www.osram-os.com Produktdatenblatt Version 1.1 Radial Sidelooker Silicon NPN Phototransistor Applications Electronic Equipment Highbay Industrial Industrial Automation (Machine controls, Light barriers, Vision controls) White Goods Features: Package: clear epoxy ESD: 2 kv acc. to ANSI/ESDA/JEDEC JS-1 (HBM, Class 2) Spectral range of sensitivity: (typ) 45... 1 nm High photosensitivity Same package as IR emitter IRL 81 A Ordering Information Type Photocurrent Ordering Code V CE = 5 V; λ = 95 nm; E e =.5 mw/cm² I PCE LPT 8A 25 µa Q68A7852 1 Version 1.3 218-6-2
Maximum Ratings T A = 25 C Parameter Symbol Values Operating temperature T op min. max. Storage temperature T stg min. max. -4 C C -4 C C Collector-emitter voltage V CE max. 3 V Collector current I C max. 5 ma Collector surge current τ µs I CS max. ma Emitter-collector voltage V EC max. 7 V Total power dissipation P tot max. mw ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-1 (HBM, Class 2) V ESD max. 2 kv 2 Version 1.3 218-6-2
Characteristics T A = 25 C Parameter Symbol Values Wavelength of max sensitivity λ S max typ. 88 nm Spectral range of sensitivity λ % typ. 45... 1 nm Chip dimensions L x W typ..55 x.55 mm x mm Radiant sensitive area A typ..11 mm² Half angle φ typ. 35 Photocurrent V CE = 5 V; Std. Light A; E v = lx Dark current V CE = 2 V; E = Rise time I C = 1 ma; V CC = 5 V; R L = 1 kω Fall time I C = 1 ma; V CC = 5 V; R L = 1 kω Collector-emitter saturation voltage 1) Threefold saturated Capacitance V CE = V; f = 1 MHz; E = I PCE typ. 32 µa I CE typ. max. 1 na 5 na t r typ. µs t f typ. µs V CEsat typ. 15 mv C CE typ. 7.5 pf Thermal resistance junction ambient real R thja max. 75 K / W 3 Version 1.3 218-6-2
Relative Spectral Sensitivity S rel = f (λ) S rel 2), 3) % OHF442 8 7 6 5 4 3 2 4 5 6 7 8 9 nm 1 λ Directional Characteristics 2), 3) S rel = f (φ) 4 OHF345 5 3 2 ϕ 1..8 6.6 7.4 8.2 9 1..8.6.4 2 4 6 8 12 4 Version 1.3 218-6-2
Photocurrent 2), 3) Dark Current 2), 3) I PCE = f (E e ) ; V CE = 5 V I CE = f (V CE ) ; E = ; Ι PCE 1 ma OHFD1422 I CEO 1 na OHF449-1 L K J H -2-1 -3-3 -2-1 mw/cm 2 E e -2 5 15 2 25 3 V 35 V CE Collector-Emitter Capacitance C CE = f (V CE ); f = 1 MHz; E = ; 2), 3) C CE 8 pf 7 OHF451 6 5 4 3 2 1-3 -2-1 1 V 2 V CE 5 Version 1.3 218-6-2
Dark Current 2) Photocurrent 2) I CE = f (T A ); V CE = 5 V; E = I PCE,rel = f (T A ); V CE = 5 V I CEO 4 na 3 OHF45 Ι PCE Ι PCE25 1.6 1.4 OHF1524 1.2 2 1. 1.8.6.4-1.2-2 -25 25 5 75 C T A -25 25 5 75 C T A Power Consumption P tot = f (T A ) Ι F 125 ma OHR1425 75 5 25 2 4 6 8 C T A 6 Version 1.3 218-6-2
Dimensional Drawing 4) 1.52 (.6) 2.54 (.) spacing Collector 16.51 (.65) 16. (.63) 1.52 (.6).64 (.25).46 (.18) 1.52 (.6) Plastic marking 5.84 (.23) 5.59 (.22) 1.29 (.51) 1.14 (.45) 2.34 (.92) 2.8 (.82) 4.57 (.18) 4.32 (.17) 2.54 (.) 2.3 (.8) 1.7 (.67) 1.45 (.57).64 (.25).46 (.18) R =.76 (.3) Approx. weight.2 g GEOY6391 Approximate Weight: Package marking: 157. mg Collector 7 Version 1.3 218-6-2
Recommended Solder Pad 4) 8 Version 1.3 218-6-2
TTW Soldering IEC-6176-1 TTW 3 C T 25 2 15 235 C - 26 C First wave Preheating 13 C 12 C C s max., max. contact time 5 s per wave T < 15 K Second wave Typical OHA4645 Continuous line: typical process Dotted line: process limits Cooling ca. 3.5 K/s typical ca. 2 K/s ca. 5 K/s 5 2 4 6 8 12 14 16 18 2 22 s 24 t 9 Version 1.3 218-6-2
Notes The evaluation of eye safety occurs according to the standard IEC 62471:26 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the LED specified in this data sheet falls into the class exempt group (exposure time s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. When looking at bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. For further application related informations please visit www.osram-os.com/appnotes Version 1.3 218-6-2
Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the OSRAM OS Webside. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Product safety devices/applications or medical devices/applications OSRAM OS components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices. In case Buyer or Customer supplied by Buyer considers using OSRAM OS components in product safety devices/applications or medical devices/applications, Buyer and/or Customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and Buyer and /or Customer will analyze and coordinate the customer-specific request between OSRAM OS and Buyer and/or Customer. 11 Version 1.3 218-6-2
Glossary 1) IPCEmin: I PCEmin is the min. photocurrent of the specified group. 2) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) Testing temperature: T A = 25 C 4) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±.1 and dimensions are specified in mm. 12 Version 1.3 218-6-2
Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-9355 Regensburg www.osram-os.com All Rights Reserved. 13 Version 1.3 218-6-2