Separate components and accessories : electrical blocks References Contact blocks with screw clamp terminal connections (1) Description Type of contact Sold in Unit Weight lots of reference ZBE-101 N/O N/C Standard single 1 5 ZBE-101 0.011 contact block 1 5 ZBE-10 0.011 ZBE-10 Standard double 5 ZBE-03 0.00 contact block 5 ZBE-04 0.00 ZBE-03 1 1 5 ZBE-05 0.00 ZBE-04 Special contacts 1 5 ZBE-1016 0.01 (for low power switching and dust protected) cannot be fitted with supplementary contact blocks 1 5 ZBE-106 0.01 Body/fixing collar ZB5-AZ009 For use Sold in Unit Weight with lots of reference Electrical blocks (contact or light) 10 ZB5-AZ009 0.006 Clip-on legend holders for electrical blocks with screw clamp terminal connections ZBZ-001 Identification of 10 ZBZ-001 0.001 an XB5-A control or signalling unit Sheet of 50 blank legends Legend holder ZBZ-001 10 ZBY-001 0.03 SIS labelling software (for legends ZBY-001) Legend design 1 XBY-1EN 0.060 (English version) Legend design 1 XBY-1FR 0.060 (French version) XBY-1ii /40 Te Legend design 1 XBY-1GE 0.060 (German version) (1) The contact blocks enable variable composition of body sub-assemblies and can be stacked to 3 rows, either : 3 rows of 3 single contacts or 1 row of 3 double contacts + 1 row of 3 single contacts (double contact blocks occupy rows).
Separate components and accessories : electrical blocks ZBV-Bi Light blocks with screw clamp terminal connections Description Supply Colour of Sold in Unit Weight voltage light source lots of reference V Integral LED z 4 White 5 ZBV-B1 0.017 Green 5 ZBV-B3 0.017 Red 5 ZBV-B4 0.017 Yellow 5 ZBV-B5 0.017 Blue 5 ZBV-B6 0.017 c 110...10 White 5 ZBV-G1 0.017 Green 5 ZBV-G3 0.017 Red 5 ZBV-G4 0.017 Yellow 5 ZBV-G5 0.017 Blue 5 ZBV-G6 0.017 c 30...40 White 5 ZBV-M1 0.017 Green 5 ZBV-M3 0.017 Red 5 ZBV-M4 0.017 Yellow 5 ZBV-M5 0.017 Blue 5 ZBV-M6 0.017 Direct 50 5 ZBV-6 0.016 supply for BA 9s.4 W max. bulb Not included (1) Body/fixing collar For use Sold in Unit Weight with lots of reference Electrical block (contact or light) 10 ZB5-AZ009 0.006 ZB5-AZ009 Clip-on legend holders for electrical blocks with screw clamp terminal connections Identification of 10 ZBZ-001 0.001 an XB5-A control or signalling unit ZBZ-001 Sheet of 50 blank legends Legend holder ZBZ-001 10 ZBY-001 0.03 SIS labelling software (for legends ZBY-001) Legend design 1 XBY-1EN 0.060 (English version) XBY-1ii Legend design 1 XBY-1FR 0.060 (French version) Legend design 1 XBY-1GE 0.060 (German version) (1) Bulb to be ordered separately : see page /5. Te /41
