Lab 5: Rotational Motion II
|
|
- Brenda Thompson
- 6 years ago
- Views:
Transcription
1 Lab 5: Rotational Motion II Written October-November 1986 by Nancy Bronder '86, Tom Budka '89, Bob Hamwey GS, D. Mook revised by Mook, K. Muenchinger '93 and E. Pleger '94 July-November 1991 and by Melissa Wafer '95 May-June revised Thorstensen 1995 As you are probably well aware, rotational dynamics can be one of the most difficult parts of introductory mechanics. The behavior of rotating systems can defy intuition. The mathematics behind them involves vector cross products, so you cannot avoid working in three dimensions, and it's difficult to draw three dimensions on a flat piece of paper. The following exercises have been created to give you practice at applying the difficult concepts behind rotational mechanics to systems that you can really play with. The central intent of this laboratory is to provide you with an opportunity to predict the behavior of rotating systems using your knowledge of rotational dynamics and then to check to see if your predictions are correct. Suggested Reading: You may want to consult pages 80 to 81 of the book The Way Things Work (on reserve in Kresge Library) before coming to this laboratory session. Other students have found these pages to be worthwhile reading. GOAL: For you to use your knowledge about rotational systems to predict their behavior and to then play with them until you are comfortable explaining why they behave the way they do. PART 1: THE GYROSCOPE Start the gyroscope spinning using the motor provided. Position the gyroscope frame so that the rotation axis is horizontal. To represent the gyroscope's motion in your notebook, draw a picture like this:
2 where the vertical oval represents the wheel of the gyroscope and the horizontal line represents the rotation axis. A. Draw the suggested representation of the gyroscope in your notebook and show which way the wheel is spinning. Then put an arrowhead on the axis to indicate the direction of the angular momentum vector. How do you know this is the correct direction for the angular momentum? B. Next imagine that you apply a force to the rotation axis by tipping the end with the arrowhead either upward or downward, which will generate a torque. Draw that imaginary force on another diagram of the gyroscope and predict the direction of the torque that will result. (Hint: Draw the position vector of the point at which the force is applied.) From your predicted torque predict how the axis of the gyroscope will move in response to the applied force. What is your reasoning behind this prediction? C. Now we are going to work backwards and do the opposite of what we did in the previous part. Figure out how you would make the end of the rotation axis with the arrowhead point upward by applying a torque to the gyroscope. (You can do this by gently rotating the base.) Draw another diagram that shows what you would do, and explain why it should work. D. Now go back and test your predictions in parts B and C. Do they work? Comment on any misconceptions you may have had and any realizations you may have made. Play with the gyroscope until you feel comfortable predicting in which direction the gyroscope will move for any given applied force. Record any observations you make or conclusions you draw in your notebook. Now on to BIGGER things... In class you saw a large gyroscope made from a bicycle wheel used to demonstrate the effect of torque on a rotating object. E. Start this large gyroscope rotating with its axis horizontal. Now hang a mass from one end of its axis and observe the result. Draw a diagram in your notebook and explain how the behavior of the gyroscope is consistent with Newton's Second Law for rotational motion. F. Why is the rim of the bicycle wheel in the large gyroscope loaded with lead? What is term used to describe the effect that the lead has and what does it mean? G. Why does it take a greater torque to change the rotation rate of the large gyroscope than to change the rotation rate of the small gyroscope? Use an equation in your explanation.
3 PART 2: ROTATING STOOL One lab partner needs to sit on the rotatable stool while holding a rotating bicycle wheel by one end of the axle. Hold on tightly! A. Start by holding the axle horizontally and note whether it is spinning clockwise or counterclockwise. Indicate the direction in a picture and draw the angular momentum vector. Does the person on the stool feel anything unusual while holding the spinning wheel? B. In a moment you are going to be asked to exert forces to change the wheel's axle to a vertical orientation. What, if anything, do you think might happen? C. Now go ahead and do it. What happens? What do you feel? Why does this happen? Explain in words and draw a diagram showing the applied force, the position vector to the point at which the force is applied, the resulting torque and the change in angular momentum. (Hint: Be aware of exactly where the force is applied - at what point does the thing exerting the force and the thing feeling the force meet? Between the wheel and the axle, the axle and your hands, your hands and your arms, your arms and your shoulders? This will help you determine the position vector.) Be sure that you take your turn as the person holding the rotating bicycle wheel on the stool. Notice what you feel when you exert a force on the axle of the rotating wheel. D. Have you ever watched an ice skater spinning in circles? Next time you do, watch his or her arms. Ice skaters use their arms when they turn, either extending them outward or pulling them in towards their bodies. What effect do you think this has on their turns? E. Now start a person rotating on the stool while holding a mass in each hand with arms fully extended. To the spinning student: Pull in your arms so that your hands (still holding the masses) are right next to your body. What happens? What do you feel? F. To the stationary student: Use a stopwatch to determine the angular velocity with which the person is initially rotating. Then determine the spinning student's new angular velocity. Use your measurements to estimate the percentage change in the moment of inertia of the person and masses when she/he pulled in her/his hands. Be sure that you take your turn as the person holding the masses on the stool. Notice what you feel when you pull in your arms.
