Chapter 5: Random Vibration. ANSYS Mechanical. Dynamics. 5-1 July ANSYS, Inc. Proprietary 2009 ANSYS, Inc. All rights reserved.
|
|
- Harold Johnston
- 6 years ago
- Views:
Transcription
1 Chapter 5: Random Vibration ANSYS Mechanical Dynamics 5-1 July 2009
2 Analysis Random Vibration Analysis Topics covered: Definition and purpose Overview of Workbench capabilities Procedure 5-2 July 2009
3 Analysis A. Definition and Purpose What is random vibration analysis? A spectrum analysis technique based on probability and statistics. Meant for loads such as acceleration loads in a rocket launch that produce different time histories during every launch. Reference: Random vibrations in mechanical systems by Crandall & Mark 5-3 July 2009
4 Analysis Definition and Purpose Transient analysis is not an option since the time history is not deterministic (sample is not repeatable). Instead, using statistics the sample time histories are converted to Power Spectral Density function (PSD), a statistical representation of the load time history. Image from Random Vibrations Theory and Practice by Wirsching, Paez and Ortiz. 5-4 July 2009
5 Analysis Power Spectral Density Sample time histories are converted to Power Spectral Density function (PSD), a statistical representation of the load time history. Reference: Random vibrations in mechanical systems by Crandall & Mark Image from Random Vibrations Theory and Practice by Wirsching, Paez and Ortiz. 5-5 July 2009
6 Analysis Statistical Representation A Random Vibration analysis computes the probability distribution of different results, such as displacement or stress, due to some random excitation The analysis follows a modal analysis An internal combination is done to compute the combined effect from each mode and their interactions. Gaussian (normal) Distribution 3s 5-6 July 2009
7 Analysis Power Spectral Density The Power Spectral Density is the mean square value of the excitation for a unit frequency band. The area under a PSD curve is the variance of the response (square of the standard deviation). The units used in PSD are mean square/hz (e.g. an acceleration PSD will have units of G 2 /Hz). The quantity represented by PSD may be displacement, velocity, acceleration, force, or pressure. Random Vibration curve by MIL-STD July 2009
8 Analysis Common Uses Commonly used for Airborne electronics Acoustic loading of Airframe parts Jitter in alignment of optical equipment Relative deformation in large mirrors 5-8 July 2009
9 Workbench Capabilities Input: Natural frequencies and mode shapes from a modal analysis Single or multiple PSD excitations applied to ground nodes Output: 1s results can be contoured like any other analysis. Response PSD at one DOF (one point in one direction) 5-9 July 2009
10 Procedure: Random Vibration 5-10 July 2009
11 Procedure Drop a Modal (ANSYS) system into the project schematic July 2009
12 Procedure Drop a Random Vibration system onto the Solution cell of the Modal system July 2009
13 Procedure Create new geometry, or link to existing geometry. Edit the Model cell to bring up the Mechanical application July 2009
14 Preprocessing Verify materials, connections, and mesh settings. This was covered in Workbench Mechanical Intro July 2009
15 Preprocessing Add supports to the model. Displacement constrains must have a magnitude of zero July 2009
16 Solution Settings Choose the number of modes to extract. If needed, upper and lower bounds on frequency may be specified to extract the modes within a specified range July 2009
17 Postprocessing Review the modal results before proceeding July 2009
18 Preprocessing Insert an Acceleration, Velocity, or Direction PSD base excitation. Set the Boundary Condition, Load (Tabular) Data, and Direction July 2009
19 Postprocessing Insert Directional Deformation, Velocity, or Acceleration. the direction and sigma value may be chosen here note that results are always reviewed with scaling set to July 2009
20 Postprocessing Stress (normal, shear, equivalent) and Strain (normal, shear) results can also be reviewed July 2009
21 Postprocessing Response PSD can be plotted at one DOF (one point in one direction, either absolute or relative to base excitation) July 2009
22 Workshop Random Vibration In workshop 5A, you will determine the displacements and stresses in a girder assembly due to an acceleration PSD. WS5A: Random Vibration (PSD) Analysis of a Girder Assembly 5-22 July 2009
Chapter 5. Vibration Analysis. Workbench - Mechanical Introduction ANSYS, Inc. Proprietary 2009 ANSYS, Inc. All rights reserved.
