Multiparameter optimization of an ERL. injector
|
|
- Helena Hodge
- 6 years ago
- Views:
Transcription
1 Multiparameter optimization of an ERL injector R. Hajima a, R. Nagai a a Japan Atomic Energy Research Institute, Tokai-mura, Ibaraki Japan Abstract We present multiparameter optimization of an ERL injector. Two approaches, knowledge-based optimization with down-hill simplex and all-at-once optimization with simulated annealing are used. Both approaches show sufficiently good results. Key words: optimization, energy recovery linac, injector PACS: Bd, Ja 1 Introduction An ERL injector consists of an electron gun, a drive laser, buncher and booster cavities, solenoid magnets, quadrupole magnets and dipole magnets, etc. In order to obtain a high-brightness electron beam, these components should be operated with appropriate parameters. However, finding an optimum set of parameters for an ERL injector is rather difficult because of a large number of parameters. Corresponding author. hajima@popsvr.tokai.jaeri.go.jp Preprint submitted to Elsevier Science 26 September 2005
2 We apply two kind of mathematical approaches to the optimization of an ERL injector, which has multiple design parameters. One is a knowledge-based approach, where the parameters are optimized from the upstream to the downstream step-by-step with a help of apriori knowledge of the beam dynamics such as bunch compression and emittance compensation. The other is an allat-once approach, in which all the parameters are optimized simultaneously without any apriori knowledge. 2 Optimization procedure A beam dynamics code with a capability of simulating the space charge force is required for designing an ERL injector. We employ the simulation code PARMELA[1] for this purpose. PARMELA is one of the standard simulation codes for electron accelerators and has many users in the world. However, a routine for parameter optimization is not included in PARMELA. This is because the particle tracking was a rather difficult task for computers in 1980s, when PARMELA was developed, and it was almost impossible to make simulations iteratively for optimization. Owing to the great improvement of computer performance for these twenty years, now we can run PARMELA simulations iteratively even on a notebook PC. In the following work, we treat PARMELA as a black box and all the optimization routines are integrated in a wrapper script and a post-processor. The wrapper script written in Perl manages the optimization processes. The wrapper script interprets a master input file and generates an input file for each PARMELA run. In the master file, optimization commands are embedded as comment sentences of a standard PARMELA input file, which specify an objective func- 2
3 tion and parameters to vary for the optimization. After each PARMELA run, a post-processor extracts simulation results from a binary output file. The post-processor written in Java originated from another simulation code [2]. The wrapper script receives the simulation results from the post-processor and generates another input file for the next run. This procedure is repeated till the objective function is minimized. 3 Example of an ERL injector We carried out optimization of a 5-MeV ERL injector as shown in fig.1. The injector is driven at 1.3 GHz and consists of a 500-kV DC-gun, a single-cell buncher, a booster cavity (3-cell x 5), two solenoid magnets, five quadrupole magnets and a 3-dipole merger. The bending radius of the dipole magnets is 1 m, the bending angle is 15 degrees for the first and third magnets and 22 degrees for the second magnet, and the drift between magnets is m. The second magnet has edge angle rotation of 20 degrees. In the knowledge-based optimization, the parameters of the injector components are determined from the upstream to the downstream. Firstly, two solenoid magnets are tuned to obtain a small emittance at the booster entrance, that is emittance compensation. Secondly, the amplitude and phase of the buncher and the booster are optimized so that we have appropriate bunch length and small energy spread before the merger, that is bunch compression. Thirdly, the strength of the quadrupole magnets is varied to minimize the transverse emittance after the merger, where the emittance growth depends on a beam envelope in the merger[3]. These procedure can be repeated for a better solution. We employ the down-hill simplex method[4] in this procedure 3