4 PART 3: THE YO-YO A. Wind up a yo-yo and place it on the table so that the string leaves the axis of the yo-yo from a point on the axis between the table and the center of the yo-yo, as shown below: Place the yo-yo in front of you so that it can roll towards you or away from you. Make sure that the string comes out from underneath the axis towards you. What do you think will happen when you pull the string gently towards you? B. Now try it. Does the yo-yo roll towards you or away from you? What is the approximate angle f between the string and the table? Try several different angles and record your data in a table. Is there some "critical angle" at which the yo-yo does not roll at all? Try to figure out what this angle is. string φ parallel to table Table surface C. Draw a free-body diagram of the yo-yo while it is stationary. What tells you that it has the potential to rotate?
5 D. Draw and label three diagrams of the yo-yo like the one above, one for each of the following situations: 1) it rolls forward, 2) it does not roll, 3) it rolls backward. Draw the string at an appropriate angle to the table and draw in the force vector along the string for each. Indicate the range of angles over which each diagram applies. E. In a caption below each diagram, write a mathematical equation to explain what is happening. (Hint: Use the point at which the yo-yo rests on the table as your point of origin. You may then want to add something to your diagrams.) F. Explain in words why the yo-yo behaves as it does in all three scenarios. PART 4: TOPS Try out the various tops in the room. A. THE STANDARD TOP: Draw a free body diagram of a standard top. Then draw a diagram showing the angular velocity, angular momentum, and torques acting on it. Use this diagram to explain briefly why tops precess. THE TIPPEE TOP: Notice that the round-bottomed tops (sometimes called "Tippee Tops") will flip themselves over and spin on their spindles. The sketch on the last page of these instructions is a side view of a spinning Tippee Top with its center of mass shown as a dot. You will need to cut this out and tape it in your lab notebook. B. How can you experimentally confirm that the center of mass of the Tippee Top is near the table top and not at the center of its spherical base? (Hint: Try setting the top so that its spindle is horizontal, as in the second diagram. It will not maintain this position. Why? Could the center of mass be at the center of the spherical section if the top behaves this way?) C. On the first diagram of the tilted top on the last page of these instructions, draw the following: 1) an angular velocity vector, 2) the angular momentum vector, 3) a vector to show in which direction friction between the spinning top and the surface of the table acts on the top, and 4) the position vector r from the center of mass to the point at which the frictional force is applied. (Hint: The frictional force acts because the surface of the top is slipping on the surface of the table top; this produces a kinetic frictional force. The direction of this frictional force will be such as to slow the top's motion. Look carefully at the point of contact between
6 the top and the table and decide on the direction of the frictional force). Then draw 5) the torque produced by this frictional force. Would this torque tend to make the top flip over? D. On the second diagram of the horizontal top, draw in all the things named above plus any other forces acting on the top. Also indicate the torques that the applied forces cause and describe the resulting motion. (Hint: Remember that a position vector goes from a point of origin to the point at which the force is acting. You may have more than one position vector here.) Does the torque due to the frictional force between the top and the surface of the table still tend to make it flip over? Why don't ordinary tops flip over the way Tippee Tops do?
7 The Tippee Top
Chapter 11 Angular Momentum; General Rotation. Copyright 2009 Pearson Education, Inc.