Workbench - Mechanical Introduction 12.0 Chapter 5 Vibration Analysis 5-1 Chapter Overview In this chapter, performing free vibration analyses in Simulation will be covered. In Simulation, performing a
More informationLecture 9 Thermal Analysis
Lecture 9 Thermal Analysis 16.0 Release Introduction to ANSYS Mechanical 1 2015 ANSYS, Inc. February 27, 2015 Chapter Overview In this chapter, performing steady-state thermal analyses in Mechanical will
More informationRandom Vibration Analysis in FEMAP An Introduction to the Hows and Whys
Random Vibration Analysis in FEMAP An Introduction to the Hows and Whys Adrian Jensen, PE Senior Staff Mechanical Engineer Kyle Hamilton Staff Mechanical Engineer Table of Contents 1. INTRODUCTION... 4
More informationDr. N.V.Srinivasulu, S.Jaikrishna, A.Navatha
PSD Analysis of an Automobile Dash Panel Dr. N.V.Srinivasulu, S.Jaikrishna, A.Navatha Abstract:-In this paper, PSD analysis of an automobile dash panel is performed in order to reduce the vibrations that
More informationVibro-acoustic Analysis for Noise Reduction of Electric Machines
Vibro-acoustic Analysis for Noise Reduction of Electric Machines From Flux to OptiStruct Example : Synchronous Machine Flux 2D coupling to OptiStruct Patrick LOMBARD Application Team Manager Patrick.Lombard@cedrat.com
More informationAcoustics Analysis of Speaker ANSYS, Inc. November 28, 2014
Acoustics Analysis of Speaker 1 Introduction ANSYS 14.0 offers many enhancements in the area of acoustics. In this presentation, an example speaker analysis will be shown to highlight some of the acoustics
More informationDISPENSA FEM in MSC. Nastran
DISPENSA FEM in MSC. Nastran preprocessing: mesh generation material definitions definition of loads and boundary conditions solving: solving the (linear) set of equations components postprocessing: visualisation
More informationVibration Analysis of a Centrifugal Pump
Vibration Analysis of a Centrifugal Pump A. Naveen Varma 1, K. Bala Bhaskar 1, B. Sai Kumar 1, G.Giridhar 1, Vamsi Raja 2, P. Phani Prasanthi 3 1Research Scholars 1Department of Mechanical Engineering,
More informationME 475 Modal Analysis of a Tapered Beam
ME 475 Modal Analysis of a Tapered Beam Objectives: 1. To find the natural frequencies and mode shapes of a tapered beam using FEA.. To compare the FE solution to analytical solutions of the vibratory
More informationWorkshop D Structural Analysis. Workbench - Mechanical Introduction 12.0 WS ANSYS, Inc. Proprietary 2009 ANSYS, Inc. All rights reserved.
Workbench - Mechanical Introduction 12.0 Workshop 4.2 2D Structural Analysis WS4.2-1 Workshop 4.2 - Goals Workshop 4.2 consists of a 2 part assembly representing a pressure cap and retaining flange (full
More informationEstimating Structural Response to Random Vibration: Reaction Forces
Estimating Structural Response to Random Vibration: Reaction Forces Alex Grishin, Consulting Engineer PADT, Tempe AZ ANSYS Release 17.0 (January, 2016) Among the various enhancements, users may now estimate
More informationRANDOM VIBRATION ANALYSIS OF MECHANICAL HARDWARE OF FLIGHT DATA RECORDER
RANDOM VIBRATION ANALYSIS OF MECHANICAL HARDWARE OF FLIGHT DATA RECORDER Karteek Navuri 1, Eswara Kumar A. 2, Beulah Mani P. 1 and B. Satya Krishna 3 1 Department of Mechanical Engineering, V R Siddhartha
More informationCustomer: Subject: OPM Telcordia GR-468. Product: Fiber Optic Power Monitors. Responsible: Luis Fernandes
1. General: This report details the test procedures and results obtained in the process of qualification of Fiber Optic Power Monitors [1] for C band applications (OPM-11-50-X) under Telcordia - CORE [2]
