Ref No: NITP/Proc/CHEM/15-16/14 Date: Sub: Procurement of equipments, reagents and glassware for B.Tech lab. of Chemistry Dept., NIT Patna.

Transcription

1 NATIONAL INSTITUTE OF TECHNOLOGY PATNA (An Institute under Ministry of HRD, Govt. of India) ASHOK RAJPATH, PATNA (BIHAR) Ph ,37715,37199 Fax Website- Ref No: NITP/Proc/CHEM/15-16/14 Date: Sub: Procurement of equipments, reagents and glassware for B.Tech lab. of Chemistry Dept., NIT Patna. National Institute of Technology Patna, an Institute of National Importance, invites sealed tenders from reputed Original Equipment Manufacturers / Authorised Dealers / Bidders for quality Procurement of equipments, reagents and glassware for B.Tech lab. of Chemistry Dept., NIT Patna. All interested tenderers are requested to send their sealed quotation as per technical specifications in Annexure I (a) & (b) and price bid as per Annexure-III (a) or (b) (under two bid system). For general terms & conditions, instructions to bidders etc. please refer Annexure- II. Tender will be accepted by upto 5 p.m. Detailed descriptions of the item and instructions for submitting your offer can be downloaded from our website However, a cross Demand Draft of Rs. 1000/- (Non-refundable) towards Tender Fee and Rs.1,000/- (Refundable) towards EMD in favour of the Registrar, NIT Patna payable at Patna should be submitted in a separate sealed envelope along with your quotation. The proposals must be sent in two separate sealed envelopes (Technical Bid and Price Bid) duly subscribed with Reference number and Tender Notice details as appended hereunder:- TENDER FOR SUPPLY OF equipments, reagents and glassware for B.Tech lab. of Chemistry Dept., NIT Patna. TENDER REF NO: - NITP/Proc./CHEM/15-16/14, DATED , LAST DATE FOR SUBMISSION UPTO 5 PM. To, The Registrar National Institute of Technology Patna Bihar, INDIA From: M/s Address: Contact No.: ID: The price bid will be opened only of those firms, who will be found technically qualified after evaluation of their technical bids. The technical bids will be opened on at 03:00 PM, in the office/department at NIT Patna, in the presence of the Bidders/Vendors or their authorized representative who wish to be present. Page 1/15 Registrar

2 A. Equipments DETAILED SPECIFICATIONS Annexure I (a) Sl Name of Item Specification Qty No. 1. Water bath with multiple holes Temperature control: r.t. 90 C (approx.) The lid/top cover of the bath contains multiple holes (6 1 holes) made out of heavy gauge with concentric rings.. Vacuum pump Oil free, 0V/50 Hz. Max. vacuum: 7 Hg Max Pressure: 35 Psi (approx). 3. ph meter cum potentiometer Measures ph & mv with high stability and accuracy. Temperature readout is necessary. Auto/Manual Temperature Compensation Facility. Auto or 3 points buffer calibration LED display: simultaneous for ph (or mv) and temperature 4. Kipp's Apparatus Made of polypropylene and has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the apparatus. H S gas thus evolved is collected in the middle dome from where it can be released through a leak proof stopcock fitted with a self lubricating PTEE plug. 5. Digital balance Capacity : gm, Readability : 0.01 gm, Repeatability : 0.01gm, LED display, Auto calibration with external weight Auto zero tracking Overload protection Adjustable feat 6. Hot air oven (1x1x1) 7. Double distilled water system Size: 18 x 18 x 18 inches (approx). Double walled: anodized aluminium/stainless steel, outside steel sheet. Temperature is controlled by thermostat upto 50 C (approx.). Air circulating fan, Digital temperature controller and indicator. Work with 0/30 volts A.C. Automatic Electrically heated all glass Distillation Apparatus. Complete with metallic stand, plug, board etc. Borosilicate glasses. Double distillation contains: Double stage having flask of capacity 3 lit. Double stage having flask of cap. 5lit. Automatic cut-off devic 1 1 Page /15