Separate components and accessories : electrical blocks Contact blocks for plug-in connector Description Type of contact Sold in Unit Weight lots of reference N/C N/O Standard contacts 1 5 ZBE-1014 0.009 ZBE-1014 1 5 ZBE-104 0.009 Light blocks for plug-in connector ZBE-104 Description Supply Colour of Sold in Unit Weight voltage light source lots of reference V Integral LED z 4 White 5 ZBV-B14 0.016 Green 5 ZBV-B34 0.016 Red 5 ZBV-B44 0.016 Yellow 5 ZBV-B54 0.016 Blue 5 ZBV-B64 0.016 c 110...10 White 5 ZBV-G14 0.016 ZBV-Bi4 Green 5 ZBV-G34 0.016 Red 5 ZBV-G44 0.016 Yellow 5 ZBV-G54 0.016 Blue 5 ZBV-G64 0.016 c 30 40 White 5 ZBV-M14 0.016 Green 5 ZBV-M34 0.016 Red 5 ZBV-M44 0.016 Yellow 5 ZBV-M54 0.016 APE-1C50 Blue 5 ZBV-M64 0.016 Connecting cables and connector Description Number of Wire Length Sold in Unit Weight connectors c.s.a. lots of reference mm mm APE-1PAD1 Cables with 1 0,75 500 8 APE-1C150 0,10 connector -pin, 5.08 mm 0,75 500 8 APE-1C50 0,180 Self-stripping 16 APE-1PAD1 0,080 connector Body/fixing collar ZB5-AZ009 For use Sold in Unit Weight with lots of reference Electrical block (contact or light) 10 ZB5-AZ009 0.006 /4 Te
Separate components and accessories : electrical blocks Contact block for printed circuit board connection (1) Description Type of contact Sold in Unit Weight lots of reference ZBE-701 N/O N/C Standard contacts 1 10 ZBE-701 0.00 1 10 ZBE-70 0.00 ZBE-70 Special contacts 1 10 ZBE-7016 0.003 (for low power switching and dust protected) 1 10 ZBE-706 0.003 ZBV-Bi7 Light blocks for printed circuit board connection (1) Description Supply Colour Sold in Unit Weight voltage of LED lots of reference V Integral LED z 4 White 5 ZBV-B17 0.004 Green 5 ZBV-B37 0.004 (for heads with integral LED, see page /31) Red 5 ZBV-B47 0.004 Yellow 5 ZBV-B57 0.004 Blue 5 ZBV-B67 0.004 ZB5-AZ009 Body/fixing collar For use Sold in Unit Weight with lots of reference Electrical block (contact or light) 10 ZB5-AZ009 0.006 ZB5-AZ079 ZBZ-010 Accessories specifically for printed circuit board mounting Description Application Sold in Unit Weight lots of reference Fixing collar/pillar Printed circuit 10 ZB5-AZ079 0.006 board support Adaptor Electrical blocks 10 ZBZ-010 0.008 (socket) (contact or light) Fixing screw Direct mounting of 10 ZBZ-005 0.007 for printed circuit electrical blocks board on fixing collar/pillar ZB5-AZ079 Mounting electrical blocks 10 ZBZ-006 0.011 with adaptor ZBZ-010 (1) For details of support drilling and printed circuit board : See page /63. Te /43
Separate components and accessories : for heads References Can be used with XAL control stations, see pages 3/6 to 3/11. ZBA-i Pushbutton caps - unmarked For use Type of Colour Sold in Unit Weight with pushbutton lots of reference ZB5-AA0 Flush White 10 ZBA-1 0.001 circular Black 10 ZBA- 0.001 pushbutton Green 10 ZBA-3 0.001 heads supplied Red 10 ZBA-4 0.001 without cap Yellow 10 ZBA-5 0.001 Blue 10 ZBA-6 0.001 6 colours (1) 1 ZBA-9 0.006 ZBL-i Projecting White 10 ZBL-1 0.001 Black 10 ZBL- 0.001 Green 10 ZBL-3 0.001 Red 10 ZBL-4 0.001 Yellow 10 ZBL-5 0.001 Blue 10 ZBL-6 0.001 6 colours (1) 1 ZBL-9 0.006 ZBA-i33 Pushbutton caps - marked (sold in lots of 10) For use Type Marking Colour Unit Weight with of push Text Colour of cap reference ZB5-AA0 Flush I () White Green ZBA-331 0.001 circular Black White ZBA-131 0.001 pushbutton heads supplied II White Green ZBA-336 0.001 without cap Black White ZBA-136 0.001 III White Green ZBA-337 0.001 Black White ZBA-137 0.001 IV White Green ZBA-338 0.001 Black White ZBA-138 0.001 START () White Green ZBA-333 0.001 Black White ZBA-133 0.001 ON White Green ZBA-341 0.001 Black White ZBA-141 0.001 MARCHE White Green ZBA-34 0.001 Black White ZBA-14 0.001 UP() Black White ZBA-343 0.001 DOWN () White Black ZBA-344 0.001 () White Green ZBA-345 0,001!