4 to find a global optimum of the objective function without falling into local optima. In this optimization, the drive laser parameters and position of each component are fixed. Figure 2 shows the result of optimization of transverse focusing parameters that is one of the steps in the total optimization procedure. Seven parameters (2 solenoids and 5 quadrupoles) are varied to minimize the sum of the transverse emittances, ε x + ε y, after accelerating to 72 MeV by main linac. The bunch parameters are chosen as follows: the effective cathode temperature is 35 mev, the laser spot radius on the cathode is 0.5 mm, the bunch length at the cathode is 14 ps (rms, Gaussian), and the bunch charge is 7.7 pc. The calculated thermal emittance at the cathode is mm-mrad. The buncher and booster are tuned so that the bunch is 3 ps (rms) long at 72 MeV. The optimization process converges within iterations as shown in fig.2. The best result after 5 sequences of optimization with a different seed of random numbers is ε x = 0.11 mm-mrad and ε y = mm-mrad. From similar optimization for a 77 pc bunch, we obtain ε x = 1.2 mm-mrad and ε y = 0.99 mmmrad. In these optimization, an initial set of the focusing parameters is determined from a matched envelope in the merger, which gives the minimum emittance growth in the merger[3]. This matched envelope is not consistent with a condition minimizing total emittance growth from the cathode to the main linac because an electron bunch suffers the emittance growth immediately after the bunch generation at the cathode. However, the matched envelope obtained from the merger calculation is a reasonable condition to start the optimization of transverse focusing from the gun to the main linac. 4
5 For multiparameter optimization in accelerator applications, various algorithms have been employed including simulated annealing (SA)[5], genetic algorithm (GA)[6], etc. Recently, optimization of an ERL injector using GA was reported[7]. In the present work, we utilize SA for the all-at-once optimization of an ERL injector, in which 20 parameters are varied to achieve an optimum emittance and bunch length at the main linac. Although SA can be applied to multiobjective optimization[8], we use a single objective function, which is a weighted sum of multiple objective functions. Figure 3 shows optimization results obtained by SA, where the transverse emittance, bunch length and energy spread are plotted from the gun to the main linac exit (72 MeV). The target values of emittance and bunch length, 0.1 mm-mrad and 3 ps, are attained successfully after 9000 iterations. The energy spread grows rapidly in the main linac because we have no constraint on the energy spread in this optimization. The energy spread can be made sufficiently small by tuning the phase of the main linac manually. 4 Summary Two approaches, knowledge-based optimization by down-hill simplex method and all-at-once optimization by simulated annealing, showed sufficiently good results. After the optimization of a 5-MeV injector, normalized emittances of 0.1 mm-mrad for a 7.7 pc bunch and 1 mm-mrad for a 77 pc bunch were achieved. These results will be further improved by optimization involving parameters fixed in the present study: drive laser profile, position of beam transport elements, etc. 5
6 Acknowledgment The authors acknowledge JPPS for financial support. References [1] J. H. Billen, Los Alamos Accelerator Code Group, LA-UR , version [2] R. Hajima, Proc. of the 1998 International Computational Accelerator Physics Conference, SLAC-R-580, C (1998). [3] R. Hajima, in these Proceedings. [4] W.H. Press et al., Numerical Recipes in C second edition, Cambridge University Press (1992), p.408. [5] M.S. Curtin et al., Nucl. Instr. Meth. A272 (1988) 187; R. Baartman et al., Proc. PAC-1997, [6] R. Hajima et al., Nucl. Instr. Meth. A318 (1992) 822; D. Schirmer et al., Proc. PAC-1995, [7] I.V. Bazarov and C.K. Sinclair, Phys. Rev. ST Accel. Beams 8 (2005) [8] P. Czyzak and A. Jaszkiewicz, J. Multi-Criteria Decision Analysis, 7 (1989) 34. 6
7 gun buncher solenoid Quad. x 5 booster (3-cell x 5) 3-dipole merger Fig. 1. A 5-MeV ERL injector. 7
8 2 ε x + ε y (mm-mrad) iterlation Fig. 2. Optimization of transverse focusing parameters (2 solenoid magnets and 5 quadrupole magnets). Results for 5 sequences with a different seed of random numbers are plotted. 8
9 ε x, ε y (mm-mrad) ε x ε y s (m) σ t (ps) σ E (kev) s (m) Fig. 3. Results of optimization by SA. Transverse emittance, bunch length and energy spread are plotted from the gun to the main linac exit (72 MeV). 9
Using IMPACT T to perform an optimization of a DC gun system Including merger
Using IMPACT T to perform an optimization of a DC gun system Including merger Xiaowei Dong and Michael Borland Argonne National Laboratory Presented at ERL09 workshop June 10th, 2009 Introduction An energy
More informationASTRA BASED SWARM OPTIMIZATIONS OF THE BERLinPro INJECTOR