Chapter 11 Angular Momentum; General Rotation ! L = I!! Units of Chapter 11 Angular Momentum Objects Rotating About a Fixed Axis Vector Cross Product; Torque as a Vector Angular Momentum of a Particle
More informationRolling, Torque, Angular Momentum
Chapter 11 Rolling, Torque, Angular Momentum Copyright 11.2 Rolling as Translational and Rotation Combined Motion of Translation : i.e.motion along a straight line Motion of Rotation : rotation about a
More informationEnd-of-Chapter Exercises
End-of-Chapter Exercises Exercises 1 12 are conceptual questions that are designed to see if you have understood the main concepts of the chapter. 1. Figure 11.21 shows four different cases involving a
More informationChapter 9: Rotational Dynamics Tuesday, September 17, 2013
Chapter 9: Rotational Dynamics Tuesday, September 17, 2013 10:00 PM The fundamental idea of Newtonian dynamics is that "things happen for a reason;" to be more specific, there is no need to explain rest
More informationYPP December 2012: Angular Momentum Makes the World Go Round
YPP December 2012: Angular Momentum Makes the World Go Round Laboratory Introduction The purpose of this lab is to study the various aspects of rotation to determine how shape, size, mass, or distribution
More informationAngular Momentum. Conservation of Angular Momentum With Brief Description of a Gyroscope
Angular Momentum Conservation of Angular Momentum With Brief Description of a Gyroscope Physics 109, Fall 2017 Experiment Number 11 in the Physics 109 Lab Manual (page 50) Gyroscope Precession Outline
More informationCHAPTER 8: ROTATIONAL OF RIGID BODY PHYSICS. 1. Define Torque
7 1. Define Torque 2. State the conditions for equilibrium of rigid body (Hint: 2 conditions) 3. Define angular displacement 4. Define average angular velocity 5. Define instantaneous angular velocity
More information11-2 A General Method, and Rolling without Slipping
11-2 A General Method, and Rolling without Slipping Let s begin by summarizing a general method for analyzing situations involving Newton s Second Law for Rotation, such as the situation in Exploration
More informationLABORATORY 4: ROTATIONAL MOTION PLAYGROUND DYNAMICS: THE MERRY-GO-ROUND Written May-June 1993 by Melissa Wafer '95
LABORATORY 4: ROTATIONAL MOTION PLAYGROUND DYNAMICS: THE MERRY-GO-ROUND Written May-June 1993 by Melissa Wafer '95 In this laboratory period, you will use something that should be familiar to you to explain
More informationPhysics 121, Final Exam Do not turn the pages of the exam until you are instructed to do so.
, Final Exam Do not turn the pages of the exam until you are instructed to do so. You are responsible for reading the following rules carefully before beginning. Exam rules: You may use only a writing
More informationEXPERIMENT 7: ANGULAR KINEMATICS AND TORQUE (V_3)
TA name Lab section Date TA Initials (on completion) Name UW Student ID # Lab Partner(s) EXPERIMENT 7: ANGULAR KINEMATICS AND TORQUE (V_3) 121 Textbook Reference: Knight, Chapter 13.1-3, 6. SYNOPSIS In
More information5/6/2018. Rolling Without Slipping. Rolling Without Slipping. QuickCheck 12.10
Rolling Without Slipping Rolling is a combination of rotation and translation. For an object that rolls without slipping, the translation of the center of mass is related to the angular velocity by Slide
More informationO Which force produces the greatest torque about the point O (marked by the blue dot)?
Q10.1 The four forces shown all have the same magnitude: F 1 = F 2 = F 3 = F 4. F 1 F 3 O Which force produces the greatest torque about the point O (marked by the blue dot)? F 2 F 4 A. F 1 B. F 2 C. F
More informationLab #4 - Gyroscopic Motion of a Rigid Body
Lab #4 - Gyroscopic Motion of a Rigid Body Last Updated: April 6, 2007 INTRODUCTION Gyroscope is a word used to describe a rigid body, usually with symmetry about an axis, that has a comparatively large
More information8.012 Physics I: Classical Mechanics Fall 2008
MIT OpenCourseWare http://ocw.mit.edu 8.012 Physics I: Classical Mechanics Fall 2008 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. MASSACHUSETTS INSTITUTE
More informationChapter 8 Lecture. Pearson Physics. Rotational Motion and Equilibrium. Prepared by Chris Chiaverina Pearson Education, Inc.
