Chapter-3 Petrography of Basement samples
|
|
- Virginia Arnold
- 5 years ago
- Views:
Transcription
1 Chapter-3 Petrography of Basement samples 3.1 Introduction Petrographic characters of the rock reflect its chemical composition and cooling history. To obtain an authentic petrogenetic model, detailed petrographical, mineralogical and textural studies on carefully chosen rock samples are necessary. The overall mineralogy and texture of rock gives an insight into the nature, composition and to a great extent, the processes involved during magmatic crystallization. For the present study, we have chosen forty three basement cores from KLR-1 borehole, which vary in depth range from m to m as stated earlier. In hand specimen, these rocks range in color from dark to light grey, few of them showing secondary quartz and calcite veins. For each rock samples, one to three thin sections were prepared and studied using optical microscope to decipher detailed textural, mineralogical and deformational characters. Based on detailed geochemical data and Total Alkali Silica (TAS) diagram (as discussed later), theses samples are divided into three groups: basic, Intermediate and acid, which contain 6, 27 and 10 samples respectively. Petrographical character of each sample is discussed below. 3.2 Petrography Basic group Basic group of rocks includes six samples as discussed earlier. This group is mainly made up of medium to coarse grain holocrystalline rock which dominantly contains ferromagnesian minerals such as amphibole, biotite, clinopyroxene, relict orthopyroxene, plagioclase and quartz which occur as major constituents. Secondary alteration products and accessory opaques are also present as clusters, represented mainly by magnetite and minor pyrite. 23
2 KIL-34, KIL-35 and KIL -37: Coarse to medium grained schistose amphibolite rock which contains plagioclase feldspar, hornblende, biotite, quartz as major constituent and titanite, apatite as accessory. Most of the feldspar grains are sausurritized (Fig.3.1a) and sericitized. Boundaries of the feldspar and amphibole grains are curved. Chloritization (Fig.3.1b) and sausurritization suggest hydrothermal alteration during the course of retrogression. KIL-39: Medium grained basic rock which contains hornblende, plagioclase, quartz and biotite as major mineral and opaque (magnetite), epidote, titanite, present as accessories (Fig 3.1c). Uralatisation and saussuritization are also clearly seen. In these samples, two phases of rocks can be observed, one portion is quartzofeldspathic rich and the other, rich in ferromagnesian minerals. KIL-41: Coarse grained amphibolite rock constituting plagioclase feldspar, biotite, hornblende and quartz as major minerals. Here also, cluster of opaque minerals (mainly magnetite) (Figs.3.1d, e) can be seen at the contacts of titanite and hornblende (Fig.3.1f). Myrmekite texture (quartz-plagioclase intergrowth) is also present at the contact of K-feldspar and plagioclase. Majority of the plagioclase grains are sausuritized. KIL-46: Medium grained amphibolite rock, which is mainly composed of biotite, hornblende, plagioclase, quartz and clusters of opaque. Segregation of opaques are noticed here Intermediate group This group consists twenty seven samples, mainly containing hornblende, plagioclase, biotite, clinopyroxene, orthopyroxene (minor), quartz and k-feldspar as major constituents and titanite, opaques, apatite, chalcopyrite as accessories. This group indicate maximum variation in litho-units, containing three types of rocks, mainly amphibolite but also granulite, tonalite and granodiorite. 24
3 Fig.3.1 Photomicrographs taken from the thin sections showing sausuritized plagioclase and hornblende in KIL-34 (Fig.a), process of chloritization in KIL-34 (Fig.b), hornblende, opaque and plagioclase in KIL-39 (Fig.c), opaque and biotite in KIL-41 (Fig.d), hornblende, plagioclase, and opaques in KIL-41 (Fig.e), reaction between opaques, titanite and amphibole in KIL-41 (Fig.f). Hbl: Hornblende, Plg: Plagioclase, Bt: Biotite, Chl: Chlorite, Tnt: Titanite, Opq: Opaque 25
4 KIL-1: A medium grained plagioclase dominated amphibolite rock containing hornblende, clinopyroxene, k-feldspar, biotite, epidote as major constituents and titanite, ilmenite as accessories. Saussuritized and sericitized plagioclase grains are also seen which are altered to, sericite (Fig.3.2a) and muscovite (Fig.3.2b), exhibiting hydrothermal alteration during the course of retrogression. Clinopyroxene grains appear to be marginally replaced by hornblende showing uralitisation (Fig. 3.2c). Antiperthite texture which is also one of the characteristic features of granulite facies metamorphism (particularly in charnockitic roks), can also be seen here (Fig. 3.2d). It could have been developed both by exsolution and replacement during active deformation and shifting from higher P and T to lower P and T conditions. This rock contains abundant inclusions of ilmenite in brown hornblende (Fig.3.2e) as well as titanite (Fig. 3.2f), latter indicating possible reversal in P&T conditions. Recrystallized and curved boundary showing shearing of biotite with released iron oxide, can also be clearly seen in the sample (Fig.3.3a). KIL-2: Medium grained plagioclase dominated amphibolite rock, which exhibit similar characteristics as KIL-1. It consists large grains of saussuritized plagioclase megacryst (Fig. 3.3b) and deformed quartz. KIL-3: A medium grained amphibolite rock containing plagioclase, hornblende, biotite, k- feldspar, quartz and epidote as major minerals and titanite as accessory. Opaques such as ilmenite, pyrite and chalcopyrite are also present in minor quantities, which are usually associated with medium to high grade amphibolites. KIL-8: It is deformed and medium grained amphibolite rock, containing hornblende, clinopyroxene (augite), epidote, chlorite, saussuritized plagioclase and biotite as major constituent. Minor grains of orthopyroxene are also present. Most of orthopyroxene grains have been converted to horneblende (pseudomorh after orthopyroxene). Titanite is present as accessory. Carbonate stringer is seen passing through this rock, which indicates secondary vein activity (Fig.3.3c). It contains 26
5 Fig.3.2 Photomicrographs taken from the thin section of the sample KIL-1, showing, sericitization, in which plagioclase is altered into sericite (Fig. a) and muscovite (Fig. b), uralitization wherein clinopyroxene is replaced by hornblende (Fig. c), antiperthite texture in plagioclase grain (Fig. d), inclusion of ilemenite in brown hornblende (Fig. e), release of Fe from titanite (Fig.f). Plg: Plagioclase, Ser: Sericite, Ms: Muscovite, Cpx: Clinopyroxene, kfs: K-feldspar. 27
6 calcite, epidote, and chlorite besides saussuritized plagioclase as secondary alteration product. Calcites are primary and appear to be formed by action of volatiles (CO 2 ). Preferred alignment of ferromagnesian minerals like hornblende and biotite (Fig. 3.3d) is also seen, which may have been caused due to intense stress related deformation. It is pierced by a carbonate stringer, suggesting hydrothermal fluid interaction. KIL-9: Holocrystalline coarse grained altered granulitic rock showing pronounced metasomatic alterations. It contains plagioclase, hornblende, clinopyroxene, altered or relict orthopyroxene, quartz and biotite as major constituents and titanite as secondary. Most of the plagioclase is found to be saussuritized due to intense fluid interaction. Secondary released iron oxide is also present at the contact of titanite and biotite mineral. Antiperthite texture and deformed quartz vein can be clearly seen. KIL-10: Coarse grained rock mainly composed of plagioclase, hornblende, biotite as major constituents and titanite as accessory. This sample exhibit highly altered orthoclase and mafic minerals with released iron. Clinopyroxene grains appeared degenerated due to recrysatallization. Mafic minerals are in abundance, which are often altered to chlorite, clinopyroxene and hornblende minerals. KIL-11: Schistose amphibolite rock which contains hornblende, plagioclase, biotite, quartz, chlorite as major minerals and epidote, titanite, apatite, opaques as accessories. Here schistocity is defined by alignment of hornblende and biotite minerals. KIL-12: Medium grained partially retrograded deformed granulite rock, containing clinopyroxene, orthopyroxene and hornblende (Fig.3.3e), besides, calcic plagioclase, biotite as major constituents and titanite as accessory. Some grains of orthopyroxene are highly pleochroic. Clinopyroxenes grains are marginally altered to hornblende during the process of uralitisation (Fig.3.3f). Secondary saussuritization and biotitisation are also seen, which may indicate retrograde overprinting. 28