ASTRA BASED SWARM OPTIMIZATIONS OF THE BERLinPro INJECTOR M. Abo-Bakr FRAAC4 Michael Abo-Bakr 2012 ICAP Warnemünde 1 Content: Introduction ERL s Introduction BERLinPro Motivation Computational Aspects
More informationInvestigation of the Effect of Space Charge in the compact-energy Recovery Linac
Investigation of the Effect of Space Charge in the compact-energy Recovery Linac Ji-Gwang Hwang and Eun-San Kim, Kyungpook National University. 1370 Sankyok-dong, Buk-ku, Daegu, 702-701, Korea Tsukasa
More informationICFA ERL Workshop Jefferson Laboratory March 19-23, 2005 Working Group 1 summary Ilan Ben-Zvi & Ivan Bazarov
ICFA ERL Workshop Jefferson Laboratory March 19-23, 2005 Working Group 1 summary Ilan Ben-Zvi & Ivan Bazarov Sincere thanks to all WG1 participants: Largest group, very active participation. This summary
More informationTransverse emittance measurements on an S-band photocathode rf electron gun * Abstract
SLAC PUB 8963 LCLS-01-06 October 2001 Transverse emittance measurements on an S-band photocathode rf electron gun * J.F. Schmerge, P.R. Bolton, J.E. Clendenin, F.-J. Decker, D.H. Dowell, S.M. Gierman,
More informationSimulations for photoinjectors C.Limborg
Simulations for photoinjectors C.Limborg 1- GTF Simulations Parmela modeling improvements Comparison to experimental results: 2ps & 4ps Sensitivity study Plans for future simulations 2- LCLS Injector Simulations
More informationMultivariate Optimization of High Brightness High Current DC Photoinjector. Ivan Bazarov
Multivariate Optimization of High Brightness High Current DC Photoinjector Ivan Bazarov Talk Outline: Motivation Evolutionary Algorithms Optimization Results 1 ERL Injector 750 kv DC Gun Goal: provide
More informationMultivariate Optimization of High Brightness High Current DC Photoinjector. Ivan Bazarov Cornell University
Multivariate Optimization of High Brightness High Current DC Photoinjector Ivan Bazarov Cornell University Talk Outline: Motivation Parallel Evolutionary Algorithms Results & Outlook Ivan Bazarov, Multivariate
More informationAccelerator Physics Issues of ERL Prototype
Accelerator Physics Issues of ERL Prototype Ivan Bazarov, Geoffrey Krafft Cornell University TJNAF ERL site visit (Mar 7-8, ) Part I (Bazarov). Optics. Space Charge Emittance Compensation in the Injector
More informationLongitudinal Measurements at the SLAC Gun Test Facility*
SLAC-PUB-9541 September Longitudinal Measurements at the SLAC Gun Test Facility* D. H. Dowell, P. R. Bolton, J.E. Clendenin, P. Emma, S.M. Gierman, C.G. Limborg, B.F. Murphy, J.F. Schmerge Stanford Linear
More informationTolerances for magnetic fields in the Gun-To-Linac region of the LCLS Injector *
Tolerances for magnetic fields in the Gun-To-Linac region of the LCLS Injector * C.Limborg-Deprey January 10, 2006 Abstract In this technical note, we review the computations which led to the tolerances
More informationA Low Energy Beam Transport Design with high SCC for TAC Proton Accelerator
A Low Energy Beam Transport Design with high SCC for TAC Proton Accelerator * A. Caliskan 1, H. F. Kisoglu 2, S. Sultansoy 3,4, M. Yilmaz 5 1 Department of Engineering Physics, Gumushane University, Gumushane,
More informationPhysical design of FEL injector based on performance-enhanced EC-ITC RF gun
Accepted by Chinese Physics C Physical design of FEL injector based on performance-enhanced EC-ITC RF gun HU Tong-ning( 胡桐宁 ) 1, CHEN Qu-shan( 陈曲珊 ) 1, PEI Yuan-ji( 裴元吉 ) 2; 1), LI Ji( 李骥 ) 2, QIN Bin(
More informationLCLS Injector Straight Ahead Spectrometer C.Limborg-Deprey Stanford Linear Accelerator Center 8 th June 2005
LCLS Injector Straight Ahead Spectrometer C.Limborg-Deprey Stanford Linear Accelerator Center 8 th June 2005 Summary The spectrometer design was modified to allow the measurement of uncorrelated energy
More informationSwissFEL INJECTOR DESIGN: AN AUTOMATIC PROCEDURE
Proceedings of FEL03, New York, NY, USA SwissFEL INJECTOR DESIGN: AN AUTOMATIC PROCEDURE S. Bettoni, M. Pedrozzi, S. Reiche, PSI, Villigen, Switzerland Abstract The first section of FEL injectors driven
More informationIntroduction. Thermoionic gun vs RF photo gun Magnetic compression vs Velocity bunching. Probe beam design options
Introduction Following the 19/05/04 meeting at CERN about the "CTF3 accelerated programme", a possible french contribution has been envisaged to the 200 MeV Probe Beam Linac Two machine options were suggested,
More informationInjector Experimental Progress
Injector Experimental Progress LCLS TAC Meeting December 10-11 2001 John Schmerge for the GTF Team GTF Group John Schmerge Paul Bolton Steve Gierman Cecile Limborg Brendan Murphy Dave Dowell Leader Laser
More informationLCLS Injector Prototyping at the GTF
LCLS Injector Prototyping at at the GTF John John Schmerge, SLAC SLAC November 3, 3, 23 23 GTF GTF Description Summary of of Previous Measurements Longitudinal Emittance Transverse Emittance Active LCLS