(3) Black White ZBA-334 () 0.001 White Black ZBA-335 () 0.001 O () White Red ZBA-43 0.001 Black ZBA-3 0.001 ARRET White Red ZBA-433 0.001 Black ZBA-33 0.001 STOP () White Red ZBA-434 0.001 Black ZBA-34 0.001 OFF White Red ZBA-435 0.001 Black ZBA-35 0.001 R () White Blue ZBA-639 0.001 (1) Set of 6 different coloured caps : white, black, green, red, yellow, blue. () Double injection moulded marking. (3) Cap supplied not clipped-in, allowing orientation of arrow in 4 directions :!, à, x or v. /44 Te
Separate components and accessories : for heads Can be used with XAL control stations, see pages 3/6 to 3/11. ZBZ-3 ZBY-i101 Standard (30 x 40 mm) legend holders for 8 x 7 mm legends (1) Description Legend Sold Unit Weight Colour Marking in reference lots of Without 10 ZBZ-3 0.001 legend With blank Black or red 10 ZBY-101 0.00 legend bacround (for engraving) White or 10 ZBY-4101 0.00 yellow bacround With 8 x 7 mm Black or red O (black bacround) 1 ZBY-146 0.00 international bacround language O (red bacround) 1 ZBY-931 0.00 marked legend I 1 ZBY-147 0.00 II 1 ZBY-148 0.00 O-I 1 ZBY-178 0.00 I-II 1 ZBY-179 0.00 I-O-II 1 ZBY-186 0.00 AUTO 1 ZBY-115 0.00 STOP 1 ZBY-304 0.00 ZBY-303 With 8 x 7 mm Black or red AUTO-HAND 1 ZBY-364 0.00 English bacround language () AUTO-O-HAND 1 ZBY-385 0.00 marked legend CLOSE 1 ZBY-314 0.00 DOWN 1 ZBY-308 0.00 EMERGENCY STOP 1 ZBY-330 0.00 FAST 1 ZBY-38 0.00 FORWARD 1 ZBY-305 0.00 HAND 1 ZBY-316 0.00 HAND-OFF-AUTO 1 ZBY-387 0.00 INCH 1 ZBY-31 0.00 LEFT 1 ZBY-310 0.00 OFF 1 ZBY-31 0.00 OFF-ON 1 ZBY-367 0.00 ON 1 ZBY-311 0.00 OPEN 1 ZBY-313 0.00 POWER ON 1 ZBY-36 0.00 RESET (red bacround) 1 ZBY-33 0.00 RESET (black bacround) 1 ZBY-3 0.00 REVERSE 1 ZBY-306 0.00 RIGHT 1 ZBY-309 0.00 RUN 1 ZBY-334 0.00 SLOW 1 ZBY-37 0.00 START 1 ZBY-303 0.00 STOP-START 1 ZBY-366 0.00 UP 1 ZBY-307 0.00 (1) Legends, see pages /47 to /49. () Start functions : white letters on black bacround. Stop functions : white letters on red bacround (unless otherwise specified above). Te /45
Separate components and accessories : for heads Can be used with XAL control stations, see pages 3/6 to 3/11. ZBY-107 ZBY-8 /46 Te Standard (30 x 40 mm) legend holders for 8 x 7 mm legends (continued) Description Legend Reference Weight Colour Marking With French Black or red ARRET (red bacround) ZBY-104 0.00 language bacround ARRET (black bacround) ZBY-0104 0.00 marked legend (1) ARRET GENERAL ZBY-19 0.00 ARRET REARMEMENT ZBY-133 0.00 ARRET D'URGENCE ZBY-130 0.00 ARRET-MARCHE ZBY-166 0.00 ARRIERE ZBY-106 0.00 AUTO CYCLE-CYCLE ZBY-198 0.00 AUTO CYCLE-MAIN