Related Poducts am ollowes Rolle ollowes Ⅱ-2 Ⅱ-2
and Assued by Poven Tack Recod Reliable am ollowes and Rolle ollowes am ollowes and Rolle ollowes have stuctues o needle olles embedded in thick s. These beaings ae designed o otation o the, with small iction coeicient and excellent otation peomance. ecause adial cleaance o these beaings ae designed to be small to eectively enlage the loading aea, they mitigate the shock load when the oute diamete guides in diect contact with the mating cam guide suace, and ensue stable and long lie. Poviding wide vaiety o models as seies o both am ollowes with studs and Rolle ollowes with inne ings, suitable beaings can be selected o vaious use conditions. They ae hence widely used o cam mechanisms and linea motion o tanse machines. am ollowe Seies Even the mating guide suaces ae maintenance ee!! "-Lube Unit", extenal lubication pats o am ollowes -Lube Unit o am ollowes -Lube unit -Lube Rolle ollowe Seies Ⅱ-2 Ⅱ-2
am ollowes exagon socket am ollowes ae studded beaings with needle olles in the thick. The iction coeicient designed o otation o the is small and the beaing oes excellent otation peomance. am ollowes have high igidity and accuacy as ollowe beaings o vaious cam mechanisms and guide olles o linea motion and ae used o a wide ange o uses such as machine tools, industial obots, electonic pats, and oice automation equipment. Needle olle age End plate -Lube unit Identiication Numbe and Speciication Example o an Identiication Numbe The speciication o am ollowes seies is indicated by the identiication numbe. In addition, o application o mateial, olle guide, seal stuctue and shape o oute diamete suace to each models, ee to the dimension table. 2 5 7 Aangement example S P Aangement example 2 0 R Aangement example 5 W R Aangement example W R /S Model Page Ⅱ-29 Oute ing 2 imensions Page Ⅱ-29 ease nipple -Lube Unit o am ollowes Mateial Page Ⅱ-2 -Lube Unit o am ollowes is a lubication pat to mount into am ollowes. This supplies necessay lubication oil to the oute diamete suace and the cam guide suace o am ollowes and eliminates the need o outine gease eed. L 5 Rolle guide stuctue Page Ⅱ-2 Page Ⅱ-2 Points oute diamete suace Page Ⅱ-2 Substantial poduct lineup Ou substantial poduct lineup oes an extemely-small-sized miniatue, a good o installation eos with a built-in thust washe, a maintenance ee with pe-packed solid lubicant, and othe s. 's oiginal stuctue allowing gease eed om stud head The socket with hexagon hole does not limit gease eed diections and even allows gease up om the stud head. 7 Accuacy class Page Ⅱ-22 Wide selection o poduct speciications o you use The mateial, the olle guide, the seal stuctue, and the shape o oute diamete suace ae selectable o an optimal poduct speciication accoding to you use. 2 5 The socket with hexagon hole o easy mounting The socket with hexagon hole on the stud head allows easy mounting with a hexagon wench. New concept o -Lube Unit o am ollowes The -Lube unit supplies lubication oil to the oute diamete suace and the cam guide suace o am ollowes. ombining am ollowes eliminates the need o outine gease eed to the cam guide suace and educes iction and wea. Related Poducts (am ollowe) Ⅱ-27 Ⅱ-2
Identiication Numbe and Speciication -Model imensions- 2 Model imensions Miniatue Type am ollowes S Thust isk Type Miniatue am ollowes SW Standad Type am ollowes am ollowes Thust isk Type am ollowes W -Lube am ollowes W/S Solid Eccentic Type am ollowes ES Eccentic Type am ollowes E entalized Lubication Type am ollowes cylindical -RU entalized Lubication Type am ollowes cylindical -U Easy Mounting Type am ollowes -SU ylindical Rolle am ollowes NU Inch seies am ollowes With hexagon hole R Inch seies am ollowes With dive slot R Inch seies am ollowes With hexagon hole R Inch seies am ollowes With dive slot R o applicable models and dimensions, see Table. and Table.2. Repesents stud diamete.unit: o inch seies am ollowes, oute diamete dimensions ae indicated in / inch. Table.2 Models and dimensions Shape Model haacteistics diamete Solid Eccentic Type am ollowes Eccentic Type am ollowes entalized Lubication Type am ollowes ES E -RU -U Rotation o eccentic stud can align height o oute diamete when multiple ings ae used. Eccenticity is om 0. to 0. and it can be mounted to the same mounting hole as the standad am ollowes. As the eccentic colla is ixed to the stud, positioning in the adial diection elative to the mating cam guide suace is easy. Eccenticity is om 0. to.5. As a tap hole is pepaed o the centalized piping on the stud head, this is optimal o applications whee centalized oil piping is necessay. to to to Table. Models and dimensions Shape Model haacteistics diamete Miniatue Type am ollowes Thust isk Type Miniatue am ollowes Standad Type am ollowes S SW Ultaine needle olle is incopoated to the o beaing so the compact design is ealized with oute diamete which is small elative to the stud diamete. This is used o electonic pats device, oice automation equipment and small index device. Miniatue Type am ollowes incopoated with special synthetic esin thust washes excellent in abasion and heat esistance. It eceives axial load o geneated due to installation eos to pevent iction and wea on the sliding suace. 2 to. to Easy Mounting Type am ollowes ylindical Rolle am ollowes Inch seies am ollowes -SU NU R R R R As the stud is stepped so that ixing o the stepped section om the uppe ace with set scew becomes easy, this is optimal o applications such as pallet change. The ull complement olle beaing with double ow cylindical olles incopoated in the oute ing can eceive lage adial load and some axial load. 2 s o inch seies am ollowes ae available: R and R. R is a heavy load o lage load ating with black oxide ilm teatment. to 0 to.2 to 500 This is a basic am ollowes model. Size vaiations om to in stud diamete ae available. to am ollowes am ollowes with pe-packed gease at easonable pice. to Thust isk Type am ollowes W As it is incopoated with special synthetic esin thust washes excellent in abasion and heat esistance, it eceives axial load o geneated due to installation eos to pevent iction and wea on the sliding suace. to -Lube am ollowes W/S Maintenance ee poduct with themoset solid lubicant "-Lube" pe-packed in the beaing space. "-Lube" is heat-teated and solidiied lubicant composed o an amount o lubication oil and paticulate ulta-high molecula polyethylene esin. Rotation o the beaing allows a modeate amount o lubicant to always exude om "-Lube" onto the aceway to maintain lubication peomance o the beaing o long time. 5 to Related Poducts (am ollowe) Ⅱ-29 Ⅱ-
