Modular contactors for installation into distribution boards Modular contactors for installation into distribution boards Modular contactor for installation into distribution board Description Modular contactors are used for installation in consumer units in dwellings, business premises, hotels, hospitals, shopping centres, sport centers, production halls, warehouses etc. They are used for remote switching and automatic control of electric devices and equipment, such as: lightning all types of pumps air-conditioning electric heating single-phase and three-phase motors They excel in silent operation, long mechanical life time and high quality. The contactors are designed for mounting on mm mounting rail in accordance with the EN 0 standard and they can be leaded by means of lead covers. The auxiliary contact block is available for signalization and ventilation module is available for preventing exceeded heating when contactors are used side-by-side. All contactors have degree of protection IP0. Besides the basic AC controlled types R0, R, R0 and R, types with increased silent operation RD0, RD, RD0 and RD are available. Due to DC magnet and rectifier enable DC and AC voltage control. Surge arrestor is built in for over voltage protection. s R0-R, RD0-R, R-R and RD-R are upgraded versions of basic types of modular contactors. Besides basic functions they enable manual control with a handle. Description of the handle positions: A: the contactor functions as an installation contactor without manual control O: permanently OFF I: manual shifting the handle from position A to I causes the contactor to close; when control voltage is applied, the handle is automatically set to position A. s RD0-R and RD-R are provided with a varistor for over voltage protection and a rectifier, which enables control with AC and DC voltage. Contactors with manual control enable: switching depending on tariff (selection of the most convenient tariff) switching when control voltage is not applied Technical specifications according to: EN09--; EN09--; VDE 00, IEC 9--; IEC 9--
Modular contactors for installation into distribution boards - type R -pole, module (, mm), 0 A (AC, 00 V) R 0-0 0V 000 0 R 0-0 V 00 0 R 0-0 V 000 0 R 0- V 00 0 R 0-0 0 V 000 0 R 0-0 V 00 0 -pole, module (, mm), A (AC, 00 V) R -0-V 000 A 0 R -0-0V 0000 A 0 -pole, module (, mm), A (AC, 00 V) R -0-V 000 A 0 R -0 0V 000 A 0 R - V 000 A 0 R - 0V 000 A R 0 R -0 V 000 A R 0 R -0 0V 000 A R R 0 -pole, modules ( mm), A (AC, 00 V) R -0 0 V 000 0 R -0 V 00 0 R - 0 V 000 0 R - V 00 0 R - 0 V 000 0 R - V 00 0 R - 0 V 000 0 R - V 00 0 R -0 0 V 000 0 R -0 V 00 0 is used where ambient temperature is higher than 0 C. Piece width is / module (, mm) Max contactors can be side by side - use of distance piece P0 is highly recommended. Technical data on page 0
Modular contactors for installation into distribution boards - type R -pole, modules (, mm), 0 A (AC, 00 V) R 0-0 0 V 000 0 R 0-0 V 00 0 R 0-0 V 000 0 R 0- V 00 0 R 0-0 V 000 0 R 0- V 00 0 R 0-0 0 V 000 0 R 0-0 V 00 0 pole, modules (,mm), A(AC, 00 V) R -0 0 V 000 0 R -0 V 00 0 R - 0 V 000 0 R - V 00 0 R - 0 V 000 0 R - V 00 0 R -0 0 V 000 0 R -0 V 00 0 Auxiliary contactor block for contactors R, R0, R (max. piece) RH 000 Leaded cover For use with P 000 R 0 P90 000 R 0, R 0 For use with P0 000 R0-R 0 is used where ambient temperature is higher than 0 C. Piece width is / module (, mm) Max contactors can be side by side - use of distance piece is highly recommended. Technical data on page 0
