ttachments Piping dapter M X 0.8, / 8, /, / 8, /, /, asy maintenance. Makes it possible to attach and detach equipment without removing piping. -0 Piping adapter To order piping adapter with bracket, the parts number as shown below. (xample) With L type bracket: 0L- With T type bracket: 0T- One with installed is special product. pplicable model 0-M M X 0.8 6-0 / 8-0 / - 0 / 8-0 / - 0 / 8 6-0 / 0 0-0 / 0-0 / 8 0-0 / 0-06 / 0 0-06 60-06 / / 60-0 6 0 9 9 7. 0 0, W000 000, R000, 000 0 00, R00, W00 000, M00, 00. 0, 0 00, R00, W00. 000, M00, 00.. 6.. 0 0 000, R000, W000 L000, M000, 000 0 0-06 000-06, R000-06, W000-06 L000-06, M000-06, 000-06 000, 00, 6000 0,, 60 000, R000, L000 6000, R6000, L6000 Note ) in part number indicates thread type. Use nothing for Rc(PT), N for NPT and for (P). T Type Interface: (T) M X 0.8, / 8, /, / 8, / Makes it easy to diverge air out with T type interface. Y-M Y-0, 0 Y-0, 0 Y-0, 0 Y-0, 0 Y-0, 0 Y T type interface ile S000, #9 S00, #9 S0, #9 S000, #9 S006, #9 S000, #9 Y aution on ssembling T type interface T type interface cannot be mounted at IN/OUT side of W or upward handle of R. When T type interface is used at IN side of lubricator, oil may have entered. Use check valve series KM. pplicable model Y-M M X 0.8 8 8 000, 0 Y- 0 / 8 Y- 0 / 0 9 9 00,, R Y- 0 / 8 00,, 9 Y- 0 00,, / Y- 0 / Y- 0 / 8 9 000, 0, 0 Y- 0 / 000-06, 0-06 Y- 0 / 8 0-06 Y- 0 / 8 000, 00, 6000 0. Y- 0 / 0,, 60 When T type interface with bracket is required, order as example below. (xample) With L bracket: Y L- With T bracket: Y T- Refer to a table of attachment on P..- for standard port size when applying to. in part number indicates thread. Use nothing for Rc(PT), N for NPT and for (P)..-7
.R.L. Unit Series ttachment Specifications Piping dapter () M x 0.8, /8,,, /, /, piping adapter allows installation/removal of the component without removing the piping and thus makes maintenance easier. enter of.r.l. body Piping adapter T-interface (T) M x 0.8, /8,,, / Using a T-interface facilitates the redirection of air flow. Note) 00-M 0-0 0-0 0-0 0-0 0-0 0-0 00-0 00-0 00-0 00-06 00-06 600-06 600-0 M x 0.8 /8 / / / / / 0. 6 0 8 8 6 pplicable model 0, W0, 0, R0, 0, R, W 0, M,, WM, W,, R, W 0, M,, WM, W 0 0, R0, W0 L0, M0, 0 WM0, W0 0-06, 0-06, R0-06, W0-06 L0-06, M0-06, 0-06 0,, 60, 0,, 60 0, R0, L0, 60, R60, L60 Notes) in model numbers indicates a thread type. No indication is necessary for Rc; however, indicate N for NPT, and for. Separate interfaces are required for modular unit. actory mounting of a piping adapter on the models is available as a special order. Octagon T-interface enter of.r.l. body aution in Mounting If a T-interface is used on the IN side of the lubricator, lubricant may be mixed. Use the series KM check valve to avoid such possibility. Y0-M Y- 0 Y- 0 Y- 0 Y- 0 Y0-0 Y0-0 Y0-0 Y0-0 Y0-0 Y0-0 M x 0.8 /8 /8 / 9 9 9 6 66 8 9 6 8 6 8 9 9 pplicable model 0, 0,,,, 0, 0 0 0-06, 0-06 0-06 0, 60, 0, 60 Notes) in model numbers indicates a thread type. No indication is necessary for Rc; however, indicate N for NPT, and for. Separate interfaces are required for modular unit. Refer to the attachment table on ront matter for standard port sizes when using with.