-Mateial Type Rolle uide Type Stuctue Extenal Ring Oute iamete Suace- -Accuacy lass- igh cabon made made In addition to high cabon poducts, stainless poducts ae also available. poducts ae suited o applications whee oil should be avoided, wate is spatteing, o it is used in a clean oom. Mateial Rolle guide ( ) ull complement olle Speciy the component pat mateial. o applicable models and dimensions, see dimension table. <igh cabon made> o geneal use... Speciy the olle guide. o applicable models and dimensions, see dimension table. te ( )ylindical Rolle am ollowes ae ull complement olles with no. < made> o sections whee oil should be avoided and envionment whee wate is spatteing... 7 Accuacy class Table 2 Toleance Name lass im. toleance o oute ing oute diamete im. d toleance o stud diamete im. toleance o oute ing width Accuacy class 0 Accuacy class ( ) Accuacy class 5 ( ) Accuacy class ( ) P P5 P te ( )Applied o miniatue am ollowes S and SW. Miniatue am ollowes S, SW See Table. Standad am ollowes( ) o details o accuacy, see Table 2, Table., Table.2, and.. We also povide special accuacy class poduct. o details, please contact. owned ylindical owned 0 50 h h7 0 0 0 0 See Table.2 te ( )Applied o am ollowes othe than miniatue am ollowes and inch seies am ollowes. Inch seies am ollowes 0 50 0 0 unit: m ylindical See Table. As olle cage has smalle iction coeicient, it is suited o high-speed otation. ull complement olle is suited o sections whee lowspeed otation, oscillatoy movement o heavy load exists. o sections with high numbe o otations... o sections with low-speed otation o heavy load... Table. Toleance and allowance o miniatue am ollowes S and SW mp im. toleance o mean oute diamete within a single suace K ea Radial delection unit: m lass 0 lass lass 5 lass lass 0 lass lass 5 lass L L L L 0 0 7 0 5 0 5 5 <> <ull complement olle> 5 stuctue ( ) Shield is shaped so that cleaance between the and stud colla element and between the and end plate become smalle and labyinth is omed. The sealed incopoates the seal stuctue, which can pevent oeign substances om enteing. Speciy the seal stuctue. o applicable models and dimensions, see dimension table. te ( )entalized Lubication Type and Easy mounting Type am ollowes ae sealed with no. o geneal use... o dust potection and gease leak pevention... Table.2 Toleance and allowance o standad am ollowes cylindical minal oute diamete mp im. toleance o mean oute diamete within a single suace sp Oute diamete vaiation within the suace mp Mean oute diamete vaiation within a single suace unit: m K ea Radial unout Above elow L 0 0 5 0 9 7 5 50 0 50 0 0 0 0 0 0 5 9 oute diamete suace ylindical owned owned is eective o mitigation o end load geneated due to installation eos. ylindical is suited i the applied load is lage o hadness o cam guide suace is low. R <> o educing installation eos... R <> Speciy the shape o oute diamete suace. o applicable models and dimensions, see dimension table. o sections with high applied load... o cam guide suaces without enough hadness... Table. Toleance and allowance o inch seies am ollowes cylindical minal oute diamete mp im. toleance o mean oute diamete within a single suace sp Oute diamete vaiation within the suace mp Mean oute diamete vaiation within a single suace unit: m K ea Radial unout Above elow L 0 5 7 5 50 0 50 0 0 0 0 9 Related Poducts (am ollowe) Ⅱ-2 <owned > <ylindical > N=0.02kg=0.22lbs. =0.097inch Ⅱ-22
Load Rating and Lie asic dynamic load ating asic dynamic load ating ees to a static adial load with a cetain diection and size with which 90% o a goup o the same am ollowes can un one million otations without mateial damages due to olling contact atigue when they ae opeated in the same conditions. asic static load ating 0 asic static load ating ees to a static adial load with a cetain diection and size with a cetain contact stess at the cente o contact pats o the olling elements and a aceway unde maximum load. Lie The basic ating lie calculation omulas ae shown below. L0 = ( P ) 0/ whee, L0 : asic ating lie, 0 ev. : asic dynamic load ating, N P : ynamic equivalent adial load, N Theeoe, lie time can be calculated by applying the otation speed to the omula below. Lh = 0 L0 0n whee, Lh : asic ating lie epesented as time h n : Rotation speed min - Static saety acto 2 Static saety acto can be obtained by the ollowing equation and typical values ae indicated in Table. s = 0 P 0 whee, s : Static saety acto 0 : asic static load ating N P 0 : Static equivalent adial load maximum load N Load acto Load actually applied on the am ollowes becomes lage than load theoetically calculated om vibation and shock. Theeoe, multiply the load by the load acto indicated in the Table 5. Table 5 Load acto Opeating condition Smooth opeation ee om shock mal opeation Opeation with shock load Allowable Static Load w.2.2.5. Load that can be applied to the am ollowes may in some cases be deined based on lexual and sheaing stength o the stud and stength, instead o load ating as needle olle beaing. o this eason, the maximum allowable static load is deined. Intenal Radial leaance Intenal adial cleaance o am ollowes is indicated in the Table. Table Intenal adial cleaance value Miniatue am ollowes S, S W it Standad am ollowes () Identiication numbe ylindical Rolle am ollowes Recoended it o the am ollowes stud and mounting hole and toleances o dimensions o mounting hole ae indicated in the Table 7 and Table, espectively. As it is used as mounted by a cantileve, pocess the mounting hole not to let any play in the itting section whee a lage shock load is applied especially. Inch seies am ollowes unit: m Intenal adial cleaance Minimum S. to S5 to 5 - R, R -, R -, R 9 7 S - R0, R0-, R0-, R 5 - to - - R to R22, R to R22 5 - to - - R2 to R, R2 to R 0-2 to -2 - R, R0 to R5 0 0 - - - R 5 50 - - NU0 to NU2-5 - - NU2- to NU-2-50 te ( ) Applied o all am ollowes othe than miniatue am ollowes, ylindical Rolle am ollowes and inch seies am ollowes. Table 7 Recoended it Model o beaing Miniatue am ollowes S, SW Standad am ollowes () Inch seies am ollowes Toleance class o mounting hole te ( ) Applied o am ollowes othe than miniatue am ollowes and inch seies am ollowes. 7 7 Table Static saety acto eaing use conditions When high otation accuacy is equied mal opeating conditions When smooth opeations ae not equied with a high pioity unde nomal opeating conditions When it is aely otated s.5 Table Toleances o dimensions o mounting hole lassiication o diamete 7 7 Above elow L L L - 0 0 0 22 0 0 0 0 2 9 0 5 0 unit: m 0 0 0 0 2 0 0 0 50 50 0 0 Related Poducts (am ollowe) Ⅱ-2 N=0.02kg=0.22lbs. =0.097inch Ⅱ-2
