Instrumental technique. Manju C K
|
|
- Justina George
- 6 years ago
- Views:
Transcription
1 Instrumental technique Manju C K
2 CENTRIFUGE
3 A centrifuge is a piece of equipment that puts an object in rotation around a fixed axis (spins it in a circle), applying a potentially strong force perpendicular to the axis of spin (outward). The centrifuge works using the sedimentation principle, where the centripetal acceleration causes denser substances and particles to move outward in the radial direction. At the same time, objects that are less dense are displaced and move to the center. In a laboratory centrifuge that uses sample tubes, the radial acceleration causes denser particles to settle to the bottom of the tube, while low-density substances rise to the top.
4 History English military engineer Benjamin Robins ( ) invented a whirling arm apparatus to determine drag. In 1864, the first dairy centrifuge was introduced to separate cream from milk by Antonin Prandtl. A working butterfat extraction machine was exhibited in A 19th-century hand cranked laboratory
5 What happens to a particle in a centrifugal field The particle (m) is acted on by three forces: FC: the centrifugal force FB: the buoyant force Ff: the frictional force between the particle and the liquid Equation that describes the motion of this particle as follows: F = ma where m is the mass of the particle and a is the acceleration.
6 The Physics of UltraCentrifugation 1.Centrifugal force:- The tube containing the suspension of particles is rotated at a high speed, which exerts a centrifugal force directed from the center of the rotor towards the bottom of the tube. Centrifugal Force: Where, M: mass of particle r: radius of rotation (cm) (ie distance of particle from axis of rotation) ω :Average angular velocity (radians/sec)
7 A more common measurement of F in terms of the earths gravitation force, g, is relative centrifugal force, RCF its defined by RCF = (1.119 x 10-5 (rpm) 2 (r) This equation relates RCF to revolutions per minute of the sample. Equation dictates that the RCF on a sample will vary with r, the distance of the sedimenting particles from the axis of rotation. The RCF value is reported as a number times gravity,g.
8 Instrumentation It consist of two components, an electric motor to spin the sample and a rotor to hold tubes.
9 LOW SPEED CENTRIFUGE Most laboratories have a standard low-speed centrifuge used for routine sedimentation of heavy particles. The low speed centrifuge has a maximum speed of rpm. These instruments usually operate at room temperatures with no means of temperature control. Two types of rotors are used in it, fixed angle and swinging bucket. It is used for sedimentation of red blood cells until the particles are tightly packed into a pellet and supernatant is separated by decantation.
10 HIGH SPEED CENTRIFUGE High speed centrifuges are used in more sophisticated biochemical applications, higher speeds and temperature control of the rotor chamber are essential. The operator of this instrument can carefully control speed and temperature which is required for sensitive biological samples. Three types of rotors are available for high speed centrifugation-fixed angle, swinging bucket, vertical rotors
11 ULTRA CENTRIFUGE It is the most sophisticated instrument Intense heat is generated due to high speed thus the spinning chambers must be refrigerated and kept at high vacuum. It is used for both preparative work and analytical work.
12 CENTRIFUGE Rotor A centrifuge rotor is the rotating unit of the centrifuge, which has fixed holes drilled at an angle. Test tubes are placed inside these holes and the rotor spins to aid in the separation of the materials.
13 Types of Rotor
14 Swing-bucket Rotor Swinging-bucket rotor are used for pelleting, isopycnic studies and rate zonal studies. Tubes are attached to the rotor body by hinge pins or a crossbar. The buckets swing out to a horizontal position. Isopycnic studies (separation as a function of density). Rate zonal studies (separation as a function of sedimentation coefficient).
15 Fixed-angle Rotor Fixed-angle rotors are general-purpose rotors that are especially useful for pelleting subcellular particles and in short column banding of viruses and subcellular organelles. Sedimenting particles have to travel only short time. Tubes are held at an angle (usually 20 to 45 degrees) to the axis of rotation in numbered tube cavities.
16 Vertical rotor Vertical rotors hold tubes parallel to the axis of rotation; therefore, bands separate across the diameter of the tube rather than down the length of the tube. Vertical rotors are useful for isopycnic and, in some cases, rate zonal separations when run time reduction is important.