More informationLattice Design of 2-loop Compact ERL. High Energy Accelerator Research Organization, KEK Miho Shimada and Yukinori Kobayashi
Lattice Design of 2-loop Compact ERL High Energy Accelerator Research Organization, KEK Miho Shimada and Yukinori Kobayashi Introduction Wepromote the construction of the compact Energy Recovery Linac(cERL)
More informationLCLS-II SCRF start-to-end simulations and global optimization as of September Abstract
SLAC National Accelerator Lab LCLS-II TN-17-4 February 217 LCLS-II SCRF start-to-end simulations and global optimization as of September 216 G. Marcus SLAC, Menlo Park, CA 9425 J. Qiang LBNL, Berkeley,
More informationFACET-II Design Update
FACET-II Design Update October 17-19, 2016, SLAC National Accelerator Laboratory Glen White FACET-II CD-2/3A Director s Review, August 9, 2016 Planning for FACET-II as a Community Resource FACET-II Photo
More informationDark Current at Injector. Jang-Hui Han 27 November 2006 XFEL Beam Dynamics Meeting
Dark Current at Injector Jang-Hui Han 27 November 2006 XFEL Beam Dynamics Meeting Considerations for the guns Ultra-low slice emittance of electron beams higher gradient at the gun cavity solenoid field
More informationSRF GUN CHARACTERIZATION - PHASE SPACE AND DARK CURRENT MEASUREMENTS AT ELBE*
SRF GUN CHARACTERIZATION - PHASE SPACE AND DARK CURRENT MEASUREMENTS AT ELBE* E. Panofski #, A. Jankowiak, T. Kamps, Helmholtz-Zentrum Berlin, Berlin, Germany P.N. Lu, J. Teichert, Helmholtz-Zentrum Dresden-Rossendorf,
More informationGeometry Optimization of DC and SRF Guns to Maximize Beam Brightness
Geometry Optimization of and SRF Guns to Maximize Beam Brightness M.N. Lakshmanan and I.V. Bazarov, CLASSE, Cornell University, Ithaca, NY 14853, USA T. Miyajima, Photon Factory, KEK, Tsukuba, Japan Abstract
More informationBeam Emittance in the ERL Injector Prototype
Beam Emittance in the ERL Injector Prototype Peter Battaglino Physics Department, Carnegie Mellon University, Pittsburgh, PA, 53 (Dated: August 8, 3) The number of parameters which influence the beam emittance
More informationAlignment requirement for the SRF cavities of the LCLS-II injector LCLSII-TN /16/2014
Alignment requirement for the SRF cavities of the LCLS-II injector LCLS-II TN-14-16 12/16/2014 R. K. Li, C. Papadopoulos, T. O. Raubenheimer, J. F. Schmerge, and F. Zhou December 16, 2014 LCLSII-TN-14-16
More informationCornell Injector Performance
Cornell Injector Performance Adam Bartnik 1 Cornell Injector Performance as an ERL injector 2 Cornell Injector Performance as an ERL injector as an FEL injector (e.g. LCLS-II) as an injector for EIC applications
More informationSTATUS OF THE NOVOSIBIRSK ENERGY RECOVERY LINAC
STATUS OF THE NOVOSIBIRSK ENERGY RECOVERY LINAC V.P. Bolotin, N.A. Vinokurov, N.G. Gavrilov, D.A. Kayran, B.A. Knyazev, E.I. Kolobanov, V. V. Kotenkov, V.V. Kubarev, G.N. Kulipanov, A.N. Matveenko, L.E.
More informationCharacterization of an 800 nm SASE FEL at Saturation
Characterization of an 800 nm SASE FEL at Saturation A.Tremaine*, P. Frigola, A. Murokh, C. Pellegrini, S. Reiche, J. Rosenzweig UCLA, Los Angeles, CA 90095 M. Babzien, I. Ben-Zvi, E. Johnson, R. Malone,
More informationBERLinPro. An ERL Demonstration facility at the HELMHOLTZ ZENTRUM BERLIN
BERLinPro An ERL Demonstration facility at the HELMHOLTZ ZENTRUM BERLIN BERLinPro: ERL demonstration facility to prepare the ground for a few GeV ERL @ Berlin-Adlershof Goal: 100MeV, 100mA beam Small emittance,
More informationOPTIMIZING RF LINACS AS DRIVERS FOR INVERSE COMPTON SOURCES: THE ELI-NP CASE
OPTIMIZING RF LINACS AS DRIVERS FOR INVERSE COMPTON SOURCES: THE ELI-NP CASE C. Vaccarezza, D. Alesini, M. Bellaveglia, R. Boni, E. Chiadroni, G. Di Pirro, M. Ferrario, A. Gallo, G. Gatti, A. Ghigo, B.
More informationOPTIMIZATION OF COMPENSATION CHICANES IN THE LCLS-II BEAM DELIVERY SYSTEM
OPTIMIZATION OF COMPENSATION CHICANES IN THE LCLS-II BEAM DELIVERY SYSTEM LCLS-II TN-15-41 11/23/2015 J. Qiang, M. Venturini November 23, 2015 LCLSII-TN-15-41 1 Introduction L C L S - I I T E C H N I C
More informationAn ERL-Based High-Power Free- Electron Laser for EUV Lithography
An ERL-Based High-Power Free- Electron Laser for EUV Lithography Norio Nakamura High Energy Accelerator Research Organization(KEK) 2015 EUVL Workshop, Maui, Hawaii, USA, June 15-19, 2015. ERL-EUV Design
More informationExperimental Measurements of the ORION Photoinjector Drive Laser Oscillator Subsystem
Experimental Measurements of the ORION Photoinjector Drive Laser Oscillator Subsystem D.T Palmer and R. Akre Laser Issues for Electron RF Photoinjectors October 23-25, 2002 Stanford Linear Accelerator
More informationPAL LINAC UPGRADE FOR A 1-3 Å XFEL