Tack Load apacity Tack load capacity ees to allowable load with which the mating membe mateial can continuously endue the contact between am ollowes oute ing and mating cam guide suace planewithout geneating deomation o indentation. Tack load capacities indicated in the Table 9., Table 9.2 and Table 9. ae values on the assumption that hadness o the mating membe mateial is 0R tensile stength: 50 N/ 2 and i hadness is not 0R, these values must be multiplied by tack load capacity actos indicated in the Table 0. I the lubication between and mating cam guide suace is not suicient, seizue and wea may be geneated depending on use conditions. Special cae is equied o lubication and suace oughness at high otation speed o the cam mechanism, etc. Table 9. Tack load capacity o miniatue am ollowes S, SW Identiication numbe (ylindical ) Tack load capacity S. S2 2 S2.5 S 5 S 799 S5 S 0 unit: N Table 9. Tack load capacity o inch seies am ollowes Identiication numbe (owned ) Tack load capacity Identiication numbe (ylindical ) Tack load capacity Table 9.2 Tack load capacity o standad am ollowes ( ) Identiication numbe (owned ) Tack load capacity Identiication numbe (ylindical ) unit: N Tack load capacity R 52 R 7 790 5 R 79 5 R 00 00 R 00 0 R 0 0 0 0-R 2 0 0-5 5 R 2 70 7 00 -R 2 70-7 0 R 00 0 R 0 500 R 5 90 0 -R 5-000 2 R 50 2 0 2-R 0 2-9 00 R 9 2 52 700 -R 9 990-5 000-2R 0 00-2 59 0 te ( ) Applied o am ollowes othe than miniatue am ollowes and inch seies am ollowes. Identiication numbe (owned ) Tack load capacity Identiication numbe (ylindical ) unit: N Tack load capacity R R 770 R 2 0 - - R -R 770 R - 2 R -R 0 R - 2 - - R 9 R 9 R 9 2 50 R0 R 0 R0 - - R0-R 0 R0-0 R0-R 579 R0-0 - - R- R 5 R R R R 500 R- R 5 R 500 R R R 5 0 R- R 050 R 5 0 R R 970 R 7 20 R- R R 7 20 R R 2 0 R 7 70 R- R 0 R 7 70 R R 2 0 R 0 700 R- R 2 0 R 0 700 R22 R 050 R22 00 R22- R 2 50 R22 00 R2 R 0 R2 5 00 R2- R 0 R2 5 00 R2 R R2 700 R2- R R2 700 R2 R R2 2 000 R2- R R2 2 000 R R 0 R 22 500 R- R 0 R 22 500 R R 5 050 R 900 R- R 5 90 R 900 R R 5 900 R 700 R- R 0 R 700 - - R0- R 970 R0 5 000 - - R- R 0 0 R 9 500 - R 0 R- R 00 R 0 - - R52- R 700 R52 9 00 - - R5- R 00 R5 7 000 - - R- R 00 R 000 Table 0 Tack load capacity acto adness Tensile stength Tack load capacity acto R N/ 2 owned ylindical 70 0.22 0.7 0 0. 0. 950 0.5 0.5 00 0.5 0.75 0 5 9 0 0.00.00 2.2.5.52. 5.5.5 2.27.7 50 70 2.0.99 52 0. 2. 5 2 05.2 2. 5 2 50 5. 2.97 5 2 0.2.9 Allowable Numbe o Rotations The allowable numbe o otation o am ollowes is aected by mounting and use conditions. o d n value with only pue adial load applied, use values in Table o lowe as eeences. Unde actual use conditions, it is ecoended to use d n, one tenth o indicated values, taking into account the eect o axial load. -Lube am ollowes and am ollowes with -Lube unit mounted, use 0,000 o lowe as eeence o the d n value. d n value = d n whee, d : am ollowes stud diamete n : Rotation speed min - Table d n value o am ollowes Lubication Model o beaing ease lubication Oil lubication 000 0 000 ull complement olle 2 000 70 000 ylindical Rolle am ollowes 000 0 000 Lubication o beaing with pe-packed gease, ee to the Table. Alvania ease S2 o SOWA SELL SEKIYU K. K. is pepacked as lubication gease. ill gease om the stud oil hole beoe using any beaing without pe-packed gease. Othewise, inceased wea on the olling contact suace and/o shot lie time may be esulted. Table am ollowes with pe-packed gease Model o beaing diamete d ( ) Miniatue Type am ollowes S Thust isk Type Miniatue am ollowes SW Standad Type am ollowes Thust isk Type am ollowes Solid Eccentic Type am ollowes Eccentic Type am ollowes W ES E : With gease : Without gease lass ull Shield ed complement olle d 5 d 0 d am ollowes -Lube am ollowes W/S 2 entalized Lubication Type am RU ollowes cylindical U Easy Mounting Type am ollowes -SU ylindical Rolle am ollowes NU Inch seies am ollowes R With hexagon hole R With dive goove Inch seies am ollowes R With hexagon hole R With dive goove te ( ) o Eccentic Type am ollowes (E), scew diamete speciied in the dimension table. ( 2 ) Themoset solid lubicant -Lube is pe-packed in the beaing space. Related Poducts (am ollowe) Ⅱ- N=0.02kg=0.22lbs. =0.097inch Ⅱ-2
Oil ole Accessoy Oil hole position o the am ollowes is accoding to the Table. ill gease by installing a supply nozzle indicated in the Table to the JIS 90:99 staight gease gun and pessing the supply nozzle onto the gease nipple and gease eed plug sotly. When the NPT gease nipple o the special speciications indicated in the Table 9 and NP gease nipple indicated in the Table 7 ae mounted, you may also ill gease by pessing the gease gun without using a supply nozzle speciied in the Table. In addition, oil cannot be ed o those without oil hole descibed in the Table. Table Location o oil hole Model o beaing diamete d ( ) lass ead : With oil hole 2 oute diamete section end Miniatue Type am ollowes S Thust isk Type Miniatue am ollowes SW Standad Type am ollowes Thust isk Type d am ollowes W Solid Eccentic Type am ollowes ES d 0 ( 2 ) Eccentic Type am ollowes E ylindical Rolle am ollowes NU 0d ( ) am ollowes -Lube am ollowes W/S entalized Lubication d Type am ollowes -RU, -U( ) <d Easy Mounting Type am ollowes -SU Inch seies am ollowes R With hexagon hole Inch seies am ollowes R With dive slot Inch seies am ollowes R With hexagon hole Inch seies am ollowes R With dive slot 2 d 0 ( 2 ) 0<d ( 5 ) d.. <d d.. <d d 7.9 7.9d d 7.9 7.9d te ( ) o Eccentic Type am ollowes (E), scew diamete speciied in the dimension table. oweve, oil hole on the stud oute diamete suace cannot be used. ( 2 ) ease can be ed om the Re-gease itting located inside the hexagon socket on the head. ( ) The gease nipple is integated in the hexagon socket on the head. ease can be ed om the head and stud end by spiking the supplied gease nipple into the oil hole on the stud end. ( )ead and stud end have a tap hole o piping. ( 5 ) ease can be ed om the gease nipple located inside the hexagon socket on the head. Table Models and dimensions o supply nozzle Model A-5T A-50R -50R A-50 A-5-50 -5.5 R2.5 7 R2.5 imensions and shape Width acoss lats 5 t 5 ompatible gease nipple and Regeese itting NP-( ) NP-( ) Re-gease itting NP-( ) NP-( ) NPT- NPT- NP2 NP NP- NP te ( ) SP- o YAMAA ORPORATION can also be used. Remak: The supply nozzles shown in the table can be mounted on the main body o a coon gease gun available on the maket shown below. I needed, speciy the supply nozzle model and contact. Supply nozzle 0 Width acoss lats 5 0 Width acoss lats 5 0 Width acoss lats 5 5 Width acoss lats 0 Width acoss lats 5 5 Width acoss lats 5 5 PT/ Width acoss lats PT/ Width acoss lats PT/ Width acoss lats PT/ Width acoss lats PT/ Width acoss lats PT/ Width acoss lats Width acoss lats PT/ Main body o gease gun Accessoies o am ollowes ae indicated in ig. 5. imensions o gease nipple supplied as a standad accessoy and dimensions o caps o ail mounting holes and jigs o oil hole on the no-eeding side ae speciied in the Table, Table 7, and Table, espectively. Table 5 Accessoies Model o beaing diamete d ( ) lass Miniatue Type am ollowes S Thust isk Type Miniatue am ollowes SW Standad Type am ollowes Thust isk Type am ollowes W Solid Eccentic Type am ollowes ES ylindical Rolle am ollowes NU aps o ail ease mounting nipple holes : Supplied Nut Sping washe d 0 d am ollowes -Lube am ollowes W/S Eccentic Type am d 0 ollowes E d entalized Lubication Type am ollowes cylindical -RU, -U Easy Mounting Type am ollowes -SU Inch seies am ollowes R With hexagon hole d. 9.52d Inch seies am ollowes R With dive goove Inch seies am ollowes R With hexagon hole d 7.9.d Inch seies am ollowes R With dive goove te ( ) o Eccentic Type am ollowes (E), scew diamete speciied in the dimension table. Table imensions o gease nipple o standad am ollowes ( ) Identiication numbe Table 7 imensions o gease nipple o Inch seies am ollowes Identiication numbe imensions o gease nipple d L L W Applicable beaing NP2. 7.5 9 5.5.5 R to R0-, R- to R NP.7 7.5 0 5.5.5 R to R22, R to R22 NP-.7 7.5.5 5.5.55 R2 to R, R2 to R NP. 2 R, R to R Table imensions o caps o ail mounting holes on Inch seies am ollowes Identiication numbe imensions o caps o ail mounting holes Jig dimensions t d 0-0. US2. 0.. 2. R to R0- Applicable beaing US.7 0...7 R to R, R to R US. 0.5. 5.2 R, R to R d L imensions o gease nipple diamete d ( 2 ) d L W NP- 5 5.5 NP- 7 2 te ( ) Applied o am ollowes othe than Inch seies am ollowes. ( 2 ) o Eccentic Type am ollowes, scew diamete speciied in the dimension table. Remak The same gease nipple as the accessoy is integated in the hexagon socket on the head. Jig d d W L L W Related Poducts (am ollowe) Ⅱ-27 N=0.02kg=0.22lbs. =0.097inch Ⅱ-2
Special Speciication Opeating Tempeatue Range ease nipple supplied as an accessoy can be eplaced with the gease nipple indicated in the Table 9 upon equest. With this gease nipple, you may ill gease by pessing the JIS 90:99 staight gease gun diectly onto it without using the the supply nozzle in the Table. When you equest it, indicate the identiication numbe with "/NP" at the end. Example o an Identiication Numbe R / NP Opeating tempeatue ange o am ollowes is - to 0. oweve, note that the maximum allowable tempeatue vaies in models indicated in the Table 2. Table 2 Limitation o opeating tempeatue ange lass Model Shield ed diamete d Miniatue Type am ollowes S Thust isk Type Miniatue am ollowes SW d =2 0( ) Loading Oil hole ig. 2 Oil hole location and loading diection ❺ The length o a mounting hole o Eccentic Type am ollowes must be 0.5 o moe longe than the dimensions eccentic colla widthspeciied in the dimension table.see ig. Table 9 imensions o NPT gease nipple Identiication numbe imensions o gease nipple diamete d ( ) d L L W NPT- 2 NPT- te ( ) o Eccentic Type am ollowes, scew diamete speciied in the dimension table. Table imensions with NPT gease nipple mounted Identiication numbe d imensions diamete d ( ) 5 NPT- 2 NPT- 2 W te ( ) o Eccentic Type am ollowes, scew diamete speciied in the dimension table. L 5 L Standad Type am ollowes Thust isk Type am ollowes W Standad Type am ollowes made o stainless Thust isk Type am ollowes made o stainless W -Lube am ollowes W/S Mounting d =, d =5 d 5 d te ( )00 when used continuously. ( 2 )elow 0 is ecoended o long use. 0( ) 0 0 0 0( ) 0 0( 2 ) ❶ Make the cente line o the mounting hole pependicula to the am ollowes movement diection and accuately position and ix it on the side ace o the mounting hole with a nut in accodance with the dimensions in the dimension table.see ig. At this point, do not stike the colla element o the am ollowes diectly with a hae o the like. It may lead to otation ailue o cack. ❸ Tighten the nut to the extent not to exceed the maximum tightening toque speciied in the dimension table.with excessive tightening toque, the stud scew may be boken. In addition, use a lock nut, sping washe o special stop nut as necessay to pevent looseness depending on use conditions. ❹ o Solid Eccentic Type am ollowes and Eccentic Type am ollowes, a eeence position o adjustment is deined as the mak at the side ace o stud colla located in the position speciied in the ig.. Use this as a eeence. Adjust the position by otating it using the hexagon socket on the stud head. Use a nut and a sping washe o the like o ixing o the stud. e sue to tighten the nut to the extent not to exceed the maximum tightening toque speciied in the dimension table. I it is necessay to maintain exact eccentic adjustment quantity when shock load is applied, it is ecoended to make a hole on each stud and eccentic colla though the housing to ix it with a dowel pin as indicated in the ig.. oweve, the stud with diamete o less eccentic colla diamete: is quench-hadened. Eccenticity Load diamete 0.5 ig. 5 Length o a mounting hole o Eccentic Type am ollowes Eccentic callo is available o Inch seies am