7 Fig. 3.3 Photomicrographs taken from the thin sections showing recrystallized boundary of biotite with released iron oxide in KIL-1 (Fig.a). saussuritization of plagioclase in KIL-2 (Fig.b), typical vein containing calcite in KIL-8 (Fig.c), preferred alignment of hornblende and plagioclase feldspar in KIL-8 (Fig.d), orthopyroxene and clinopyroxene grains in KIL-12 (Fig.e), saussuritized plagioclase with altered clinopyroxene in KIL-12 (Fig. f). Plg: Plagioclase, Hbl: Hornblende, Opx: Orthopyroxene, Cpx: Clinopyroxene, Bt: Biotite. 29
8 KIL-13: It is a medium-grained amphibolite rock containing altered hornblende, plagioclase feldspar, clinopyroxene altered to green and brownish green amphiboles, minor apatite, pyrite and chalcopyrite with secondary carbonate veins. Presence of pyrite and chalcopyrite inclusions possibly indicate role of high grade metamorphic fluids. In most oxidized granulites, pyrite is a dominant sulphide with chalcopyrite as accessory. Further, hornblende and plagioclase are aligned in a particular direction (Fig.3.4a), indicating stress related deformation in which alignment and elongation of minerals usually takes place in the direction of least stress. Compositionally, this rock is amphibolite but it exhibits granulitic textures. Clear granular texture is also present which is one of the distinct metamorphic texure. KIL-14: Medium grained amphibolite rock containing hornblende, plagioclase, clinopyroxene, biotite, zoned orthoclase and quartz as major and titanite and pyrite as secondary minerals. Clinopyroxene are partially retrograded to hornblende with sausuritized plagioclase (Fig.3.4b). This sample exhibits feeble foliation, defined by parallel alignment of partially to completely altered hornblende and plagioclase (Fig.3.4c), the later showing partial sericitization (clay making process) with recrystallization at curved boundaries of the hornblende (Fig.3.4d). KIL-18: Inequigranular coarse grained rock which is mainly composed of plagioclase feldspar, biotite, hornblende, k-feldspar and quartz. Volumetric percentage of plagioclase is more than alkali feldspar. Medium to fine grained recrystallised quartzo-feldspathic groundmass contains partial chloritized biotite. Minor apatite and magnetite are also present. Rock is deformed as evidenced by undulose extinction in quartz. This sample shows development of foliation planes as, defined by preferred alignment of hornblende, biotite and plagioclase. KIL-19: Coarse grained rock, with major constituents as plagioclase feldspar, biotite, quartz, hornblende, clinopyroxene, muscovite, chlorite, orthoclase, albite. Opaque minerals are present as accessory, which are found at the boundary of biotite (Figs. 3.4e, f). Flattening of grains can also be seen in biotite and plagioclase. 30
9 Clinopyroxene grains are seen converting into hornblende, indicating uralitization during retrogression. Here also, most of the plagioclase grains are sausuritized. Rock is deformed and in photomicrograph, shearing effect can be seen. This rock is well banded, which is represented by quartzo-feldspathic and ferromagnesium rich layer. KIL-21: A medium to coarse grained altered granulite rock that exhibits porphyritic texture and contain quartz, calcic plagioclase, biotite and hornblende as major minerals and titanite and magnetite as a secondary. Plagioclase phenocrysts are zoned and sausurritized. Margins of plagioclase and hornblende grains are curved. Alteration is evident here due to the presence of abundant clay minerals and muscovite. KIL-24: Coarse grained foliated amphibolite rock, containing plagioclase, hornblende, biotite, quartz, k-feldspar as major constituents and titanite as secondary mineral. Intense saussuritization, biotitization and uralitisation suggest retrogression. Most of the amphibole and plagioclase grains are recrystallized and curved at the boundary. KIL-25: Coarse grained quartzo-feldspathic rock. It contains abundant zoned plagioclase feldspar, biotite, amphibole, and quartz. Biotitization is also seen where hornblende is being replaced by biotite (Fig.3.5a). Quartz is deformed showing undulose extinction (Fig.3.5b). Cluster of opaque minerals can also be seen at the contact with biotite mineral (Fig.3.5c), which is formed due to breakdown of biotite during the late-stage of magma crystallisation. Presence of subgrain formation (polygonisation) in quartz together with biotitization (Fig.3.5d), indicate deformation and retrograde metamorphism. Perthitic intergrowth can also be seen here (Fig.3.5e). Myremekite texture consisting of irregular wormy blebs of quartz in a plagioclase host, adjacent to alkali feldspar grain is also noticed (Fig.3.5f). KIL-26: It is an inequigranular coarse grained granulitic rock containing calcic plagioclase, clinopyroxene, relict orthopyroxene, hornblende, biotite, rutile, microcline as major and zoisite, clinozoisite, titanite, magnetite, pyrite as accessories. 31
10 Fig.3.4 Photomicrographs taken from the thin sections showing preferred alignment in hornblende in KIL-13 (Fig.a), saussuritization of plagioclase in KIL-14 (Fig.b), alignment in amphibole and plagioclase grains in KIL-14 (Fig.c), alignment of hornblende and plagioclase grains with curved boundary in KIL-14 (Fig.d), biotite, opaques and plagioclase in KIL-19 (Fig.e), opaque, biotite and quartz in KIL-19 (Fig.f). Hbl: Hornblende, Qtz: Quartz, Plg: Plagioclase, Opq: Opaque, Bt: Biotite, Cpx: Clinopyroxene. 32
11 Pleochroic haloes due to inclusions and antiperthite texture (Fig. 3.6a), as well as myrmekite textures are also noticed. Most of the titanites are associated with mafic hornblende and indicate released iron. Zoned plagioclase rims have been saussuritized and shows development of zoisite (Fig.3.6b). Besides, plagioclase grains show partial albitization. Occurrence of zoned saussuritized, sericitized and albitized plagioclase, together with biotitization (Fig. 3.6c) indicates retrograde overprinting. KIL-27: Amphibolite rock that contains hornblende, plagioclase, biotite and relict clinopyroxene as major minerals and quartz as minor. Small amount of titanite and pyrite are also present. This rock is highly biotitized (Fig.3.6d), where hornblende has been replaced by biotites. Calcic plagioclase is saussuritized and completely altered into secondary minerals like calcite and clays. At the boundary of hornblende, titanite grains can also be observed (Fig.3.6e). KIL-28 and KIL-29: Coarse grained holocrystalline quartzo-feldspathic rock which contains plagioclase, k-feldspar, quartz, amphibole, biotite as major minerals and titanite, apatite as accessories. Large grains of zoned plagioclase indicate disequilibrium conditions. Zoisite, clinozoisite and epidote minerals are present as secondary alteration product. KIL-31: Medium grained highly altered quartzo-feldspathic rock containing hornblende, plagioclase, epidote, chlorite, quartz as major constituents and ilmenite, magnetite, pyrite, titanite and clinozoisite are present in minor amounts. Quartz grains are deformed. Abundant carbonate-rich stringers are seen passing through the minerals. This rock also shows plagioclase segregation at some places. During the saussuritization of plagioclase, calcium is released which formed epidote, besides chlorite and clinozoisite (Fig.3.6f). Hornblende shows reaction rims and indicates primary alteration. Chloritization and biotitization are also commonly seen in this sample. 33
12 Fig.3.5 Photomicrographs taken from the thin section of the sample KIL-25 showing biotitization (Fig.a), undulose extiction in quartz (Fig.b), hornblende and opaque minerals (Fig.c), subgrain formation in quartz (Fig.d), perthite texture (Fig.e), myrmekite texture (Fig.f). Bt: biotite, Hbl: Hornblende, Opq: Opaque, Qtz: Quartz, Ser: Sericite, Bt: Biotite, Kfs: K-feldspar, Tnt: Titanite. 34