PAL LINAC UPGRADE FOR A 1-3 Å XFEL J. S. Oh, W. Namkung, Pohang Accelerator Laboratory, POSTECH, Pohang 790-784, Korea Y. Kim, Deutsches Elektronen-Synchrotron DESY, D-603 Hamburg, Germany Abstract With
More informationPhotoinjector design for the LCLS
SLAC-PUB-8962 LCLS-TN-01-05 Revised November 2001 Photoinjector design for the LCLS P.R. Bolton a, J.E. Clendenin a, D.H. Dowell a, M. Ferrario b, A.S. Fisher a, S.M. Gierman a, R.E. Kirby a, P. Krejcik
More informationEmittance and photocathodes
Cornell Laboratory for Accelerator-based ScienceS and Education () Emittance and photocathodes Ivan Bazarov Where we are today Injector performance Ongoing work Venues for improvements Next generation
More information(M. Bowler, C. Gerth, F. Hannon, H. Owen, B. Shepherd, S. Smith, N. Thompson, E. Wooldridge, N. Wyles)
Optics considerations for ERL test facilities Bruno Muratori ASTeC Daresbury Laboratory (M. Bowler, C. Gerth, F. Hannon, H. Owen, B. Shepherd, S. Smith, N. Thompson, E. Wooldridge, N. Wyles) Overview Optics
More informationGTF Transverse and Longitudinal Emittance Data Analysis Technique * J.F. Schmerge, J.E. Clendenin, D.H. Dowell and S.M. Gierman
LCLS-TN-5-19 July 5 GTF Transverse and Longitudinal Emittance Data Analysis Technique * J.F. Schmerge, J.E. Clendenin, D.H. Dowell and S.M. Gierman Abstract The SSRL Gun Test Facility (GTF) was built to
More informationFemto second X ray Pulse Generation by Electron Beam Slicing. F. Willeke, L.H. Yu, NSLSII, BNL, Upton, NY 11973, USA
Femto second X ray Pulse Generation by Electron Beam Slicing F. Willeke, L.H. Yu, NSLSII, BNL, Upton, NY 11973, USA r 2 r 1 y d x z v Basic Idea: When short electron bunch from linac (5MeV, 50pC,100fs)
More informationCERN EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH CTF3 DRIVE BEAM INJECTOR OPTIMISATION
CERN EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH CLIC Note 1060 CTF3 DRIVE BEAM INJECTOR OPTIMISATION - 1 Sh. Sanaye Hajari 1, 2, * H. Shaker 1, 2 and S. Doebert 2 Institute for Research in Fundamental
More informationEXPERIMENTAL STUDIES WITH SPATIAL GAUSSIAN-CUT LASER FOR THE LCLS PHOTOCATHODE GUN*
SLAC-PUB-14571 EXPERIMETAL STUDIES WITH SPATIAL GAUSSIA-CUT LASER FOR THE LCLS PHOTOCATHODE GU* F. Zhou +, A. Brachmann, P. Emma, S. Gilevich, and Z. Huang SLAC ational Accelerator Laboratory, 575 Sand
More informationLow slice emittance preservation during bunch compression
Low slice emittance preservation during bunch compression S. Bettoni M. Aiba, B. Beutner, M. Pedrozzi, E. Prat, S. Reiche, T. Schietinger Outline. Introduction. Experimental studies a. Measurement procedure
More informationHIGH CURRENT AND HIGH BRIGHTNESS ELECTRON SOURCES
HIGH CURRENT AND HIGH BRIGHTNESS ELECTRON SOURCES F. Loehl, I. Bazarov, S. Belomestnykh, M. Billing, E. Chojnacki, Z. Conway, J. Dobbins, B. Dunham, R. Ehrlich, M. Forster, S. M. Gruner, C. Gulliford,
More informationNotes on the HIE-ISOLDE HEBT
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH HIE-ISOLDE-PROJECT-Note-13 Notes on the HIE-ISOLDE HEBT M.A. Fraser Abstract The HEBT will need to transfer the beam from the HIE-ISOLDE linac to up to four experimental
More informationNew Electron Source for Energy Recovery Linacs
New Electron Source for Energy Recovery Linacs Ivan Bazarov 20m Cornell s photoinjector: world s brightest electron source 1 Outline Uses of high brightness electron beams Physics of brightness High brightness
More informationDEVELOPMENT OF LARGE SCALE OPTIMIZATION TOOLS FOR BEAM TRACKING CODES*
Proceedings of Hadron Beam 8, Nashville, Tennessee, USA DEVELOPMENT OF LARGE SCALE OPTIMIZATION TOOLS FOR BEAM TRACKING CODES* B. Mustapha # and P. N. Ostroumov Argonne National Laboratory, 97 S. Cass
More informationASTRA simulations of the slice longitudinal momentum spread along the beamline for PITZ
ASTRA simulations of the slice longitudinal momentum spread along the beamline for PITZ Orlova Ksenia Lomonosov Moscow State University GSP-, Leninskie Gory, Moscow, 11999, Russian Federation Email: ks13orl@list.ru
More informationPotential use of erhic s ERL for FELs and light sources ERL: Main-stream GeV e - Up-gradable to 20 + GeV e -
Potential use of erhic s ERL for FELs and light sources Place for doubling energy linac ERL: Main-stream - 5-10 GeV e - Up-gradable to 20 + GeV e - RHIC Electron cooling Vladimir N. Litvinenko and Ilan
More informationS9: Momentum Spread Effects and Bending S9A: Formulation
S9: Momentum Spread Effects and Bending S9A: Formulation Except for brief digressions in S1 and S4, we have concentrated on particle dynamics where all particles have the design longitudinal momentum at
More informationTowards a Low Emittance X-ray FEL at PSI