More informationImproving the Accuracy of Dynamic Vibration Fatigue Simulation
Improving the Accuracy of Dynamic Vibration Fatigue Simulation Kurt Munson HBM Prenscia Agenda 2 1. Introduction 2. Dynamics and the frequency response function (FRF) 3. Using finite element analysis (FEA)
More informationResponse Spectrum Analysis Shock and Seismic. FEMAP & NX Nastran
Response Spectrum Analysis Shock and Seismic FEMAP & NX Nastran Table of Contents 1. INTRODUCTION... 3 2. THE ACCELEROGRAM... 4 3. CREATING A RESPONSE SPECTRUM... 5 4. NX NASTRAN METHOD... 8 5. RESPONSE
More informationANALYSIS AND EXPERIMENT OF DYNAMIC CHARACTERISTICS OF ELECTRONIC DEVICE CHASSIS
ANALYSIS AND EXPERIMENT OF DYNAMIC CHARACTERISTICS OF ELECTRONIC DEVICE CHASSIS HE QING, DU DONGMEI, JIANG XUCHAO Key Laboratory of Condition Monitoring and Control for Power Plant Equipment, Ministry
More informationTracker Tower 01 Prototype Test & Analysis Overview
Tracker Tower 01 Prototype Test & Analysis Overview Erik Swensen June 19, 2002 HPS-102070-0002 Test Background Design Philosophy: Tracker Tower 01 Prototype was used as an engineering evaluation model
More informationDesign of the Deployment Mechanism of Solar Array on a Small Satellite
American Journal of Mechanical Engineering, 2013, Vol. 1, No. 3, 66-72 Available online at http://pubs.sciepub.com/ajme/1/3/2 Science and Education Publishing DOI:10.12691/ajme-1-3-2 Design of the Deployment
More informationComparative study between random vibration and linear static analysis using Miles method for thruster brackets in space structures
Comparative study between random vibration and linear static analysis using Miles method for thruster brackets in space structures Ion DIMA*,1, Cristian-Gheorghe MOISEI 1, Calin-Dumitru COMAN 1, Mihaela
More informationFIFTH INTERNATIONAL CONGRESS ON SOUND AND VIBRATION DECEMBER 15-18, 1997 ADELAIDE, SOUTH AUSTRALIA. Invited Paper
FIFTH INTERNATIONAL CONGRESS ON SOUND AND VIBRATION DECEMBER 15-18, 1997 ADELAIDE, SOUTH AUSTRALIA Invited Paper NONSTATIONARY TRANSIENT VIBROACOUSTIC RESPONSE OF A BEAM STRUCTURE R. E. Caimi and R. N.
More informationModule 10: Free Vibration of an Undampened 1D Cantilever Beam
Module 10: Free Vibration of an Undampened 1D Cantilever Beam Table of Contents Page Number Problem Description Theory Geometry 4 Preprocessor 6 Element Type 6 Real Constants and Material Properties 7
More informationEffect of Angular movement of Lifting Arm on Natural Frequency of Container Lifting Mechanism using Finite Element Modal Analysis
Effect of Angular movement of Lifting Arm on Natural Frequency of Container Lifting Mechanism using Finite Element Modal Analysis Khodu M Dhameliya, 2 Utpal V Shah, 3 Dhaval Makwana, 4 Mansi Yadav, 5 Ishankumar
More informationMASS LOADING EFFECTS FOR HEAVY EQUIPMENT AND PAYLOADS Revision F
MASS LOADING EFFECTS FOR HEAVY EQUIPMENT AND PAYLOADS Revision F By Tom Irvine Email: tomirvine@aol.com May 19, 2011 Introduction Consider a launch vehicle with a payload. Intuitively, a realistic payload
More informationScienceDirect. Fatigue life from sine-on-random excitations
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 101 (2015 ) 235 242 3rd International Conference on Material and Component Performance under Variable Amplitude Loading, VAL2015
More informationWorkshop 6.1. Steady State Thermal Analysis. Workbench - Mechanical Introduction 12.0 WS6.1-1
Workbench - Mechanical Introduction 12.0 Workshop 6.1 Steady State Thermal Analysis WS6.1-1 Workshop 6.1 - Goals In this workshop we will analyze the pump housing shown below for its heat transfer characteristics.