13 KIL-36: Coarse grained altered amphibolite rock which contains plagioclase feldspar, amphibole, biotite, quartz as major constituent. Opaque minerals, formed at the contact of biotite and plagioclase during the breakdown of biotite, are present as accessories. The plagioclases are coarse-grained and show deformed bent twin lamellae with marginal recrystallisation. Grain elongation and shearing effect can also be seen (Fig.3.7a). KIL-38: Coarse grained holocrystalline quartzo-feldspathic rock which contains altered plagioclase, quartz, k-feldspar, amphiboles, biotite as major mineral and titanite, opaque are present as accessories. KIL-40: Coarse grained amphibolite rock showing hornblende with sausuritized plagioclase (Fig.3.7b). It shows mineralogical similarity with KIL-39. KIL-42: Medium to coarse grained altered rock which constitutes plagioclase feldspar, biotite, amphibole, quartz as major minerals. This sample shows weakly developed foliation, characterised by parallel alignment of partially to completely altered plagioclase, quartz, biotite, opaque and amphibole. Quartz and plagioclase grains are elongated, deformed and marginally recrystallized. Cluster of opaques minerals can be seen (Fig.3.7c, d) at the boundary of biotite and quartz grains, which show preferred alignment. In this sample biotite is almost invariably associated with opaque minerals, characteristically forming rims around the magnetite and ilmenite, especially at the contact with plagioclase. KIL-44 and 45: Coarse grained holocrystalline rock which is dominantly composed of plagioclase, amphiboles, k-feldspar, quartz and biotite as major minerals. It also contains abundant titanite as accessory mineral. KIL-47: Medium to coarse grained holocrystalline rock which exhibits similar mineralogy and texture to sample KIL-44. Preferred alignment of plagioclase, hornblende and chlorite is seen along with titanites (Figs.3.7e, f). 35
14 Fig.3.6 Photomicrographs taken from the thin sections showing, antiperthite texure in KIL-26 (Fig.a), occurrence of zoisite and saussuritized plagioclase phenocryst in KIL-26 (Fig.b), process of biotitization where hornblende is seen converted into biotite in KIL-26 (Fig.c), biotitization in KIL-26 (Fig.d) and hornblende with titanite grain in KIL-27 (Fig.e), formation of chlorite and epidote due to saussuritization in KIL-31 (Fig.f). Bt: biotite, Hbl: Hornblende, Plg: Plagioclase, Qtz: Quartz, Kfs: K-feldspar, Tnt: Titanite. 36
15 Fig.3.7 Photomicrographs taken from the thin sections of the samples showing, shearing effect in KIL-36 (Fig.a), plagioclase, k-feldspar and hornblende in KIL- 40 (Fig.b). elongated deformed quartz and clusters of opaques in KIL-42 (Fig.c), opaque with hornblende and quartz in KIL-42 (Fig.d), altered plagioclase with hornblende and titanite in KIL-47 (Fig.e), plagioclase, hornblende and chlorite with preferred alignment in KIL-47 (Fig.f). Hbl: Hornblende, Plg: Plagioclase, Qtz: Quartz, Kfs: K-feldspar, Tnt: Titanite, Opq: Opaque, Chl: Chlorite. 37
16 3.2.3 Acid group This group consists of ten samples and characterised by salic minerals. Percentages of femic minerals are comparatively less in comparison to basic and intermediate group. Here, large porphyroblast grains of plagioclase and k-feldspar can be clearly seen. It dominantly contains quartz and plagioclase. Few samples are characterized by quartzo-feldspathic matrix, with relatively high volumetric percentage of quartz. KIL-15: Plagioclase and hornblende dominating coarse to medium grained holocrystalline amphibolite rock, which contains saussuritized plagioclases and recrystallized hornblende with curved boundary. KIL-16 and 17: Holocrystalline coarse grained amphibolite rock exhibiting plagioclase, hornblende, biotite, quartz as major constituents and titanite and apatite as accessories. Plagioclase gains are mostly sausuuritized. Small scale biotitisation is also seen. Mineralogicaly, this rock is metagabbroic in nature having suffered amphibolite facies metamorphism. KIL-20: It is a deformed quartzo-feldspathic rock, containing coarse-grained zoned phenocrysts showing porphyritic microstructure. Magnetite, pyrite and chalcopyrite are present in minor quantities together with secondary carbonates. The volumetric percentage of plagioclase is more than 50%. Myrmekitic texture is visible along the margins, which show exsolution of k-feldspar lamellae (Fig.3.8 a). Quartz grains exhibit deformed bands showing undulose extinction. Few grains of biotites are kinked (Fig.3.8 b), indicating that the rock has undergone substantial deformation, which usually occurs at high shock pressure conditions. KIL-22: Coarse grained holocrystalline porphyritic rock with plagioclase phenocryst and quartzo-feldspathic groundmass. In this rock, plagioclase, k-feldspar, biotite and hornblende is present as major constituents and titanite and apatite as accesories. Undulose extinction in quartz indicates deformation. Presence of biotitization and saussuritization indicate hydrothermal alteration. 38
17 KIL-23: Coarse grained, holocrystalline porphyritic rock containing plagioclase porphyroblast. KIL-30 and 32: Medium grained rock composed of plagioclase, hornblende, quartz and biotite as major constituents and titanite as accessories. It dominantly consists of sausuritized and sericitized plagioclase, together with secondary alteration product such as, zoisite, clinozoisite, epidote, sericite. KIL-33: Medium to coarse grained granodiorite rock which is dominantly rich in quartzo-feldspathic material. Coarse grained holocrystalline, anhedral to subhedral grains exhibit hypidiomorphic texture. It is composed of quartz, orthoclase, plagioclase, biotite and hornblende as major minerals and titanite as accessory. Suturing in quartz grain boundary (Fig.3.8.c) and undulose extinction with elongated quartz grains (Fig.3.8.d) suggest intense deformation. KIL-43: Holocrystalline, coarse grained quartzo-feldspathic rock composed of sausuritized and sericitized plagioclase, recrystallized hornblende, biotite, k-feldspar and quartz. Titanite is present in minor quantity. 3.3 Deformation signature Most of the samples from Killari region show deformational textures such as kinking in biotite, subgrain formation in quartz, shearing effect, undulose extinction in quartz, flame perthites and elongation in quartz grain, quartz ribbons etc. Preferred alignments of hornblende, biotite, quartz and plagioclase can be seen in samples KIL-8, 11 and 13. Deeply sutured boundary in quartz is noticed in sample KIL-33. Most of the quartz grains are characterized by dusty appearance, elongation in grain size and undulose extinction. The deformed quartz grains have sub parallel alignment of long axes, defining thereby a crude foliation along with sub parallel orientation of amphiboles and biotite. Almost all the basement samples exhibit weak to intense deformation which seems to have been formed during the event of metamorphism. 39
18 Fig.3.8 Photomicrographs taken from the thin sections showing, myrmekitic texture in contact with plagioclase and perthetic feldspar in KIL-20 (Fig.a), kinked biotite in KIL- 20 (Fig.b), suturing in quartz grain in KIL-33 (Fig.c), elongaion in quartz grains in KIL- 33 (Fig.d). Plg: Plagioclase, Qtz: Quartz, Kfs: K-feldspar, Bt: Biotite. 3.4 Modal analysis Mode refers to actual minerals present in the rock and it can be determined quantativaly to express the abundances of the mineral constituents in volume per cent. Representative modal percentages of samples are summarized in Table 3.1. Petrological studies have indicated that the basement samples are altered and deformed. In such cases, modal analysis does not provide accurate results. It only gives rough idea about volumetric percentage of major minerals. However, as 40