ZBY-199 0.00 AUTO-MAIN ZBY-164 0.00 AUTO-O-MAIN ZBY-185 0.00 AVANT ZBY-105 0.00 AVANT-O-ARRIERE ZBY-184 0.00 C-P-C-NORMAL ZBY-165 0.00 CYCLE-MAIN ZBY-197 0.00 DECLENCHEMENT ZBY-13 0.00 DEFAUT (black bacround) ZBY-134 0.00 DEFAUT (red bacround) ZBY-135 0.00 DEPART CYCLE ZBY-195 0.00 DESCENTE ZBY-108 0.00 DROITE ZBY-109 0.00 ENCLENCHEMENT ZBY-131 0.00 EN SERVICE ZBY-111 0.00 FERMETURE ZBY-114 0.00 GAUCHE ZBY-110 0.00 HORS SERVICE ZBY-11 0.00 HORS-EN ZBY-167 0.00 LENT ZBY-17 0.00 MAIN ZBY-116 0.00 MARCHE ZBY-103 0.00 MONTEE ZBY-107 0.00 OUVERTURE ZBY-113 0.00 PHASE / PHASE ZBY-196 0.00 REARMEMENT (red bacround) ZBY-13 0.00 REARMEMENT (black bacround) ZBY-013 0.00 SOUS TENSION ZBY-16 0.00 VITE ZBY-18 0.00 With German Black or red AB ZBY-08 0.00 language bacround AUF ZBY-07 0.00 marked legend (1) AUS ZBY-04 0.00 AUS-EIN ZBY-66 0.00 AUS-IN BETRIEB ZBY-67 0.00 AUS-RUCKSTELLUNG ZBY-33 0.00 AUSSCHALTEN ZBY-3 0.00 AUTO-HAND ZBY-364 0.00 AUTO-O-HAND ZBY-385 0.00 AUTOZYKL-HAND ZBY-99 0.00 AUTOZYKL- 1 ZYKL ZBY-98 0.00 C-P-C-NORMAL ZBY-65 0.00 EIN ZBY-03 0.00 EINSCHALTEN ZBY-31 0.00 HAND ZBY-316 0.00 LANGSAM ZBY-7 0.00 LINKS ZBY-10 0.00 NOT-AUS (red bacround) ZBY-30 0.00 NOT-AUS (yellow bacround) ZBY-40001 0.00 NOT-HALT ZBY-9 0.00 ÖFFNEN ZBY-13 0.00 RECHTS ZBY-09 0.00 RUCKSTELLUNG ZBY-3 0.00 SCHLIESSEN ZBY-14 0.00 SCHNELL ZBY-8 0.00 SPANNUNG EIN ZBY-6 0.00 STEUERUNG AUS ZBY-1 0.00 STEUERUNG EIN ZBY-11 0.00 STORUNG (black bacround) ZBY-34 0.00 STORUNG (red bacround) ZBY-35 0.00 VOR ZBY-05 0.00 VOR-O-ZURUCK ZBY-84 0.00 ZURUCK ZBY-06 0.00 ZYKLUS-HAND ZBY-97 0.00 ZYRLUSSTART ZBY-95 0.00 (1) Start functions : white letters on black bacround. Stop functions : white letters on red bacround (unless otherwise specified above).
Separate components and accessories : for heads Can be used with XAL control stations, see pages 3/6 to 3/11. Flush mounting with bezel legend holders (30 x 40 mm) for 8 x 7 mm legends Description For use with Colour Sold in Unit Weight lots of Reference Without legend Circular heads 10 ZBZ-34 0.003 Square heads 10 ZBC-Z34 0.00 ZBZ-34 ZBY-iH101 With blank Circular heads Black or red bacround 10 ZBY-H101 0.004 legend White or yellow bacround 10 ZBY-4H101 0.004 Square heads Black or red bacround 10 ZBC-YH101 0.00 White or yellow bacround 10 ZBC-Y4H101 0.00 Standard (30 x 50 mm) legend holders for 18 x 7 mm legends Description For use with Colour Sold in Unit Weight lots of Reference` Without legend Circular and 10 ZBZ-33 0.001 square heads ZBZ-33 ZBY-610i With blank Circular and Black or red bacround 10 ZBY-6101 0.00 legend square heads White or yellow bacround 10 ZBY-610 0.00 Flush mounting with bezel legend holders (30 x 50 mm) for 18 x 7 mm legends Description For use with Colour Sold in Unit Weight lots of Reference` Without legend Circular heads 10 ZBZ-35 0.003 Square heads 10 ZBC-Z35 0.00 ZBZ-35 ZBY-6H10i With blank Circular heads Black or red bacround 10 ZBY-6H101 0.004 legend White or yellow bacround 10 ZBY-6H10 0.004 