17 Points to keep in mind
18 Ensure that centrifuge bowls and tubes are dry. Use matched sets of tubes, buckets and other equipment. Ensure that the rotor is properly seated on the drive shaft. Make sure that tubes or containers are properly balanced in the rotor. Do not exceed the rotor s maximum run speed. Close the centrifuge lid during operation.
19 Thank you
Theory module: 11(MCQ) CENTRIFUGATION
Theory module: 11(MCQ) 1. A primary objective of cell fractionation is A. to crack the cell wall so the cytoplasmic contents can be released. B. to identify the enzymes outside the organelles. C. to view
More informationCentrifugation. There are several process functions using centrifuges in biotech separation. These are listed below.
Centrifugation Introduction A centrifuge is a device that separates particles from suspensions or even macromolecules from solutions according to their size, shape and density by subjecting these dispersed
More informationUNIT OPERASI BIOPROSES (UOB)
TPE4211 UNIT OPERASI BIOPROSES (UOB) YUSRON SUGIARTO KULIAH 7 MATERI KULIAH No Pokok Bahasan Waktu (Jam) 1. Pengantar 2. Satuan dimensi 2 x 50 3 Kesetimbangan Massa 2 x 50 4. Kesetimbangan Energi 2 x 50
More informationChapter XII. Special Topics Report Centrifuge Settling & Filtration Theory
Chapter XII. Special Topics Report Centrifuge Settling & Filtration Theory I. Introduction Settling and filtration are two very important operations for separating solids from a liquid solution. With proper
More informationCircular motion minutes. 62 marks. theonlinephysicstutor.com. facebook.com/theonlinephysicstutor Page 1 of 22. Name: Class: Date: Time: Marks:
Circular motion 2 Name: Class: Date: Time: 67 minutes Marks: 62 marks Comments: Page 1 of 22 1 A lead ball of mass 0.25 kg is swung round on the end of a string so that the ball moves in a horizontal circle
More informationCircular Motion 8.01 W04D1
Circular Motion 8.01 W04D1 Next Reading Assignment: W04D2 Young and Freedman: 3.4; 5.4-5.5 Experiment 2: Circular Motion 2 Concept Question: Coastal Highway A sports car drives along the coastal highway
More informationCENTRIFUGATION MODULE 28.1 INTRODUCTION OBJECIVES 28.2 PRINCIPLE. Notes
28 CENTRIFUGATION 28.1 INTRODUCTION A centrifuge is the equipment generally driven by an electric motor that puts an object to rotate around fixed axis, and a perpendicular force is applied to axis. The
More informationCentrifugation. Tubular Bowl Centrifuge. Disc Bowl Centrifuge
CENTRIFUGATION Centrifugation Centrifugation involves separation of liquids and particles based on density. Centrifugation can be used to separate cells from a culture liquid, cell debris from a broth,
More informationCentripetal Force Exploring Uniform Circular Motion
1 Exploring Uniform Circular Motion An object that moves in a circle at constant speed, v, is said to experience uniform circular motion (UCM). The magnitude of the velocity remains constant, but the direction
More informationCentrifugation. Downstream processing assignment. Iida Mäkeläinen Henna Penttinen Jenni Heikkinen Vera Kutiavina
Aalto University The University of the chemical technology CHEM-E3140 - Bioprocess technology II Centrifugation Downstream processing assignment Iida Mäkeläinen Henna Penttinen Jenni Heikkinen Vera Kutiavina
More informationUltra- centrifugation (Gradient centrifugation), Viscometry, UV-VIS absorption spectroscopy, Mass spectrophotometery.
Ultra- centrifugation (Gradient centrifugation), Viscometry, UV-VIS absorption spectroscopy, Mass spectrophotometery Mitesh Shrestha Sedimentation Sedimentation describes the motion of molecules in solutions
More informationLecture 6. Circular Motion. Pre-reading: KJF 6.1 and 6.2. Please take a clicker CIRCULAR MOTION KJF
Lecture 6 Circular Motion Pre-reading: KJF 6.1 and 6.2 Please take a clicker CIRCULAR MOTION KJF 6.1 6.4 Angular position If an object moves in a circle of radius r, then after travelling a distance s
More informationProblem Solving Circular Motion Dynamics Challenge Problems
Problem 1: Double Star System Problem Solving Circular Motion Dynamics Challenge Problems Consider a double star system under the influence of gravitational force between the stars. Star 1 has mass m 1
More informationCentrifugation. There are several process functions using centrifuges in biotech separation. These are listed below.