19 we are dealing with plagioclase and amphibole dominating rocks, we have carried out modal analysis on representative samples using standard point counting method on thin sections. The dominant mineral hornblende is found to vary between 20 % and 50%, followed by plagioclase from 10% to 80 %. In the case of tonalite, plagioclase percentage is more than k-feldspars exceeding 50%. Minerals which are altered and recrystallized and showing complete replacement are not included in counting. Petrographically these samples are showing large variation. So on the basis of modal analysis, we have classified these samples in QAP diagram (Fig.3.9), where we find that maximum samples fall in the field of quartz gabbro and gabbro, but few samples also confirm the tonalite and granodiorite affinity, which is also reflected in the petrographic study on these samples. 3.5 Scanning Electron Microscope (SEM) studies Since clustering of opaque minerals is a characteristic feature, observed in many thin sections, we studied their nature under the Scanning Electron Microscope (SEM), wherein Hitachi, S-3400N model was used to characterise the opaque minerals. Most of the opaque minerals are represented by magnetite. A few grains of pyrite and chlacopyrite were also detected. Most of the magnetite and pyrite grains appear to be in the contact with amphibole and plagioclase grains. Grains of magnetite have shown high peak of iron with little amount of silica and oxide. Magnetite grains also show presence of other oxides such as MgO, Al 2 O 3, and SiO 2 which suggest reaction with other minerals within the grains through cracks and other weak zones. BSE images of the magnetite grains are shown in Fig Spot analyses were performed using energy-dispersive X-ray spectroscopy (EDS), to estimate the qualitative chemical composition of the observed phases. The qualitative relative elemental peaks are also shown along with the BSE images, which inturn shows characteristic elements in the respective mineral grains. 41
20 Table-3.1 Modal composition and microstructural characteristics of crystalline basement rocks from Killari borehole (KLR-1) drilled in 1993 Latur earthquake epicentral region of Maharashtra (India). Sample no. Density (g/cm 3 ) Primary phases (Vol. %) Accessory Micro-structure Basic rocks KIL Plag (30), Qtz (6), Amph (25), Bt (25) Kfsp(2) Opq, Tnt, Ap Medium-grained amphibolite with clusters of opaques KIL Plag (23), Qtz (1), Amph (45), Bt (26) Kfsp(0.5) Opq, Tnt, Ap Medium-grained amphibolite with clusters of opaques Intermediate rocks KIL Plag (50),Amph (31,) Kfsp (6), Qtz (6), Bt (4)Cpx (1), Ep (1) Tnt, Opq, Ap Plagioclase abundant rock with granoblastic texture KIL Plag (48), Amph (36), Bt (8), Qtz (3), Kfsp (2) Tnt, Opq, Ap Medium-grained amphibolite KIL Plag (57), Amph (32), Bt (6), Qtz (3), Ep(1) Opq Medium-grained amphibolite KIL Plag (45), Amph (41), Bt (8), Qtz (3) Ep (3) Tnt Medium-grained deformed rock showing metamorphic textures and sauss.plag. KIL Amph (56), Plag (28), Bt (8), Ep (8) Qtz(2) Opq, Tnt, Ap Medium-grained amphibolite KIL Amph (46), Plag (29), Bt (22), Qtz (1) Cpx (1) Tnt Medium-grained granulite rock. KIL Amph (42), Plag (48), Qtz (6), Ep (3) Opq, Tnt, Ap Medium-grained amphibolite KIL Amph (48), Plag (45), Qtz (3), Cpx (3) Opq, Tnt Medium-grained rock containing partially sauss.plag and cpx partially replaced by hb. KIL Plag (64), Bt (27), Qtz (6), Amph (2) Opq, Tnt, Ap Inequigranular rock with coarse grained porphyroblast KIL Plag (34), Qtz (18), Amph (15), Bt (18) Opq, Tnt Plagioclase dominating rock with lots of opaque and deformed quartz KIL Plag (44), Amph (12), Qtz (11), Bt (33) Opq, Tnt Medium-grained granulite rock. KIL Plag (41), Amph (43), Bt (6), Cpx (3), Ep (2), Kfsp (4) Tnt Medium-grained amphibolite KIL Plag (34), Qtz (28), Amph (18), Bt (8) Kfsp(10) Opq, Tnt Medium grained deformed rock with quartz subgrains and biotitization KIL Plag (50), Amph (26), Bt (8), Qtz (7), Kfsp (6), Ep (2) Opq, Tnt Medium-grained granulite rock. KIL Amph (56), Plag (18), Bt (21), Qtz (1), Ep (3) Opq, Ap, Tnt Biotite-rich medium-grained rock KIL Plag (80), Qtz (3), Amph (1), Cpx (3), Ep (8), Kfsp (4) Tnt, Opq Highly altered medium-grained rock. KIL Amph (45), Plag (35), Qtz (6), Bt (12) Kfsp (2) Opq, Tnt Medium grained amphibolites with shearing effect and clusters of magnetite KIL Plag (23), Qtz (20), Amph (17), Bt (14) Kfsp (2) Opq Amphibole and plagioclase dominating rock with clusters of opaques Acid rocks KIL Plag (72), Qtz (12), Bt (10), Kfsp (5) Opq Coarse-grained deformed rock showing porphyritic texture. KIL Plag (39), Qtz (45), Amph (10), Bt (6) Tnt Coarse to medium-grained felsic rock. Amph: amphibole; Plag: plagioclase; Bt: biotite; Qtz: quartz; Cpx: clinopyroxene; Ep: epidote; Kfsp: Kfeldspar; Tnt: titanite; Ap: apatite; Opq: opaque; Sauss: Saussurite. 42
21 Fig.3.9 QAP classification of coarse grained crystalline rocks (IUGS-BGS) (Upper Ternary) using Modal percentage.q: Quartz, A: Alkali feldspar, P: Plagioclase feldspar. 43
22 44
23 Fig Scanning Electron Microscopic images of opaque minerals. Back-scattered electron (BSE) photograph with spectrum image showing large grain of magnetite mineral with inclusion of other silicates in KIL-19 (Fig.a). BSE photograph with spectrum image showing opaque mineral magnetite in contact with amphibole in KIL-25 (Fig.b). BSE photograph with spectrum image showing opaque mineral magnetite in contact with plagioclase and amphibole in KIL-41 (Fig.c). BSE photograph with spectrum image showing opaque mineral pyrite in contact with amphibole in KIL-41 (Fig.d). BSE photograph with spectrum image showing irregular shape magnetite mineral with inclusion of other silicates in KIL-42 (Fig.e). 45
24 3.6 Summary As mentioned in the foregoing sections, petrologically, the basement rocks can be classified as meatasomatised, deformed and retrogressed amphibolite to granulite facies transional metabasic rocks conforming to midcrustal lithology. However, some samples correspond to granodiorite and tonalite in texture and composition. Petrologically, the amphibolite to granulite facies rocks are found to predominantly contain plagioclase + amphibole + biotite ± cpx ± opx + k-feldspar + quartz± chlorite as major constituents and titanite + epidote + chalcopyrite ± pyrite ± magnetite ± illmenite + apatite + zoisite + clinozoisite as accessories. These are medium to coarse grain rocks, which exhibit holocrystalline to hypidiomorphic textures. A crude, weakly developed foliation, defined by parallel alignment of partially to completely altered ferromagnesian minerals like hornblende, biotite, chlorite and relict orthopyroxene and elongated, deformed, marginally recrystallized quartz, characterize these rocks. Matrix assemblages are either coarse grained or fine grained. Coarse grained assemblages typically contain zoned plagioclase minerals, whose rims were affected by chemical re-equilibrium in response to changing physical conditions (pressure, temperature, fluid activity). Large grains of sausurritized and sericitized plagioclase porphyroblast, resulted into secondary alteration products such as epidote, sericite, zoisite, clinozoisite. Development of epidote and secondary minerals, may have been formed through the hydration reaction of plagioclase during post-crystalline deformation. Most of the plagioclase grains are altered and recrystallized which, show bent lamellae and mortar structures. Majority of such grains are free of inclusions, but at places, abundant epidote is found at their boundaries. Composition of plagioclase varies from albite to anorthite. Potash feldspar is generally perthitic in nature. Hornblende crystals are medium to coarse grained with the pleochroism which indicate schiller structure due to the presence of opaque dust and streaks along the cleavage traces. Some amphibole grains show inclusions of quartz, ilmenite, titanite, magnetite, epidote and plagioclase. Hornblende grains commonly vary from green to brown in color, which 46