3 8. Heating plate Digital Hot Plate is apt for continuous heating up to 300 C. Body of the Plate is made of M.S. sheet painted with powder coated insulated elements. Capacity 5L. 9 Melting point instrument B. Reagents* For determination of melting points upto 350 C. Mounted block illuminated from below by a lamp fixed in its housing and must accept three capillary tubes and mercury thermometer. An energy regulator fitted to the unit must be present to control the temperature. Sl. Name of chemicals Specification Quantity No. 1 Liquid ammonia A. R. Reagent 5 L Ammonium chloride A. R. Reagent 1 Kg 3 Borax A. R. Reagent 1 Kg 4 Hydrochloric acid (Conc.) A. R. Reagent 5 L 5 Calcium hydroxide A. R. Reagent 1 Kg 6 Litmus paper (blue and red) A. R. Reagent boxes 7 Sodium carbonate A. R. Reagent 1 Kg 8 Sodium hydroxide A. R. Reagent 1 Kg 9 Mercury (I) nitrate paper A. R. Reagent 50 g 10 Nessler s reagent A. R. Reagent 50 ml 11 Copper turnings A. R. Reagent 500 g 1 Manganese(IV) oxide A. R. Reagent 50 g 13 Sodium nitroprusside A. R. Reagent 100 g 14 Potassium permanganate A. R. Reagent 1 Kg 15 Nitric acid (Conc.) A. R. Reagent 5 L 16 Silver nitrate A. R. Reagent 5 g 17 Mercurous (I) Chloride A. R. Reagent 100 g 18 Lead acetate A. R. Reagent 500 g 19 Anhydrous Ferric chloride A. R. Reagent 500 g 0 Copper sulphate A. R. Reagent 500 g 1 Sodium thiosulphate A. R. Reagent Kg Starch A. R. Reagent 500 g 3 Potassium iodide A. R. Reagent 100 g 4 Potassium dichromate, AR A. R. Reagent 1 Kg 5 Sulphuric acid A. R. Reagent 5 L 6 Ferrous ammonium sulphate A. R. Reagent 1 Kg 7 Phosphoric acid A. R. Reagent L 9 Oxalic acid A. R. Reagent 1 Kg 30 Eriochrome Black-T A. R. Reagent 100 ml 31 Disodium EDTA A. R. Reagent 500 gx6 3 Buffer (aq. ammonia and ammonium 1 L chloride) A. R. Reagent 33 Calcium chloride A. R. Reagent 50 g 34 Phenolphthalein indicator A. R. Reagent 15 mlx5 35 Methyl orange indicator A. R. Reagent 5 mlx10 36 Sodium hypochlorite A. R. Reagent L 38 Ferrous sulphate A. R. Reagent 500 g 39 Barium chloride A. R. Reagent 50 g 40 Methanol A. R. Reagent 5 L 41 Ethanol A. R. Reagent 5 L 4 Urea A. R. Reagent 500 g Page 3/15