Square heads Black or red bacround 10 ZBC-Y6H101 0.003 White or yellow bacround 10 ZBC-Y6H10 0.003 Legends for engraving Description For use with Colour Sold in Unit Weight lots of Reference mm 8 x 7 30 x 40 mm Black or red bacround 10 ZBY-0101 0.001 legend holders White or yellow bacround 10 ZBY-010 0.001 18 x 7 30 x 50 mm Black or red bacround 10 ZBY-5101 0.001 legend holders White or yellow bacround 10 ZBY-510 0.001 Sheets of peel-off legends (with backing board and protective transparent cover) Description For use with Sold in Unit Weight lots of Reference Sheet of 76 30 x 40 mm legend holders 10 ZBY-4100 0.043 8 x 7 mm ZBZ-3 and ZBZ-34 legends Sheet of 40 30 x 50 mm legend holders 10 ZBY-5100 0.044 18 x 7 mm ZBZ-33 and ZBZ-35 legends SIS labelling software Application Reference Weight XBY-1ii Legend design (English version) XBY-1EN 0.060 Legend design (French version) XBY-1FR 0.060 Legend design (German version) XBY-1GE 0.060 Te /47
Separate components and accessories : for heads Can be used with XAL control station, see pages 3/6 to 3/11. 8 x 7 mm marked legends (for 30 x 40 mm legend holders ZBZ-3 and ZBZ-34) Colour Marking Reference Weight ZBY-0178 Black or red International O (black bacround) ZBY-0146 0.001 bacround (1) O (red bacround) ZBY-0931 0.001 I ZBY-0147 0.001 II ZBY-0148 0.001 O-I ZBY-0178 0.001 I-II ZBY-0179 0.001 I-O-II ZBY-0186 0.001 AUTO ZBY-0115 0.001 STOP ZBY-0304 0.001 ZBY-0303 English AUTO-HAND ZBY-0364 0.001 AUTO-O-HAND ZBY-0385 0.001 CLOSE ZBY-0314 0.001 DOWN ZBY-0308 0.001 EMERGENCY STOP ZBY-0330 0.001 FAST ZBY-038 0.001 FORWARD ZBY-0305 0.001 HAND ZBY-0316 0.001 HAND-OFF-AUTO ZBY-0387 0.001 INCH ZBY-031 0.001 LEFT ZBY-0310 0.001 OFF ZBY-031 0.001 OFF-ON ZBY-0367 0.001 ON ZBY-0311 0.001 OPEN ZBY-0313 0.001 POWER ON ZBY-036 0.001 RESET (red bacround) ZBY-033 0.001 RESET (black bacround) ZBY-03 0.001 REVERSE ZBY-0306 0.001 RIGHT ZBY-0309 0.001 RUN ZBY-0334 0.001 SLOW ZBY-037 0.001 START ZBY-0303 0.001 START-STOP ZBY-0366 0.001 UP ZBY-0307 0.001 ZBY-0i104 French ARRET (red bacround) ZBY-0104 0.001 ARRET (black bacround) ZBY-00104 0.001 ARRET GENERAL ZBY-019 0.001 ARRET REARMEMENT ZBY-0133 0.001 ARRET D'URGENCE ZBY-0130 0.001 ARRET-MARCHE ZBY-0166 0.001 ARRIERE ZBY-0106 0.001 AUTO CYCLE-CYCLE ZBY-0198 0.001 AUTO CYCLE-MAIN ZBY-0199 0.001 AUTO-MAIN ZBY-0164 0.001 AUTO-O-MAIN ZBY-0185 0.001 AVANT ZBY-0105 0.001 AVANT-O-ARRIERE ZBY-0184 0.001 C-P-C-NORMAL ZBY-0165 0.001 CYCLE-MAIN ZBY-0197 0.001 DECLENCHEMENT ZBY-013 0.001 DEFAUT (black bacround) ZBY-0134 0.001 DEFAUT (red bacround) ZBY-0135 0.001 DEPART CYCLE ZBY-0195 0.001 DESCENTE ZBY-0108 0.001 DROITE ZBY-0109 0.001 (1) Start functions : white letters on black bacround. Stop functions : white letters on red bacround (unless otherwise specified above). /48 Te