Towards a Low Emittance X-ray FEL at PSI A. Adelmann, A. Anghel, R.J. Bakker, M. Dehler, R. Ganter, C. Gough, S. Ivkovic, F. Jenni, C. Kraus, S.C. Leemann, A. Oppelt, F. Le Pimpec, K. Li, P. Ming, B. Oswald,
More informationUSPAS Course on Recirculated and Energy Recovered Linacs
USPAS Course on Recirculated and Energy Recovered Linacs I. V. Bazarov Cornell University G. A. Krafft and L. Merminga Jefferson Lab Computer Class: Space Charge in DC Gun ERL Injector USPAS 2005 Recirculated
More informationSimulations of the IR/THz source at PITZ (SASE FEL and CTR)
Simulations of the IR/THz source at PITZ (SASE FEL and CTR) Introduction Outline Simulations of SASE FEL Simulations of CTR Summary Issues for Discussion Mini-Workshop on THz Option at PITZ DESY, Zeuthen
More informationDesign of an RF Photo-Gun (PHIN)
Design of an RF Photo-Gun (PHIN) R. Roux 1, G. Bienvenu 1, C. Prevost 1, B. Mercier 1 1) CNRS-IN2P3-LAL, Orsay, France Abstract In this note we show the results of the RF simulations performed with a 2-D
More informationHigh gradient, high average power structure development at UCLA and Univ. Rome in X-X. band
High gradient, high average power structure development at UCLA and Univ. Rome in X-X and S-S band May 23-25, 25, 2007 US High Gradient Research Collaboration Workshop Atsushi Fukasawa, James Rosenzweig,
More informationFURTHER UNDERSTANDING THE LCLS INJECTOR EMITTANCE*
Proceedings of FEL014, Basel, Switzerland FURTHER UNDERSTANDING THE LCLS INJECTOR EMITTANCE* F. Zhou, K. Bane, Y. Ding, Z. Huang, and H. Loos, SLAC, Menlo Park, CA 9405, USA Abstract Coherent optical transition
More informationCEPC Linac Injector. HEP Jan, Cai Meng, Guoxi Pei, Jingru Zhang, Xiaoping Li, Dou Wang, Shilun Pei, Jie Gao, Yunlong Chi
HKUST Jockey Club Institute for Advanced Study CEPC Linac Injector HEP218 22 Jan, 218 Cai Meng, Guoxi Pei, Jingru Zhang, Xiaoping Li, Dou Wang, Shilun Pei, Jie Gao, Yunlong Chi Institute of High Energy
More informationNovel, Hybrid RF Injector as a High-average. Dinh Nguyen. Lloyd Young
Novel, Hybrid RF Injector as a High-average average-current Electron Source Dinh Nguyen Los Alamos National Laboratory Lloyd Young TechSource Energy Recovery Linac Workshop Thomas Jefferson National Accelerator
More informationDevelopment of Large Scale Optimization Tools for Beam Tracking Codes
Development of Large Scale Optimization Tools for Beam Tracking Codes 42 nd ICFA Advanced Beam Dynamics Workshop: High-Intensity, High-Brightness Hadron Beams HB-2008, August 25-29, 2008 Nashville, Tennessee,
More information$)ODW%HDP(OHFWURQ6RXUFHIRU/LQHDU&ROOLGHUV
$)ODW%HDP(OHFWURQ6RXUFHIRU/LQHDU&ROOLGHUV R. Brinkmann, Ya. Derbenev and K. Flöttmann, DESY April 1999 $EVWUDFW We discuss the possibility of generating a low-emittance flat (ε y
More informationFACET-II Design, Parameters and Capabilities
FACET-II Design, Parameters and Capabilities 217 FACET-II Science Workshop, October 17-2, 217 Glen White Overview Machine design overview Electron systems Injector, Linac & Bunch compressors, Sector 2
More informationBeam Shaping and Permanent Magnet Quadrupole Focusing with Applications to the Plasma Wakefield Accelerator
Beam Shaping and Permanent Magnet Quadrupole Focusing with Applications to the Plasma Wakefield Accelerator R. Joel England J. B. Rosenzweig, G. Travish, A. Doyuran, O. Williams, B. O Shea UCLA Department
More informationPULSE-TO-PULSE TRANSVERSE BEAM EMITTANCE CONTROLLING FOR MLF AND MR IN THE 3-GeV RCS OF J-PARC
THO3AB3 Proceedings of HB, East-Lansing, MI, USA PULSE-TO-PULSE TRANSVERSE BEAM EMITTANCE CONTROLLING FOR MLF AND MR IN THE 3-GeV RCS OF J-PARC P.K. Saha, H. Harada, H. Hotchi and T. Takayanagi J-PARC
More information6 Bunch Compressor and Transfer to Main Linac
II-159 6 Bunch Compressor and Transfer to Main Linac 6.1 Introduction The equilibrium bunch length in the damping ring (DR) is 6 mm, too long by an order of magnitude for optimum collider performance (σ
More informationOptimization of the electron-beam transport in the Israeli tandem FEL
Nuclear Instruments and Methods in Physics Research A 407 (1998) 350 355 Optimization of the electron-beam transport in the Israeli tandem FEL I. Merhasin, A. Abramovich *, Y. Pinhasi, A. Gover, J.S. Sokolowski
More informationLongitudinal phase space tomography and its. implementation in energy recovery linacs
SLAC PUB 11755 Longitudinal phase space tomography and its implementation in energy recovery linacs H. Loos SLAC, 2575 Sand Hill Road, Menlo Park, CA 9425, USA Abstract Applying tomographic techniques
More informationSimple limits on achieving a quasi-linear magnetic compression for an FEL driver
SLAC-PUB-14445 Simple limits on achieving a quasi-linear magnetic compression for an FEL driver Yipeng Sun (yisun@slac.stanford.edu) SLAC National Accelerator Laboratory, Menlo Park, California 94025,