Chapter 8 Lecture Pearson Physics Rotational Motion and Equilibrium Prepared by Chris Chiaverina Chapter Contents Describing Angular Motion Rolling Motion and the Moment of Inertia Torque Static Equilibrium
More informationExperimenting with Forces
A mother hears a loud crash in the living room. She walks into the room to see her seven-year-old son looking at a broken vase on the floor. How did that happen? she asks. I don t know. The vase just fell
More informationThe Circular Motion Lab
Name Date Class Answer questions in complete sentences The Circular Motion Lab Introduction We have discussed motion in straight lines and parabolic arcs. But many things move in circles or near circles,
More informationCutnell/Johnson Physics
Cutnell/Johnson Physics Classroom Response System Questions Chapter 9 Rotational Dynamics Interactive Lecture Questions 9.1.1. You are using a wrench in an attempt to loosen a nut by applying a force as
More informationChapter 8 - Rotational Dynamics and Equilibrium REVIEW
Pagpalain ka! (Good luck, in Filipino) Date Chapter 8 - Rotational Dynamics and Equilibrium REVIEW TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false. 1) When a rigid body
More information= F 4. O Which force produces the greatest torque about the point O (marked by the blue dot)? E. not enough information given to decide
Q10.1 The four forces shown all have the same magnitude: F 1 = F 2 = F 3 = F 4. F 1 F 3 O Which force produces the greatest torque about the point O (marked by the blue dot)? F 2 F 4 A. F 1 B. F 2 C. F
More informationConcept Question: Normal Force
Concept Question: Normal Force Consider a person standing in an elevator that is accelerating upward. The upward normal force N exerted by the elevator floor on the person is 1. larger than 2. identical
More informationDynamics of Rotational Motion: Rotational Inertia
Dynamics of Rotational Motion: Rotational Inertia Bởi: OpenStaxCollege If you have ever spun a bike wheel or pushed a merry-go-round, you know that force is needed to change angular velocity as seen in
More informationFall 2007 RED Barcode Here Physics 105, sections 1 and 2 Please write your CID Colton
Fall 007 RED Barcode Here Physics 105, sections 1 and Exam 3 Please write your CID Colton -3669 3 hour time limit. One 3 5 handwritten note card permitted (both sides). Calculators permitted. No books.
More informationIntensity of Light and Heat. The second reason that scientists prefer the word intensity is Well, see for yourself.
IDS 102 Intensity of Light and Heat When talking about a light source, most people are more comfortable with the word brightness than they are with the word intensity. Scientists generally prefer the word
More informationLab Partner(s) TA Initials (on completion) EXPERIMENT 7: ANGULAR KINEMATICS AND TORQUE
TA name Lab section Date TA Initials (on completion) Name UW Student ID # Lab Partner(s) EXPERIMENT 7: ANGULAR KINEMATICS AND TORQUE 117 Textbook Reference: Walker, Chapter 10-1,2, Chapter 11-1,3 SYNOPSIS
More informationThe Physics of Boomerangs By Darren Tan
The Physics of Boomerangs By Darren Tan Segment 1 Hi! I m the Science Samurai and glad to have you here with me today. I m going to show you today how to make your own boomerang, how to throw it and even
More informationEDUCATION DAY WORKBOOK
Grades 9 12 EDUCATION DAY WORKBOOK It is with great thanks for their knowledge and expertise that the individuals who devised this book are recognized. MAKING MEASUREMENTS Time: Solve problems using a
More informationLAB 05B: Friction 2 times PURPOSE BACKGROUND MATERIALS PRELIMINARY QUESTIONS: (TO DO BEFORE THE LAB!!) Lab 05B: Friction 1/5 Mr.
LAB 05B: Friction 2 times PURPOSE To investigate how friction is related to other variable such as the normal force, weight, and surface coefficients. In this experiment we will determine the static and
More informationBig Idea 4: Interactions between systems can result in changes in those systems. Essential Knowledge 4.D.1: Torque, angular velocity, angular
Unit 7: Rotational Motion (angular kinematics, dynamics, momentum & energy) Name: Big Idea 3: The interactions of an object with other objects can be described by forces. Essential Knowledge 3.F.1: Only
More informationExam 3 Practice Solutions
Exam 3 Practice Solutions Multiple Choice 1. A thin hoop, a solid disk, and a solid sphere, each with the same mass and radius, are at rest at the top of an inclined plane. If all three are released at
More informationGyroscopes and statics
Gyroscopes and statics Announcements: Welcome back from Spring Break! CAPA due Friday at 10pm We will finish Chapter 11 in H+R on angular momentum and start Chapter 12 on stability. Friday we will begin
More informationPHY131H1F - Class 18. Torque of a quick push
Today: Today, Chapter 11: PHY131H1F - Class 18 Angular velocity and Angular acceleration vectors Torque and the Vector Cross Product Angular Momentum Conservation of Angular Momentum Gyroscopes and Precession
More information8.012 Physics I: Classical Mechanics Fall 2008
IT OpenCourseWare http://ocw.mit.edu 8.012 Physics I: Classical echanics Fall 2008 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. ASSACHUSETTS INSTITUTE