More informationTitelmasterformat durch Klicken bearbeiten
Titelmasterformat durch Klicken bearbeiten Vibration and Acoustics for Electric Drive Development Presenter: Jens Otto, CADFEM GmbH Developer: Dr. Jürgen Wibbeler, Dr. Martin Hanke, CADFEM GmbH 4th CADFEM
More informationAN OVERVIEW OF THE E.C.S.S. HANDBOOK FOR SPACECRAFT LOADS ANALYSIS
COMPDYN 2011 III ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering M. Papadrakakis, M. Fragiadakis, V. Plevris (eds.) Corfu, Greece, 25 28 May 2011
More informationMEG 795 COURSE PROJECT
MEG 795 COURSE PROJECT Transient dynamic analysis of a 3 Point Impact Hammer Test on a simply supported steel plate using ANSYS and LS-DYNA JAGANNADHA RAO NARAPARAJU DEPARTMENT OF MECHANICAL ENGINEERING
More informationDynamic Analysis in FEMAP. May 24 th, presented by Philippe Tremblay Marc Lafontaine
Dynamic Analysis in FEMAP presented by Philippe Tremblay Marc Lafontaine marc.lafontaine@mayasim.com 514-951-3429 date May 24 th, 2016 Agenda NX Nastran Transient, frequency response, random, response
More informationANSYS Explicit Dynamics Update. Mai Doan
ANSYS Explicit Dynamics Update Mai Doan Mai.Doan@ansys.com +1 512 687 9523 1/32 ANSYS Explicit Dynamics Update Outline Introduction Solve Problems that were Difficult or Impossible in the Past Structural
More informationClosed Loop Optimization of Opto-Mechanical Structure via Mechanical and Optical analysis software. Abstract:
Closed Loop Optimization of Opto-Mechanical Structure via Mechanical and Optical analysis software David Bonin, Opto-Mechanical Engineer Brian McMaster, Senior Opto-Mechanical Engineer Corning Tropel Corporation,
More informationPSD Analysis and Optimization of 2500hp Shale Gas Fracturing Truck Chassis Frame
Send Orders for Reprints to reprints@benthamscience.ae The Open Mechanical Engineering Journal, 2014, 8, 533-538 533 Open Access PSD Analysis and Optimization of 2500hp Shale Gas Fracturing Truck Chassis
More informationAeroelastic Gust Response
Aeroelastic Gust Response Civil Transport Aircraft - xxx Presented By: Fausto Gill Di Vincenzo 04-06-2012 What is Aeroelasticity? Aeroelasticity studies the effect of aerodynamic loads on flexible structures,
More informationThe LAT Electronics consists of five distinct box assemblies as follows:
I. SYNOPSIS The preliminary stress analyses for the DAQ Electronics assemblies have been performed per the conditions specified in the Environmental Specification LAT-SS-00778. The analysis considered
More informationVibration Analysis. with SOLIDWORKS Simulation 2018 SDC. Paul M. Kurowski. Better Textbooks. Lower Prices.
Vibration Analysis with SOLIDWORKS Simulation 2018 Paul M. Kurowski SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationFinite Element Analysis of Piezoelectric Cantilever
Finite Element Analysis of Piezoelectric Cantilever Nitin N More Department of Mechanical Engineering K.L.E S College of Engineering and Technology, Belgaum, Karnataka, India. Abstract- Energy (or power)
More informationLecture 10 Multistep Analysis
Lecture 10 Multistep Analysis 16.0 Release Introduction to ANSYS Mechanical 1 2015 ANSYS, Inc. February 27, 2015 Chapter Overview In this chapter, aspects of reviewing results will be covered: A. Multistep
More informationThe Design of Polyurethane Parts: Using Closed Solutions and Finite Element Analysis to Obtain Optimal Results
The Design of Polyurethane Parts: Using Closed Solutions and Finite Element Analysis to Obtain Optimal Results By: Richard Palinkas George Nybakken Ian Laskowitz Chemtura Corporation Overview How does
More informationFEM-Study ILD-AHCAL. Seismic simulation. K. Gadow, M. Lemke, F. Sefkow Santander,
FEM-Study ILD-AHCAL Seismic simulation K. Gadow, M. Lemke, F. Sefkow Santander, 3.6..2016 Overview > Reminder of earlier studies > Sub-structuring method > First results > Outlook Martin Lemke FEM-Study
More informationOptimized PSD Envelope for Nonstationary Vibration
Optimized PSD Envelope for Nonstationary Vibration Tom Irvine Dynamic Concepts, Inc NASA Engineering & Safety Center (NESC) 3-5 June 2014 The Aerospace Corporation 2010 The Aerospace Corporation 2012 Vibrationdata
More informationOpto-Mechanical I/F for ANSYS
Opto-Mechanical I/F for ANSYS Victor Genberg, Gregory Michels, Keith Doyle Sigmadyne, Inc. Abstract Thermal and structural output from ANSYS is not in a form useful for optical analysis software. Temperatures,
More information3. MDOF Systems: Modal Spectral Analysis
3. MDOF Systems: Modal Spectral Analysis Lesson Objectives: 1) Construct response spectra for an arbitrarily varying excitation. 2) Compute the equivalent lateral force, base shear, and overturning moment
More informationFig. 1. Circular fiber and interphase between the fiber and the matrix.