25 is a typical feature of upper amphibolite grade assemblages. Sometimes such grains are altered, showing recrystallized, curved boundary. Amphibole grains also exhibit biotite and chlorite formation along the cleavage plane, which are of secondary origin. Biotite has partially to completely replaced the amphibole or orthopyroxene in some samples. Quartz is generally more sutured and shattered. Likewise tonalite to granodiorite rocks exhibit plagioclase + amphibole + biotite ± cpx + k-feldspar + quartz ± chlorite as major constituents and titanite + epidote + pyrite ± magnetite ± illmenite + apatite + zoisite as accessories. In these rocks, volumetric percentage of plagioclase is more, varying from 50 to 60% and percentage of k-feldspar is less. They do not reveal any metamorphic equilibration texture. In QAP diagram these samples plot in the field of quartz gabbro, gabbro, tonalite and granodiorite. Some of the samples contain opaque clusters. SEM studies suggest that they are mainly magnetite with a few grain of pyrite, indicating their derivation from melts rich in iron oxides. Magnetite grains are mostly seen formed at the boundary of biotite and amphiboles. Few grains of titanite have also released iron oxide. Deformation signatures such as, preferred alignment of flaky minerals of biotites and amphiboles and kinked biotite, undulose extinction in quartz, sutured quartz, polygonisation, elongation in grain size and flame perthite are also present in these rocks. Various intergrowth textures such as perthite, antiperthite and myremekite are also seen, which are related to retrogression processes at the time of cooling and falling of temperature and pressure. 47
Chapter - IV PETROGRAPHY. Petrographic studies are an integral part of any structural or petrological studies in
Chapter - IV PETROGRAPHY 4.1. Introduction Petrographic studies are an integral part of any structural or petrological studies in identifying the mineral assemblages, assigning nomenclature and identifying
More informationThis work follows the international standard nomenclature (IUGS) in naming the
CHAPTER FIVE: PETROGRAPHY This work follows the international standard nomenclature (IUGS) in naming the different Platreef rock types. It should be noted that new lithologies not described in chapter
More informationIgneous petrology EOSC 321
Igneous petrology EOSC 321 Laboratory 2: Determination of plagioclase composition. Mafic and intermediate plutonic rocks Learning Goals. After this Lab, you should be able: Determine plagioclase composition
More informationLithology: Olivine-rich gabbro medium grained Observer: Texture: granular Ave. grain size: medium grained [345] Shape Habit Comments
THIN SECTION LABEL ID: 179-1105A-1R-2-W 88/91-TSB-TSS Piece no.: #02 TS no.: Igneous Medium-grained olivine gabbronorite; plagioclase chadacryst within orthopyroxene oikocryst; rims of olivine and clinopyroxene
More informationIgneous petrology EOSC 321 Laboratory 1: Ultramafic plutonic and volcanic rocks
1 Igneous petrology EOSC 321 Laboratory 1: Ultramafic plutonic and volcanic rocks Material Needed: a) Microscope, b) Glossary of rock names and textures (see Pages 24-25 and 43 of Winter); c) Lab1 Manual
More informationIgneous petrology EOSC 321
Igneous petrology EOSC 321 Laboratory 1: Review of optical properties of minerals. Ultramafic plutonic and volcanic rocks Material Needed: a) Microscope, b) Glossary of rock names and textures (see Pages
More informationName Petrology Spring 2006
Igneous rocks lab Part I Due Tuesday 3/7 Igneous rock classification and textures For each of the rocks below, describe the texture, determine whether the rock is plutonic or volcanic, and describe its
More informationA-13R-CC (24-25 cm) No. 38 OBSERVER: SKE, RUB, MAN, BES ROCK NAME: Amphibolite. GRAIN SIZE: Medium-grained. TEXTURE: Elongated amphibole
173-1067A-13R-CC (24-25 cm) No. 38 OBSERVER: SKE, RUB, MAN, BES ROCK NAME: Amphibolite. TEXTURE: Elongated amphibole grains displaying preferred orientation. NAME MODE (%) SIZE (mm) SHAPE COMMENTS Amphibole
More informationLaboratory 7: Alkaline rocks
Laboratory 7: Alkaline rocks Learning Goals. After this Lab, you should be able: Identify the key rock-forming minerals in alkaline rocks Identify textures of alkaline rocks in thin sections Name alkaline
More informationAdvanced Igneous petrology EOSC 530 Laboratory 1: Mantle Xenoliths
EOSC 530 Labs 1 Instructor: Kopylova Advanced Igneous petrology EOSC 530 Laboratory 1: Mantle Xenoliths Introduction: Upper mantle rocks can be found in ultramafic massifs or as xenoliths in basalts and
More informationIgneous petrology EOSC 321
Igneous petrology EOSC 321 Laboratory 5: Conoscopy. Felsic plutonic rocks Learning Goals. After this Lab, you should be able: Use conoscopic obervations to determine the uniaxial or biaxial character of
More informationLorence G. Collins. July 9, 1997
1 ISSN 1526-5757 20. FAILURE OF THE EXSOLUTION SILICA-PUMP MODEL FOR THE ORIGIN OF MYRMEKITE: EXAMINATION OF K-FELDSPAR CRYSTALS IN THE SHARPNERS POND TONALITE, MASSACHUSETTS, USA Introduction Lorence
More informationIntroduction to Geology Spring 2008
MIT OpenCourseWare http://ocw.mit.edu 12.001 Introduction to Geology Spring 2008 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. Regional metamorphism
More informationEESC 4701: Igneous and Metamorphic Petrology METAMORPHIC ROCKS LAB 8 HANDOUT
Sources: Caltech, Cornell, UCSC, TAMIU Introduction EESC 4701: Igneous and Metamorphic Petrology METAMORPHIC ROCKS LAB 8 HANDOUT Metamorphism is the process by which physical and chemical changes in a
More informationTextural Terms in Igneous Petrology
Textural Terms in Igneous Petrology Adcumulate - Cumulus crystals continue to grow and displace the intercumulus liquid. Example: Opx adcumulate texture with minor interstitial chromite and plagioclase
More informationObjectives of this Lab. Introduction. The Petrographic Microscope
Geological Sciences 101 Lab #9 Introduction to Petrology Objectives of this Lab 1. Understand how the minerals and textures of rocks reflect the processes by which they were formed. 2. Understand how rocks
More informationHand specimen descriptions of metamorphic rocks
Hand specimen descriptions of metamorphic rocks Hand specimen descriptions for metamorphic rocks are like those for igneous rocks. The objective is to tell someone looking at it everything they need to
More informationName Petrology Spring 2006 Igneous rocks lab Part II Hand samples of igneous rocks Due Tuesday 3/7
Igneous rocks lab Part II Hand samples of igneous rocks Due Tuesday 3/7 1. Use the color index and density of the rock to establish whether it is felsic, intermediate, mafic, or ultramafic. 2. Determine
More informationCore Photo. Site 1111 Hole A Core 2R Rec. 0.73% mbsf
VISUAL CORE DESCRIPTIONS, SITE 1111 1 1111A-2R message openfile IMAGES/1111A2R.PDF 1111A-1R NO RECOVERY Site 1111 Hole A Core 2R Rec. 0.73% 10.1-19.7 mbsf GRAIN SIZE METERS 1 SECTION granule very coarse
More informationTextures of Igneous Rocks
Page 1 of 6 EENS 212 Prof. Stephen A. Nelson Petrology Tulane University This document last updated on 12-Feb-2004 Introduction to Igneous Rocks An igneous rock is any crystalline or glassy rock that forms
More informationPetrographic Data. Appendix C. Edward F. Stoddard
Appendix C Petrographic Data Edward F. Stoddard Standard size (27 46 mm) petrographic thin sections (30 m) of all rock and artifact samples were examined with a binocular Zeiss polarizing microscope using
More informationMetamorphic Petrology GLY 262 Lecture 3: An introduction to metamorphism (II)
Metamorphic Petrology GLY 262 Lecture 3: An introduction to metamorphism (II) Metamorphic processes Metamorphism is very complex and involves a large number of chemical and physical processes occurring
More informationMetamorphic Petrology. Jen Parks ESC 310, x6999
Metamorphic Petrology Jen Parks ESC 310, x6999 jeparks@sciborg.uwaterloo.ca Definition of Metamorphism The IUGS-SCMR SCMR definition of metamorphism: Metamorphism is a subsolidus process leading to changes
More information2. REPLACEMENT OF PRIMARY PLAGIOCLASE BY SECONDARY K-FELDSPAR AND MYRMEKITE
1 ISSN 1526-5757 2. REPLACEMENT OF PRIMARY PLAGIOCLASE BY SECONDARY K-FELDSPAR AND MYRMEKITE Lorence G. Collins email: lorencec@sysmatrix.net November 21, 1996; revised February 17, 1997 The following
More informationHow 2 nd half labs will work
How 2 nd half labs will work Continue to use your mineral identification skills Learn to describe, classify, interpret rock hand samples: Igneous sedimentary metamorphic volcanic plutonic (1 week) (1 wk)
More information12. MYRMEKITE IN THE SANTA ROSA MYLONITE ZONE, PALM SPRINGS, CALIFORNIA
1 ISSN 1526-5757 12. MYRMEKITE IN THE SANTA ROSA MYLONITE ZONE, PALM SPRINGS, CALIFORNIA Lorence G. Collins email: lorencec@sysmatrix.net February 15, 1997 Introduction Myrmekite, containing tiny quartz
More informationBUREAU OF MINERAL RESOURCES GEOLOGY AND GEOPHYSICS.