More informationLecture PowerPoints. Chapter 4 Physics: for Scientists & Engineers, with Modern Physics, 4th edition Giancoli
Lecture PowerPoints Chapter 4 Physics: for Scientists & Engineers, with Modern Physics, 4th edition Giancoli 2009 Pearson Education, Inc. This work is protected by United States copyright laws and is provided
More informationChapter 8 Rotational Motion and Equilibrium. 1. Give explanation of torque in own words after doing balance-the-torques lab as an inquiry introduction
Chapter 8 Rotational Motion and Equilibrium Name 1. Give explanation of torque in own words after doing balance-the-torques lab as an inquiry introduction 1. The distance between a turning axis and the
More informationPhysics 8 Friday, November 4, 2011
Physics 8 Friday, November 4, 2011 Please turn in Homework 7. I will hand out solutions once everyone is here. The handout also includes HW8 and a page or two of updates to the equation sheet needed to
More informationENGINEERING COUNCIL DYNAMICS OF MECHANICAL SYSTEMS D225 TUTORIAL 6 - GYROSCOPES. On completion of this tutorial you should be able to
ENGINEERING COUNCIL DYNAMICS OF MECHANICAL SYSTEMS D225 TUTORIAL 6 - GYROSCOPES This tutorial examines linear and angular motion. The work is then linked with earlier studies of materials and mechanisms
More informationBig Ideas 3 & 5: Circular Motion and Rotation 1 AP Physics 1
Big Ideas 3 & 5: Circular Motion and Rotation 1 AP Physics 1 1. A 50-kg boy and a 40-kg girl sit on opposite ends of a 3-meter see-saw. How far from the girl should the fulcrum be placed in order for the
More informationPhysics 130: Questions to study for midterm #1 from Chapter 8
Physics 130: Questions to study for midterm #1 from Chapter 8 1. If the beaters on a mixer make 800 revolutions in 5 minutes, what is the average rotational speed of the beaters? a. 2.67 rev/min b. 16.8
More informationAP Physics II Summer Packet
Name: AP Physics II Summer Packet Date: Period: Complete this packet over the summer, it is to be turned it within the first week of school. Show all work were needed. Feel free to use additional scratch
More informationReview for 3 rd Midterm
Review for 3 rd Midterm Midterm is on 4/19 at 7:30pm in the same rooms as before You are allowed one double sided sheet of paper with any handwritten notes you like. The moment-of-inertia about the center-of-mass
More informationAP Physics 1 Rotational Motion Practice Test
AP Physics 1 Rotational Motion Practice Test MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) A spinning ice skater on extremely smooth ice is able
More informationMITOCW MIT8_01F16_w02s05v06_360p
MITOCW MIT8_01F16_w02s05v06_360p One of our classic problems to analyze using Newton's second law is the motion of two blocks with a rope that's wrapped around a pulley. So imagine we have a pulley, P,
More informationRotational Motion Test
Rotational Motion Test Multiple Choice: Write the letter that best answers the question. Each question is worth 2pts. 1. Angular momentum is: A.) The sum of moment of inertia and angular velocity B.) The
More informationChapter 4 Force and Motion
Chapter 4 Force and Motion Units of Chapter 4 The Concepts of Force and Net Force Inertia and Newton s First Law of Motion Newton s Second Law of Motion Newton s Third Law of Motion More on Newton s Laws:
More informationPHYS 185 Final Exam December 4, 2012
PHYS 185 Final Exam December 4, 2012 Name: Answer the questions in the spaces provided on the question sheets. If you run out of room for an answer, continue on the back of the page. Please make an effort
More informationPhysics 6A Lab Experiment 6
Biceps Muscle Model Physics 6A Lab Experiment 6 Introduction This lab will begin with some warm-up exercises to familiarize yourself with the theory, as well as the experimental setup. Then you ll move
More informationLast Name: First Name Network-ID Discussion Section: Discussion TA Name:
Last Name: First Name Network-ID Discussion Section: Discussion TA Name: Instructions Turn off your cell phone and put it out of sight. Keep your calculator on your own desk. Calculators cannot be shared.
More informationUNIVERSITY OF SASKATCHEWAN Department of Physics and Engineering Physics
UNIVERSITY OF SASKATCHEWAN Department of Physics and Engineering Physics Physics 111.6 MIDTERM TEST #2 November 16, 2000 Time: 90 minutes NAME: STUDENT NO.: (Last) Please Print (Given) LECTURE SECTION
More informationLast 6 lectures are easier
Your Comments I love you. Seriously. I do. And you never post it. I felt really bad whilst completing the checkpoint for this. This stuff is way above my head and I struggled with the concept of precession.
More informationLecture PowerPoints. Chapter 11. Physics for Scientists and Engineers, with Modern Physics, 4 th edition Giancoli
Lecture PowerPoints Chapter 11 Physics for Scientists and Engineers, with Modern Physics, 4 th edition Giancoli 2009 Pearson Education, Inc. This work is protected by United States copyright laws and is
More informationPHYSICS. Chapter 12 Lecture FOR SCIENTISTS AND ENGINEERS A STRATEGIC APPROACH 4/E RANDALL D. KNIGHT Pearson Education, Inc.