Centrifugation Introduction A centrifuge is a device that separates particles from suspensions or even macromolecules from solutions according to their size, shape and density by subjecting these dispersed
More informationUniform Circular Motion
Circular Motion Uniform Circular Motion Uniform Circular Motion Traveling with a constant speed in a circular path Even though the speed is constant, the acceleration is non-zero The acceleration responsible
More informationPH201 Chapter 6 Solutions
PH201 Chapter 6 Solutions 6.2. Set Up: Since the stone travels in a circular path, its acceleration is directed toward the center of the circle. The only horizontal force on the stone is the tension of
More informationUniform Circular Motion
Uniform Circular Motion INTRODUCTION Uniform circular motion is the motion of an object traveling at a constant (uniform) speed in a circular path. Besides the speed, there are several other variables
More informationPage 2. Q1.A satellite X is in a circular orbit of radius r about the centre of a spherical planet of mass
Q1. satellite X is in a circular orbit of radius r about the centre of a spherical planet of mass M. Which line, to, in the table gives correct expressions for the centripetal acceleration a and the speed
More informationCutnell/Johnson Physics
Cutnell/Johnson Physics Classroom Response System Questions Chapter 5 Dynamics of Uniform Circular Motion Interactive Lecture Questions 5.1.1. An airplane flying at 115 m/s due east makes a gradual turn
More informationAlgebra Based Physics Uniform Circular Motion
1 Algebra Based Physics Uniform Circular Motion 2016 07 20 www.njctl.org 2 Uniform Circular Motion (UCM) Click on the topic to go to that section Period, Frequency and Rotational Velocity Kinematics of
More informationTutorBreeze.com 7. ROTATIONAL MOTION. 3. If the angular velocity of a spinning body points out of the page, then describe how is the body spinning?
1. rpm is about rad/s. 7. ROTATIONAL MOTION 2. A wheel rotates with constant angular acceleration of π rad/s 2. During the time interval from t 1 to t 2, its angular displacement is π rad. At time t 2
More informationPhys101 Lectures 19, 20 Rotational Motion
Phys101 Lectures 19, 20 Rotational Motion Key points: Angular and Linear Quantities Rotational Dynamics; Torque and Moment of Inertia Rotational Kinetic Energy Ref: 10-1,2,3,4,5,6,8,9. Page 1 Angular Quantities
More informationCentripetal force keeps an object in circular motion Rotation and Revolution
Centripetal force keeps an object in circular motion. 10.1 Rotation and Revolution Two types of circular motion are and. An is the straight line around which rotation takes place. When an object turns
More informationPhysics 12. Unit 5 Circular Motion and Gravitation Part 1
Physics 12 Unit 5 Circular Motion and Gravitation Part 1 1. Nonlinear motions According to the Newton s first law, an object remains its tendency of motion as long as there is no external force acting
More information5. A car moves with a constant speed in a clockwise direction around a circular path of radius r, as represented in the diagram above.
1. The magnitude of the gravitational force between two objects is 20. Newtons. If the mass of each object were doubled, the magnitude of the gravitational force between the objects would be A) 5.0 N B)
More informationRotational Motion Examples:
Rotational Motion Examples: 1. A 60. cm diameter wheel rotates through 50. rad. a. What distance will it move? b. How many times will the wheel rotate in this time? 2. A saw blade is spinning at 2000.