COMMONWEALTH OF AUSTRALIA. DEPARTMENT OF NATIONAL DEVELOPMENT. BUREAU OF MINERAL RESOURCES GEOLOGY AND GEOPHYSICS. " i RECORDS.... - ~~ ' '"'1 -:-.,,',. _. ;.::: ::'VW r' _.-- '-.--..... ~.,.."..,.."..-
More informationPetrographic Investigation of Two Float Samples from the Goldstake Property, Northern Ontario. Prepared for: Mr. Robert Dillman
Petrographic Investigation of Two Float Samples from the Goldstake Property, Northern Ontario Prepared for: Mr. Robert Dillman by Jim Renaud Renaud Geological Consulting Ltd. 21272 Denfield Road London,
More informationGLY 155 Introduction to Physical Geology, W. Altermann
Earth Materials Systematic subdivision of magmatic rocks Subdivision of magmatic rocks according to their mineral components: Content of quartz SiO 2 ( free quartz presence) Quartz with conchoidal breakage
More informationIgneous petrology EOSC 321 Laboratory 8: Intermediate and Felsic Volcanic Rocks. Pyroclastic Rocks
321 Lab 8 Instructor: L. Porritt - 1 - Igneous petrology EOSC 321 Laboratory 8: Intermediate and Felsic Volcanic Rocks. Pyroclastic Rocks Learning Goals. After this Lab, you should be able: Identify fine-grained
More informationLAB 6: COMMON MINERALS IN IGNEOUS ROCKS
GEOLOGY 17.01: Mineralogy LAB 6: COMMON MINERALS IN IGNEOUS ROCKS Part 2: Minerals in Gabbroic Rocks Learning Objectives: Students will be able to identify the most common silicate minerals in gabbroic
More informationGeodiversity Research Centre, Australian Museum, Sydney, NSW 2010, Australia.
Cumulate-rich xenolith suite in Late Cenozoic basaltic eruptives, Hepburn Lagoon, Newlyn, in relation to western Victorian lithosphere F. L. SUTHERLAND 1, J. D. HOLLIS 2, W. D. BIRCH 3, R. E. POGSON 1
More informationFeldspar in felsic orthogneiss as indicator for UHT crustal processes
260 Journal of Mineralogical and Petrological T. Hokada and Sciences, S. Suzuki Volume 101, page 260 264, 2006 LETTER Feldspar in felsic orthogneiss as indicator for UHT crustal processes Tomokazu HOKADA
More informationExam I. 1. (10 points) Give the following optical properties for the minerals listed below.
GLY306 Petrology Exam I 1. (10 points) Give the following optical properties for the minerals listed below. Color/pleochroism Extinction angle Cleavage angle Twining Refractive index Hornblende Plagioclase
More informationGEOLOGY 285: INTRO. PETROLOGY
Dr. Helen Lang Dept. of Geology & Geography West Virginia University SPRING 2016 GEOLOGY 285: INTRO. PETROLOGY Metamorphic Mineralogy depends on Temperature, Pressure and Rock Composition but Metamorphic
More informationBig Island Field Trip
Big Island Field Trip Space Still Available Group Airline Tickets May be available if enough people sign on If interested send email to Greg Ravizza Planning Meeting Next Week Will
More informationIgneous Rocks. Sedimentary Rocks. Metamorphic Rocks
Name: Date: Igneous Rocks Igneous rocks form from the solidification of magma either below (intrusive igneous rocks) or above (extrusive igneous rocks) the Earth s surface. For example, the igneous rock
More informationLorence G. Collins. July 24, 1998
1 ISSN 1526-5757 28. Primary microcline and myrmekite formed during progressive metamorphism and K-metasomatism of the Popple Hill gneiss, Grenville Lowlands, northwest New York, USA Introduction Lorence
More informationLAB 5: COMMON MINERALS IN IGNEOUS ROCKS
EESC 2100: Mineralogy LAB 5: COMMON MINERALS IN IGNEOUS ROCKS Part 1: Minerals in Granitic Rocks Learning Objectives: Students will be able to identify the most common minerals in granitoids Students will
More informationMineral/feature Modal% Size, morphology, distinguishing optical properties
Sample#: FIL 10-1 Rock Name: Olivine bearing, vesiculated 2-Px basaltic andesite Hand-specimen description: Highly porphyritic and vesiculated (1-5mm) medium-grained dark grey groundmass with abundant
More informationGY-343 Petrology Petrographic Microscope Laboratory
Introduction to the Petrographic Microscope In this laboratory you will be using the petrographic microscope to analyze thin sections of various types of igneous rocks. You will be assigned a thin section
More informationAmphibole. Note the purple to blue-gray pleochroism in the glaucophane in this slide.
Amphibole Glaucophane blue Note the purple to blue-gray pleochroism in the glaucophane in this slide. Glaucophane blue Note the anomalous blue-gray interference colors in the glaucophane in this slide.
More informationIgneous Rock Classification, Processes and Identification Physical Geology GEOL 100
Igneous Rock Classification, Processes and Identification Physical Geology GEOL 100 Ray Rector - Instructor Major Concepts 1) Igneous rocks form directly from the crystallization of a magma or lava 2)
More informationStudent Name: College: Grade:
Student Name: College: Grade: Physical Geology Laboratory IGNEOUS MINERALS AND ROCKS IDENTIFICATION - INTRODUCTION & PURPOSE: In this lab you will learn to identify igneous rocks in hand samples from their
More informationEngineering Geology ECIV 2204
Engineering Geology ECIV 2204 Instructor : Dr. Jehad Hamad 2017-2016 Chapter (3) Igneous Rocks Chapter 3: Rocks: Materials of the Solid Earth Igneous Rocks Chapter 3: Rocks: Materials of the Solid Earth
More informationLAB 3: COMMON MINERALS IN SEDIMENTARY ROCKS, Part 1
EESC 2100: Mineralogy LAB 3: COMMON MINERALS IN SEDIMENTARY ROCKS, Part 1 Learning Objectives: Students will be able to identify minerals that occur commonly in sandstones (quartz and feldspars), both
More informationChapter 8 Lecture. Earth: An Introduction to Physical Geology. Twelfth Edition. Metamorphism. Rocks. Tarbuck and Lutgens Pearson Education, Inc.