More informationERL FOR LOW ENERGY ELECTRON COOLING AT RHIC (LEREC)*
ERL FOR LOW ENERGY ELECTRON COOLING AT RHIC (LEREC)* J. Kewisch, M. Blaskiewicz, A. Fedotov, D. Kayran, C. Montag, V. Ranjbar Brookhaven National Laboratory, Upton, New York Abstract Low-energy RHIC Electron
More informationINITIAL BEAM RESULTS FROM THE CORNELL HIGH-CURRENT ERL INJECTOR PROTOTYPE
INITIAL BEAM RESULTS FROM THE CORNELL HIGH-CURRENT ERL INJECTOR PROTOTYPE I. Bazarov, S. Belomestnykh, E. Chojnacki, J. Dobbins, B. Dunham, R. Ehrlich, M. Forster, C. Gulliford, G. Hoffstaetter, H. Li,
More informationElectron beam transfer line design for plasma driven Free Electron Lasers
Electron beam transfer line design for plasma driven Free Electron Lasers ABSTRACT M. Rossetti Conti a,b,d, A. Bacci a, A. Giribono c, V. Petrillo b, A.R. Rossi a, L. Serafini a, C. Vaccarezza c a INFN
More informationPhenomena related to the laser incidence on the cathode surface
Phenomena related to the laser incidence on the cathode surface Hiromistu Tomizawa Accelerator Division, Japan Synchrotron Radiation Research Institute (SPring-8) These topics have been discussed in LAAA
More informationTEST MEASUREMENTS WITH THE REX-ISOLDE LINAC STRUCTURES*
TEST MEASUREMENTS WITH THE REX-ISOLDE LINAC STRUCTURES* O. Kester, D. Habs, T. Sieber, S. Emhofer, K. Rudolph, LMU München, Garching Germany R. von Hahn, H. Podlech, R. Repnow, D. Schwalm, MPI- K, Heidelberg,
More informationSimulations of the IR/THz Options at PITZ (High-gain FEL and CTR)
Case Study of IR/THz source for Pump-Probe Experiment at the European XFEL Simulations of the IR/THz Options at PITZ (High-gain FEL and CTR) Introduction Outline Simulations of High-gain FEL (SASE) Simulation
More informationIssues of Electron Cooling
Issues of Electron Cooling Yaroslav Derbenev derbenev@jlab.org JLEIC Spring 2016 Collaboration Meeting JLab, March 29-31, 2016 Outline Friction force Magnetized cooling Misalignment impact Cooling rates
More informationWhat have we learned from the LCLS injector?*
SLAC-PUB-14644 LCLS-TN-11-4 October 19, 2011 What have we learned from the LCLS injector?* Feng Zhou and Axel Brachmann for the LCLS injector team The LCLS injector reliably delivered a high quality electron
More information4 FEL Physics. Technical Synopsis
4 FEL Physics Technical Synopsis This chapter presents an introduction to the Free Electron Laser (FEL) physics and the general requirements on the electron beam parameters in order to support FEL lasing
More informationLOLA: Past, present and future operation
LOLA: Past, present and future operation FLASH Seminar 1/2/29 Christopher Gerth, DESY 8/5/29 FLASH Seminar Christopher Gerth 1 Outline Past Present Future 8/5/29 FLASH Seminar Christopher Gerth 2 Past
More informationSLS at the Paul Scherrer Institute (PSI), Villigen, Switzerland
SLS at the Paul Scherrer Institute (PSI), Villigen, Switzerland Michael Böge 1 SLS Team at PSI Michael Böge 2 Layout of the SLS Linac, Transferlines Booster Storage Ring (SR) Beamlines and Insertion Devices
More informationHigh-Brightness Electron Beam Challenges for the Los Alamos MaRIE XFEL
LA-UR-16-6007 High-Brightness Electron Beam Challenges for the Los Alamos MaRIE XFEL Bruce Carlsten October 7, 016 We expect that energy spread constraint will lead to difficult trades DISCUSSION POINTS:
More informationAnalysis of Slice Transverse Emittance Evolution in a Photocathode RF Gun. Abstract
SLAC PUB 868 October 7 Analysis of Slice Transverse Emittance Evolution in a Photocathode RF Gun Z. Huang, Y. Ding Stanford Linear Accelerator Center, Stanford, CA 9439 J. Qiang Lawrence Berkeley National
More informationLinac optimisation for the New Light Source
Linac optimisation for the New Light Source NLS source requirements Electron beam requirements for seeded cascade harmonic generation LINAC optimisation (2BC vs 3 BC) CSR issues energy chirp issues jitter
More informationAccelerator R&D Opportunities: Sources and Linac. Developing expertise. D. Rubin, Cornell University
Accelerator R&D Opportunities: Sources and Linac D. Rubin, Cornell University Electron and positron sources Requirements Status of R&D Linac Modeling of beam dynamics Development of diagnostic and tuning
More informationDevelopment status of non-destructive assay of nuclear material by using laser Compton scattered gamma-rays
Development status of non-destructive assay of nuclear material by using laser Compton scattered gamma-rays Ryoichi Hajima Japan Atomic Energy Agency IZEST Tokyo 2013 Nov. 18, 2013 Collaborators Quantum
More informationThe New Superconducting RF Photoinjector a High-Average Current & High-Brightness Gun