ollowes. Eccentic Type am ollowes, RE ae also available. I equied, please consult wih. Eccenticity d e Table 2 Eccentic collas o Inch seies am ollowes Identiical numbe o colla E E0 E E Oute diamete o colla de.0 9.52 Length o colla Eccenti city dia..0 0.0.2 9.52 0.0.700 2.700 2 0.0 5.7 5.7 0.70 d.0 9.52 E 7.50 7.50 0.70.700 E2 22.22 22.22 0.70 d unit: Applicable am ollowes R ()()(R)() R - R0 ()()(R)() R0- R ()()(R)() R 7. / R ()()(R)() R 2 R 5.7 E2.00.00 0.70 9.050 E.50.50 0.70 22.22 E.50.50.5.750 R22 R2 R2 R2 R R R R ()()(R)() ()()(R)() ()()(R)() ()()(R)() ig. eight o side ace o mounting hole ig. Reeence position o adjustment o Solid Eccentic Type am ollowes and Eccentic Type am ollowes ixing by scew om the uppe suace is ecoended o mounting o Easy Mounting Type am ollowes.see ig. The mak at the side ace o stud colla indicates the oil hole location on the aceway. You need to pay attention to this mak so that this oil hole neve gets into the loading aea when mounting it. Othewise, poduct lie may become shote.see ig. 2The vetical hole at the stud cente is used o oil eeding o as a bale. owel pin ig. Mounting examples o Solid Eccentic Type am ollowes ig. Mounting examples o Easy Mounting Type am ollowes Related Poducts (am ollowe) Ⅱ- N=0.02kg=0.22lbs. =0.097inch Ⅱ-0
Pecaution o Use ❶ Neve clean up a -Lube am ollowes with oganic solvent o white keosene with popety o emoving at. ❷ To otate the -Lube am ollowes nomally, apply load o % o moe o the basic dynamic load ating. -Lube Unit o am ollowes ❶ Identiication numbe escibed below is an example o an identiication numbe o -Lube Unit o am ollowes. ❺ Mounting Set the -Lube unit pependiculaly to a cente line o the am ollowes stud and ix it along with the am ollowes with a nut.see ig. ❻ Pecaution o use Neve clean up a -Lube unit with oganic solvent o white keosene with popety o emoving at. To avoid damage and lubication unction ailue, do not diectly apply load onto the -Lube unit. To otate the am ollowes nomally with the -Lube unit mounted, apply load o % o moe o the basic dynamic load ating to the am ollowes. Load applied to the am ollowes when the -Lube unit is mounted must be 0% o lowe o the maximum allowable static load o the am ollowes used. Excessive load will deom the -Lube unit mounting washe, which will loose the am ollowes ixing nut and shit the -Lube unit, peventing nomal opeations. eoe opeations, ensue that lubication oil is supplied between the am ollowes oute diamete suace and the cam guide suace. Lubication peomance o the -Lube unit is lagely aected by conditions o the cam guide suace. Avoid opeating the -Lube unit in any envionment whee capillay lubicating element may be damaged o oeign substances o liquid substance may ente into it. As additional oil eeding to the -Lube unit is not allowed, eplace it with new one when lubication eect is lost. Model code imension Indicate the stud diamete o am ollowes. (unit: ) L - ig. 7 Mounting o -Lube unit ❼ imension table W T ❷ Allowable numbe o otations am ollowes with -Lube unit mounted, use 0,000 o lowe as eeence o the d n value. d n value = d n Mount the -Lube unit in diection othe than the diection o loading to the am ollowes. In addition, the -Lube unit has no bale, so ix it while adjusting the -Lube unit position in mounting.see ig. t whee, d : am ollowes stud diamete n : Rotation speed min - ❸ Minimum otation angle To supply lubication oil to whole suace o the oute diamete o am ollowes, use it unde a condition whee the am ollowes is otated at least by a tun when the -Lube unit is mounted. ❹ Opeating tempeatue ange Use the -Lube unit within the tempeatue ange between - and 0. Loading ig. Loading diection o am ollowes Tighten the nut to ix the -Lube unit and am ollowes togethe to the extent not to exceed the maximum tightening toque speciied in the am ollowes dimension table. Use a lock nut, sping washe o special stop nut as necessay to pevent looseness depending on use conditions. Identiication numbe minal dimensions W T t Identiication numbe Applicable -Lube am ollowes minal dimensions L 5. 0.7..5 5 0 L 5...5.2 max L..2.5 9.2 max L 0 2 7 5.5 2 0 2.2 max L 0-2 9.2 5.5 2 0-.2 max L 2 7.5 2 5.2 max L - 22 7.5 2-5.2 max L. 27. 2. 2.5 9. max L... 2.5 0 2. max L 5...9 52. max L - 5...9-7. max te ( ) A typical identiication numbe is indicated, but is applied to all Standad Type am ollowes, Thust isk Type am ollowes, -Lube am ollowes, entalized Lubication Type am ollowes, and ylindical Rolle am ollowes o the same size. To bing out the maintenance ee eect moe eiciently, it is ecoended to use it combined with the -Lube am ollowes. Remak: Load applied to the am ollowes when the -Lube unit is mounted must be 0% o lowe o the maximum allowable static load o the am ollowes used. o the maximum allowable static load o each am ollowes, see the dimension table o each model. Related Poducts (am ollowe) Ⅱ- N=0.02kg=0.22lbs. =0.097inch Ⅱ-2
Miniatue Type am ollowes Selectable poduct speciications Mateial Rolle guide stuctue oute diamete suace R igh cabon ull complement olle ylindical owned d d S S S S diamete Identiication numbe Mass minal dimensions Mounting Re. dimensions tightening toque asic dynamic load ating asic static load ating 0 ull complement olle d Minimum g Ncm N N N 2 2.5 5 S 2 S 2 S 2.5 S 2.5 S S S S S 5 S 5 S S Remaks. oil hole is povided. 2. ease is pe-packed.. A nut is supplied with the stud. S 2 S 2 S 2.5 S 2.5 S S S S S 5 S 5 S S 0..5 2.5 2 M2 0. 2 0.7 0.9. 9. 5 2.5 M2.5 0.5 2.5.5 9.5 5 0.7 0.9..7 2 M 0.5 5.5.5 0.7. 5..5 5 M 0.7 7 5.0.5 7.7 77.7 7 0 5 M5 5 0.0 2 9. 5 7 M 9.5 2.5.2 2.5. 2 2 7 2 2 000 00 50 0 0 2 70 97 900 570 0 0 2 50 2 090 0 70 90 2 7 57 00 2 2 790 0 000 9 2 00 50 700 0 70 2 0 0 70 5 000 static allowable load 2 2 2 2 99 99 9 99 570 570 0 570 2 50 2 50 70 2 50 Related Poducts (am ollowe) N=0.02kg=0.22lbs. =0.097inch
Thust isk Type Miniatue am ollowes Selectable poduct speciications Mateial Rolle guide stuctue oute diamete suace R igh cabon ull complement olle ylindical owned d d S. W S W SW diamete Identiication numbe Mass minal dimensions Mounting Re. dimensions tightening toque asic dynamic load ating asic static load ating 0 ull complement olle d Minimum g Ncm N N N. S. W 0..7. M. 0...7 7. 0.7 0.9..0 05 2 2.5 5 S 2 W 2 2 9 0..5 2.5 2 M2 0. 2.5.5 0.7 0.9. 9. S 2 W 2 S 2.5 W 2 5 2.5 M2.5 0.5 2.5 5 0 5 0.7 0.9..7 S 2.5 W 2 2 S W 99 2 M 0.5.5.5 0.7. 5..5 S W 50 99 S W 0 0 75 5 M 0.7.0.5 7.7 77.7 S W 97 9 75 S 5 W 570 50 70 7 0 5 M5 5 9 9 0.0 2 9. 5 S 5 W 0 0 70 S W 2 090 2 0 9 7 M 0.5 22.5.2 2.5. 2 S W 70 70 70 Remaks. oil hole is povided. 2. ease is pe-packed.. A nut is supplied with the stud. static allowable load Related Poducts (am ollowe) 5 N=0.02kg=0.22lbs. =0.097inch