4 43 Chromyl chloride A. R. Reagent 5 g 44 Glacial acetic acid A. R. Reagent 5 L 45 Chromium (III) nitrate A. R. Reagent 50 g 46 Copper (II) chloride A. R. Reagent 50 g 47 Sodium chloride A. R. Reagent 50 g 48 Sodium sulphate, anhydrous A. R. Reagent 100 g 49 Barium sulphate A. R. Reagent 100 g 50 Potassium chloride A. R. Reagent 50 g 51 Lead (II) chloride A. R. Reagent 50 g 5 Mercury (II) sulphate A. R. Reagent 100 g 53 Sodium sulphite A. R. Reagent 100 g 54 Magnesium carbonate A. R. Reagent 100 g 55 Magnesium fluoride A. R. Reagent 50 g 56 Antimony (III) chloride A. R. Reagent 100 g 57 Zinc chloride A. R. Reagent 50 g 58 Calcium carbonate A. R. Reagent 50 g 59 Sodium arsenate A. R. Reagent 100 g 60 Sodium phosphate A. R. Reagent 100 g 61 Cobalt (II) chloride A. R. Reagent 100 g 6 Manganese (II) chloride A. R. Reagent 50 g 63 Nickel (II) chloride A. R. Reagent 100 g 64 Distilled water A. R. Reagent 5 Lx10 65 dl-alanine A. R. Reagent 5 g 66 l-leucine A. R. Reagent 5 g 67 l-lysine A. R. Reagent 5 g 68 n-butanol A. R. Reagent 500 ml 69 Ethyl acetate A. R. Reagent 500 ml 70 Ninhydrin A. R. Reagent 15 ml 71 Silica gel A. R. Reagent 500 g X 3 7 Salicylic Acid A. R. Reagent 50 g 73 Acetic Anhydride A. R. Reagent 50 ml X 74 p-aminophenol A. R. Reagent 100 g X 3 *Only Chemicals/Reagents from Merck, SD Fine Chemicals, Alfa Aecar, Acros etc. Other cheap, local made chemicals and China-made products are not allowed. C. Glassware* Sl. No Items Specification Quantity 1. Condenser, Coiled Dist. type B-4/9-450mm 3 Round Bottom B-4/9(50ml) 5 Flask, interchangeable joint B-4/9(100ml) Watch Glass 100mm mm Beaker ( Graduated), with spout 1000ml 500ml 0 50ml ml 80 50ml Conical Flask (Graduated) 100ml 80 50ml 30 50ml 40 6 Conical Flask (Graduated) with stopper 500ml 10 Page 4/15

5 50 ml Measuring Cylinder, with spout 500ml 50ml 100ml Filter apparatus with filter flask, Buchner funnel, bolt neck flask with tubing and cone(g4) 50ml 10 10ml 10 50ml ml 3 9. Test tubes 16 x (O.D x length) 10. Dropper 10 ml Pipette (Graduated) 10 ml Pipette 5ml 0 0 ml 5 10ml 0 5ml Burette, Screw Thread stopcock 50ml, with PTFE Stopcock 5 Volummetric flask with interchangeable 1000ml 14. stopper 500ml 5 50ml 0 100ml 0 50ml Burette clamp Single (One pack 6 16 Glass bottles with stopper contains 6) 1000ml ml 10 50ml 0 15ml 0 60 ml 5 17 Graduated pipette 10ml 1 18 Graduated pipette 5ml 1 19 Funnel 50mm 4 0 Funnel 100mm 4 1 Desiccators L Vacuum Desiccators with stop cock and PTFE spindle L 1 3 Solvent bottles with pipe (Fibre) Test tube stand 10 multiple hole 4 5 Holding tongs 36 6 Glass rod 10 inches 36 7 Filter paper (Whatmann) round 5 boxes 8 Filter paper round 10 boxes 9 Ignition tube -- 5 boxes 30 Platinum wire Glass vial 10 ml 50 3 Latex Gloves -- 5 Boxes 33 Thermometer with Adjustable PTFE Cone 0 o to 50 o C 10 *All glassware should be made of borosilicate glass (TM: BOROSIL) Page 5/15

6 Para of Tender Enquiry Specification FORMAT OF COMPLIANCE STATEMENT Specification of Equipment Offered Compliance to Tender specification whether yes or no (if yes indicate the page no and Put a Flag also highlight the matching specification) Annexure I (b) In case of noncompliance deviation from Tender specification to be indicated in unambiguous term * The compliance certificate along with the page no indication (i.e. required spec and availability of the page in the entire tender documents by flagging or giving page no) must be submitted with the bid for evaluation. Firm not submitting the model/spec and their details availability in the bid documents by flagging/page no may not be considered for evaluation. Page 6/15