Modular ir omponents ttachments & ccessories T-Type Spacer Mx0.8, /8 / Y Y T-type spacer When T-type spacer with bracket is required, please order as follows. xample: L-type bracket:yoil-n0o T-type bracket:yoit-n0o Port size Y-M. Mx0. 8 (8) Y-N0 / 8.9 Y-N0 / (0) Y-N0 / 8. Y-N0 / () Y-N0 /. Y-N0 / 8 () Y-N0 /. Y-N0 / 8 () Y-N0 / 8.9 Y-N0 / () pplicable model. (8). (9). (9).9 ().9 ().8 ().7 (). (9). (). (9). (). (0.) N000 N0 N00 N N N00 N N N00 N N N000 N0 N0 N000-N06 N0-N06 N0-N06 N000 N0 N00 N N6000 N60 ross Spacer Mx0.8,/8 / ross spacer : -port size : No thread Y-M M x 0. 8 Port size pplicable model.9 () Y-N0 / 8. Y-N0 / (0) Y-N0 / 8. Y-N0 / (9) Y-N0 /.6 Y-N0 / 8 (60) Y-N0 / 8.8 Y-N0 / (7).6 (6). (0).69 ().89 (8). (6). ().87 ().0 (8). (6). (0). (). (0).89 (8). (). (6) N000 N00 N0 N00 N0 N N N0 N00 N N N00 N0 N N N0 N000 N00 N0 N0 N00 N000-N06 N00-N06 N0-N06 N0-N06 N00-N06 Return to Menu 87
ttachments & ccessories Modular ir omponents Spacer Y Y0 pplicable model Y 0. (8) N000 ~ N0 Y. 9 (0) N00 ~ N0 Y. () N00 ~ N0 N00 ~ N0 Y 0. () N000 ~ N00 Inch (mm) Y 0. () N000-N06 ~ N00-N06 Y 60.9 () N000, N00, N6000 N0, N, N60 Spacer With L-type racket Spacer with L type bracket L type bracket L-type racket 0L L L 0L 0L 0L Spacer with L- type racket Y0L YL YL Y0L Y0L Y60L R L pplicable model.79 ().9 ().8 (). (0). (0).97.7 ().9 ().6 (6).87 ().87 ().9 ().8 (.). (.). (9). (9).7 (). (). ().6 ().6 ().6 ().6 (). ().8 (). ().97.97. (70). (). ().9 (0) Inch (mm)..09.06 (8) (.) (7) N000~N0.9.. (0) (.) () N00~N0...77 N00~N0 () (.0) () N00~N0..8.97 () (.) N000~N00..8.97 () (.) N000-N06~N00-N06.9..6 N000 N00 N6000 () (6) (6.) N0 N N60 88 Return to Menu
Modular ir omponents ttachments & ccessories Spacer with T-type racket Spacer with T-type racket T-type racket T-type racket 0T T T 0T 0T 0T Spacer with T-type racket Y0T YT YT Y0T Y0T Y60T H R L pplicable model.79 ().9 ().8 (). (0). (0).97.7 ().9 ().6 (6).87 ().87 ().9 ().8 (.). (.). (9). (9).7 (). (). ().6 ().6 ().6 ().6 (). ().8 (). ().97.97. (70). (). ().9 (0) Inch (mm)...09.06 (8) (0) (.) (7) N000~N0.9.89.. (0) (8) (.) () N00~N0....77 N00~N0 () (70) (.0) () N00~N0...8.97 () () (.) N000~N00...8.97 () () (.) N000-N06~N00-N06.9.9..6 N000 N00 N6000 () (00) (6) (6.) N0 N N60 Return to Menu 89
Series Spacers and rackets ccessories Spacer (X) enter of.r.l. body Y0 Y00 RLS X X X-X Y00 Y0 Y0 Y00 Y00 Y600 6 6 7. 7. 8. 6 8 9 6 70 86 pplicable model 0, 0, 0, 0 0-06 0,, 60 0,, 60 Seal Spacer width Replacement parts escription Seal Material Y00 Note ) HNR Y0 Note ) Y00P-060S Y0P-060S Note ) Y-00 comes with O-rings. Note ) NR seal is used for Y00 spacer because of no direct contact with fluid. Y0 Y0P-060S Part no. Y00 Y00P-060S Y00 Y00P-060S Y600 Y600P-060S Spacer with racket (Z) ø enter of.r.l. body (Y00T, Y0T only) RLS (Y00T, Y0T only) Seal X X X-X Y0T Y00T H K J Spacer width Y00T Y0T Y0T Y00T Y00T Y600T 6 6 escription Seal 8 Replacement parts 6 67. 9 8 8 60 Material Y00T Note ) HNR 0. 68 8. 86 0 0 0 7 Y0T Note ) Y00P-060S 6.8 8 8.. 7 9 9 Y0P-060S Note ) Y-00T comes with O-rings. Note ) NR seal is used for Y00T spacer because of no direct contact with fluid. ø.. 7 9 9 H 9 6 7 J.8..6 6. Y0T Y0P-060S Part no. K 0 0 70 pplicable model 0, 0 0-06 0,, 60, 0,, 60 Y00T Y00P-060S Y00T Y00P-060S Y600T Y600P-060S 8
