maximum junction temperature of 50 C.. These are steady-state limits. ON Semiconductor should be consulted on applications involving pulsed or lowduty-cycle operations. 00Semiconductor Components Industries, LLC. October-07, Rev. Publication Order Number: MMBD0/D
Thermal Characteristics Values are at T A = 5 C unless otherwise noted. Symbol Parameter Value Unit P D Power Dissipation 50 mw Derate Above 5 C.8 mw/ C R θja Thermal Resistance, Junction-to-Ambient 57 C/W Electrical Characteristics Values are at T A = 5 C unless otherwise noted. Symbol Parameter Conditions Min. Max. Unit V R Breakdown Voltage I R = 00 μa 00 V V F I R Forward Voltage Reverse Current I F =.0 ma 550 600 mv I F = 0 ma 660 740 mv I F = 00 ma 80 90 mv I F = 00 ma 0.87.0 V I F = 00 ma. V V R = 0 V 5 na V R = 50 V 50 na V R = 50 V, T A = 50 C 00 μa C T Total Capacitance V R = 0, f =.0 MHz.0 pf t rr Reverse Recovery Time I F = I R = 0 ma, I RR =.0 ma, R L = 00 Ω 4.0 ns MMBD0 / MMBD0 / MMBD0 / MMBD04 / MMBD05 Small Signal Diodes
Typical Performance Characteristics Reverse Voltage, V R [V] 50 40 0 0 Ta= 5 C 0 5 0 0 0 50 00 Reverse Current, I R [ua] Figure. Reverse Voltage vs. Reverse Current BV @ I R =.0 to 00 μa Forward Voltage, V F [mv] Figure. Forward Voltage vs. Forward Current V F @ I F =.0 to 00 μa Forward Voltage, V F [V] 450 400 50 00 50.4..0 0.8 Ta= 5 C 5 0 0 0 50 00 Forward Current, I F [ua] Ta= 5 C Reverse Current, I R [na] 00 50 00 50 00 50 Ta= 5 C 0 0 0 0 50 70 00 Reverse Voltage, V R [V] Figure. Reverse Current vs. Reverse Voltage I R @ V R = 0 to 00 V Forward Voltage, V F [mv] 700 650 600 550 500 Ta= 5 C 450 0. 0. 0. 0.5 5 0 Forward Current, I F [ma] Figure 4. Forward Voltage vs. Forward Current V F @ I F = 0. to 0 ma Total Capacitance [pf]... Ta= 5 C MMBD0 / MMBD0 / MMBD0 / MMBD04 / MMBD05 Small Signal Diodes 0.6 0 0 0 50 00 00 00 500 Forward Current, I F [ma] Figure 5. Forward Voltage vs. Forward Current V F @ I F = 0 to 800 ma.0 0 4 6 8 0 4 Reverse Voltage [V] Figure 6. Total Capacitance vs. Reverse Voltage
Typical Performance Characteristics (Continued) Reverse Recovery Time [ns] Figure 7. Reverse Recovery Time vs. Reverse Current Power Dissipation, P D [mw] 4.0.5.0.5.0.5 Ta= 5 C.0 0 0 0 40 50 60 500 400 00 00 00 SOT- Pkg Reverse Current [ma] 0 0 50 00 50 00 Average Temperature, I O [ C] Figure 9. Power Derating Curve Current [ma] 400 00 00 00 IF(AV) - AVERAGE RECTIFIED CURRENT - ma 0 0 50 00 50 Ambient Temperature, T A [ C] Figure 8. Average Rectified Current (I F(AV) ) vs. Ambient Temperature (T A ) MMBD0 / MMBD0 / MMBD0 / MMBD04 / MMBD05 Small Signal Diodes 4
Physical Dimensions (0.9) C.0 MAX (0.9) GAGE PLANE 0. 0.08 0.0 MIN.9±0.0 0.95.90 (0.55).0 +0.0-0.5 0.60 0.7 0.0 A B 0.5 SEATING PLANE SEE DETAIL A 0.0 0.00.40 0.0 C 0.95.90 LAND PATTERN RECOMMENDATION.40±0.0 NOTES: UNLESS OTHERWISE SPECIFIED.0.00 A) REFERENCE JEDEC REGISTRATION TO-6, VARIATION AB, ISSUE H. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS ARE INCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR EXTRUSIONS. D) DIMENSIONING AND TOLERANCING PER ASME Y4.5M - 994. E) DRAWING FILE NAME: MA0DREV0 MMBD0 / MMBD0 / MMBD0 / MMBD04 / MMBD05 Small Signal Diodes SCALE: X Figure 0. -LEAD, SOT, JEDEC TO-6, LOW PROFILE 5
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor s product/patent coverage may be accessed at /site/pdf/patent Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. Typical parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 95 E. nd Pkwy, Aurora, Colorado 800 USA Phone: 0 675 75 or 800 44 860 Toll Free USA/Canada Fax: 0 675 76 or 800 44 867 Toll Free USA/Canada Email: orderlit@onsemi.com Semiconductor Components Industries, LLC N. American Technical Support: 800 8 9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 4 790 90 Japan Customer Focus Center Phone: 8 587 050 ON Semiconductor Website: Order Literature: http:///orderlit For additional information, please contact your local Sales Representative