More informationCentripetal force keeps an Rotation and Revolution
Centripetal force keeps an object in circular motion. Which moves faster on a merry-go-round, a horse near the outside rail or one near the inside rail? While a hamster rotates its cage about an axis,
More informationAdvanced Higher Physics. Rotational motion
Wallace Hall Academy Physics Department Advanced Higher Physics Rotational motion Problems AH Physics: Rotational Motion 1 2013 Data Common Physical Quantities QUANTITY SYMBOL VALUE Gravitational acceleration
More informationCircular Motion & Gravitation MC Question Database
(Questions #4,5,6,27,37,38,42 and 58 each have TWO correct answers.) 1) A record player has four coins at different distances from the center of rotation. Coin A is 1 cm away, Coin B is 2 cm away. Coin
More informationLecture PowerPoints. Chapter 5 Physics for Scientists & Engineers, with Modern Physics, 4 th edition. Giancoli
Lecture PowerPoints Chapter 5 Physics for Scientists & Engineers, with Modern Physics, 4 th edition 2009 Pearson Education, Inc. This work is protected by United States copyright laws and is provided solely
More informationPHYSICS 111 SPRING EXAM 2: March 8, 2016; 8:15-9:45 pm
PHYSICS 111 SPRING 2016 EXAM 2: March 8, 2016; 8:15-9:45 pm Name (printed): Recitation Instructor: Section # INSTRUCTIONS: This exam contains 20 multiple-choice questions plus 1 extra credit question,
More informationCIRCULAR MOTION, HARMONIC MOTION, ROTATIONAL MOTION
CIRCULAR MOTION, HARMONIC MOTION, ROTATIONAL MOTION 1 UNIFORM CIRCULAR MOTION path circle distance arc Definition: An object which moves on a circle, travels equal arcs in equal times. Periodic motion
More informationExam I Physics 101: Lecture 08 Centripetal Acceleration and Circular Motion Today s lecture will cover Chapter 5 Exam I is Monday, Oct. 7 (2 weeks!
Exam I Physics 101: Lecture 08 Centripetal Acceleration and Circular Motion http://www.youtube.com/watch?v=zyf5wsmxrai Today s lecture will cover Chapter 5 Exam I is Monday, Oct. 7 ( weeks!) Physics 101:
More informationName St. Mary's HS AP Physics Circular Motion HW
Name St. Mary's HS AP Physics Circular Motion HW Base your answers to questions 1 and 2 on the following situation. An object weighing 10 N swings at the end of a rope that is 0.72 m long as a simple pendulum.
More informationTOPIC D: ROTATION EXAMPLES SPRING 2018
TOPIC D: ROTATION EXAMPLES SPRING 018 Q1. A car accelerates uniformly from rest to 80 km hr 1 in 6 s. The wheels have a radius of 30 cm. What is the angular acceleration of the wheels? Q. The University
More informationCircular Motion. ว Note and Worksheet 2. Recall that the defining equation for instantaneous acceleration is
Circular Motion Imagine you have attached a rubber stopper to the end of a string and are whirling the stopper around your head in a horizontal circle. If both the speed of the stopper and the radius of
More informationUniform Circular Motion AP
Uniform Circular Motion AP Uniform circular motion is motion in a circle at the same speed Speed is constant, velocity direction changes the speed of an object moving in a circle is given by v circumference
More informationK/U /39 T/I /50 C /102 A
Name: Partner: K/U /39 T/I /50 C /102 A Purpose: What is the relationship between the magnitude of the force causing the acceleration and the frequency of revolution of an object in uniform circular motion?
More information2. To study circular motion, two students use the hand-held device shown above, which consists of a rod on which a spring scale is attached.
1. A ball of mass M attached to a string of length L moves in a circle in a vertical plane as shown above. At the top of the circular path, the tension in the string is twice the weight of the ball. At
More informationW13D1-1 Reading Quiz and Concept Questions
MASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Physics Physics 8.01 Fall Term 2009 W13D1-1 Reading Quiz and Concept Questions A person spins a tennis ball on a string in a horizontal circle (so that
More informationCircular Motion and Gravitation Practice Test Provincial Questions
Circular Motion and Gravitation Practice Test Provincial Questions 1. A 1 200 kg car is traveling at 25 m s on a horizontal surface in a circular path of radius 85 m. What is the net force acting on this
More informationCircular Motion.
1 Circular Motion www.njctl.org 2 Topics of Uniform Circular Motion (UCM) Kinematics of UCM Click on the topic to go to that section Period, Frequency, and Rotational Velocity Dynamics of UCM Vertical
More informationCh 7 Homework. (a) Label physical quantities in this problem using letters you choose.