Standad Type am olloweswith age Selectable poduct speciications Mateial igh cabon Rolle guide ull complement olle g stuctue d d oute diamete suace R ylindical owned R500 R500 R500 R diamete d -0 R R diamete d - 2 Identiication numbe Mass minal dimensions Mounting asic dynamic asic static Re. dimensions tightening load ating load ating toque diamete 0 owned oute ylindical oute owned oute ylindical oute d g s min Minimum ing ing ing ing g Ncm N N N R R. 0 7 M 0.5 5 7 9 0.5 2 0.2. 0. 500 0 R R. 0 7 M 0.5 5 7 9 0.5 2 0.2. 0. 0 R R 7. M 0.7 9 0.5 2.5 0.. 0.7 2 070 590 R R 7. M 0.7 9 0.5 2.5 0.. 0.7 50 270 5 5 R 5 5 R 5 0. 9 5 M 7.5 0 2 0.5 0. 9.. 2 5 2 0 5 R 5 5 R 5 0. 9 5 M 7.5 0 2 0.5 0. 9.. 9 7 R R.5 M.2max 2.2max 0. 0. 2.7 0 50 R R.5 M.2max 2.2max 0. 0. 2.7 2 9 2 9 R R 2.5 9 M. 0.2max.2max 0. 0..5 0 70 R R 2.5 9 M. 0.2max.2max 0. 0..5 00 790 0 R 0 0 R 0 5 22 0 M0..2max.2max 2 0. 0.. 5 90 0 0 R 0 0 R 0 5 22 0 M0..2max.2max 2 0. 5 0.. 5 50 0- R 0-0- R 0-0 2 0 M0..2max.2max 2 0. 0.. 5 90 0-R 0-0-R 0-0 2 0 M0..2max.2max 2 0. 5 0.. 5 50 R R 95 M.5 5.2max 0.2max 0. 0. 2 2.9 7 90 R R 95 M.5 5.2max 0.2max 0. 0. 2 2.9 7 - R - - R - 05 M.5 5.2max 0.2max 0. 0. 2 2.9 7 90 -R - -R - 05 M.5 5.2max 0.2max 0. 0. 2 2.9 7 2 R R R R R R - R -R 2 R 2- R R - R -2 R - - 2 2- - -2 R R R R R R - R -R 2 R 2- R R - R -2 R - - 2 2- - -2 70 70 0 0 0 0 5 0 70 2 0 2 2 0 0 52 52 7 7 2 72 0 5 90 2 2 2 2 2 2 M.5 M.5 M.5 M.5 M.5 M.5 M.5 M.5 M2.5 M2.5 M.5 M.5 M.5 te oil hole is povided i the stud diamete d is o less. An oil hole gease eed plugis povided o the head i the stud diamete d is between 5 and 0. 2 An oil hole gease nippleis povided o the stud head and an oil hole is povided o the oute diamete and the end. This epesents the minimum toleance dimensions o the chame dimensions. Remak:. ease is pe-packed i the stud diamete d o the shield is 0 o less o i the seal stuctue is the sealed. As o the othes, gease is not pe-packed. Use the poduct with appopiate lubication. 2. A nut is supplied with the stud. 7 7 9 9 2 2 2 2 9.max 9.max 2.max 2.max.max.max.max.max.max.max 7 max 7 max 7 max 52.max 52.max 5.max 5.max.max.max.max.max 0.max 0.max 00 max 00 max 00 max.5.5.5.5 0.5 0.5 0.5 0.5 9.5 9.5 9 9 9 9 5 5 5 7 7 7 0. 0. 2 2 0 0 9 9 9 5.5 5.5.2.2 9 9 9 9 000 9 00 00 700 500 700 500 500 500 5 00 5 00 5 00 0 700 0 0 00 27 700 00 27 700 52 00 52 00 5 00 5 00 5 00 static allowable load 950 950 790 90 5 50 90 5 50 7 7 0 700 0 0 00 27 700 00 27 700 52 000 52 000 5 00 5 00 5 00 Related Poducts (am ollowe) 7 N=0.02kg=0.22lbs. =0.097inch
Standad Type am ollowesull omplement Rolle Selectable poduct speciications Mateial Rolle guide igh cabon ull complement olle g stuctue oute diamete suace R ylindical owned R500 d R500 d R500 R diamete d -0 R R diamete d - 2 Identiication numbe Mass minal dimensions Mounting asic dynamic asic static static Re. dimensions tightening load ating load ating allowable load toque diamete 0 d g s min Minimum owned ylindical owned ylindical g max max Ncm N N N R R 9 M.2 2.2 0. 0. 2.7 90 500 950 R R 9 M. 0.2.2 0. 0..5 70 0 0 0 R 0- R R - R 0 0- - 0 R 0- R R - R 0 0- - 97 07 22 2 0 0 R R 7 M.5 7 9. 52..5 0. 2 5.5 700 7 00 2 0 R R 5 0 M.5 9 2. 5..5.2 0 5 0 00 2 R - R 2 R 2- R R - R -2 R - 2 2- - -2 R - R 2 R 2- R R - R -2 R - 2 2- - -2 5 90 0 70 2 0 2 2 te An oil hole gease eed plugis povided o the stud head. 2 An oil hole gease nippleis povided o the stud head and an oil hole is povided o the oute diamete and the end. This epesents the minimum toleance dimensions o the chame dimensions. Remak:. ease is pe-packed. 2. A nut is supplied with the stud. 52 7 2 72 0 5 90 2 2 2 2 M0. M0. M.5 M.5 M.5 M.5 M2.5 M2.5 M.5 M.5 M.5 2 2.2.2 5.2 5.2.... 7 7 7.2.2 0.2 0.2.. 0. 0. 00 00 00 2 2 0.5 0.5 9.5 9.5 9 9 5 5 5 0. 0. 0. 0. 7 7 7 0. 0. 0. 0. 2 2 0 0 9 9 9.. 2.9 2.9 9 9 9 570 9 570 500 500 0 0 00 00 7 700 7 700 7 700 500 500 9 700 9 700 500 500 92 000 92 000 000 000 000 50 50 0 0 7 500 7 500 52 000 52 000 5 900 5 900 5 900 Related Poducts (am ollowe) 9 N=0.02kg=0.22lbs. =0.097inch
am ollowes Selectable poduct speciications Mateial Rolle guide igh cabon ull complement olle stuctue d extenal ing oute diamete suace R ylindical owned Identiication numbe Mass minal dimensions Mounting elated Intenal adial cleaance asic dynamic asic static (Re.) dimensions m tightening load ating load ating toque 0 Minimum d Minimum s min g max max Ncm N N N diamete 9.5 M.2 2.2 0. 0. 5 2.7 0 50 950 0.5 9 M. 0.2.2 0. 0. 5.5 0 70 0 0- - 7.5.5 95.0 05 22 2 0 0 M0. M0. M.5 M.5.2.2 5.2 5.2.2.2 0.2 0.2 75 M.5 7 9. 52..5 0. 2 0. 000 0 0 5 0 M.5 9 2. 5..5 0 9.2 00 0 0-70 00 52 7 2 2 M.5 M.5 te This epesents the minimum toleance dimensions o the chame dimensions. Remak:. Oil can not be e-ed to this beaing o stuctual easons. When oil e-eeding is necessay, use 2. ease is pe-packed. 2 2.... Standad am ollowes. 2 2 0.5 0.5 0. 0. 0. 0. 0. 0. 0. 0. 2 2 5 5 5 5 0 0.. 2.9 2.9 5 5 5 5 7 90 7 90 700 700 90 90 00 00 Static allowable Load 90 90 00 00 N0.02kg Related Poducts (am ollowe) 2 22
Thust isk Type am ollowes Selectable poduct speciications Mateial Rolle guide stuctue igh cabon ull complement olle d d g oute diamete suace R ylindical owned R500 R500 R500 WR diameted 0 WR diamete d 2 WR diamete Identiication numbe Mass minal dimensions Mounting (Re.) dimensions tightening toque asic dynamic load ating d g Minimum g Ncm N N N WR WR. 0 7 M 0.5 5 7 9 0.5 2. 0. 500 0 WR WR. 0 7 M 0.5 5 7 9 0.5 2. 0. 0 WR WR 7. M 0.7 9 0.5 2.5. 0.7 2 070 590 WR WR 7. M 0.7 9 0.5 2.5. 0.7 50 270 5 5 WR 5 WR 0. 9 5 M 5 7.5 0 2 0.5 9.. 2 5 2 0 5 WR 5 WR 0. 9 5 M 5 7.5 0 2 0.5 9.. 9 7 WR WR.5 M.2 max 2.2 max 0. 2.7 0 50 950 WR WR 2.5 9 M. 0.2 max.2 max 0..5 0 70 0 0 WR 0 WR 5 22 0 M0..2 max.2 max 2 0.. 5 90 90 0- WR 0- WR 0 2 0 M0..2 max.2 max 2 0.. 5 90 90 WR WR 95 M.5 5.2 max 0.2 max 0. 2 2.9 7 90 - WR - WR 05 M.5 5.2 max 0.2 max 0. 2 2.9 7 90 WR WR 70 M.5 7 9. max 52. max.5 2 5.5 000 0 0 WR WR 0 0 M.5 9 2. max 5. max.5.2 00 0 0 WR WR 0 52 2 M.5 2. max. max 0.5 9 9 700 00 00 - WR - WR 7 2 M.5 2. max. max 0.5 9 9 700 00 00 te oil hole is povided i the stud diamete d is o less. An oil hole gease eed plugis povided o the head i the stud diamete d is between 5 and 0. 2 An oil hole gease nippleis povided o the stud head and an oil hole is povided o the oute diamete and the end. Remak:. ease is pe-packed i the stud diamete d o the shield is 0 o less o i the seal stuctue is the sealed. As o the othes, gease is not pe-packed. Use the poduct with appopiate lubication. 2. A nut is supplied with the stud. asic static load ating 0 static allowable load Related Poducts (am ollowe) 2 N=0.02kg=0.22lbs. =0.097inch 2
