Test Report. Report No. SCL03H Page 1 of 7

Transcription

1 Report No. SCL03H Page 1 of 7 Applicant FOSHAN BLUEROCKET ELECTRONICS CO.,LTD Address NO.45 GUXIN ROAD, CHANCHENG DISTRICT, FOSHAN, GUANGDONG, P.R.C. The following sample(s) and sample information was/were submitted and identified by/on the behalf of the client Sample Name MBF Semiconductor Device(Halogen Free) Sample Received Date Aug. 5, 2015 Testing Period Aug. 5, 2015 to Aug. 10, 2015 Test Requested 1.As specified by client, for the sample 1, to test Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent Chromium(Cr(VI)), Polybrominated Biphenyl(PBBs), Polybrominated Diphenyl Ethers(PBDEs), Phthalates(DBP, BBP, DEHP, DIBP), Fluorine(F), Chlorine(Cl), Bromine(Br), Iodine(I) in the submitted sample(s); 2.As specified by client, for the sample 2, to test the Lead(Pb), Cadmium(Cd), Mercury(Hg), Hexavalent Chromium(Cr(Ⅵ)) in the submitted sample. Test Method Please refer to the following page(s) Test Result(s) Please refer to the following page(s) Tested by Reviewed by Approved by Date Aug. 10, 2015 Qinghong Wan Technical Manager No. R Centre Testing International Group Co.,Ltd. Shunde Branch 9/F., Yongying Building, Section 2, No.8, East of Rongqi Avenue, Ronggui, Shunde District, Foshan, Guangdong, China

2 Report No. SCL03H Page 2 of 7 ****************************************************************************************************************************************************** Conclusion Tested Sample According to directive Result Submitted Sample RoHS Directive 2011/65/EU with amendment (EU) 2015/863 Pass ****************************************************************************************************************************************************** Pass means that the results shown on the report comply with the limits set by RoHS Directive 2011/65/EU with amendment (EU) 2015/863. Test Method Test Method Measured Equipment(s) Lead (Pb) IEC :2013 Ed.1.0 ICP-OES Cadmium (Cd) IEC :2013 Ed.1.0 ICP-OES Mercury (Hg) IEC :2013 Ed.1.0 ICP-OES Hexavalent Chromium (Cr(Ⅵ)) IEC 62321:2008 Ed.1 Annex C IEC 62321:2008 Ed.1 Annex B UV-Vis Polybrominated Biphenyls (PBBs) IEC 62321:2008 Ed.1 Annex A GC-MS Polybrominated Diphenyl Ethers (PBDEs) IEC 62321:2008 Ed.1 Annex A GC-MS Phthalates(DBP, BBP, DEHP, DIBP) Refer to EN 14372:2004(E) GC-MS Fluorine (F) Refer to BS EN 14582:2007 IC Chlorine (Cl) Refer to BS EN 14582:2007 IC Bromine (Br) Refer to BS EN 14582:2007 IC Iodine (I) Refer to BS EN 14582:2007 IC Test Result(s) Result (mg/kg) 2 MDL Limit Lead (Pb) N.D. 2 mg/kg 1000 mg/kg Cadmium (Cd) N.D. 2 mg/kg 100 mg/kg Mercury (Hg) N.D. 2 mg/kg 1000 mg/kg Hexavalent Chromium (Cr(VI)) Negative / 1000 mg/kg

3 Report No. SCL03H Page 3 of 7 Test Result(s) Result (mg/kg) 1 MDL Limit Lead (Pb) # 2 mg/kg 1000 mg/kg Cadmium (Cd) N.D. 2 mg/kg 100 mg/kg Mercury (Hg) N.D. 2 mg/kg 1000 mg/kg Hexavalent Chromium (Cr(VI)) N.D. 2 mg/kg 1000 mg/kg Polybrominated Biphenyls(PBBs) Monobromobiphenyl N.D. 5 mg/kg Dibromobiphenyl N.D. 5 mg/kg Tribromobiphenyl N.D. 5 mg/kg Tetrabromobiphenyl N.D. 5 mg/kg Pentabromobiphenyl N.D. 5 mg/kg Hexabromobiphenyl N.D. 5 mg/kg 1000 mg/kg Heptabromobiphenyl N.D. 5 mg/kg Octabromobiphenyl N.D. 5 mg/kg Nonabromobiphenyl N.D. 5 mg/kg Decabromobiphenyl N.D. 5 mg/kg Polybrominated Diphenyl Ethers(PBDEs) Monobromodiphenyl ether N.D. 5 mg/kg Dibromodiphenyl ether N.D. 5 mg/kg Tribromodiphenyl ether N.D. 5 mg/kg Tetrabromodiphenyl ether N.D. 5 mg/kg Pentabromodiphenyl ether N.D. 5 mg/kg Hexabromodiphenyl ether N.D. 5 mg/kg 1000 mg/kg Heptabromodiphenyl ether N.D. 5 mg/kg Octabromodiphenyl ether N.D. 5 mg/kg Nonabromodiphenyl ether N.D. 5 mg/kg Decabromodiphenyl ether N.D. 5 mg/kg