Separate components and accessories : for heads Can be used with XAL control stations, see pages 3/6 to 3/11. 8 x 7 mm marked legends (for 30 x 40 mm legend holders ZBZ-3 and ZBZ-34) (continued) Colour Marking Reference Weight Black or red French ENCLENCHEMENT ZBY-0131 0.001 bacround (1) (continued) EN SERVICE ZBY-0111 0.001 FERMETURE ZBY-0114 0.001 GAUCHE ZBY-0110 0.001 HORS SERVICE ZBY-011 0.001 HORS-EN ZBY-0167 0.001 LENT ZBY-017 0.001 MAIN ZBY-0116 0.001 MARCHE ZBY-0103 0.001 MONTEE ZBY-0107 0.001 OUVERTURE ZBY-0113 0.001 PHASE / PHASE ZBY-0196 0.001 REARMEMENT (red bacround) ZBY-013 0.001 REARMEMENT (black b/grnd.) ZBY-0013 0.001 SOUS TENSION ZBY-016 0.001 VITE ZBY-018 0.001 ZBY-08 German AB ZBY-008 0.001 AUF ZBY-007 0.001 AUS ZBY-004 0.001 AUS-EIN ZBY-066 0.001 AUS-IN BETRIEB ZBY-067 0.001 AUS-RUCKSTELLUNG ZBY-033 0.001 AUSSCHALLEN ZBY-03 0.001 AUTO-HAND ZBY-0364 0.001 AUTO-O-HAND ZBY-0385 0.001 AUTOZYKL-HAND ZBY-099 0.001 AUTOZYKL- 1 ZYKL ZBY-098 0.001 C-P-C-NORMAL ZBY-065 0.001 EIN ZBY-003 0.001 EINSCHALTEN ZBY-031 0.001 HAND ZBY-0316 0.001 LANGSAM ZBY-07 0.001 LINKS ZBY-010 0.001 NOT-AUS (red bacround) ZBY-030 0.001 NOT-AUS (yellow bacround) ZBY-040001 0.001 NOT-HALT ZBY-09 0.001 ÖFFNEN ZBY-013 0.001 RECHTS ZBY-009 0.001 RUCKSTELLUNG ZBY-03 0.001 SCHLIESSEN ZBY-014 0.001 SCHNELL ZBY-08 0.001 SPANNUNG EIN ZBY-06 0.001 STEUERUNG AUS ZBY-01 0.001 STEUERUNG EIN ZBY-011 0.001 STORUNG (black bacround) ZBY-034 0.001 STORUNG (red bacround) ZBY-035 0.001 VOR ZBY-005 0.001 VOR-O-ZURUCK ZBY-084 0.001 ZURUCK ZBY-006 0.001 ZYKLUS-HAND ZBY-097 0.001 ZYRLUSSTART ZBY-095 0.001 (1) Start functions : white letters on black bacround. Stop functions : white letters on red bacround (unless otherwise specified above). Te /49
Separate components and accessories : for heads Sheets of legends for pushbuttons, switches and pilot lights XB5-A (1) Description Marking Sold in Unit Weight lots of Reference Sheet of 66 Without 10 ZBY-1101 0.017 circular peel-off transparent International O 10 ZBY-1146 0.017 self-adhesive legends I 10 ZBY-1147 0.017 II 10 ZBY-1148 0.017 III 10 ZBY-1149 0.017 AUTO 10 ZBY-1115 0.017 ZBY-1101 STOP 10 ZBY-1304 0.017! 10 ZBY-191 0.017 English HAND 10 ZBY-1316 0.017 OFF 10 ZBY-131 0.017 ON 10 ZBY-1311 0.017 START 10 ZBY-1303 0.017 French ARRET 10 ZBY-1104 0.017 ARRIERE 10 ZBY-1106 0.017 AVANT 10 ZBY-1105 0.017 DESCENTE 10 ZBY-1108 0.017 MAIN 10 ZBY-1116 0.017 MARCHE 10 ZBY-1103 0.017 MONTEE 10 ZBY-1107 0.017 German AB 10 ZBY-108 0.017 AUF 10 ZBY-107 0.017 AUS 10 ZBY-104 0.017 EIN 10 ZBY-103 0.017 Sheet of 66 Without 10 ZBC-Y1101 0.017 square peel-off transparent self-adhesive legends Circular legends for Emergency stop mushroom heads (yellow or white bacround) ZBY-i330 Diameter Marking, on Reference Weight yellow bacround mm 60 Without ZBY-9101 0.004 EMERGENCY STOP ZBY-9330 0.004 ARRET D'URGENCE ZBY-9130 0.004 NOT-AUS ZBY-930 0.004 ARRESTO EMERGENZA ZBY-9630 0.004 NODSTOP ZBY-98301 0.004 90 Without ZBY-8101 0.008 EMERGENCY STOP ZBY-8330 0.008 ARRET D'URGENCE ZBY-8130 0.008 NOT-AUS ZBY-830 0.008 ARRESTO EMERGENZA ZBY-8630 0.008 PARADA DE EMERGENCIA ZBY-8430 0.008 (1) Can be used with XAL control stations, see pages 3/6 to 3/11. /50 Te