Ch 7 Homework Name: Homework problems are from the Serway & Vuille 10 th edition. Follow the instructions and show your work clearly. 1. (Problem 7) A machine part rotates at an angular speed of 0.06 rad/s;
More informationUniform Circular Motion
Slide 1 / 112 Uniform Circular Motion 2009 by Goodman & Zavorotniy Slide 2 / 112 Topics of Uniform Circular Motion (UCM) Kinematics of UCM Click on the topic to go to that section Period, Frequency, and
More informationPhysics 110 Third Hour Exam
Physics 110 Third Hour Exam Name: Answer Key Part I Short answers: Answer all questions with only one response in the margin.(3 pts each for a total of 30 pts). Note: for partial credit write a clear phrase
More informationUnit 8 Notetaking Guide Torque and Rotational Motion
Unit 8 Notetaking Guide Torque and Rotational Motion Rotational Motion Until now, we have been concerned mainly with translational motion. We discussed the kinematics and dynamics of translational motion
More informationDynamics Plane kinematics of rigid bodies Section 4: TJW Rotation: Example 1
Section 4: TJW Rotation: Example 1 The pinion A of the hoist motor drives gear B, which is attached to the hoisting drum. The load L is lifted from its rest position and acquires an upward velocity of
More information1 Problems 1-3 A disc rotates about an axis through its center according to the relation θ (t) = t 4 /4 2t
Slide 1 / 30 1 Problems 1-3 disc rotates about an axis through its center according to the relation θ (t) = t 4 /4 2t etermine the angular velocity of the disc at t= 2 s 2 rad/s 4 rad/s 6 rad/s 8 rad/s
More informationSlide 1 / 30. Slide 2 / 30. Slide 3 / m/s -1 m/s
1 Problems 1-3 disc rotates about an axis through its center according to the relation θ (t) = t 4 /4 2t Slide 1 / 30 etermine the angular velocity of the disc at t= 2 s 2 rad/s 4 rad/s 6 rad/s 8 rad/s
More informationTextbook Reference: Wilson, Buffa, Lou: Chapter 8 Glencoe Physics: Chapter 8
AP Physics Rotational Motion Introduction: Which moves with greater speed on a merry-go-round - a horse near the center or one near the outside? Your answer probably depends on whether you are considering
More informationB) v `2. C) `2v. D) 2v. E) 4v. A) 2p 25. B) p C) 2p. D) 4p. E) 4p 2 25
1. 3. A ball attached to a string is whirled around a horizontal circle of radius r with a tangential velocity v. If the radius is changed to 2r and the magnitude of the centripetal force is doubled the
More informationPage kg kg kg kg (Total 1 mark) Q4. The diagram shows two positions, X and Y, o the Ea th s su fa e.
Q1. body moves with simple harmonic motion of amplitude and frequency What is the magnitude of the acceleration when the body is at maximum displacement? zero 4π 2 b 2 b 2 PhysicsndMathsTutor.com Page
More informationPhysics 2211 ABC Quiz #3 Solutions Spring 2017
Physics 2211 ABC Quiz #3 Solutions Spring 2017 I. (16 points) A block of mass m b is suspended vertically on a ideal cord that then passes through a frictionless hole and is attached to a sphere of mass
More informationCONTENTS FIGURES. iii 1
A CENTRIFUGE PRIMER CONTENTS Preface The Centrifuge Operating Principles Calculating Centrifugal Fields Separation by Sedimentation Density Separations Duplicating Centrifuge Run Conditions Rotors and
More informationHonors Physics Review
Honors Physics Review Work, Power, & Energy (Chapter 5) o Free Body [Force] Diagrams Energy Work Kinetic energy Gravitational Potential Energy (using g = 9.81 m/s 2 ) Elastic Potential Energy Hooke s Law
More informationPhysics. Chapter 8 Rotational Motion
Physics Chapter 8 Rotational Motion Circular Motion Tangential Speed The linear speed of something moving along a circular path. Symbol is the usual v and units are m/s Rotational Speed Number of revolutions
More informationSimple Harmonic Oscillator Challenge Problems
Simple Harmonic Oscillator Challenge Problems Problem 1: Dimensional Analysis, Estimation and Concepts Imagine that one drilled a hole with smooth sides straight through the center of the earth, of radius
