GeoLogic Mapping North Hollywood HS

Similar documents
GeoLogic Mapping North Hollywood HS

Plate Tectonics. entirely rock both and rock

A) B) C) D) 4. Which diagram below best represents the pattern of magnetic orientation in the seafloor on the west (left) side of the ocean ridge?

Strike-Slip Faults. ! Fault motion is parallel to the strike of the fault.

TAKE HOME EXAM 8R - Geology

10. Paleomagnetism and Polar Wandering Curves.

Forces That Shape Earth. How do continents move? What forces can change rocks? How does plate motion affect the rock cycle?

Continental Drift. & Plate Tectonics

Theory of Continental Drift

Plates & Boundaries The earth's continents are constantly moving due to the motions of the tectonic plates.

Shape Earth. Plate Boundaries. Building. Building

4 Deforming the Earth s Crust

Theory of Plate Tectonics

Answers: Internal Processes and Structures (Isostasy)

ANOTHER MEXICAN EARTHQUAKE! Magnitude 7.1, Tuesday Sept. 19, 2017

Chapter. Graphics by Tasa Graphic Arts. Inc.

6. In the diagram below, letters A and B represent locations near the edge of a continent.

Chapter 7 Plate Tectonics. Plate tectonics accounts for important features of Earth s surface and major geologic events.

I. Earth s Layers a. Crust: Earth s outside layer. Made of mostly rock. i. Continental: er; made of mostly granite, forms the continents and shallow

L wave Lahar Lava Magma

YORK CASTLE HIGH SCHOOL CHRISTMAS TERM EXAMINATIONS GEOGRAPHY Duration 1 1 /2 HRS.

A physical feature of the Earth s surface

Plate Tectonics. Theory of Plate Tectonics. What is Plate Tectonics. Plate Tectonics Plate Boundaries Causes of Plate Tectonics

Distribution of Continents Mid-ocean Ridges Trenches. Deformation Metamorphism Volcanism Earthquakes

KEY CHAPTER 12 TAKE-HOME QUIZ INTERNAL STRUCTURES AND PROCESSES Score Part B = / 55 PART B

1.4 Notes: Plates Converge or Scrape Past Each Other Think About Tectonic Plates Push Together at Convergent Boundaries

Dynamic Crust Practice

Section 10.1 The Nature of Volcanic Eruptions This section discusses volcanic eruptions, types of volcanoes, and other volcanic landforms.

Convergent plate boundaries. Objective to be able to explain the formation and key features of these zones.

Dynamic Earth A B1. Which type of plate boundary is located at the Jordan Fault? (1) divergent (3) convergent (2) subduction (4) transform

Plate Tectonics Unit II: Plate Boundaries (3.5 pts)

Full file at

Full file at

PLATE TECTONICS REVIEW GAME!!!!

Unit 1: Earth as a System. Section 1: Plate Tectonics and the Rock Cycle

Earthquakes. Earthquakes are caused by a sudden release of energy

Plate Tectonics. Continental Drift Sea Floor Spreading Plate Boundaries

Name Date Class. Directions: Use the diagram below to answer question Florida Progress Monitoring and Benchmark Assessments

Directed Reading. Section: Volcanoes and Plate Tectonics

Earth, the Lively* Planet. * not counting the life on the planet!

water erosion lithosphere Describe the process of erosion and deposition. chemical weathering Dissolving limestone is an example of.

Earth s Dynamic Surface

Name Date Class. Plate Tectonics

Geologic Structures. Changes in the shape and/or orientation of rocks in response to applied stress

Earth Science, (Tarbuck/Lutgens) Chapter 10: Mountain Building

4 Deforming the Earth s Crust

Origin and Evolution of the Ocean Floor

Name: Answer Key Date: Period:

Plate Tectonics. Structure of the Earth

Geology 300, Physical Geology Spring 2019 Quiz Ch 19, Plate Tectonics Name

Topic 12: Dynamic Earth Pracatice

Layers of the Earth Date: SWABT: Identify and describe the layers of the Earth and their characteristics

Crustal Boundaries. As they move across the asthenosphere and form plate boundaries they interact in various ways. Convergent Transform Divergent

Earth s Geological Cycle

SUBSURFACE CHANGES TO EARTH. Ms. Winkle

Plate Tectonics. I. The Discovery of Plate Tectonics II. A Mosaic of Plates III. Types of Plate Boundaries IV. How Plates Move

Unit Study Guide: Earth s Changing Surface

UNIT 3 GEOLOGY VOCABULARY FLASHCARDS THESE KEY VOCABULARY WORDS AND PHRASES APPEAR ON THE UNIT 3 CBA

Movement of the Earth s Crust: Formation of: Mountain s Plateau's and Dome s

3. PLATE TECTONICS LAST NAME (ALL IN CAPS): FIRST NAME: PLATES

Chapter 10: Volcanoes and Other Igneous Activity Section 1: The Nature of Volcanic Eruptions I. Factors Affecting Eruptions Group # Main Idea:

Directed Reading. Section: Volcanoes and Plate Tectonics

Plate Tectonics Notes

Layer Composition Thickness State of Matter

sonar seismic wave basalt granite

Plate Boundaries. Presented by Kesler Science

22.4 Plate Tectonics. Africa

How to Build a Mountain and other Geologic Structures. But first a short review

Earth s Changing Surface

Chapter Review USING KEY TERMS. asthenosphere uplift continental drift. known as. tectonic plates move. object. UNDERSTANDING KEY IDEAS

Geosphere Final Exam Study Guide

Continental Drift to Plate Tectonics: From Hypothesis to Theory

8 th Grade Science Plate Tectonics and Topography Review

12. The diagram below shows the collision of an oceanic plate and a continental plate.

Chapter 16. Mountain Building. Mountain Building. Mountains and Plate Tectonics. what s the connection?

Lab 2: Plate tectonics

Plate Tectonic Theory

Plate Tectonics - Demonstration

Marine Science and Oceanography

Plate Tectonics Tutoiral. Questions. Teacher: Mrs. Zimmerman. Plate Tectonics and Mountains Practice Test

Physical Geology, 15/e

Copyright McGraw-Hill Education. All rights reserved. No reproduction or distribution without the prior written consent of McGraw-Hill Education

Section 1: Continental Drift

Chapter: Earthquakes and Volcanoes

STUDY GUIDE FOR MID-TERM EXAM KEY. Color, luster, cleavage, fracture, hardness, taste, smell, fluorescence, radioactivity, magnetism

Earth s Interior StudyGuide

Plate Tectonics. How do the plates move?

Earth Boot Camp. 3.7B: Investigate rapid changes in Earth s surface such as volcanic eruptions, earthquakes and landslides.

Earthquakes & Volcanoes

Potential short answer questions: What is Pangea? Describe at least 4 pieces of evidence that led Wegener to suggest the theory of Continental Drift.

Before Plate Tectonics: Theory of Continental Drift

Assessment Schedule 2015 Earth and Space Science: Demonstrate understanding of the causes of extreme Earth events in New Zealand (91191)

Outcome C&D Study Guide

Plate Tectonics IDEA THAT EARTH S SURFACE IS BROKEN INTO PLATES THAT MOVE AROUND. Fault = fracture in the crust where the movement has occurred

Earth Systems Science Chapter 7. Earth Systems Science Chapter 7 11/11/2010. Seismology: study of earthquakes and related phenomena

General Oceanography Geology 105 Expedition 8 Plate Boundaries Beneath the Sea Complete by Thursday at 11:00 PM

Chapter 7: Volcanoes 8/18/2014. Section 1 (Volcanoes and Plate Tectonics) 8 th Grade. Ring of Fire

Crustal Activity. Plate Tectonics - Plates - Lithosphere - Asthenosphere - Earth s surface consists of a major plates and some minor ones

Plate Boundaries & Resulting Landforms

Directed Reading. Section: How Mountains Form MOUNTAIN RANGES AND SYSTEMS. Skills Worksheet

Transcription:

GeoLogic Mapping North Hollywood HS Names: Team Name and Number: Score: /82

Instructions: Partial credit exists! No guessing penalties! Life is good. 1. Describe a sinistral fault and make a simple drawing (2) A left-lateral strike slip fault, when facing across the fault the block opposite you moves left(1) 2. Answer the following about the map below a. What type of map is this? (1) Topographic b. What is the contour interval? (1) 40ft c. What does the color green signify in the map? (1) Dense vegetative cover or forest d. Draw an elevation profile for the Merced River along its course (3)

1pt for showing continuous decrease in elevation towards the valley 1pt for 2 clear drops at the falls 1pt for a noticeably greater gradient below Vernal Falls 3. Name the general type of map pictured above and describe its similarities to a topographic map. (2) Azimuthal (1) and the parallels circling the pole here are similar to contour lines since this is a flattened projecting of a hemisphere (1) 4. Explain strike and dip. How are they expressed numerically and graphically? (8) Strike is the horizontal line representing the intersection of a fault or strata with a horizontal plane (1) It is expressed as either deviation from true north as in N25E (25 degrees east of north) (1) or as true bearing given in degrees clockwise from true north (so the example before would be 025) (1) Dip is the steepest angle of inclination of the fault or strata away from the surface expressed in degrees (1) It is expressed as degrees of the angle formed between