Separate components and accessories References Accessories Description Application Sold in Unit Weight lots of reference Cable ducting Fixes beneath head 10 AF1-XA1 0.030 support AF1-XA1 M5 x 10 screw Fixing cable ducting 100 AF1-VB510 0.003 with hexagonal slotted head AF1-VB510 Support Pushbuttons, switches 1 DX1-AP5 0.160 and pilot lights XB5-A Metal guards Ø 40 Emergency stop Black 1 ZBZ-160 0.046 Padlocking and mushroom head possible pushbuttons, either standard or trigger action Red 1 ZBZ-1604 0.046 Yellow 1 ZBZ-1605 0.046 ZBZ-160i Blue 1 ZBZ-1606 0.046 Plastic blanking For Ø control 10 ZB5-SZ3 0.008 plug, round, and signalling units black with circular head ZB5-SZ3 Plastic blanking For Ø control 10 ZB5-SZ5 0.009 plug, square, and signalling units black with square head Add-on square Gives square appearance 10 ZB5-AZ31 0.00 trim to circular heads ZB5-A Nut Fixing head 10 ZB5-AZ901 0.00 ZB5-AZ905 Bezel tool Tightening head fixing 1 ZB5-AZ905 0.160 nut ZB5-AZ901 Anti-rotation Heads 10 ZB5-AZ90 0.008 plate Modules for AS-i interface, see page 1/49. Te /51
Separate components, accessories and replacement parts References BA 9s bulbs and associated accessories Description Rating Colour Sold in Unit Weight lots of reference DL1-CJ0iii LEDs on z 4 V White 1 DL1-CJ041 0.00 BA 9s base Green 1 DL1-CJ043 0.00 Red 1 DL1-CJ044 0.00 Yellow 1 DL1-CJ045 0.00 Blue 1 DL1-CJ046 0.00 DL1-CEiii 6 V - 1. W White 1 DL1-CD0061 0.00 Green 1 DL1-CD0063 0.00 Red 1 DL1-CD0064 0.00 Yellow 1 DL1-CD0065 0.00 DL1-CFiii Blue 1 DL1-CD0066 0.00 Incandescent 6 V - 1. W 10 DL1-CB006 0.00 bulbs 4 V - W 10 DL1-CE04 0.00 10 130 V -.4 W 10 DL1-CE130 0.00 Neon bulbs 10 130 V 10 DL1-CF110 0.00 XBF-X13 30 40 V 10 DL1-CF0 0.00 Fluorescent 30 40 V Green 1 DL1-CG0 0.00 bulbs Blue 1 DL1-CH0 0.00 Bulb extractor 1 XBF-X13 0.005 Lens cap Illuminated 1 ZBZ-8 0.009 tightening pushbuttons tool with flush push ZBZ-8 Replacement keys for emergency stop trigger action mushroom head and selector switch Description Reference Weight ZBG-455 Set of keys n 455 ZBG-455 0.013 n 4A185 ZBD-A185 0.014 n Z4 ZBD-Z4 0.013 n LU1 ZBD-LU1 0.014 n LU ZBD-LU 0.014 n LU3 ZBD-LU3 0.014 n LU4 ZBD-LU4 0.014 n LU5 ZBD-LU5 0.014 n LU6 ZBD-LU6 0.014 n LU7 ZBD-LU7 0.014 n LU8 ZBD-LU8 0.014 n LU9 ZBD-LU9 0.014 n LU10 ZBD-LU10 0.014 n LU11 ZBD-LU11 0.014 n LU1 ZBD-LU1 0.014 n LU13 ZBD-LU13 0.014 n LU14 ZBD-LU14 0.014 n 8D1 ZBD-8D1 0.014 n 41E ZBG-41E 0.014 n 458A ZBG-458A 0.014 n 50E ZBG-50E 0.014 n 3131A ZBG-3131A 0.014 /5 Te
Replacement parts ZBP-0 ZBW-008 ZBV-01i3 ZBV-01i Clear boots Description For use with Sold in Unit Weight lots of reference Single boots Booted pushbuttons with circular head 10 ZBP-0 0.00 Booted pushbuttons with circular head 10 ZBP-0A 0.00 used in food industry applications Double boots Double-headed pushbuttons with or 10 ZBW-008 0.005 without pilot light Double-headed pushbuttons used in 10 ZBW-008A 0.005 food industry applications Lens caps For use with