PHYSICS FOR SCIENTISTS AND ENGINEERS A STRATEGIC APPROACH 4/E Chapter 12 Lecture RANDALL D. KNIGHT Chapter 12 Rotation of a Rigid Body IN THIS CHAPTER, you will learn to understand and apply the physics
More informationToday. Ch. 8 on Rotation. Note, all lectures and pre-lectures posted up as always at
Ch. 8 on Rotation Today Note, all lectures and pre-lectures posted up as always at http://www.hunter.cuny.edu/physics/courses/physics100/spring-2016 Looking ahead: Sep 27, Review (Chs 2,3,4,5,6,7,8) Sep
More informationCHAPTER 4: Linear motion and angular motion. Practice questions - text book pages 91 to 95 QUESTIONS AND ANSWERS. Answers
CHAPTER 4: Linear motion and angular motion Practice questions - text book pages 91 to 95 1) Which of the following pairs of quantities is not a vector/scalar pair? a. /mass. b. reaction force/centre of
More information8.012 Physics I: Classical Mechanics Fall 2008
IT OpenCourseWare http://ocw.mit.edu 8.012 Physics I: Classical echanics Fall 2008 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. ASSACHUSETTS INSTITUTE
More informationGeneral Definition of Torque, final. Lever Arm. General Definition of Torque 7/29/2010. Units of Chapter 10
Units of Chapter 10 Determining Moments of Inertia Rotational Kinetic Energy Rotational Plus Translational Motion; Rolling Why Does a Rolling Sphere Slow Down? General Definition of Torque, final Taking
More informationLesson 11: Newton s Third Law: Quantitative
11.1 Observe and Find a Pattern Lesson 11: Newton s Third Law: Quantitative The goal of this experiment is to determine a mathematical relationship between the force that object A exerts on object B and
More information8.012 Physics I: Classical Mechanics Fall 2008
MIT OpenCourseWare http://ocw.mit.edu 8.012 Physics I: Classical Mechanics Fall 2008 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. MASSACHUSETTS INSTITUTE
More informationConservation of Angular Momentum
Lecture 23 Chapter 12 Physics I Conservation of Angular Momentum Course website: http://faculty.uml.edu/andriy_danylov/teaching/physicsi IN THIS CHAPTER, you will continue discussing rotational dynamics
More informationEQUILIBRIUM OBJECTIVES PRE-LECTURE
27 FE3 EQUILIBRIUM Aims OBJECTIVES In this chapter you will learn the concepts and principles needed to understand mechanical equilibrium. You should be able to demonstrate your understanding by analysing
More informationKinetic Energy of Rolling
Kinetic Energy of Rolling A solid disk and a hoop (with the same mass and radius) are released from rest and roll down a ramp from a height h. Which one is moving faster at the bottom of the ramp? A. they
More informationSlide 1 / 133. Slide 2 / 133. Slide 3 / How many radians are subtended by a 0.10 m arc of a circle of radius 0.40 m?
1 How many radians are subtended by a 0.10 m arc of a circle of radius 0.40 m? Slide 1 / 133 2 How many degrees are subtended by a 0.10 m arc of a circle of radius of 0.40 m? Slide 2 / 133 3 A ball rotates
More informationChapter 10: Dynamics of Rotational Motion
Chapter 10: Dynamics of Rotational Motion What causes an angular acceleration? The effectiveness of a force at causing a rotation is called torque. QuickCheck 12.5 The four forces shown have the same strength.
More informationSlide 2 / 133. Slide 1 / 133. Slide 3 / 133. Slide 4 / 133. Slide 5 / 133. Slide 6 / 133
Slide 1 / 133 1 How many radians are subtended by a 0.10 m arc of a circle of radius 0.40 m? Slide 2 / 133 2 How many degrees are subtended by a 0.10 m arc of a circle of radius of 0.40 m? Slide 3 / 133
More informationROTATIONAL MECHANICS AP Physics 1 Exploratory Lab
ROTATIONAL MECHANICS AP Physics 1 Exploratory Lab Name: Period: Date: Weight 1 (summative) DIRECTIONS: Do the activities below in groups of two or three and fill the blacks provided. STATION 1: ROTATIONAL
More informationIII. Angular Momentum Conservation (Chap. 10) Rotation. We repeat Chap. 2-8 with rotatiing objects. Eqs. of motion. Energy.
Chap. 10: Rotational Motion I. Rotational Kinematics II. Rotational Dynamics - Newton s Law for Rotation III. Angular Momentum Conservation (Chap. 10) 1 Toward Exam 3 Eqs. of motion o To study angular
More informationQ25: Record the wavelength of each colored line according to the scale given.