7 Annexure - II NOTE: The bid documents are not transferable and the firm s seal and signature of the authorized official must appear on all papers and envelopes submitted. Two/Double Bids:- INSTRUCTION TO BIDDERS: 01. In case of two-bid system, tenders will have to be submitted in TWO PARTS i.e. (a) Technical Bid and (b) Price Bid, in two separate properly sealed covers indicating the type of Bid; and both these covers will have to be again put in to a single sealed cover. Also the address of the firm submitting the tender and the officer, to whom the tender is addressed, must appear distinctly on both the inner sealed covers, indicating also TECHNICAL BID / PRICE BID as may be applicable. 0. In the part relating to Technical Bid, the OEM/Vendor must provide the followings:- (a) Details of the technical features of the offered Equipment vis-à-vis specification as per Annexure I; (b) Standard Technical literature on each of the items offered; the article on offer should conform to standard quality, specification and test of manufacturer; (c) Dealership certificate on the offered products from OEM in case of dealer/s; (d) List of reputed organizations/institutions, where similar orders have been executed (copies of the purchase/work order will have to be enclosed). The bidders / OEM should attach a self declaration stating that he is not banned / debarred from working with any Central Government / PSU / State Govt of India / Any other Govt. Agencies or any Institute of National / International importance. (e) Up-to-date Sales Tax clearance certificate (for vendors outside the State of Bihar)/VAT registration certificate indicating also the TIN number (for vendors from within the State of Bihar) of the FIRM will have to accompany the tender to be submitted; (f) Copy of PAN must be submitted of FIRM / Bidder along with the Technical Bid; (g) Banker s details of tendering FIRM / Bidder should be clearly mentioned; (h) Details of nature and maximum period of Warranty offered by the OEM/Bidder; (i) Amount of Earnest Money Deposited (EMD), in the form of Demand Draft/PBG only, will have to be clearly stated and the same will have to be enclosed with Technical Bid only; (j) A copy of the Price bid, WITHOUT MENTIONING THE PRICES, will have to be provided as part of the Technical Bid document. Page 7/15

8 03. In the part relating to Price Bid, the OEM/Vendor must provide the following:- (a) Quantity, basic price (against item-wise details of specifications of each of the offered items); (b) Prices of each of the optional accessories, as required by specifications and may be relevant for offered Equipment, will have to be specifically stated in the quotation: (c) Central / Sales Tax/ VAT (as percentage of basic price + packing & forwarding charges if any) (d) Installation & commissioning charge (including Service Tax), to be shown item-wise extra, if any. (e) Freight & insurance charge, if any. (g) Annual Maintenance contract (AMC) rate (after expiry of warranty period) is to be clearly indicated preferably in both comprehensive and noncomprehensive terms, failure to which the offer may not be considered even if it turns out at the lowest price. Terms & Conditions:- 01. Rates: Rates quoted should be on F.O.R., NIT Patna, on Door Delivery basis. 0. Validity: Quoted rates must valid for 180 days. 03. Warranty/Guarantee: The material must be quoted with a minimum comprehensive Warranty / Guarantee period of 36 months after the date of delivery and acceptance at final destination. 04. EMD: In form of DD/PBG in favour of Registrar, NIT Patna payable at Patna. 05. Delivery: Unless otherwise stated delivery of goods at NIT Patna, will have to be maximum within 30 days from the date of receipt of the Purchase Order. All aspects of safe delivery shall be the exclusive responsibility of the OEM / Bidder. 06. Rate of AMC: Annual Maintenance Contract charges (after expiry of warranty period) is to be clearly Indicated (for Equipment only) & applicable taxes. The selected supplier/s is to ensure regular availability of spares for at least five years. 07. Printed conditions of supply of the firm, if any, will not be binding on us. 08. Late and delayed Tenders: Late and delayed tender will not be considered. In case any unscheduled holiday occurs on prescribed closing/opening date the next working day shall be the prescribed date of closing/opening. Page 8/15