More informationChapter 4 Circular Motion and Gravitation Planetary Data Homework # 26
Planetary Data Homework # 26 PLANETARY DATA Mean Distance Mass from Sun Radius Period Planet (kg) (m) (m) (days) Sun 1.99 x 10 30 6.970 x 10 8 Mercury 3.30 x 10 23 5.791 x 10 10 2.439 x 10 6 87.97 Venus
More informationHATZIC SECONDARY SCHOOL
HATZIC SECONDARY SCHOOL PROVINCIAL EXAMINATION ASSIGNMENT CIRCULAR MOTION MULTIPLE CHOICE / 30 OPEN ENDED / 65 TOTAL / 95 NAME: 1. An object travels along a path at constant speed. There is a constant
More informationChapter 5 Circular Motion; Gravitation
Chapter 5 Circular Motion; Gravitation Units of Chapter 5 Kinematics of Uniform Circular Motion Dynamics of Uniform Circular Motion Highway Curves, Banked and Unbanked Nonuniform Circular Motion Centrifugation
More informationPhysics 101: Lecture 08 Centripetal Acceleration and Circular Motion
Physics 101: Lecture 08 Centripetal Acceleration and Circular Motion http://www.youtube.com/watch?v=zyf5wsmxrai Today s lecture will cover Chapter 5 Physics 101: Lecture 8, Pg 1 Circular Motion Act B A
More informationSAPTARSHI CLASSES PVT. LTD.
SAPTARSHI CLASSES PVT. LTD. NEET/JEE Date : 13/05/2017 TEST ID: 120517 Time : 02:00:00 Hrs. PHYSICS, Chem Marks : 360 Phy : Circular Motion, Gravitation, Che : Halogen Derivatives Of Alkanes Single Correct
More informationExam 3 PREP Chapters 6, 7, 8
PHY241 - General Physics I Dr. Carlson, Fall 2013 Prep Exam 3 PREP Chapters 6, 7, 8 Name TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false. 1) Astronauts in orbiting satellites
More informationChapter 6 Review Answer Key
Chapter 6 Review Answer Key Understanding Vocabulary 1. displacement 2. trajectory 3. projectile 4. parabola 5. range 6. revolves 7. rotates 8. angular speed 9. centripetal force 10. law of universal gravitation
More informationChapter 9-10 Test Review
Chapter 9-10 Test Review Chapter Summary 9.2. The Second Condition for Equilibrium Explain torque and the factors on which it depends. Describe the role of torque in rotational mechanics. 10.1. Angular
More informationThe principle of the flywheel is found before the many centuries ago in spindle and the potter's wheel.
TOM Fly Wheel Mechanical Engineering Department The principle of the flywheel is found before the many centuries ago in spindle and the potter's wheel. A heavy-rimmed rotating wheel used to minimize variations
More informationDYNAMICS ME HOMEWORK PROBLEM SETS
DYNAMICS ME 34010 HOMEWORK PROBLEM SETS Mahmoud M. Safadi 1, M.B. Rubin 2 1 safadi@technion.ac.il, 2 mbrubin@technion.ac.il Faculty of Mechanical Engineering Technion Israel Institute of Technology Spring
More informationName Date Period PROBLEM SET: ROTATIONAL DYNAMICS
Accelerated Physics Rotational Dynamics Problem Set Page 1 of 5 Name Date Period PROBLEM SET: ROTATIONAL DYNAMICS Directions: Show all work on a separate piece of paper. Box your final answer. Don t forget
More informationEQUATIONS OF MOTION: ROTATION ABOUT A FIXED AXIS (Section 17.4) Today s Objectives: Students will be able to analyze the planar kinetics of a rigid
EQUATIONS OF MOTION: ROTATION ABOUT A FIXED AXIS (Section 17.4) Today s Objectives: Students will be able to analyze the planar kinetics of a rigid body undergoing rotational motion. APPLICATIONS The crank
More informationBig Idea 4: Interactions between systems can result in changes in those systems. Essential Knowledge 4.D.1: Torque, angular velocity, angular
Unit 7: Rotational Motion (angular kinematics, dynamics, momentum & energy) Name: Big Idea 3: The interactions of an object with other objects can be described by forces. Essential Knowledge 3.F.1: Only
More informationExperiment #7 Centripetal Force Pre-lab Questions Hints
Experiment #7 Centripetal Force Pre-lab Questions Hints The following are some hints for this pre-lab, since a few of these questions can be a little difficult. Note that these are not necessarily the