Series Mounting Position for Spacer with racket racket T-interface: T Pressure switch: S heck valve: K -port valve for residual pressure: V SUP. IN OUT IN OUT racket L 0 0 0-06 0 60 9 ttachment ttachment 0 0 0-06 0 60 ttachment 0 0-06 ttachment 0 0 0-06 0 60 ttachment 0 0-06 ttachment 0 0-06 K S K S T V KS KT KV KST 0 8 8 0 9 L KSV KTV KSTV ST SV STV TV L L L 0 9 0 0 0 0 T 8 S S S V KS KV KSV SV V SV 0 TV 0 T V SV TV 0 V SV 0 0 0 : imensions from the end of the IN side to the center of the mounting hole for the first bracket. : Mounting hole pitch between the first and the second bracket. : Mounting hole pitch between the second and the third bracket. L: Mounting hole pitch between the third and the fourth bracket. Refer to dimensions pages for dimension from the center of the piping and the mounting hole.
ttachments ross Interface M X 0.8, /8, /, / 8, / Make it possible to diverge piping in all directions. Note) IN/OUT port is not machined for thread piping. ross interface ross interface Y-M Y-0, 0 Y-0, 0 Y-0, 0 Y-0, 0 ile S000, #0 S00, #0 S00, #0 S000, #0 S006, #0 Residual Pressure xhaust Port Valve: (V) Residual pressure exhaust port valve makes it easier to exhaust pressure. Residual pressure exhaust port valve : -Rc(PT) : Without thread pplicable model Y-M M 6 000, 00, 0 Y- 0 8 00, 0, Y- 0 0 0 0, 0 Y- 0 00,, 8 Y- 0 9 8 8 00, 0,, 0 Y- 0 000, 00, 0 Y- 0 60 8 6 8 0, 00 Y- 0 8 7 6 0 Y- 0 00-06 Note ) in parts number indicates thread. Use nothing for Rc(PT), N for NPT and for (P). 6 aution on ssembling 000-06, 00-06 0-06, 0-06 When mounting directly onto the IN side of lubricator, use check valve series KM between the interface and lubricator. Installation to will be available as a special product. Please consult SM. Specifications ffective area (mm ) IN to OUT OUT to XH VHS00 VHS00 8 0 6 8 6 9 VHS000 8 8 9 Note) Use air filter on the IN side to protect operation. How to Order.- VHS 00 0 Residual pressure exhaust port valve 0 8 ody size 0 0 8 8 0 0 8 Thread N Rc(PT) NPT (P) Residual pressure exhaust port valve ile VHS00 VHS00 VHS000 IN/OUT XH VHS00 8, 8 0 6 6 8 VHS00, 8 8 8 () VHS000, 8, 8 70 8 6 Note ) NOT applicable to 0 0-06. aution on ssembling Pressure switch and T type interface can not be mounted to OUT side of residual pressure exhaust port valve. S00, # S0, # S000, #
Series heck Valve (K) Rc/8,, check valve with intermediate air release port can be easily installed to prevent a back flow of lubricant when redirecting the air flow and releasing the air on the outlet side of the regulator. heck valve ypass port size for redirecting air flow Specifications KM00 KM00 KM000 KM ffective area (mm ) 8 e sure to use above check valves when redirecting the air flow on the inlet side of the lubricator. Threads for IN and OUT ports are not machined. How to Order 00 0 IN KM00 KM00 KM000 ypass port sizes /8, /8,, 0 0 8 8 70 8 OUT pplicable model,,, 0, 0 Note) Note) Not applicable to 0-06. Refer to the attachment table on page or for standard bypass port sizes applicable to. heck valve ody size 0 ypass port size for redirecting air flow Symbol 0 0 0 Port size /8 ody size 0 Thread type Nil N Rc NPT