9 09. Ground for Rejection of Tender: The tenders are liable to be rejected if the fore going conditions are not complied with. The tender should be complete in all respects and duly signed wherever required. Incomplete and unsigned offer will not be accepted. 10. Payment Terms:- 100% payment will be released after receiving of stores in good order and condition and successful installation and commissioning duly certified by the concern authority. Successful vendor should arrange to submit a Performance Bank Guarantee or Demand Draft to the tune of 10% amount of the total purchase value within 15 days from receipt of P.O. This Performance Bank guarantee should be issued from any Nationalized Bank and validity of the same will be till warranty period +60 days from the date of delivery / installation of the material. The payment will made by RTGS / FUND Transfer mode only. Hence, following information must be clearly written in the Price Bid for RTGS / FUND TRANSFER: (a) Name of the Firm with complete postal address and phone details (b) Name of the Bank with Branch where the Account exist (c) IFSC CODE (d) ACCOUNT No (e) PAN No (f) VAT/TIN No (Required from the vendors belongs to BIHAR) 11. Excise Duty: The Institute is exempted from payment of Central Excise Duty vide GOI Notification No.10/97-Central Excise, dated with Regn No. TU/V/RG-CDE(111)/015, dated TDS as applicable will be deducted from bill. 13. Entry Tax: Entry tax, if applicable will be borne by us as applicable on FOR NITP value. Road permit once issued will not change / altered in any circumstances. If any alteration is required due to fault from vendor/oem side the same will be debited to supplier s A/c 14. Liquidated Damage: If a firm accepts an order and fails to execute the order in full as per the terms and conditions stipulated therein, it will be open to this institute to recover liquidated damages from the firm at the rate of 1% per week of the order value subject to a maximum of 10% of the order value. It will also be open to this institute alternatively, to arrange procurement of the required stores from any other source at the risk and expense of the firm, which accepted the order but failed to execute the order according to stipulated agreed upon. 15. Termination for default: Default is said to have occurred:- (a) If the supplier fails to deliver any or all of the services within the time period(s) specified in the purchase order or any extension thereof granted by NIT Patna. Page 9/15

10 (b)if the supplier fails to perform any other obligation(s) under the contract (c) If the vendor, in either of the above circumstances, does not take remedial steps within a period of 30 days after receipt of the default notice from NIT Patna (or takes longer period in-spite of what NIT Patna may authorize in writing), NIT Patna may terminate the contract / purchase order in completely or in part and forfeit the EMD. In addition to above, NIT Patna may at its discretion also take the following actions: NIT Patna may procure, upon such terms and in such manner, as it deems appropriate, goods similar to the undelivered items/products and the defaulting supplier shall be liable to compensate NIT Patna for any extra expenditure involved towards goods and services to complete the scope of. 16. Applicable Law: (a)the contract shall be governed by the laws and procedures established by Govt. of India, within the framework of applicable legislation and enactment made from time to time concerning such commercial dealings/processing. (b) All disputes are subject to exclusive jurisdiction of Competent Court and Forum in Patna, India only. (c) Any dispute arising out of this purchase shall be referred to the Registrar NIT Patna, and if either of the parties hereto is dissatisfied with the decision, the dispute shall be referred to the decision of an Arbitrator, who should be acceptable to both the parties, to be appointed by the Director of the Institute. The decision of such Arbitrator shall be final and binding on both the parties. 17. The acceptance of the quotation will rest solely with the Registrar, NIT Patna, who in the interest of the Institute is not bound to accept the lowest quotation and reserves the right to himself to reject or partially accept any or all the quotations received without assigning any reasons. 18. Important:- The Director may accept or reject any or all the bids in part of in full without assigning any reason and doesn t bind himself to accept the lower bid. The institute at its discretion may change the quantity / upgrade the criteria / drop any item or thereof at any time before placing the Purchase Order. ADDITIONAL TERMS FOR IMPORTED GOODS Following terms besides the fore mentioned terms will be applicable in case of foreign purchases: 01. Rates: Quoted rates should be in FCA/FOB terms and charges to be stated in the following break- (a) Ex-works value (b) + Documentation & Handling Charge, if any (c) Total FOB/FCA value. Page 10/15