Finite element unit cell model based on ABAQUS for fiber reinforced composites Tian Tang Composites Manufacturing & Simulation Center, Purdue University West Lafayette, IN 47906 1. Problem Statement In
More informationHarmonic Analysis Of Engine Crankshaft As A Fixed Beam
Harmonic Analysis Of Engine Crankshaft As A Fixed Beam R. B. Sharma 1, Vikas Sharma 2 & Yogendra S. Rajput 2 Asst. Prof. & Head, Mech. Engg., Dept., RustamJi Institute of Technology, Tekanpur, Gwalior,
More informationEQUIVALENT STATIC LOADS FOR RANDOM VIBRATION Revision B
EQUIVALENT STATIC LOADS FOR RANDOM VIBRATION Revision B By Tom Irvine February 20, 2001 Email: tomirvine@aol.com Introduction A particular engineering design problem is to determine the equivalent static
More informationMULTI-STAGE SUBORBITAL LAUNCHER MODAL AND DYNAMIC TEST PROGRAM
Review of the Air Force Academy No 3 (30) 2015 MULTI-STAGE SUBORBITAL LAUNCHER MODAL AND DYNAMIC TEST PROGRAM Mihai MIHAILA-ANDRES*, Flore LICA*, Paul-Virgil ROSU** * Institute for Theoretical & Experimental
More informationModal and Static Structural Analysis of Exhaust Collector Box for Compressor test facility
Modal and Static Structural Analysis of Exhaust Collector Box for Compressor test facility Shankar Gouda 1, Praveen M P 2 P G student, Department of Mechanical Engineering, EPCET, Bangalore, Karnataka,
More information#SEU16. FEA in Solid Edge and FEMAP Mark Sherman
FEA in Solid Edge and FEMAP Mark Sherman Realize innovation. FEMAP Continuous development with the same core team! Since 1985 there have been more than 35 releases of FEMAP with only one major architecture
More informationD && 9.0 DYNAMIC ANALYSIS
9.0 DYNAMIC ANALYSIS Introduction When a structure has a loading which varies with time, it is reasonable to assume its response will also vary with time. In such cases, a dynamic analysis may have to
More informationTransducer Design and Modeling 42 nd Annual UIA Symposium Orlando Florida Jay Sheehan JFS Engineering. 4/23/2013 JFS Engineering
42 nd Annual UIA Symposium Orlando Florida 2013 Jay Sheehan JFS Engineering Introduction ANSYS Workbench Introduction The project format Setting up different analysis Static, Modal and Harmonic Connection
More informationDynamic Loads CE 543. Examples. Harmonic Loads
CE 543 Structural Dynamics Introduction Dynamic Loads Dynamic loads are time-varying loads. (But time-varying loads may not require dynamic analysis.) Dynamics loads can be grouped in one of the following
More information25/01/2013. Agenda. Advanced Approaches to Modeling and Assessment of Floors for Control of Human Activity. Ultra-Low Vibration Environments
// Advanced Approaches to Modeling and Assessment of Floors for Control of Human Activity Brad Pridham, Ph.D., P.Eng. February, Finite Element Modeling Application Example Air Quality Wind & Climate Sound,
More informationStructural Analysis of Truss Structures using Stiffness Matrix. Dr. Nasrellah Hassan Ahmed
Structural Analysis of Truss Structures using Stiffness Matrix Dr. Nasrellah Hassan Ahmed FUNDAMENTAL RELATIONSHIPS FOR STRUCTURAL ANALYSIS In general, there are three types of relationships: Equilibrium
More informationCode_Aster. SDLX02 - Piping: Problem of Hovgaard. Spectral analysis
Titre : SDLX02 - Tuyauterie : Problème de Hovgaard. Analys[...] Date : 09/07/2015 Page : 1/12 SDLX02 - Piping: Problem of Hovgaard. Spectral analysis Summary: The three-dimensional problem consists firstly,
More informationExample 37 - Analytical Beam
Example 37 - Analytical Beam Summary This example deals with the use of RADIOSS linear and nonlinear solvers. A beam submitted to a concentrated load on one extremity and fixed on the other hand is studied.
More information2008 International ANSYS Conference
2008 International ANSYS Conference Nonlinear Piezoelectric Analysis with ANSYS-MATLAB/Simulink coupling Masahiro Matsumoto Cybernet Systems Co., Ltd 2008 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc.