-Lube am ollowes Selectable poduct speciications Mateial Rolle guide stuctue igh cabon ull complement olle d oute diamete suace R ylindical owned R500 diamete Identiication numbe Mass minal dimensions Mounting Re. dimensions tightening toque asic dynamic load ating asic static load ating 0 d Minimum g Ncm N N N 5 5 WR/S 0. 9 5 M 5 7.5 0 2 0.5 9.. 2 5 2 0 WR/S.5 M.2 max 2.2 max 0. 2.7 0 50 950 WR/S 2.5 9 M. 0.2 max.2 max 0..5 0 70 0 0 WR/S 0- WR/S WR/S - WR/S 5 0 95 05 22 2 0 0 M0. M0. M.5 M.5.2 max.2 max 5.2 max 5.2 max.2 max.2 max 0.2 max 0.2 max WR/S 70 M.5 7 9. max 52. max.5 2 5.5 000 0 0 WR/S 0 0 M.5 9 2. max 5. max.5.2 00 0 0 WR/S - WR/S Remak:. oil hole is povided. 2. A nut is supplied with the stud. 0 52 7 2 2 M.5 M.5 2 2. max. max. max. max 2 2 0.5 0.5 0. 0. 0. 0. 2 2.. 2.9 2.9 9 9 5 5 7 90 7 90 700 700 90 90 00 00 static allowable load 90 90 00 00 Related Poducts (am ollowe) N=0.02kg=0.22lbs. =0.097inch 2
Solid Eccentic Type am ollowes Selectable poduct speciications Mateial Rolle guide igh cabon ull complement olle εeccenticity g εeccenticity stuctue oute diamete suace R ylindical owned R500 d R500 d R500 ESR diamete d 0 ESR ES ESR ES diamete d 2 Identiication numbe Mass minal dimensions Mounting asic asic static Re. Eccenticity dimensions tightening dynamic load ating static toque load ating diamete 0 allowable load d g s min e Minimum owned ylindical owned ylindical g max max Ncm N N N ES R ES ES R ES.5 M.2 2.2 0. 0. 0. 2.7 0 50 90 ES R ES ES R ES 2.5 9 M. 0.2.2 0. 0. 0..5 0 70 70 0 ES 0 R ES 0- R ES R ES - R ES 0 ES 0- ES ES - ES 0 R ES 0- R ES R ES - R ES 0 ES 0- ES ES - 5 0 95 05 22 2 0 0 ES R ES ES R ES 70 M.5 7 9. 52..5 0. 0.5 2 5.5 000 0 0 ES R ES ES R ES 0 0 M.5 9 2. 5..5 0..2 00 0 0 te An oil hole gease eed plugis povided o the stud head. 2 An oil hole gease nippleis povided o the stud head and an oil hole is povided o the oute diamete and the end. This epesents the minimum toleance dimensions o the chame dimensions. Remak:. ease is pe-packed i the stud diamete d o the shield is 0 o less o i the seal stuctue is the sealed. As o the othes, gease is not pe-packed. Use the poduct with appopiate lubication. 2. A nut is supplied with the stud. M0. M0. M.5 M.5.2.2 5.2 5.2.2.2 0.2 0.2 2 2 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 2 2.. 2.9 2.9 5 5 7 90 7 90 90 90 90 90 Related Poducts (am ollowe) 27 N=0.02kg=0.22lbs. =0.097inch 2
Eccentic Type am olloweswith age Selectable poduct speciications Mateial Rolle guide stuctue oute diamete suace R igh cabon ull complement olle ylindical owned R500 d e εeccenticity R500 g d e εeccenticity R500 ER Eccentic colla diamete d e 9 ER E ER E Eccentic colla diamete d e 2 Eccentic colla oute diamete Identiication numbe Mass minal dimensions Mounting Re. Eccenticity dimensions d e g s min e Minimum owned ylindical owned ylindical g max max Ncm N N N 9 E R E E R E.5 9 M 7.5.2 2.2 0..5 0. 0. 2.7 0 50 950 E R E E R E 9 M. 9.5.2.2 0. 0.5 0. 0..5 0 70 E 0 R E 0 E 0 R E 0 9.5 22 M0. 0.5.2.2 2 0..5 0. 0.. 5 90 90 E 0- R E 0- E 0- R E 0-5 2 M0. 0.5.2.2 2 0..5 0. 0.. 5 90 90 E R E E R E 05 M.5.5 5.2 0.2 0..5 0. 2 2.9 7 90 E - R E - E - R E - 5 M.5.5 5.2 0.2 0..5 0. 2 2.9 7 90 22 E R E E R E 90 22 M.5 5.5 9. 52..5 7 0. 2 5.5 000 0 0 2 E R E E R E 20 0 2 M.5 7.5 2. 5..5 9.2 00 0 0 27 E R E E R E 500 52 2 27 M.5 9.5.. 0.5 2 9 700 00 00 E - R E - E - R E - 7 2 27 M.5 9.5.. 0.5 2 9 700 00 00 E 2 R E 2 E 2 R E 2 95 2 M2.5.5. 0. 9.5 2 0 500 52 00 52 000 E 2- R E 2- E 2- R E 2-2 72 M2.5.5. 0. 9.5 2 0 500 52 00 52 000 E R E E R E 2 0 0 M.5.5 7 00.5 7.5 9 5 00 5 00 5 00 E - R E -2 R E - E -2 E - R E -2 R E - E -2 2 90 2 0 5 90 M.5 M.5.5.5 7 7 00 00.5.5 7 7.5.5 9 9 5 00 5 00 5 00 5 00 5 00 5 00 te An oil hole gease eed plugis povided o the stud head. 2 An oil hole gease nippleis povided o the stud head and an oil hole is povided o the oute diamete and the end. This epesents the minimum toleance dimensions o the chame dimensions. Remak:. ease is pe-packed i the stud scew diamete o the shield is 0 o less o i the seal stuctue is the sealed. As o the othes, gease is not pe-packed. Use the poduct with appopiate lubication. 2. A nut is supplied with the stud. tightening toque asic dynamic load ating asic static load ating 0 static allowable load Related Poducts (am ollowe) N=0.02kg=0.22lbs. =0.097inch 270
Eccentic Type am ollowesull omplement Rolle Selectable poduct speciications Mateial Rolle guide igh cabon ull complement olle εeccenticity g εeccenticity stuctue oute diamete suace R ylindical owned R500 d e R500 d e R500 ER Eccentic colla diamete d e 9 ER E ER E Eccentic colla diamete d e 2 Eccentic colla oute diamete Identiication numbe Mass minal dimensions Mounting Re. Eccenticity dimensions d e g e Minimum owned ylindical owned ylindical s min g max max Ncm N N N 9 E R E E R E 2 9 M 7.5.2 2.2 0..5 0. 0. 2.7 90 500 950 E R E E R E.5 9 M. 9.5.2.2 0. 0.5 0. 0..5 70 0 E 0 R E 0- R E R E - R E 0 E 0- E E - E 0 R E 0- R E R E - R E 0 E 0- E E - 50.5 07 7 22 2 22 E R E E R E 9 22 M.5 5.5 9. 52..5 7 0. 2 5.5 700 7 00 2 0 2 E R E E R E 25 0 2 M.5 7.5 2. 5..5 9.2 0 5 0 00 27 E R E - R E 2 R E 2- R E R E - R E -2 R E E - E 2 E 2- E E - E -2 E R E - R E 2 R E 2- R E R E - R E -2 R E E - E 2 E 2- E E - E -2 505 900 2 2 0 2 90 2 0 te An oil hole gease eed plugis povided o the stud head. 2 An oil hole gease nippleis povided o the stud head and an oil hole is povided o the oute diamete and the end. This epesents the minimum toleance dimensions o the chame dimensions. Remak:. ease is pe-packed. 2. A nut is supplied with the stud. 52 7 2 72 0 5 90 2 2 27 27 M0. M0. M.5 M.5 M.5 M.5 M2.5 M2.5 M.5 M.5 M.5 0.5 0.5.5.5 9.5 9.5.5.5.5.5.5.2.2 5.2 5.2.... 7 7 7.2.2 0.2 0.2.. 0. 0. 00 00 00 2 2 0.5 0.5 9.5 9.5 0. 0. 0. 0..5.5.5.5 2 2 2 2.5.5.5 7 7 7 0. 0. 0. 0. 0. 0. 0. 0..5.5.5 2 2 0 0 9 9 9 tightening toque.. 2.9 2.9 9 9 asic dynamic load ating 9 570 9 570 500 500 0 0 00 00 7 700 7 700 7 700 asic static load ating 0 500 500 9 700 9 700 500 500 92 000 92 000 000 000 000 static allowable load 50 50 0 0 7 500 7 500 52 000 52 000 5 900 5 900 5 900 Related Poducts (am ollowe) 27 N=0.02kg=0.22lbs. =0.097inch 272