4 Report No. SCL03H Page 4 of 7 Result 1 MDL Limit Phthalates Dibutyl phthalate(dbp) CAS#: N.D. 50 mg/kg 1000 mg/kg Benzylbutyl phthalate(bbp) CAS#: N.D. 50 mg/kg 1000 mg/kg Di-2-ethylhexyl phthalate(dehp) CAS#: N.D. 50 mg/kg 1000 mg/kg Diisobutyl phthalate(dibp) CAS#: N.D. 50 mg/kg 1000 mg/kg Result 1 MDL Halogen(s) Fluorine (F) N.D. 10 mg/kg Chlorine (Cl) N.D. 10 mg/kg Bromine (Br) N.D. 10 mg/kg Iodine (I) N.D. 10 mg/kg Tested Sample/Part Description 1. Black body(tested as a whole) 2. Silvery metal Remark: 1.The sample had been dissolved totally tested for Lead, Cadmium, Mercury. 2.The sample 1 was tested as a whole, because it's impossible to disassemble or separate it by current equipment and technology. The result(s) shown on this report may be different from the content of any homogeneous material. -MDL = Method Detection Limit -N.D. = Not Detected (<MDL ) -mg/kg = ppm = parts per million -Negative = Absence of Cr(Ⅵ), the detected Cr(Ⅵ) concentration in the boiling waterextraction solution is less than 0.02 mg/kg with 50cm 2 sample surface area used. - # : According to the client s statement, the material of the sample(s) fall into exemption items 7(a) according to EU Directive 2011/65/EU: Lead in high melting temperature type solders(i.e. lead-based alloys containing 85% by weight of more lead).

5 Report No. SCL03H Page 5 of 7 Test Process 1.Lead(Pb), Cadmium(Cd) Weigh sample and place it in a vessel Add digestion reagent Digest the sample Analyzed by Dry Ashing/ Alkali Fusion/ Acid Dissolution Residue Filtration ICP-OES deionized water Solution 2.Mercury(Hg) Weigh sample and place it in a microwave digestion vessel Add digestion reagent Digest sample in microwave digestion oven Analyzed by Dry Ashing/ Alkali Fusion/ Acid Dissolution Residue Filtration ICP-OES deionized water Solution 3. Hexavalent Chromium (Cr(Ⅵ)) (1) IEC 62321:2008 Ed.1 Annex C Weigh sample and place it in a conical flask Add digestion solution Heat at for 3 hours Add test solution Adjust the ph value of the solution Cool and filter Adjust the ph value of the solution deionized water Analyzed by UV-Vis

6 Report No. SCL03H Page 6 of 7 (2) IEC 62321:2008 Ed.1 Annex B Take a portion of the sample Extraction with boiling water Filter and remove the sample Analyzed by UV-Vis Add test solution Adjust the ph value of the solution 4. Polybrominated Biphenyl(PBBs) and Polybrominated Diphenyl Ethers (PBDEs), Phthalates(DBP, BBP, DEHP, DIBP) Weigh sample and place it in a thimble Extracted with organic solvent Concentrate the extract Analyzed by GC-MS organic solvent Transfer the extract into a volumetric flask 5. Bromine(Br), Chlorine(Cl), Fluorine(F), Iodine(I) Weigh and place sample in a sample cup of bomb Fill the bomb with oxygen Combust the sample in oxygen bomb Analyzed by IC ultra-purity water Transfer the sample solution into a volumetric flask

7 Report No. SCL03H Page 7 of 7 Photo(s) of the sample(s) (1) (2) *** End of report *** The test report is effective only with both signature and specialized stamp. The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CTI, this report can t be reproduced except in full.