Modular contactors for installation into distribution boards - type RD, R...R, RD...R -pole, module (, mm), 0 A (AC, 0 V) RD 0-0-0V AC/DC 00000 RD 0-0-V AC/DC 0000 RD 0-0-0V AC/DC 0000 R RD 0-0-V AC/DC 0000 R 0 0 0 0 RD 0-0-0V AC/DC 0000 RD 0-0-V AC/DC 0000 RD 0--0V AC/DC 0000 RD 0--V AC/DC 0000 RD 0-0-0V AC/DC 0000 A A R R -pole, module (, mm), 0 A (AC, 0 V) R R RD 0-0-V AC/DC 00009 Take care of dissipated heat by: 0 C max. modules side by side 0 - C max. modules side by side. -pole, modules ( mm), A (AC, 00 V) RD -0-0V AC/DC 0000 RD -0-V AC/DC 000 RD --0V AC/DC 000 R RD --V AC/DC 000 R RD --0V AC/DC 000 R RD --V AC/DC 000 R R RD -0-0V AC/DC 000 R R R R R R RD -0-V AC/DC 000 Take care of dissipated heat by: 0 C max. modules side by side 0 - C max. modules side by side. R 0 0 0 -pole, modules (, mm), 0 A (AC, 00 V) RD 0-0-0V AC/DC 000 RD 0-0-V AC/DC 0009 RD 0--0V AC/DC 0000 R RD 0--V AC/DC 000 R RD 0--0V AC/DC 000 R RD 0--V AC/DC 000 R R RD 0-0-0V AC/DC 000 R R RD 0-0-V AC/DC 000 R R R Take care of dissipated heat by: 0 C max. modules side by side 0 - C max. modules side by side. R R pole, modules (,mm), A(AC, 00 V) RD -0-0V AC/DC 000 RD -0-V AC/DC 000 RD --0V AC/DC 000 R RD --V AC/DC 0009 R RD --0V AC/DC 0000 R RD --V AC/DC 000 Take care of dissipated heat by: 0 C max. modules side by side 0 - C max. modules side by side. Technical data on page 0 R R 9
Modular contactors for installation into distribution boards - type RD, R...R, RD...R -pole, ON - OFF - AUTO, module (, mm), 0 A (AC, 00 V) R 0-0-R-0V AC 000 R 0-0-R-V AC 000 RD 0-0-R-0V AC/DC 000 RD 0-0-R-V AC/DC 000 R 0-0-R-0V AC 000 R 0-0-R-V AC 000 RD 0-0-R-0V AC/DC 000 0 0 RD 0-0-R-V AC/DC 0009 -pole, ON - OFF - AUTO, module (, mm), 0 A (AC, 00 V) R 0-0-R-0V AC 0000 R 0-0-R-V AC 000 RD 0-0-R-0V AC/DC 000 RD 0-0-R-V AC/DC 000 R 0--R-0V AC 000 R 0--R-V AC 000 RD 0--R-0V AC/DC 000 RD 0--R-V AC/DC 000 R 0-0-R-0V AC 000 R 0-0-R-V AC 0009 RD 0-0-R-0V AC/DC 0000 RD 0-0-R-V AC/DC 000 Take care of dissipated heat by: 0 C max. modules side by side 0 - C max. modules side by side. R R R R R R 0 0 -pole, ON - OFF - AUTO, modules ( mm), A (AC, 00 V) R -0-R-0V AC 000 R -0-R-V AC 000 RD -0-R-0V AC/DC 000 RD -0-R-V AC/DC 000 R --R-0V AC 000 R --R-V AC 000 RD --R-0V AC/DC 000 RD --R-V AC/DC 0009 R --R-0V AC 0000 R --R-V AC 000 RD --R-0V AC/DC 000 RD --R-V AC/DC 000 R -0-R-0V AC 000 R -0-R-V AC 000 RD -0-R-0V AC/DC 000 RD -0-R-V AC/DC 000 Take care of dissipated heat by: 0 C max. modules side by side 0 - C max. modules side by side. R R R R R R R R R R R R 0 0 Technical data on page 0
Modular contactors for installation into distribution boards - type RD, R...R, RD...R Auxiliary contactor block for contactors RD, R R, RD R RN-0 000 0 RN-0 0009 0 RN- 0000 * The auxiliary switch should not be applied in combination with RD0 and RD0-R. 0 Sealing cover For use with SC0 000 RD 0, R0...R SC 000 RD, R...R SC0/ 000 RD 0, RD 0 For use with IKV 000 RD, R...R Technical data on page 0