entalized Lubication Type am ollowes Selectable poduct speciications Mateial Rolle guide stuctue oute diamete suace U RU igh cabon ull complement olle ylindical owned M R500 d M2 -RU -U diamete Identiication numbe Mass minal dimensions Mounting Re. dimensions owned ylindical d M M 2 Minimum s min g max max Ncm N N N -RU- -U-.5 M.2 2.2 0. M 0.75 tightening toque asic dynamic load ating asic static load ating 0 static allowable load 0. 2.7 0 50 950 -RU- -U- 2.5 9 M. 0.2.2 0. 0..5 0 70 0 -RU-0 -RU-0- -RU- -RU-- -U-0 -U-0- -U- -U-- 5 0 95 05 22 2 0 0 M0. M0. M.5 M.5 -RU- -U- 70 M.5 7 9. 52..5 0. 2 5.5 000 0 0 -RU- -U- 0 0 M.5 9 2. 5..5.2 00 0 0 2 -RU- -RU-- -RU-2 -RU-2- -RU- -RU-- -RU--2 -U- -U-- -U-2 -U-2- -U- -U-- -U--2 0 5 0 70 2 0 2 2 52 7 2 72 0 5 90 2 2 2 2 M.5 M.5 M2.5 M2.5 M.5 M.5 M.5 te This epesents the minimum toleance dimensions o the chame dimensions. Remaks. A tap hole o piping is povided only o the stud head i the stud diamete d is o less. As o the othes, a tap hole o piping is povided o the stud head and the end. 2. ease is pe-packed.. A nut is supplied with the stud. 2 2.2.2 5.2 5.2.... 7 7 7.2.2 0.2 0.2.. 0. 0. 00 00 00 2 2 0.5 0.5 9.5 9.5 9 9 5 5 5 0. 0. 0. 0. PT / PT / 0. 0. 0. 0. 2 2 0 0 9 9 9.. 2.9 2.9 9.0 9 5 5 7 90 7 90 700 700 500 500 5 00 5 00 5 00 90 90 00 00 52 00 52 00 5 00 5 00 5 00 90 90 00 00 52 000 52 000 5 00 5 00 5 00 Related Poducts (am ollowe) 27 N=0.02kg=0.22lbs. =0.097inch 27
Easy Mounting Type am ollowes Selectable poduct speciications Mateial igh cabon L L 2 L L 2 h t Rolle guide stuctue oute diamete suace ull complement olle ylindical e 90 d e 90 d diamete d 0 diamete d 2 diamete Identiication numbe Mass Re. minal dimensions Mounting dimensions asic dynamic load ating d L L 2 e s min 2 t h g max max Toleance Minimum Minimum Re. N N N -SU- 9.5.2 9. 0. 5 0 0. 0. 0 -SU- 9 9.2 9. 0. 5 0 0.5 0. -SU- 0 -SU- 0- -SU- -SU- - 59 9 0 22 2 0 0.2.2 5.2 5.2 9. 9. 9. 9. 0. 0. 0. 0. 5 5 5 5 0 0 0 0 0.5 0.5 0. 0. 0. 0. 0 0 0.0 0 0.05 0 asic static load ating 0 static allowable load 0 0 50 950 0 0 70 0.0 -SU- 9..5 2.9 0 0 0. 0 2 5 000 0 0 -SU- 0 2..5 2.9 0 0 5 00 0 0 -SU- -SU- - te An oil hole gease eed plugis povided o the stud head. 2 An oil hole gease nippleis povided o the stud head. This epesents the minimum toleance dimensions o the chame dimensions. Remak: ease is pe-packed. 52 7 2 2.. 50.5 50.5 2.9 2.9 0 0 0 0 0.02 0 2 2 0 0 0 0 5 5 5 5 7 90 7 90 700 700 90 90 00 00 90 90 00 00 Related Poducts (am ollowe) 275 N=0.02kg=0.22lbs. =0.097inch 27
ylindical Rolle am ollowes Selectable poduct speciications Mateial Rolle guide stuctue oute diamete suace R igh cabon ull complement olle ylindical owned R500 d R500 d g diamete d 0 diamete d 2 diamete Identiication numbe Mass minal dimensions Mounting Re. dimensions tightening toque asic dynamic load ating asic static load ating 0 d g Minimum g max max Ncm N N N 0 NU 0 R NU 0- R NU R NU - R 5 97 22 2 0 0 M0. M0. M.5 M.5.2.2 5.2 5.2.2.2 0.2 0.2 2 2 NU R 7 M.5 7 9. 52..5 5.5 2 00 27 0 00 NU R 2 0 M.5 9 2. 5..5 22.2 0 900 0 2 NU R NU - R NU 2 R NU 2- R NU R NU -2 R 57 79 0 00 970 52 7 2 72 0 90 2 2 2 2 M.5 M.5 M2.5 M2.5 M.5 M.5 2 2.... 7 7 te An oil hole gease eed plugis povided o the stud head. 2 An oil hole gease nippleis povided o the stud head and an oil hole is povided o the oute diamete and the end. Remak:. ease is pe-packed. 2. A nut is supplied with the stud... 0. 0. 00 00 0.5 0.5 9.5 9.5 9 9 5 5 0. 0. 0. 0. 7 7 7 7 27 5 5.. 2.9 2.9 9 9 0 00 0 00 000 000 00 900 5 0 900 90 0 90 0 500 500 00 00 5 00 9 000 75 0 00 000 000 static allowable load 5 0 9 5 50 9 00 000 27 0 0 57 000 9 0 9 0 Related Poducts (am ollowe) 277 N=0.02kg=0.22lbs. =0.097inch 27
Inch Seies am ollowes RWith agewith exagon ole Selectable poduct speciications Mateial Rolle guide igh cabon ull complement olle g stuctue d oute diamete suace R ylindical owned R500 2 R500 RR R RR R diamete inch.2.0 9.5..700 2 5.75 9.050 22.2 owned R R R - R R 0 R R 0- R R R R R R R R R R R R 22 R R 2 R R 2 R R 2 R R R R R R R Identiication numbe Mass Re. minal dimensions inch Mounting dimensions ylindical R R - R 0 R 0- R R R R R R 22 R 2 R 2 R 2 R R R owned R R R - R R 0 R R 0- R R R R R R R R R R R R 22 R R 2 R R 2 R R 2 R R R R R R R ylindica R R - R 0 R 0- R R R R R R 22 R 2 R 2 R 2 R R R d g Minimum g UN max inch Ncm N N 9 0 9 2 7 57 2 0 5 750.700 2.700 2 5.7 5.7 9.050 22.22.00 2.57.750.92.00.27 2.50 7.2 5002 57.502.7.52 0.9..700 2.700 2 5.7 5.7 9.050 9.050 22.22 22.22.00.00.750.750.2.2.0.0 9.52 9.52...700 2.700 2 5.7 5.7 9.050 9.050 22.22 22.22.0-.0- - 2-2 - 2-2 - - 2-2 - - - - - - -.0.0 7.9 7.9 9.52 9.52.700 2.700 2 5.7 5.7 9.050 9.050 22.22 22.22.00.00 Remaks. oil hole is povided i the stud diamete d is. o less. As o the othes, an oil hole is povided o the oute diamete and the end o the stud. 2. ease is pe-packed.. ontact o the inomation on the maximum static allowable load.. A nut is supplied with the stud. 0..0 0.90..0..0.9..5..5 7. 7..0.0 2.0.9 2.0.9 2..0 2..0.....700 2 5.7 5.7 9.050 22.22 22.22.00.00.750.750.00 2.00 2.50.50 5002 5002.0.0.0.0 7.9 7.9 9.52 9.52...700 2 2.700 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79.72.72.72.72.72.72.72.72.72.72.72.72 2. 2..7.7.7.7.99.99.99.99.72.72.7.7.7.7.72.72.0.0.0.0 7.9 7.9 7.9 7.9.. 0.9 0.9 0.9 0.9 0.79 0.79.9.5.5.5.5.5.5.5.5.5 2. 2..509.509.9 9 5.0 7.59 9.050 5 2.2 5 2.2 2.9 2.9 9.5 9.5 7. 7. tightening toque.... 7. 7. 27.7 27.7 55.7 55.7 00 00 2 2 asic dynamic load ating 2 5 2 5 50 50 790 0 9 0 0 0 00 900 00 00 500 500 asic static load ating 0 2 0 2 0 70 70 5 0 5 0 0 00 00 000 000 2 0 2 0 0 0 900 900 Related Poducts (am ollowe) 279 N=0.02kg=0.22lbs. =0.097inch 20