More informationDynamic (Vibrational) and Static Structural Analysis of Ladder Frame
Dynamic (Vibrational) and Static Structural Analysis of Ladder Frame Ketan Gajanan Nalawade 1, Ashish Sabu 2, Baskar P 3 School of Mechanical and building science, VIT University, Vellore-632014, Tamil
More informationCode_Aster. SDLX02 - Piping: Problem of Hovgaard. Spectral analysis
Titre : SDLX02 - Tuyauterie : Problème de Hovgaard. Analys[...] Date : 03/05/2016 Page : 1/10 SDLX02 - Piping: Problem of Hovgaard. Spectral analysis Summary: The three-dimensional problem consists firstly,
More informationAnalysis of a Casted Control Surface using Bi-Linear Kinematic Hardening
Analysis of a Casted Control Surface using Bi-Linear Kinematic Hardening Abdul Manan Haroon A. Baluch AERO, P.O Box 91, Wah Cantt. 47040 Pakistan Abstract Control Surfaces or Fins are very essential parts
More informationNUMERICAL MODELLING OF RUBBER VIBRATION ISOLATORS
NUMERICAL MODELLING OF RUBBER VIBRATION ISOLATORS Clemens A.J. Beijers and André de Boer University of Twente P.O. Box 7, 75 AE Enschede, The Netherlands email: c.a.j.beijers@utwente.nl Abstract An important
More informationFlow-Induced Vibration Modeling
Flow-Induced Vibration Modeling Bin Zhu, Hector H. Mireles, and Aqib Qureshi Baker Hughes Abstract: The current work pertains to a re-closeable annular flow valve oil completion tool (X- AFV) with high
More informationRecent Advances in Seismic Soil-Structure Interaction Analysis of NPPs
Recent Advances in Seismic Soil-Structure Interaction Analysis of NPPs Mansour Tabatabaie, Ph.D., P.E. SC Solutions NEA/CSNI-IAGE / IAEA ISSC SSI Workshop Ottawa, Canada October 6-8, 2010 SSI ANALYSIS
More informationDynamic Analysis Contents - 1
Dynamic Analysis Contents - 1 TABLE OF CONTENTS 1 DYNAMIC ANALYSIS 1.1 Overview... 1-1 1.2 Relation to Equivalent-Linear Methods... 1-2 1.2.1 Characteristics of the Equivalent-Linear Method... 1-2 1.2.2
More informationMeasurement and Prediction of the Dynamic Behaviour of Laminated Glass
Paper 173 Measurement and Prediction of the Dynamic Behaviour of Laminated Glass Civil-Comp Press, 2012 Proceedings of the Eleventh International Conference on Computational Structures Technology, B.H.V.
More informationStochastic Dynamics of SDOF Systems (cont.).
Outline of Stochastic Dynamics of SDOF Systems (cont.). Weakly Stationary Response Processes. Equivalent White Noise Approximations. Gaussian Response Processes as Conditional Normal Distributions. Stochastic
More informationExperimental Modal Analysis of a Flat Plate Subjected To Vibration
American Journal of Engineering Research (AJER) 2016 American Journal of Engineering Research (AJER) e-issn: 2320-0847 p-issn : 2320-0936 Volume-5, Issue-6, pp-30-37 www.ajer.org Research Paper Open Access
More informationNonlinear Modeling for Health Care Applications Ashutosh Srivastava Marc Horner, Ph.D. ANSYS, Inc.
Nonlinear Modeling for Health Care Applications Ashutosh Srivastava Marc Horner, Ph.D. ANSYS, Inc. 2 Motivation 12 Motivation Linear analysis works well for only small number of applications. The majority
More informationViscoelastic vibration damping identification methods. Application to laminated glass.
Viscoelastic vibration damping identification methods. Application to laminated glass. J. Barredo a *, M. Soriano b, M. S. Gómez b, L. Hermanns' 5 "Centre for Modelling in Mechanical Engineering (CEMIMF2I2),
More information2008 International ANSYS Conference
2008 International ANSYS Conference Plastic Injection Molding Using ANSYS Sarah Luo Ph.D. Senior. Mechanical Engineer Aurora Optical Inc. Daniel Robinson Senior Consulting Engineer PADT Inc. 2008 ANSYS,
More informationEXPLICIT DYNAMIC SIMULATION OF DROP-WEIGHT LOW VELOCITY IMPACT ON CARBON FIBROUS COMPOSITE PANELS
EXPLICIT DYNAMIC SIMULATION OF DROP-WEIGHT LOW VELOCITY IMPACT ON CARBON FIBROUS COMPOSITE PANELS Umar Farooq and Karl Gregory School of Built Environment and Department of Engineering, University of Bolton,
More informationCHARACTERISATION OF VIBRATORY, PULSATION AND NOISE SOURCES
CHARACTERISATION OF VIBRATORY, PULSATION AND NOISE SOURCES Goran Pavić INSA Lyon, France CAV April 2017 0/20 scope Objectives: predict the transmission source surroundings allow meaningful specs formulation
More informationStructural Dynamics Lecture 7. Outline of Lecture 7. Multi-Degree-of-Freedom Systems (cont.) System Reduction. Vibration due to Movable Supports.