C. Measurement Errors and Uncertainties The term "error" signifies a deviation of the result from some "true" value. Often in science, we cannot know what the true value is, and we can only determine estimates
More informationPSI AP Physics I Rotational Motion
PSI AP Physics I Rotational Motion Multiple-Choice questions 1. Which of the following is the unit for angular displacement? A. meters B. seconds C. radians D. radians per second 2. An object moves from
More informationRotational Dynamics. Moment of Inertia of a point mass about an axis of rotation a distance r away: I m = mr 2
Rotational Dynamics Objective: To investigate the behavior of a rotating system subjected to internal torques and external torques. To apply knowledge gained from the linear momentum lab to its rotational
More informationPSI AP Physics I Rotational Motion
PSI AP Physics I Rotational Motion Multiple-Choice questions 1. Which of the following is the unit for angular displacement? A. meters B. seconds C. radians D. radians per second 2. An object moves from
More informationpreap Physics Exploratory Lab Weight = 1 DIRECTIONS: Do the activities below and fill the blanks/spaces provided. 50 points available.
ROTATIONAL MECHANICS Name: Period: Date: preap Physics Exploratory Lab Weight = 1 DIRECTIONS: Do the activities below and fill the blanks/spaces provided. 50 points available. STATION 1: ROTATIONAL INERTIA
More informationRecap: Solid Rotational Motion (Chapter 8) displacement velocity acceleration Newton s 2nd law τ = I.α N.s τ = F. l moment of inertia mass size
Recap: Solid Rotational Motion (Chapter 8) We have developed equations to describe rotational displacement θ, rotational velocity ω and rotational acceleration α. We have used these new terms to modify
More informationQuest Chapter 09. Eliminate the obviously wrong answers. Consider what is changing: speed, velocity, some part of velocity? Choose carefully.
1 A dragster maintains a speedometer reading of 100 km/h and passes through a curve with a constant radius. Which statement is true? 1. The dragster rounded the curve at a changing speed of 100 km/h. 2.
More informationMoment of Inertia: Rotational Energy
Lab Section (circle): Day: Monday Tuesday Time: 8:00 9:30 1:10 2:40 Moment of Inertia: Rotational Energy Name Partners Pre-Lab You are required to finish this section before coming to the lab; it will
More informationPhysics 131: Lecture 22. Today s Agenda
Physics 131: Lecture Today s Agenda Rotational dynamics Torque = I Angular Momentum Physics 01: Lecture 10, Pg 1 An Unfair Race A frictionless block and a rolling (without slipping) disk are released at
More informationLAB PHYSICS MIDTERM EXAMINATION STUDY GUIDE
Freehold Regional High School District 2011-12 LAB PHYSICS MIDTERM EXAMINATION STUDY GUIDE About the Exam The Lab Physics Midterm Examination consists of 32 multiple choice questions designed to assess
More informationHands-On Science. Force & Motion. Karen Kwitter and Steven Souza illustrated by Lloyd Birmingham
Hands-On Science Force & Motion Karen Kwitter and Steven Souza illustrated by Lloyd Birmingham WALCH EDUCATION Contents To the Teacher... v National Science Education Standards Correlations...vi General
More informationPhysics 131: Lecture 22. Today s Agenda
Physics 131: Lecture 22 Today s Agenda Rotational dynamics Torque = I Angular Momentum Physics 201: Lecture 10, Pg 1 An Unfair Race A frictionless block and a rolling (without slipping) disk are released
More informationChapter 5 The Force Vector
Conceptual Physics/ PEP Name: Date: Chapter 5 The Force Vector Section Review 5.1 1. Indicate whether each of the following units of measurement are scalar or vector units: Speed _scalar time scalar mass
More informationChapter 9: Momentum Tuesday, September 17, :00 PM
Ch9 Page 1 Chapter 9: Momentum Tuesday, September 17, 2013 10:00 PM In this chapter and the next one, we'll explore alternative perspectives to Newton's second law. The concepts of momentum and energy
More informationChapter 9 TORQUE & Rotational Kinematics
Chapter 9 TORQUE & Rotational Kinematics This motionless person is in static equilibrium. The forces acting on him add up to zero. Both forces are vertical in this case. This car is in dynamic equilibrium
More informationPhysics 106 Common Exam 2: March 5, 2004
Physics 106 Common Exam 2: March 5, 2004 Signature Name (Print): 4 Digit ID: Section: Instructions: nswer all questions. Questions 1 through 10 are multiple choice questions worth 5 points each. You may
More informationChapter 8 Lecture Notes
Chapter 8 Lecture Notes Physics 2414 - Strauss Formulas: v = l / t = r θ / t = rω a T = v / t = r ω / t =rα a C = v 2 /r = ω 2 r ω = ω 0 + αt θ = ω 0 t +(1/2)αt 2 θ = (1/2)(ω 0 +ω)t ω 2 = ω 0 2 +2αθ τ
More informationIn the absence of an external force, the momentum of an object remains unchanged conservation of momentum. In this. rotating objects tend to
Rotating objects tend to keep rotating while non- rotating objects tend to remain non-rotating. In the absence of an external force, the momentum of an object remains unchanged conservation of momentum.