The New Superconducting RF Photoinjector a High-Average Current & High-Brightness Gun Jochen Teichert for the BESSY-DESY-FZD-MBI collaboration and the ELBE crew High-Power Workshop, UCLA, Los Angeles 14
More informationOverview of Energy Recovery Linacs
Overview of Energy Recovery Linacs Ivan Bazarov Cornell High Energy Synchrotron Source Talk Outline: Historical Perspective Parameter Space Operational ERLs & Funded Projects Challenges ERL Concept: conventional
More informationChad Mitchell Lawrence Berkeley National Laboratory LCLS-II Accelerator Physics Meeting Aug. 19, 2015
Layout Op*ons and Op*miza*on for LCLS- II Injector Design Chad Mitchell Lawrence Berkeley National Laboratory LCLS-II Accelerator Physics Meeting Aug. 19, 2015 Mo*va*on The distance between the second
More informationA Polarized Electron PWT Photoinjector for the ILC
2005 ALCPG & ILC Workshops Snowmass, U.S.A. A Polarized Electron PWT Photoinjector for the ILC David Yu, Yan Luo, Alexei Smirnov, DULY Research Inc., Rancho Palos Verdes, CA 90275 Ivan Bazarov, Cornell
More informationStart-to-End Simulations
AKBP 9.3 Case Study for 100 µm SASE FEL Based on PITZ Accelerator for Pump-Probe Experiment at the European XFEL Start-to-End Simulations Outline Introduction Beam Optimization Beam Transport Simulation
More informationMerger Designs for ERLs
Merger Designs for ERLs Vladimir N. Litvinenko a, Ryoichi Hajima b, Dmitry Kayran a a Brookhaven National Laboratory, Upton, NY 11973, U.S.A b Japan Atomic Energy Research Institute, Tokai-mura, Ibaraki
More informationTHE LCLS-II INJECTOR DESIGN*
THE LCLS-II INJECTOR DESIGN* J.F. Schmerge #, A. Brachmann, D. Dowell, A. Fry, R.K. Li, Z. Li, T. Raubenheimer, T. Vecchione, F. Zhou, SLAC, Menlo Park, CA 94025, USA A. Bartnik, I. Bazarov, B. Dunham,
More informationLow Energy RHIC electron Cooling (LEReC)
Low Energy RHIC electron Cooling (LEReC) LEReC overview: project goal and cooling approach Alexei Fedotov MEIC Collaboration Meeting 30 31 LEReC Project Mission/Purpose The purpose of the LEReC is to provide
More informationLCLS Accelerator Parameters and Tolerances for Low Charge Operations
LCLS-TN-99-3 May 3, 1999 LCLS Accelerator Parameters and Tolerances for Low Charge Operations P. Emma SLAC 1 Introduction An option to control the X-ray FEL output power of the LCLS [1] by reducing the
More informationUSPAS course on Recirculated and Energy Recovered Linacs Ivan Bazarov, Cornell University Geoff Krafft, JLAB. Ongoing ERL R&D Cornell
USPAS course on Recirculated and Energy Recovered Linacs Ivan Bazarov, Cornell University Geoff Krafft, JLAB Ongoing ERL R&D Cornell Contents Challenges Cornell ERL prototype Experimental program January
More informationFirst propositions of a lattice for the future upgrade of SOLEIL. A. Nadji On behalf of the Accelerators and Engineering Division
First propositions of a lattice for the future upgrade of SOLEIL A. Nadji On behalf of the Accelerators and Engineering Division 1 SOLEIL : A 3 rd generation synchrotron light source 29 beamlines operational
More informationarxiv: v1 [physics.acc-ph] 21 Oct 2014
SIX-DIMENSIONAL WEAK STRONG SIMULATIONS OF HEAD-ON BEAM BEAM COMPENSATION IN RHIC arxiv:.8v [physics.acc-ph] Oct Abstract Y. Luo, W. Fischer, N.P. Abreu, X. Gu, A. Pikin, G. Robert-Demolaize BNL, Upton,
More informationInitial Emittance Measurements for Polarized Electron Gun with NEA-GaAs Type Photocathode
Initial Emittance Measurements for Polarized Electron Gun with NEA-GaAs Type Photocathode Naoto Yamamoto*, M. Yamamoto*, R. Sakai*, T. Nakanishi*, S. Okumi*, M. Kuwahara*, K. Tamagaki*, T. Morino*, A.
More informationEmittance Compensation. J.B. Rosenzweig ERL Workshop, Jefferson Lab 3/20/05
Emittance Compensation J.B. Rosenzweig ERL Workshop, Jefferson Lab 3//5 Emittance minimization in the RF photoinjector Thermal emittance limit Small transverse beam size Avoid metal cathodes? " n,th #
More informationEmittance and Quantum Efficiency Measurements from a 1.6 cell S- Band Photocathode RF Gun with Mg Cathode *
LCLS-TN-4-3 SLAC PUB 763 September, 4 Emittance and Quantum Efficiency Measurements from a.6 cell S- Band Photocathode RF Gun with Mg Cathode * J.F. Schmerge, J.M. Castro, J.E. Clendenin, D.H. Dowell,
More informationLaser acceleration of electrons at Femilab/Nicadd photoinjector
Laser acceleration of electrons at Femilab/Nicadd photoinjector P. Piot (FermiLab), R. Tikhoplav (University of Rochester) and A.C. Melissinos (University of Rochester) FNPL energy upgrade Laser acceleration
More informationERL upgrade of an existing X-ray facility: CHESS at CESR
ERL-5-8 ERL upgrade of an existing X-ray facility: CHESS at CESR G.H. Hoffstaetter Abstract Cornell University has proposed an Energy-Recovery Linac (ERL) based synchrotron-light facility which uses 5GeV,
More information