ttachments & ccessories Modular ir omponents Piping daptor Mx0.8, /8 / / llows for ease of installation and maintenance. Piping daptor -0 *When piping adaptor with bracket is required, please order as follows. xample: L-type bracket: L-N0 T-type bracket: T-N0 Inch (mm) Port size pplicable model.6..69 N0 0 NW000 0-M Mx0. 8 (6) () (7.) N000 NR000 N000 -N0 / 8 N 0.9.87.87 -N0 / N00 NR00 NW00 () () () -N0 / 8 N000 NM00 N00 -N0 /.0.. N 0 N 0 -N0 / 8 (6) (9) (.) N00 NR00 NW00... -N0 / N000 NM00 N00 (0) (9) (.) 0-N0 / 0-N0 / 8 0-N0 / 0-N06 / 0-N06 / 60-N06 / 60-N0. ().97. (6). (0).8 ().8 ().7 (). ().66 (.).66 (.).8 (6.).7 (.) N000 N000 NR000 NW000 NL000 NM000 N000 N000-N06 N00-N06 N00-N06 N000 N00 N6000 N0 N N60 N000 NR000 NL000 N6000 NR6000 NL6000 The check valve spacer is designed to prevent back flow of lubricated air from a lubricator into a non-lubricated line. heck Valve heck valve NKM00 How To Order NKM 00 N 0 IN OUT heck Valve ody size /8 0 / Port thread Nil Rc(PT) (P) N NPT 0 /8 0 0 NKM00 /8 / NKM00 /8 / NKM000 / 8 Port size pplicable model. (0).09 (). (70). (0).89 (8). ().0 (8). ().6 (). (). ().7 (8). (). ().9 () N00 N0 N00 N0 N00 N0 N000 N00 8 Return to Menu
Series -Port Valve for Residual Pressure Release (V) With the use of a -port valve for residual pressure release, pressure left in the line can be easily exhausted. -port valve for residual pressure release øi -ø0 H JIS symbol () Lockable at the time of exhaust Specifications (P) (R) VHS VHS ffective area (mm ) ( )ffective rea mm (v) IN,OUT XH. IN to OUT OUT to XH. /8 0 (0.) (0.60) /8 (0.) 6 (0.87) 6 (0.87) (0.) (.68) 9 (.) VHS0 VHS0-06 / / / 7 (.6) 8 (.06) (.) 77 (.7) 6 (.) 0 (.7) () 9 (.66) VHS0 / 8 (.) 0 (.7) / (6.78) (.87) Note) Use an air filter on the IN side for operating protection. IN SUP XH. OUT -port valve for residual pressure release Symbol 0 0 VHS ody size pplicable model, 0 0, 60 Note) Note) When the valve is mounted on 60, the flow rate may decrease depending upon the mounting position. How to Order 0 RZ VHS VHS VHS0 VHS0-06 VHS0 9 78 07 0 9 9 0 70 90 6 6 67 78 6 8 6 0 H 8 6 I 6 69 8 aution. onsult SM when a pressure switch and T type spacer are installed on the outlet of pressure release valve. If a stop valve or a silencer is connected to the exhaust port of VHS/, the effective sectional area should be larger than the figure indicated in the following table, to prevent malfunction caused by back pressure. (This is not applicable to VHS0 and VHS0) VHS VHS ffective area (mm ) 7 Symbol 0 0 0 0 06 0 Thread type Nil Rc N NPT /8 / / V V ody size 0 V V V V V V 0 V V Optional specifications ode escription R low direction: Right to left Z Note ) Name plate in imperial units (PSI, ) Note ) This product is for overseas use only according to the new Measurement Law. (The SI unit type is provided for use in Japan.)