More informationTute M4 : ROTATIONAL MOTION 1
Tute M4 : ROTATIONAL MOTION 1 The equations dealing with rotational motion are identical to those of linear motion in their mathematical form. To convert equations for linear motion to those for rotational
More informationAssignment - Periodic Motion. Reading: Giancoli, Chapter 5 Holt, Chapter 7. Objectives/HW:
Assignment - Periodic Motion Reading: Giancoli, Chapter 5 Holt, Chapter 7 Objectives/HW: The student will be able to: 1 Define and calculate period and frequency. 2 Apply the concepts of position, distance,
More informationChapter 6 Motion in Two Dimensions
Conceptual Physics/ PEP Name: Date: Chapter 6 Motion in Two Dimensions Section Review 6.1 1. What is the word for the horizontal distance a projectile travels? 2. What does it mean to say a projectile
More informationPSI AP Physics B Circular Motion
PSI AP Physics B Circular Motion Multiple Choice 1. A ball is fastened to a string and is swung in a vertical circle. When the ball is at the highest point of the circle its velocity and acceleration directions
More informationPhysicsAndMathsTutor.com 1
PhysicsAndMathsTutor.com 1 Q1. A grinding wheel is used to sharpen chisels in a school workshop. A chisel is forced against the edge of the grinding wheel so that the tangential force on the wheel is a
More informationPC1141 Physics I Circular Motion
PC1141 Physics I Circular Motion 1 Purpose Demonstration the dependence of the period in circular motion on the centripetal force Demonstration the dependence of the period in circular motion on the radius
More informationCircular Motion Dynamics
Circular Motion Dynamics 8.01 W04D2 Today s Reading Assignment: MIT 8.01 Course Notes Chapter 9 Circular Motion Dynamics Sections 9.1-9.2 Announcements Problem Set 3 due Week 5 Tuesday at 9 pm in box outside
More informationAns: (c) [1988] Ans: (b) Q8. (a) zero (b) A (c) zero vector (d) unit vector Ans: (c) (c) 1: 3. (d) 3:1 Ans: (b) Q11.
Motion in a Plane Q1. π/2 cos 1 0.6 tan 1 7/5 π/4 Q2. [1988] MockTime.com Q6. An electric fan has blades of length 30 cm measured from the axis of rotation. If the fan is rotating at 120 rpm, the acceleration
More informationTOPIC : 8 : Balancing
TOPIC : 8 : Balancing --------------------------------------------------------------- Q.1. What is balancing? What are its objectives? What are types of balancing? BALANCING: Balancing is the technique
More informationPHYS 1007
Core Concepts: Finding and Manipulating Equations Centripetal Force Angular Velocity Energy Work Opener: Equation Review Kahoot! Time 10 minutes Go to www.kahoot.it and enter the code on the screen to
More information3 UCM & Gravity Student Physics Regents Date
Student Physics Regents Date 1. Which diagram best represents the gravitational forces, Fg, between a satellite, S, and Earth? A) B) 4. Gravitational force exists between point objects and separated by
More informationHolt Physics Chapter 7. Rotational Motion
Holt Physics Chapter 7 Rotational Motion Measuring Rotational Motion Spinning objects have rotational motion Axis of rotation is the line about which rotation occurs A point that moves around an axis undergoes
More informationQuest Chapter 09. Eliminate the obviously wrong answers. Consider what is changing: speed, velocity, some part of velocity? Choose carefully.
1 A dragster maintains a speedometer reading of 100 km/h and passes through a curve with a constant radius. Which statement is true? 1. The dragster rounded the curve at a changing speed of 100 km/h. 2.
More informationLevel 3 Physics, 2011
90521 905210 3SUPERVISOR S Level 3 Physics, 2011 90521 Demonstrate understanding of mechanical systems 9.30 am riday Friday 2 25 November 2011 Credits: Six Check that the National Student Number (NSN)
More informationdt 2 For an object travelling in a circular path: State that angular velocity (ω) is the rate of change of angular displacement (θ).