More informationMath Review -- Conceptual Solutions
Math Review Math Review -- Conceptual Solutions 1.) Is three plus four always equal to seven? Explain. Solution: If the numbers are scalars written in base 10, the answer is yes (if the numbers are in
More informationRotational Motion About a Fixed Axis
Rotational Motion About a Fixed Axis Vocabulary rigid body axis of rotation radian average angular velocity instantaneous angular average angular Instantaneous angular frequency velocity acceleration acceleration
More informationUnit 1: Equilibrium and Center of Mass
Unit 1: Equilibrium and Center of Mass FORCES What is a force? Forces are a result of the interaction between two objects. They push things, pull things, keep things together, pull things apart. It s really
More informationTest 7 wersja angielska
Test 7 wersja angielska 7.1A One revolution is the same as: A) 1 rad B) 57 rad C) π/2 rad D) π rad E) 2π rad 7.2A. If a wheel turns with constant angular speed then: A) each point on its rim moves with
More information20 Torque & Circular Motion
Chapter 0 Torque & Circular Motion 0 Torque & Circular Motion The mistake that crops up in the application of Newton s nd Law for Rotational Motion involves the replacement of the sum of the torques about
More informationMost people said that they understand force and acceleration. GOOD!
Questions and Answers on Dynamics 3/17/98 Thanks to the students who submitted questions and comments! I have grouped them by topic and shortened some of the long questions/comments. Please feel free to
More informationName Date Period PROBLEM SET: ROTATIONAL DYNAMICS
Accelerated Physics Rotational Dynamics Problem Set Page 1 of 5 Name Date Period PROBLEM SET: ROTATIONAL DYNAMICS Directions: Show all work on a separate piece of paper. Box your final answer. Don t forget
More informationPhysics 2A Chapter 4: Forces and Newton s Laws of Motion
Physics 2A Chapter 4: Forces and Newton s Laws of Motion There is nothing either good or bad, but thinking makes it so. William Shakespeare It s not what happens to you that determines how far you will
More informationChapter 8 Rotational Motion
Chapter 8 Rotational Motion Chapter 8 Rotational Motion In this chapter you will: Learn how to describe and measure rotational motion. Learn how torque changes rotational velocity. Explore factors that
More informationMITOCW 18. Quiz Review From Optional Problem Set 8
MITOCW 18. Quiz Review From Optional Problem Set 8 The following content is provided under a Creative Commons license. Your support will help MIT OpenCourseWare continue to offer high quality educational
More informationPractice Midterm Exam 1 Physics 14
Booklet Number Practice Midterm Exam 1 Physics 14 Last Name First Name To get a full credit show the all calculations steps in the spaces provided. All work must be shown in order to receive FULL credit.
More informationName: Date: Period: AP Physics C Rotational Motion HO19
1.) A wheel turns with constant acceleration 0.450 rad/s 2. (9-9) Rotational Motion H19 How much time does it take to reach an angular velocity of 8.00 rad/s, starting from rest? Through how many revolutions
More informationEnergy and Angular Momentum
Notes 13 Rotation Page 1 Energy and Angular Momentum The kinetic energy associate with a rotating object is simply the sum of the regular kinetic energies. Our goal is to state the rotational kinetic energy
More informationPHYSICS 221, FALL 2011 EXAM #2 SOLUTIONS WEDNESDAY, NOVEMBER 2, 2011
PHYSICS 1, FALL 011 EXAM SOLUTIONS WEDNESDAY, NOVEMBER, 011 Note: The unit vectors in the +x, +y, and +z directions of a right-handed Cartesian coordinate system are î, ĵ, and ˆk, respectively. In this
More informationWe define angular displacement, θ, and angular velocity, ω. What's a radian?
We define angular displacement, θ, and angular velocity, ω Units: θ = rad ω = rad/s What's a radian? Radian is the ratio between the length of an arc and its radius note: counterclockwise is + clockwise
More information