ttachments Pressure Switch with Piping dapter JIS symbol V Specifications luid Proof pressure Max. operating pressure Set pressure range (off) ifferential mbient and fluid temperature Switch haracteristics ontact point structure Max. contact point capacity Voltage, Max. operating current How to Order IS000 Pressure switch with piping adapter N ody size or 00 or 00, 00 or 000-0 to 0 0 YL Thread Rc(PT) NPT (P) ir.0mpa 0.7MPa 0. to 0.MPa 0.08MPa to 60 (No condensation) a V /W V, V, 8V, 00V, V to V : 0m, 8V : 0m, 00V : m ttachment Y YL YT Piping adapter port size 0 0 0 0 06 () IS000-0Y / 8 IS000-0Y / IS000-0Y / 8 IS000-0Y / IS000-0Y / 8 IS000-0Y / IS000-0Y / IS000-0Y / 8 IS000-0Y / IS000-06Y / Options X Length of lead wire: m X Setting pressure range: 0. to 0.6MPa X0 Reverse mounting (Left side mounting style) Without attachment With attachment With attachment and L type bracket With attachment and T type bracket / 8 / / 8 / / 8 7 6 8. 6 6 6. 0 6 7. 87 66 7. pplicable model 00, 0,, 0 W00 00,, 00, 0,, 0 W00, W0 000, 00, 0 0, 00 W000, W00 () 0 87 66 7. Note) in the part number indicate a connecting thread. Use nothing for Rc(PT), N for NPT and for (P). Note) an NOT be mounted on "0 0-06" and "W0 0-06". With retainer, O ring and bolt. onsult SM when mounting the pressure switch on "0 0-06" and "W0 0-06". or more information, refer to p..0-0. U R IR VX W MR WM W ITV V V VY L ttachments for IS000 Pressure switch applicable model No. IS000- to IS000- to IS000-0 to 06 Y type standard Y Y Y0 YL type with L type bracket YL YL Y0L YT type with T type bracket YT YT Y0T.-8
ttachments Pressure Switch: (S) ompact pressure switch can be mounted easily. Makes it easier to detect pressure in lines. Pressure switch Specifications luid Proof pressure Max. operating pressure Set pressure range (off) ifferential mbient and fluid temperature Switch haracteristics ontact point structure Max. contact point capacity Voltage, Max. operating current or more information, refer to SM Pressure switch catalog. (atalog No.8) How to Order IS000M YT JIS symbol ir.0mpa 0.7MPa 0. to 0.MPa 0.08MPa to 60 (No condensation) a V /W V, V, 8V, 00V, V to V : 0m, 8V : 0m, 00V : m IS000M-Y IS000M-Y IS000M-Y IS000M-Y IS000M-6Y 7. 6.6 8 0 8 6.9 9 88.7 67.6 9 68 00 aution on ssembling pplicable model 00,, 00,, 00,, 000, 0, 0 000-06, 0-06 0-06 000, 00, 6000 0,, 60 ttachment for pressure switch can be installed at the IN/OUT side of, R, L, M and. Mounting at the IN/OUT side of W and upward handle ofr is not possible. V U R IR VX W MR WM W ITV V V VY L Pressure switch 6 ody size or 00 or 00, 00 or 000-0 to 0 or 000-06 or 000, 6000 ttachment Y YL YT Options X X Without attachment With attachment With attachment and L type bracket With attachment and T type bracket Length of lead wire: m Set pressure range: 0. to 0.6MPa ttachments for IS000M Pressure switch applicable model No. IS000M- IS000M- IS000M- IS000M- IS000M-6 Y type standard YM YM Y0M Y0M Y60M YL type with L type bracket YLM YLM Y0LM Y0LM Y60LM YT type with T type bracket YTM YTM Y0TM Y0TM Y60TM.-