For an object travelling in a circular path: State that angular velocity (ω) is the rate of change of angular displacement (θ). ω = dθ dt State that angular acceleration (α) is the rate of change of angular
More informationChapter 8: Rotational Motion
Lecture Outline Chapter 8: Rotational Motion This lecture will help you understand: Circular Motion Rotational Inertia Torque Center of Mass and Center of Gravity Centripetal Force Centrifugal Force Rotating
More informationName: Laboratory Investigation
Laboratory Investigation Abstract: Analysis of the circular motion of a swinging stopper will provide insight into the causes of centripetal force and develop relationships between speed, radius and centripetal
More informationUCM-Circular Motion. Base your answers to questions 1 and 2 on the information and diagram below.
Base your answers to questions 1 and 2 on the information and diagram The diagram shows the top view of a 65-kilogram student at point A on an amusement park ride. The ride spins the student in a horizontal
More informationFORCE AND MOTION CHAPTER 3
FORCE AND MOTION CHAPTER 3 Review: Important Equations Chapter 2 Definitions Average speed: Acceleration: v = d t v = Δd a = Δv Δt = v v 0 t t 0 Δt = d d 0 t t 0 Derived Final velocity: Distance fallen:
More informationCircular Motion Tangential Speed. Conceptual Physics 11 th Edition. Circular Motion Rotational Speed. Circular Motion
Conceptual Physics 11 th Edition Circular Motion Tangential Speed The distance traveled by a point on the rotating object divided by the time taken to travel that distance is called its tangential speed
More informationAn object moving in a circle with radius at speed is said to be undergoing.
Circular Motion Study Guide North Allegheny High School Mr. Neff An object moving in a circle with radius at speed is said to be undergoing. In this case, the object is because it is constantly changing
More informationCircular Motion Test Review
Circular Motion Test Review Name: Date: 1) Is it possible for an object moving with a constant speed to accelerate? Explain. A) No, if the speed is constant then the acceleration is equal to zero. B) No,
More informationPHY 111L Activity 9 Moments of Inertia
PHY 111L Activity 9 Moments of Inertia Name: Section: ID #: Date: Lab Partners: TA initials: Objectives 1. Introduce moment of inertia for different objects 2. Understand the moment of inertia apparatus
More informationLab 5: Rotational motion at the playground Essentials of Physics: PHYS 101
NAME DATE Lab 5: Rotational motion at the playground Essentials of Physics: PHYS 101 Important note: this lab meets at the playground located at the SW corner of 23 rd and University streets, about 7 blocks
More informationAngular Speed and Angular Acceleration Relations between Angular and Linear Quantities
Angular Speed and Angular Acceleration Relations between Angular and Linear Quantities 1. The tires on a new compact car have a diameter of 2.0 ft and are warranted for 60 000 miles. (a) Determine the
More informationUpon collision, the clay and steel block stick together and move to the right with a speed of
1. A 2.0-kilogram ball traveling north at 4.0 meters per second collides head on with a 1.0-kilogram ball traveling south at 8.0 meters per second. What is the magnitude of the total momentum of the two
More informationPhysics A - PHY 2048C
Physics A - PHY 2048C Newton s Laws & Equations of 09/27/2017 My Office Hours: Thursday 2:00-3:00 PM 212 Keen Building Warm-up Questions 1 In uniform circular motion (constant speed), what is the direction
More informationASTRONAUT PUSHES SPACECRAFT
ASTRONAUT PUSHES SPACECRAFT F = 40 N m a = 80 kg m s = 15000 kg a s = F/m s = 40N/15000 kg = 0.0027 m/s 2 a a = -F/m a = -40N/80kg = -0.5 m/s 2 If t push = 0.5 s, then v s = a s t push =.0014 m/s, and
More informationLecture 3. Rotational motion and Oscillation 06 September 2018
Lecture 3. Rotational motion and Oscillation 06 September 2018 Wannapong Triampo, Ph.D. Angular Position, Velocity and Acceleration: Life Science applications Recall last t ime. Rigid Body - An object
More information