11 0. After Sales Service: In case of imported items, foreign manufacturing firms should indicate facilities available for after sales service, detail address and contact number of their local representative in India without which their offers are liable to be ignored. 03. Delivery: (a) Delivery of goods at NIT Patna, will have to be maximum within 30 (thirty) days from the date of receipt of the Purchase Order. (b) Delivery at Kolkata/Delhi Airport only: As we do not have clearing agent in any other Airport, delivery is to be made only at Kolkata through our freight forwarder. (c) While trans shipment will be allowed, part shipment will not be allowed. 04. Payment: (i) Payment by an irrevocable letter of Credit (90% against delivery and rest 10% after successful installation of the Equipment) at FOB/FCA value nonnegotiable through any overseas branch of State Bank of India with unrestricted provision. All bank charges inside India will be borne by NIT Patna and outside India will be to supplier s A/c. OR (ii) 100% Payment Basis: 100% payment by TT Swift / DD against delivery and installation will be made. In this case, on receipt of your Order Acknowledgement and document (i.e. AWB and MWB) through our freight & forwarder payment will be made for total ordered value. Note: Please note LC will not be opened unless and until Letter of Acknowledgement in original is received at NIT Patna, directly from the principal (Even in case of firms having subsidiary office in India). The Indian agents are therefore advised to submit quotation after consultation with their respective principals). 05. Customs Duty: The Institute is exempted from payment of Customs Duty vide GOI Notification No.51/96-Customs, dated , with Regn. No. TU/V/RG- CDE(111)/015, dated [CUSTOMS DUTY EXEMPTION CERTIFICATE WILL BE MADE AVAILABLE BY THE INSTITUTE IN REGARD TO QUOTES IN FOREIGN CURRENCY ONLY [NOT AGAINST QUOTES MADE BY A FIRM IN INDIAN CURRENCY, UNLESS THE CONCERNED FIRM IS A FOREIGN HOLDING COMPANY WITH `FDI CERTIFICATE ISSUED BY THE MINISTRY OF FINANCE, GOVT. OF INDIA]. 06. Agency Commission: The percentage of ex-works value to be paid to Indian agent in equivalent Indian currency as agency commission as applicable will have to be clearly stated in the quotation wherever applicable. Page 11/15

12 07. Country of Origin: While Country of Origin Certificate will not be insisted, the same however will have to be stated in the Original Invoice for payment through LC. 08. LC Amendment: LC amendment charges due to mistake on the part of the supplier, if any, will have to be borne by the supplier. 09. Others: Institute is also ready to purchase the goods on High Sea Sale Basis agreement. In this, Institute will provide all assistance to supplier and supplier will Import the goods on behalf of NIT Patna and payment will be done in Rupees against delivery like Indigenous purchase. Registrar Page 1/15

13 Annexure III (a) TENDER FORMAT FOR INDEGENOUS SUPPLIES (For Price Bid only) Ref No: NITP/Proc/CHEM/15-16/14 Date: Sl No. Description of Item & Model Quantity Unit Price Sales Tax Total Price Delivery Mode: F.O.R. Patna. Total bid price should be inclusive of Sales Tax, F.O.R. NIT Patna for the above quoted items is Rs. Delivery Period: Packaging & Freight etc. extra: Validity Date: Minimum 180 days from the date of opening of tender. Any other terms and conditions. Place: Date: Signature: Name: Business Address: Contact No: Affix Rubber Stamp Page 13/15

14 Annexure III (b) TENDER FORMAT FOR FOREIGN SUPPLIES (For Price Bid only) Ref No: NITP/Proc/15-16/CHEM/14 Date: Sl No Description of Item & Model Quantity Unit Price on F.O.B/ FCA International Airport Total Price, International Airport Country of Origin Indian Agent Commission Rs. Note: FOB/FCA price from international airport. Indian Agent s commission if not included in the FOB/FCA price will be paid in Indian Rupees separately. (In case no agent is involved, please write clearly) Delivery Period: Packaging & Freight etc. extra: Total bid price for the above quoted items is Rs. Any other terms and conditions Place: Date: Signature: Name: Business Address: Contact No: Affix Rubber Stamp Page 14/15

15 NATIONAL INSTITUTE OF TECHNOLOGY PATNA (PROCUREMENT DEPARTMENT) SCHEDULE Schedule for Procurement of equipments, reagents and glassware for B.Tech lab. of Chemistry Dept., NIT Patna. Tender Reference No: Ref No: NITP/Proc/CHEM/15-16/14 Date: Last Date for Submission of Quotation : Opening Date and Time of Quotation : at 3 p.m. For Any Enquiry Please Contact: The Registrar NIT Patna registrar@nitp.ac.in Page 15/15