Chapter 8 Lecture Earth: An Introduction to Physical Geology Twelfth Edition Metamorphism and dmetamorphic Rocks Tarbuck and Lutgens Chapter 8 Metamorphic Rocks What Is Metamorphism? Metamorphism means
More informationSubsurface Geology of the Fenton Hill Hot Dry Rock Geothermal Energy Site
LA-14434-HDR Approved for public release; distribution is unlimited. Subsurface Geology of the Fenton Hill Hot Dry Rock Geothermal Energy Site Los Alamos National Laboratory, an affirmative action/ equal
More informationPhysical Geology 101 Laboratory MINERALS II Silicate and Carbonate Rock-Forming Minerals
Student Name: College: Grade: Physical Geology 101 Laboratory MINERALS II Silicate and Carbonate Rock-Forming Minerals I. INTRODUCTION: The purpose of this lab is you will improve your mineral identification
More informationFlame perthite in metapelitic gneisses at Cooma, SE Australia
American Mineralogist, Volume 84, pages 1760 1765, 1999 Flame perthite in metapelitic gneisses at Cooma, SE Australia R.H. VERNON Department of Earth and Planetary Sciences, Macquarie University, Sydney,
More informationMetamorphic Energy Flow. Categories of Metamorphism. Inherited Protolith Character. Inherited Fabric. Chemical Composition
Metamorphic Energy Flow Categories of Metamorphism Best, Chapter 10 Metamorphic processes are endothermic They absorb heat and mechanical energy Absorption of heat in orogenic belts Causes growth of mineral
More informationEENS 2120 Petrology Prof. Stephen A. Nelson. Types of Metamorphism
Page 1 of 7 EENS 2120 Petrology Prof. Stephen A. Nelson Types of Metamorphism This document last updated on 12-Apr-2018 Metamorphism is defined as follows: The mineralogical and structural adjustment of
More informationAppendix A2: Detailed description of all results
Appendix A2: Detailed description of all results This Appendix presents detailed descriptions of all results in this study. It is presented separately in order to streamline the main paper, and to provide
More informationSupplementary Table 1.
Supplementary Table 1. Compositional groups, typical sample numbers and location with their bulk compositional, mineralogical and petrographic characteristics at different metamorphic grades. Metamorphic
More informationGeology, Alteration and. Petrogenesis
The Mutooroo Copper Deposit: Geology, Alteration and Petrogenesis Graham S. Teale Consultant t Andrew T. Price Havilah Resources NL The speaker would like to thank Havilah Resources NL for the opportunity
More informationLecture 5 Sedimentary rocks Recap+ continued. and Metamorphic rocks!
Lecture 5 Sedimentary rocks Recap+ continued and Metamorphic rocks! Metamorphism Process that leads to changes in: Mineralogy Texture Sometimes chemical composition Metamorphic rocks are produced from
More informationUniaxial Minerals Descriptions
Uniaxial Minerals Descriptions Look at 6 uniaxial minerals Quartz Nepheline Calcite Apatite Tourmaline Zircon Examine composition, relief, colour, form, cleavage, twinning, birefringence, occurrence Quartz
More informationHand specimen descriptions of igneous rocks
Hand specimen descriptions of igneous rocks Basically, hand specimen descriptions should tell someone looking at a rock everything they need to know to recognize it in the field. Descriptions should be
More informationFIELD AND MICROSTRUCTURAL ANALYSIS OF A DIKE SWARM AND A DEFORMED COMPOSITE DIKE IN THE VINALHAVEN INTRUSIVE COMPLEX, MAINE
FIELD AND MICROSTRUCTURAL ANALYSIS OF A DIKE SWARM AND A DEFORMED COMPOSITE DIKE IN THE VINALHAVEN INTRUSIVE COMPLEX, MAINE OWEN MCKENNA Bowdoin College Sponsor: Rachel Beane INTRODUCTION The Vinalhaven
More informationMetamorphism and Metamorphic Rocks Earth - Chapter Pearson Education, Inc.
Metamorphism and Metamorphic Rocks Earth - Chapter 8 Metamorphism Transition of one rock into another by temperatures and/or pressures unlike those in which it formed Metamorphic rocks are produced from:
More information42. A study of intergrowth textures and their possible origins in the Alvand plutonic complex, Hamadan, Iran
1 ISSN 1526-5757 42. A study of intergrowth textures and their possible origins in the Alvand plutonic complex, Hamadan, Iran Abstract Ali A. Sepahi and Lorence G. Collins April 5, 2002 Various types of
More informationCOMPO- SITION. Euhedral skeletal. Twinned, zoned. Euhedral. Calcic. Anhedral. Mafic. brown clay.
SITE 9-9A-24X-CC (Piece,-2 cm) ROCK NAME: Basaltic vitrophyre. GRAIN : y to 2.2 mm. TEXTURE: Spherulitic; microporphyritic; subophitic. WHERE SAMPLED: At top of contact with volcaniclastic. Green clay
More informationLITHOLOGY REPORT - Detailed -
(m) (m) Lithology Sample # Length 50 0.00 11.76 10 Casing Minor Interval: 0.00 0.54 10A Casing above ground (Air) 0.54 11.76 10G Casing through gravel or overburden (Ground) 11.76 40.80 1c Interbedded
More informationChapter IV MINERAL CHEMISTRY
Chapter IV MINERAL CHEMISTRY Chapter-IV MINERAL CHEMISTRY 4.1 INTRODUCTION In this chapter, chemical analyses of different minerals present in various rocks of Mashhad granitoid plutons have been presented.
More informationMetamorphism (means changed form
Metamorphism (means changed form) is recrystallization without melting of a previously existing rock at depth in response to a change in the environment of temperature, pressure, and fluids. Common minerals
More informationTHESE TERMS GOVERN YOUR USE OF THIS DOCUMENT
THESE TERMS GOVERN YOUR USE OF THIS DOCUMENT ISBN 978-1-4868-0307-1 (CD) ISBN 978-1-4868-0308-8 (zip file) Your use of this electronic information product ( EIP ), and the digital data files contained
More informationGEOL Lab 11 (Metamorphic Rocks in Hand Sample and Thin Section)
GEOL 333 - Lab 11 (Metamorphic Rocks in Hand Sample and Thin Section) Introduction - Metamorphic rock forms from any pre-existing rock that undergoes changes due to intense heat and pressure without melting.
More information24. MAGMATIC RESORPTION VERSUS SUBSOLIDUS METASOMATISM --- TWO DIFFERENT STYLES OF K- FELDSPAR REPLACEMENT OF PLAGIOCLASE
1 ISSN 1526-5757 24. MAGMATIC RESORPTION VERSUS SUBSOLIDUS METASOMATISM --- TWO DIFFERENT STYLES OF K- FELDSPAR REPLACEMENT OF PLAGIOCLASE Lorence G. Collins email: lorencec@sysmatrix.net October 17, 1997
More informationMetamorphic Rock Origin and Identification
Metamorphic Rock Origin and Identification Physical Geology GEOL 101 Lab Ray Rector - Instructor http://www.rockhounds.com/rockshop/rockkey/index.html http://earthsci.org/education/teacher/basicgeol/meta/meta.html
More informationMetamorphism: summary in haiku form
Metamorphism & Metamorphic Rocks Earth, Chapter 8 Metamorphism: summary in haiku form Shape-shifters in crust. Just add heat and/or pressure. Keep it solid please! What Is Metamorphism? Metamorphism means
More informationClassification of Igneous Rocks
Classification of Igneous Rocks Textures: Glassy- no crystals formed Aphanitic- crystals too small to see by eye Phaneritic- can see the constituent minerals Fine grained- < 1 mm diameter Medium grained-
More informationFeldspars. Structure. The feldspars are by far the most abundant group of minerals and are found in igneous, metamorphic and many sedimentary rocks.