the strata and the surface (1) and then the direction that it dips to clarify which side of the strike it dips away towards (1) Strike and dip are represented as a long horizontal line along the strike with a short line in the direction of the dip with a number in degrees next to it which is the angle of the dip (2) 5. Answer the following about tsunamis a. How tall was the largest tsunami ever recorded to the nearest 100ft? (1) 1700 b. How are the largest tsunamis formed? (2) Submarine landslides cause large displacement of water and huge waves over more limited areas c. List 3 ways in which tsunamis may form (3) Landslides, thrust faulting and seismic activity, volcanic eruptions, glacial calving, meteors, rapid barometric pressure changes 6. Describe the eruptions that form the following features (2pt each) a. Yellowstone caldera Supervolcanic eruption (1) which is the largest class of volcanic eruption releasing tons of material in a highly explosive eruption (1) b. Columbia flood basalts Fissure eruption (1) which is the largest class of volcanic eruption by volume of ejecta. Releases large amount of more fluid basaltic magma along large fountains or fissure zones (1) c. Maars (no, that isn t a typo) Phreatic eruptions (1) of steam. These blast off in explosions without magma forming broad shallow maar craters (1) 7. Match each of the following descriptions to their type of mass wasting (1pt each) a. Gradual movement of primarily surface soil as it expands and contracts Creep b. Movement of a block of earth down a curved surface known as a scarp Slump c. Debris flow from a volcanic area and volcanic activity Lahar d. A type of flow in which rocks and sediment flow like a fluid because they compress air beneath them Rock avalanche

8. Which of the following words does not belong? (1) a. Anticline b. Cuesta c. Antiform d. Dome B. Cuesta 9. The image is of the Richat Structure ( eye of the sahara ) which is a geologic feature 25 miles across visible from space. How could you determine whether the feature is a synform or antiform? (3) By determining the age of different strata (1) If older rocks are towards the center, it s an antiform whereas if the younger rocks are towards the center, it s a synform (2) 10. The image above displays what unique type of rock formation? How is this formed? (4) This is columnar basalt (1) which forms from magma (1) which cools very slowly (1) causing the rock to contract into the generally hexagonal columns depicted in the waterfall (1) 11. You take a piece of paper and fold it in half. What type of folding does this represent? (1) Recumbent is what this is looking for, but chevron is also acceptable

12. Matthew decides to finally quit smoking. He flicks his last cigarette into the bushes and starts on his new life as a vaper. A forest fire burns away all vegetative cover in the nearby hills. Answer the following questions. a. Explain how this will affect the shape of the surrounding hills and drainage ways (2) Drainages will become more sharply defined as flowing water downcuts more easily without vegetation to hold it back. Rills and gullies and smaller streamcourses will be able to erode sharper channels. (2) b. What is the largest risk to nearby homes after the fire? (1) Debris flows (accept mudslides) c. Millions of years later, how will the grain size in sedimentary strata from this period compare to other years? Use the terms stream load and stream competence in your answer (5) Grain size will be smaller since many finer sediments that had been locked up by vegetation will now be available for erosion (2). This will increase stream load and capacity (1), but the flow velocity is not significantly increased so the competence remains roughly constant (1) meaning that this does not make the stream able to transport larger sediments nor transport them better than before (1) 13. What is a shield? Hint: Strategic Homeland Intervention, Enforcement and Logistics Division is not the correct answer (2) An exposed region of stable (1) continental craton or crust (1) 14. Answer the following about caves a. Caves primarily form in what class of rock? (1) Carbonates; half credit if they name a carbonate rock such as limestone, dolostone, or marble b. What is the most common formative agent for caves? (1) Water c. Describe speleogens and speleothems (2) Speleogens are from deposits of previously dissolved minerals (1) Speleothems are structures formed from erosion of minerals in caves (1) 15. What is a MEGATHRUST earthquake? (3) The largest class of earthquake (1). Formed from the forced subduction of one plate under another (2).

16. Answer the following of the image above a. What type of geologic feature is displayed? (1) Mid-ocean ridge b. What is the name of this specific geologic feature? (1) Mid-Atlantic ridge c. What are the horizontal cracks running across the image and why do they form (2) Fracture zones (1) which help offset bends in the course of the midocean ridge (1) d. Which scientist hypothesized the function of these features? (1) Harry Hess 17. Answer the following about the image above a. How is the magma formed? (2)

Flux melting (1) since the moisture released from the subducting plate goes into the asthenosphere and lowers its melting point causing magma genesis (1) b. What is the accretionary wedge and how is it formed? (2) The accretionary wedge is an accumulation of sediments (1) which have been scraped off the subducting plate and accreted onto the overriding plate (1) c. The crust can often be very thin in the backarc (not depicted in the image). Why is this? (4) The subducting plate causes a minor convecting current loop by pulling the asthenosphere surrounding it down with it. This means that more asthenosphere must rise up to replace it which occurs in the backarc area. The upward push of the rising asthenosphere pushes up and outwards in both directions causing crust thinning and sometimes an actual spreading center. (4) d. How does this tectonic setting primarily cause tsunamis? (2) The overriding plate is locked with the subducting plate. When an earthquake occurs, the overriding plate snaps forward in relation to the subducting plate which acts like a wedge displacing large amount of water causing tsunamis (2) e. In which 2 ways does this tectonic setting primarily cause earthquakes? (4) Megathrust earthquakes (1) form from the thrusting of the overriding plate over the subducting plate (1) Deep focus earthquakes (1) form from the mineral structural changes in the rock that occur in the subducting plate as it sinks into the mantle (1) f. Name all 3 locations in North America where this tectonic setting may be found (3) Cascadia subduction zone (along washington and the juan de fuca plate) Aleutian trench Puerto rico trench along the eastern caribbean island arc