End of Life September 018 - Alternative Device: MMKP8 Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Material categorization: for definitions of compliance please see /doc?9991 APPLICATIONS High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction and fly-back tuning). Protection circuits in SMPS s. Snubber and electronic ballast circuits. Input and output filtering in SPS designs, storage, timing and integrating circuits. QUICK REFERENCE DATA Capacitance range pf to 0.68 μf Capacitance tolerances ± 0 % (M), ± % (K), ± % (J) Climatic testing class according to IEC 60068 /0/6 Dielectric Polypropylene film Electrodes Vacuum deposited aluminum Construction Extended double-sided metallized polyester film, internal series connection, single-sided metallized polypropylene film (refer to general information) Coating Flame retardant plastic case (UL-class 94 V-0), blue, epoxy resin sealed Leads Tinned wire Marking Manufacturer s logo / type / C-value / rated voltage / tolerance / date of manufacture Operating temperature range - C to +0 C Rated DC voltages (U R ) 60 V DC, V DC, 1600 V DC, 000 V DC Permissible AC voltages (RMS) up to 60 Hz 400 V AC, 600 V AC, 60 V AC, 00 V AC Test voltage (electrode/electrode) 1.6 x U R for s Measured at 0 V DC after one minute Insulation resistance For C 0. μf: 0 000 M minimum value Measured at 0 V DC after one minute Time constant For C > 0. μf: 0 000 s minimum value Temperature coefficient -0 x -6 / C (typical value) Capacitance drift Up to + 40 C, ± 0. % for a period of two years Derating for DC and AC category voltage U C At +8 C: U C = 1.0 U R At +0 C: U C = 0. U R Self inductance ~ 6 nh measured with mm long leads Pull test on leads 0 N in direction of leads according to IEC 60068--1 Reliability Operational life > 00 000 h Failure rate < FIT (40 C and 0. x U R ) MEASURED AT C μf μf < C 1.0 μf 1 khz 0. x - 0. x - Dissipation factor tan khz 0.4 x - 0.4 x - 0 khz 1. x - - Maximum values For further details, please refer to the general information available at /doc?60 MAXIMUM PULSE RISE TIME MAXIMUM PULSE RISE TIME dv/dt (V/μs) 60 V DC V DC 1600 V DC 000 V DC 1 40 6600 11 0 -. 800 800 600. 14 000 680 400. 980 180 1690 600 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted Revision: 0-Mar-18 1 Document Number: 600 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
End of Life September 018 - Alternative Device: MMKP8 DIMENSIONS in millimeters L W Marking 0.6 H ± 0.4 6.0-1 ± 0.4 Ø d W Ø d < 16.0 0.8 16.0 1.0 ELECTRICAL DATA U RDC (V) 60 CAP. (μf) CAPACITANCE VOLTAGE V AC DIMENSIONS w x h x l 0.0068-68. x. x 18.0 1 0.0 -. x. x 18.0 1-1 6. x 1. x 18.0 1 0.0 -. x 1. x 18.0 1 0.0-8. x 14. x 18.0 1 0.04-4. x 1. x 6.. 0.068-68 6 400 8. x 16. x 6.. 0. -4. x 18. x 6.. -41 11. x 0. x 1.. 0. -4 1. x. x 1.. 0. -4 1.0 x 4. x 1.. 0.4-44 14. x 4. x 41.. 0.68-468 18.0 x. x 41.. 0.00 -. x. x 18.0 1 0.004-4. x. x 18.0 1 0.0068-68 6. x 1. x 18.0 1 0.0-6. x 14. x 6.. -1 6. x 14. x 6.. 0.0-6. x 14. x 6.. 600 0.0 -. x 1. x 6.. 0.04-4. x 18. x 6.. 0.068-68 11.0 x 1.0 x 6.. 0. -4 11. x 0. x 1.. -41 1. x. x 1.. 0. -4 16. x 9. x 1.. Revision: 0-Mar-18 Document Number: 600 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
End of Life September 018 - Alternative Device: MMKP8 ELECTRICAL DATA U RDC (V) 1600 000 CAP. (μf) 0.00 -. x. x 18.0 1 0.001-1. x. x 18.0 1 0.00 -. x. x 18.0 1 0.00-6. x 1. x 18.0 1 0.004-4. x 1. x 18.0 1 0.0068-68 8. x 14. x 18.0 1 0.0-6. x 14. x 6.. -1 1 60. x 1. x 6.. 0.0-8. x 16. x 6.. 0.0 -. x 18. x 6.. 0.04-4 11. x 0. x 1.. 0.068-68 11. x 0. x 1.. 0. -4 1.0 x 4. x 1.. -41 14. x 4. x 41.. 0. -4 16.0 x 8. x 41.. 0.00-6. x 14. x 6.. 0.001-1 6. x 14. x 6.. 0.00-6. x 14. x 6.. 0.00-6. x 14. x 6.. 0.004-4 6. x 14. x 6.. 0.0068-68. x 1. x 6.. 0.0-0 00 8. x 16. x 6.. -1. x 18. x 6.. 0.0-11. x 0. x 1.. 0.0-1. x. x 1.. 0.04-4 1.0 x 4. x 1.. 0.068-68 16. x 9. x 1.. 0. -4 16.0 x 8. x 41.. (1) Further C-values upon request. CAPACITANCE VOLTAGE V AC DIMENSIONS w x h x l RECOMMENDED PACKAGING LETTER TYPE OF PACKAGING HEIGHT (H) (1) S = box size mm x mm x 40 mm (W x H x L) L = box size 60 mm x 60 mm x mm (W x H x L) REEL DIAMETER ORDERING EXAMPLES 1. TO. D Ammo 16. S (1) -/6-D X - - G Ammo 18. S (1) -/6-G X - - F Reel 16. 0 -/6-F X - - W Reel 18. 0 -/6-W X - - V Reel 18. 00-4/-V X X - G Ammo 18. L (1) -4/-G - X - - Bulk - - -4-1 X X X. Revision: 0-Mar-18 Document Number: 600 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
End of Life September 018 - Alternative Device: MMKP8 6800 0.0 0.068 00 400 0 60 V DC 4 6 0. 0.68 0. 0.0 0.04 0 V DC 4 6 00 00 400 0.0 0.04 0. 0 1600 V DC 4 6 400 0.0 0.04 0 1600 V DC 4 6 Revision: 0-Mar-18 4 Document Number: 600 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 01 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-1 1 Document Number: 9