Feldspars The feldspars are by far the most abundant group of minerals and are found in igneous, metamorphic and many sedimentary rocks. Structure Felsdpars are framework silicates where each silica tetrahedra
More informationamphibole PART 3 Pyroxene: augite CHAIN SILICATES
amphibole PART 3 Pyroxene: augite CHAIN SILICATES CHAIN SILICATES = INOSILICATES inos = chains Basic structural group: Si 2 O 6 (each tetrahedra shared two corners) Simple or double chains linked by cations
More informationMetamorphic Rock Origin and Identification
Metamorphic Rock Origin and Identification Geology Laboratory GEOL 101 Lab Ray Rector - Instructor http://www.rockhounds.com/rockshop/rockkey/index.html http://earthsci.org/education/teacher/basicgeol/meta/meta.html
More informationUNIT-3 PETROLOGY QUESTIONS AND ANSWERS 1. What is mean by Rock? It is defined as natural solid massive aggregates of minerals forming the crust of the earth 2. Define Petrology? The branch of geology dealing
More informationName. GEOL.3250 Geology for Engineers Igneous Rocks
Name GEOL.3250 Geology for Engineers Igneous Rocks I. Introduction The bulk of the earth's crust is composed of relatively few minerals. These can be mixed together, however, to give an endless variety
More informationEngineering Geology ECIV 3302
Engineering Geology ECIV 3302 Instructor : Dr. Jehad Hamad 2019-2018 Chapter (7) Metamorphic Rocks Chapter 7 Metamorphism and Metamorphic Rocks Metamorphism The transition of one rock into another by temperatures
More informationUnderstanding Earth Fifth Edition
Understanding Earth Fifth Edition Grotzinger Jordan Press Siever Chapter 6: METAMORPHISM Modification of Rocks by Temperature and Pressure Lecturer: H Mohammadzadeh Assistant professors, Department of
More informationGEOL 3313 Petrology of Igneous and Metamorphic Rocks Study Guide for Final Examination Glen Mattioli
GEOL 3313 Petrology of Igneous and Metamorphic Rocks Study Guide for Final Examination Glen Mattioli Chapter 5: Crystal-Melt phase diagrams Effect of water pressure on feldspar stability Hypersolvus vs.
More informationAPPENDIX 2 Table 2. Sample descriptions
Table 2. descriptions 225 Felsic gneiss, fine-grained and very light-gray. From the upper part of the lower of the two layers, which connect. 226 Amphibolite, even-grained, fine-grained, medium-gray, little
More informationCHAPTER IV PETROGRAPHY
CHAPTER IV PETROGRAPHY IV.1 Introduction : Owing to their complex and hybrid nature, kimberlites display a prominent and typical inequigranular texture wherein large roundedto-anhedral crystals are found
More informationGSA Data Repository
GSA Data Repository 2019057 1 METHODS Grain Boundary Imaging and Orientation Analysis Backscatter electron (BSE) maps of thin sections were acquired using the FEI Verios XHR scanning electron microscope
More informationSupplement of Pinch and swell structures: evidence for strain localisation by brittle viscous behaviour in the middle crust
Supplement of Solid Earth, 6, 1045 1061, 2015 http://www.solid-earth.net/6/1045/2015/ doi:10.5194/se-6-1045-2015-supplement Author(s) 2015. CC Attribution 3.0 License. Supplement of Pinch and swell structures:
More informationLab 4 - Identification of Igneous Rocks
Lab 4 - Identification of Igneous Rocks Page - Introduction A rock is a substance made up of one or more different minerals. Thus an essential part of rock identification is the ability to correctly recognize
More information"When Gregor Samsa woke up one morning from unsettling dreams, he found himself changed into a monstrous bug. Metamorphosis, by Franz Kafka
Metamorphosis "When Gregor Samsa woke up one morning from unsettling dreams, he found himself changed into a monstrous bug. Metamorphosis, by Franz Kafka Metamorphism The transformation of rock by temperature
More informationLab: Metamorphism: minerals, rocks and plate tectonics!
Introduction The Earth s crust is in a constant state of change. For example, plutonic igneous rocks are exposed at the surface through uplift and erosion. Many minerals within igneous rocks are unstable
More informationMICROSTRUCTURAL DEVELOPMENT IN FIRE DAMAGED CONCRETE - A CASE STUDY
MICROSTRUCTURAL DEVELOPMENT IN FIRE DAMAGED CONCRETE - A CASE STUDY V P Chatterjee, S K Chaturvedi, S K Gupta, M Kumar and P S Sharma National Council for Cement and Building Materials, Ballabgarh, Haryana,
More informationEESC 4701: Igneous and Metamorphic Petrology IGNEOUS ROCK CLASSIFICATION LAB 2 HANDOUT
EESC 4701: Igneous and Metamorphic Petrology IGNEOUS ROCK CLASSIFICATION LAB 2 HANDOUT Sources: University of Washington, Texas A&M University, University of Southern Alabama What is an igneous rock (a
More informationSample photos and petrographic descriptions of core samples from the Norwegian continental margin basement
Sample photos and petrographic descriptions of core samples from the Norwegian continental margin basement Appendix 1 Petrophysical and thermal properties of pre-devonian basement rocks on the Norwegian
More informationEvaluating the Intrusion-Related Model for the Archean Low-Grade, High- Tonnage Côté Gold Au(-Cu) Deposit
Evaluating the Intrusion-Related Model for the Archean Low-Grade, High- Tonnage Côté Gold Au(-Cu) Deposit L.R. Katz, D.J. Kontak, Laurentian University, B. Dubé, V. McNicoll, Geological Survey of Canada
More informationFACTS FOR DIAMOND OCCURRENCE IN KIMBERLITES
KIMBERLITES Kimberlite is an ultrabasic olivine-rich igneous rock called peridotite. Peridotites occur at great depths in the earth in a layer called the mantle (100-135 miles below the surface). At this
More informationBlock: Igneous Rocks. From this list, select the terms which answer the following questions.
Geology 12 Name: Mix and Match: Igneous Rocks Refer to the following list. Block: porphyritic volatiles mafic glassy magma mixing concordant discontinuous reaction series igneous vesicular partial melting
More informationEarth Materials II Review Optical Mineralogy and Igneous Minerals
Earth Materials II Review Optical Mineralogy and Igneous Minerals Refractive Index and Angle of Refraction Refractive Index(R. I. ) = velocity of light in a vacuum velocity of light in a medium The refractive
More information23/9/2013 ENGINEERING GEOLOGY. Chapter 2: Rock classification:
ENGINEERING GEOLOGY Chapter 2: Rock classification: ENGINEERING GEOLOGY Chapter 1.0: Introduction to engineering geology Chapter 2.0: Rock classification Igneous rocks Sedimentary rocks Metamorphic rocks
More informationCHAPTER VI CONCLUSIONS
CHAPTER VI CONCLUSIONS In this Chapter, salient observations made in understanding the various tectonothermal events, including U-Pb in-situ monazite geochronology of Sargur schists and granulites exposed
More informationFigure 4.1 Undeformed diabase dike cutting mylonitized gabbro of Shear Zone VII. 44 Figure 4.5 Typical shear zone boundary. Unfoliated gabbro to the left, strongly foliated mylonite
More informationWAMUNYU EDWARD MUREITHI I13/2358/2007
WAMUNYU EDWARD MUREITHI I13/2358/2007 Olkaria geothermal area is situated south of Lake Naivasha on the floor of the southern segment of the Kenya rift. The geology of the Olkaria Geothermal area is subdivided
More informationLAB 9: ULTRAMAFIC ROCKS, CUMULATES AND MELT SOURCES
Geology 316 (Petrology) (03/26/2012) Name LAB 9: ULTRAMAFIC ROCKS, CUMULATES AND MELT SOURCES INTRODUCTION Ultramafic rocks are igneous rocks containing less than 10% felsic minerals (quartz + feldspars
More informationLab 6: Metamorphic Rocks
Introduction The Earth s crust is in a constant state of change. For example, plutonic igneous rocks are exposed at the surface through uplift and erosion. Many minerals within igneous rocks are unstable
More informationLab 3 - Identification of Igneous Rocks
Lab 3 - Identification of Igneous Rocks Page - 1 Introduction A rock is a substance made up of one or more different minerals. Thus an essential part of rock identification is the ability to correctly
More information