Outline of Multi-Degree-of-Freedom Systems (cont.) System Reduction. Truncated Modal Expansion with Quasi-Static Correction. Guyan Reduction. Vibration due to Movable Supports. Earthquake Excitations.
More informationTheoretical Manual Theoretical background to the Strand7 finite element analysis system
Theoretical Manual Theoretical background to the Strand7 finite element analysis system Edition 1 January 2005 Strand7 Release 2.3 2004-2005 Strand7 Pty Limited All rights reserved Contents Preface Chapter
More informationModal Analysis: What it is and is not Gerrit Visser
Modal Analysis: What it is and is not Gerrit Visser What is a Modal Analysis? What answers do we get out of it? How is it useful? What does it not tell us? In this article, we ll discuss where a modal
More informationRandom vibration analysis and fatigue life evaluation of auxiliary heater bracket
Random vibration analysis and fatigue life evaluation of auxiliary heater bracket Arshad Khan, Devashish Sarkar, Reshad Ahmar and Hitenkumar Patel Larsen and Toubro Integrated Engineering Services, INDIA
More information2008 International ANSYS Conference
2008 International ANSYS Conference Study of Nonlinear Parametric Response in a Beam using ANSYS Satish Remala, John Baker, and Suzanne Smith University of Kentucky 2008 ANSYS, Inc. All rights reserved.
More informationRandom Vibration Fatigue Analysis of a Notched Aluminum Beam
Int. J. Mech. Eng. Autom. Volume, Number 10, 015, pp. 45-441 Received: August 6, 015; Published: October 5, 015 International Journal of Mechanical Engineering and Automation Random Vibration Fatigue Analysis
More informationCoupled Field Analysis using the ANSYS/Multiphysics Commercial FEA Code
Industry Sector RTD Thematic Area Date Deliverable Nr Consumer Goods Multi Physics and Analysis 11th Sept 2002 Coupled Field Analysis using the ANSYS/Multiphysics Commercial FEA Code David Ellis Idac Ltd,
More information[Hasan*, 4.(7): July, 2015] ISSN: (I2OR), Publication Impact Factor: 3.785
IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY FINITE ELEMENT ANALYSIS AND FATIGUE ANALYSIS OF SPUR GEAR UNDER RANDOM LOADING Shaik Gulam Abul Hasan*, Ganoju Sravan Kumar, Syeda
More informationALASKA ENERGY AUTHORITY AEA ENGINEERING FEASIBILITY REPORT. Appendix B8. Finite Element Analysis
ALASKA ENERGY AUTHORITY AEA11-022 ENGINEERING FEASIBILITY REPORT Appendix B8 Finite Element Analysis Susitna-Watana Hydroelectric Project Alaska Energy Authority FERC Project No. 14241 December 2014 Seismic
More informationBerechnung von Werkzeugmaschinen in der ANSYS Umgebung. Roberto Rossetti, CADFEM (Suisse) AG
Berechnung von Werkzeugmaschinen in der ANSYS Umgebung Roberto Rossetti, CADFEM (Suisse) AG Machine tool simulation in the ANSYS environment - 1 - Overview Stiffness analysis Harmonic analysis Weight influence
More informationGrandstand Terraces. Experimental and Computational Modal Analysis. John N Karadelis
Grandstand Terraces. Experimental and Computational Modal Analysis. John N Karadelis INTRODUCTION Structural vibrations caused by human activities are not known to be particularly damaging or catastrophic.
More informationContent. Department of Mathematics University of Oslo
Chapter: 1 MEK4560 The Finite Element Method in Solid Mechanics II (January 25, 2008) (E-post:torgeiru@math.uio.no) Page 1 of 14 Content 1 Introduction to MEK4560 3 1.1 Minimum Potential energy..............................
More informationSDLV302 Modal analysis by under-structuring: bi-- supported beam
Titre : SDLV302 Analyse modale par sous-structuration : [...] Date : 21/07/2017 age : 1/10 SDLV302 Modal analysis by under-structuring: bi-- supported beam Summary: This test validates the modal analysis
More informationStress analysis of a stepped bar
Stress analysis of a stepped bar Problem Find the stresses induced in the axially loaded stepped bar shown in Figure. The bar has cross-sectional areas of A ) and A ) over the lengths l ) and l ), respectively.