Colour Sold in Unit Weight lots of reference Circular lens caps for LED light sources. Can be used with XAL control station, see page 3/10. Pilot lights White 10 ZBV-0113 0.00 Green 10 ZBV-0133 0.00 Red 10 ZBV-0143 0.00 Yellow 10 ZBV-0153 0.00 Blue 10 ZBV-0163 0.00 5 different colour grooved lenses (1) 1 ZBV-0103S 0.010 Illuminated pushbuttons White 10 ZBW-9113 0.00 with flush push Green 10 ZBW-9133 0.00 Red 10 ZBW-9143 0.00 Yellow 10 ZBW-9153 0.00 Blue 10 ZBW-9163 0.00 Illuminated pushbuttons White 10 ZBW-9313 0.00 with projecting push Green 10 ZBW-9333 0.00 Red 10 ZBW-9343 0.00 Yellow 10 ZBW-9353 0.00 Blue 10 ZBW-9363 0.00 Square lens caps for LED light sources. Can be used with XAL control station, see page 3/10. Pilot lights White 10 ZBC-V0113 0.00 Green 10 ZBC-V0133 0.00 Red 10 ZBC-V0143 0.00 Yellow 10 ZBC-V0153 0.00 Blue 10 ZBC-V0163 0.00 Illuminated pushbuttons White 10 ZBC-W9113 0.00 with flush push Green 10 ZBC-W9133 0.00 Red 10 ZBC-W9143 0.00 Yellow 10 ZBC-W9153 0.00 Blue 10 ZBC-W9163 0.00 Illuminated pushbuttons White 10 ZBC-W9313 0.00 with projecting push Green 10 ZBC-W9333 0.00 Red 10 ZBC-W9343 0.00 Yellow 10 ZBC-W9353 0.00 Blue 10 ZBC-W9363 0.00 Circular lens caps for incandescent and neon light sources Pilot lights White 10 ZBV-011 0.00 Green 10 ZBV-013 0.00 Red 10 ZBV-014 0.00 Yellow 10 ZBV-015 0.00 Blue 10 ZBV-016 0.00 Clear 10 ZBV-017 0.00 Illuminated pushbuttons White 10 ZBW-911 0.00 with flush push Green 10 ZBW-913 0.00 Red 10 ZBW-914 0.00 Yellow 10 ZBW-915 0.00 Blue 10 ZBW-916 0.00 Clear 10 ZBW-917 0.00 Illuminated pushbuttons White 10 ZBW-931 0.00 with projecting push Green 10 ZBW-933 0.00 Red 10 ZBW-934 0.00 Yellow 10 ZBW-935 0.00 Blue 10 ZBW-936 0.00 Clear 10 ZBW-937 0.00 (1) White, Green, Red, Yellow, Blue. Te /53
pages 1/ to 1/9 pages 1/10 to 1/13 pages 1/54 to 1/61 Harmony style 4 Pushbuttons, switches and pilot lights, with chromium plated metal bezel Separate components and accessories References Accessories Description Application Sold in Unit Weight lots of reference 1 Cable ducting Fixes beneath head 10 AF1-XA1 0.030 support AF1-XA1 M5 x 10 screw Fixing cable ducting 100 AF1-VB510 0.003 with hexagonal slotted head Support Pushbuttons, switches 1 DX1-AP5 0.160 and pilot lights XB4-B AF1-VB510 Metal guards Ø 40 Emergency Black 1 ZBZ-160 0.046 Padlocking stop and mushroom possible head pushbuttons Chrome 1 ZBZ-1603 0.046 Red 1 ZBZ-1604 0.046 Yellow 1 ZBZ-1605 0.046 ZBZ-160i Blue 1 ZBZ-1606 0.046 Metal blanking For Ø control 10 ZB4-SZ3 0.03 plug, round, and signalling units chromium plated (1) ZB4-SZ3 Plastic blanking For Ø control 10 ZB5-SZ3 0.009 plug, round, and signalling units black () Modules for AS-i interface Description Application Sold in Unit Weight lots of reference ZB5-SZ3 Mounted on panel, with a Harmony style pushbutton Profil P7.0 41/0 direct supply 1 XBZ-S43 0.100 for AS-i bus (1) Requires a ZB4-BZ009 body/fixing collar for mounting. () Fixing nut included with blanking plug. Te 1/49