More informationEQUIVALENT STATIC LOADS FOR RANDOM VIBRATION Revision M
EQUIVALENT STATIC LOADS FOR RANDOM VIBRATION Revision M By Tom Irvine Email: tomirvine@aol.com October 8, 010 The following approach in the main text is intended primarily for single-degree-of-freedom
More informationOptimizing Solar Thermal Power Plants: Influences on Parabolic Mirror Shape Accuracy
Optimizing Solar Thermal Power Plants: Influences on Parabolic Mirror Shape Accuracy Simon Schneider DLR (German Aerospace Center), Institute of Solar Research, Cologne ANSYS Conference & 33. CADFEM Users
More informationCHAPTER 8 FATIGUE LIFE ESTIMATION OF ELECTRONIC PACKAGES SUBJECTED TO DYNAMIC LOADS
80 CHAPTER 8 FATIGUE LIFE ESTIMATIO OF ELECTROIC PACKAGES SUBJECTED TO DYAMIC LOADS 8. ITRODUCTIO Vibration environments can often involve millions of stress cycles because natural frequencies in electronics
More informationBack Matter Index The McGraw Hill Companies, 2004
INDEX A Absolute viscosity, 294 Active zone, 468 Adjoint, 452 Admissible functions, 132 Air, 294 ALGOR, 12 Amplitude, 389, 391 Amplitude ratio, 396 ANSYS, 12 Applications fluid mechanics, 293 326. See
More informationPiezoelectric Resonators ME 2082
Piezoelectric Resonators ME 2082 Introduction K T : relative dielectric constant of the material ε o : relative permittivity of free space (8.854*10-12 F/m) h: distance between electrodes (m - material
More informationStatic and Modal Analysis of Telescope Frame in Satellite
Abstract Static and Modal Analysis of Telescope Frame in Satellite Sun Libin Department of Mechanical Engineering Tsinghua University Feng Hui School of Material Science and Engineering University of Science
More informationAirframe Structural Modeling and Design Optimization
Airframe Structural Modeling and Design Optimization Ramana V. Grandhi Distinguished Professor Department of Mechanical and Materials Engineering Wright State University VIM/ITRI Relevance Computational
More informationF.M. with Finite Element analysis - Different calculation techniques + Numerical examples (ANSYS Apdl) 2/2
Task 6 - Safety Review and Licensing On the Job Training on Stress Analysis F.M. with Finite Element analysis - Different calculation techniques + Numerical examples (ANSYS Apdl) 2/2 Davide Mazzini Ciro
More informationAdvantages, Limitations and Error Estimation of Mixed Solid Axisymmetric Modeling
Advantages, Limitations and Error Estimation of Mixed Solid Axisymmetric Modeling Sudeep Bosu TATA Consultancy Services Baskaran Sundaram TATA Consultancy Services, 185 Lloyds Road,Chennai-600086,INDIA
More informationModal and Harmonic Response Analysis of PBGA and S-N Curve Creation of Solder Joints
Sensors & Transducers 2013 by IFSA http://www.sensorsportal.com Modal and Harmonic Response Analysis of PBGA and S-N Curve Creation of Solder Joints 1 Yu Guo, 1 Kailin Pan, 1, 2 Xin Wang, 1, 2 Tao Lu and
More informationVIBRATION ANALYSIS OF AN AUTOMOTIVE SILENCER
VIBRATION ANALYSIS OF AN AUTOMOTIVE SILENCER K. R. Gadre PG Student, Department Mechanical Engg., Sinhgad College of Engineering, Pune T. A. Jadhav Associate Professor, Department Mechanical Engg, Sinhgad
More information6.730 Physics for Solid State Applications
6.730 Physics for Solid State Applications Lecture 5: Specific Heat of Lattice Waves Outline Review Lecture 4 3-D Elastic Continuum 3-D Lattice Waves Lattice Density of Modes Specific Heat of Lattice Specific
More informationDYNAMIC CHARACTERISTICS OF A PARTIALLY FLUID- FILLED CYLINDRICAL SHELL
DOI: 10.5516/NET.2011.43.2.167 DYNAMIC CHARACTERISTICS OF A PARTIALLY FLUID- FILLED CYLINDRICAL SHELL MYUNG JO JHUNG *1, SEON OH YU 1, and YEONG TAEK LIM 2 1 Safety Research Division, Korea Institute of
More informationSHOCK AND VIBRATION RESPONSE SPECTRA COURSE Unit 1B. Damping
SHOCK AND VIBRATION RESPONSE SPECTRA COURSE Unit 1B. Damping By Tom Irvine Introduction Recall the homework assignment from Unit 1A. The data.txt time history represented a rocket vehicle dropped from
More informationOctober 30-31, 2014 Paris
October 30-31, 2014 Paris Rittal Open Rack Solution Andy Gill & Paul Clements Rittal VP Engineering (Andy), Lead Design Engineer (Paul) Rack - Overview Key Rack Features Include : - Loading to 1400KG 2
More information