Transactions on Modelling and Simulation vol 3, 1993 WIT Press, ISSN X
|
|
- Jack Grant
- 6 years ago
- Views:
Transcription
1 Boundary element method in the development of vehicle body structures for better interior acoustics S. Kopuz, Y.S. Unliisoy, M. Qali kan Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey ABSTRACT In this paper, Boundary Element Method (BEM) is exploited for the numerical solution of interior acoustics problems governed by the Helmholtz's equation. A detailed literature survey on the application of the BEM to the radiation problems concerning the interior regions is presented. A formulation directed to the particular application of noise generation inside motor vehicle passenger compartments is developed. The solution of the problem is illustrated, in detail, on a classical acoustic problem, i.e. the acoustic response of a spherical cavity. The sound pressure variation along the radius is examined as a function of the dimensionless frequency number. The effect of an opening on the surface of the body is also examined. INTRODUCTION The prediction of the acoustic field due to arbitrarily shaped structures is an important research area in many disciplines. There are two main broad areas of radiation problems; namely exterior and interior acoustic radiation. This topic has a variety of applications, in particular in the aerospace engineering and automotive engineering fields in determining the interior noise levels of aircraft and ground vehicles. For these applications several different methods have been used, the finite element method, statistical energy analysis, and boundary element method (BEM) with integral formulations being the most prominent. Each method has its advantages and drawbacks depending on the particular frequency range of interest. In this paper, a formulation directed to the prediction of noise generation inside motor vehicle passenger compartments is introduced and a study of the boundary element method for the solution of the interior acoustics problems governed by the Helmholtz's equation is presented. The ultimate aim of the study is to produce a computational tool to be used in the prediction of the
2 58 Boundary Element Technology acoustical field inside a vehicle structure for which the vibration characteristics are available. The solution of the problem is illustrated on a classical acoustic problem, i.e. the acoustic response of a spherical cavity. The acoustic pressure variation along the radius is predicted as a function of the Helmholtz number. The effect of an opening on the surface of the vibrating body is also investigated. SURVEY OF PREVIOUS WORK The solution of the interior noise fields of cavities having arbitrary shapes by using the BEM has recently received much interest. Bell, Meyer, and Zinn [1] presented an integral solution of the Helmholtz equation for predicting acoustic properties of arbitrarily shaped bodies. They examined twodimensional problems of a circle and rectangle together with a duct having a right-angle bend. They also investigated the acoustic properties of a sphere using an axisymmetric formulation. Sestieri et al [2] discussed the structuralacoustic coupling problem by using the BEM for interior volumes having complex shapes. They investigated the importance of coupling and reached the conclusion that a fully coupled analysis did not seem to be justified. Seybert and Cheng [3] dealt with the application of the BEM to interior acoustics problems governed by the reduced wave (Helmholtz) differential equation. They applied the BEM formulation to an axisymmetric problem at which surface integrals could be reduced to line integrals along the generator of the cavity and to integrals over the angle of revolution. Therefore, the surface was discretized by using line elements, not surface elements and only the generator of the cavity needed to be discretized. They examined the acoustic response of a spherical cavity. In predicting the acoustical behavior of cavities, a different method was employed by Kipp and Bernhard [4]. They developed an Indirect Boundary Element Method (IBEM) which was basically derived by Chen and Schweikert [5]. In this method, a source density distribution is considered to exist at the boundary of the cavity and this boundary source distribution is determined by satisfying the boundary conditions. However, in the direct boundary element method, variables, namely, acoustic pressures and velocities are solved directly. The capability to include acoustic point sources within the cavity was also implemented in the study. The method was applied to the prediction of sound fields in spherical and rectangular cavities. All three types of boundary conditions, namely, pressure, velocity and impedance boundary conditions were verified. Fyfe [6] discussed the application of the BEM to predict the interior acoustic mode frequencies of an enclosed medium. He used a non-rectangular box and an automobile model to show the accuracy of the method. Cheng and
3 Boundary Element Technology 59 Seybert [7] examined both the interior and exterior acoustic radiation problems considering the application of the BEM. The acoustic response of a spherical cavity was determined and good agreement between the BEM results and the analytical solution was obtained. Wu et al [8] described a general boundary element code called BEMAP for acoustic analysis, along with the process of vectorizing and parallelizing the code on a vector parallel computer. Seybert, Cheng and Wu [9] presented an approach to the solution of coupled interior/exterior problems using the BEM. Recently, Seybert, Wu and Wan [10] rewieved the applications of boundary element modeling in acoustics. A general investigation of the application of the BEM for the numerical solution of noise problems inside a complex shaped cavity was performed by Suzuki et al [11]. A new formulation for complicated boundary conditions was proposed to solve practical noise problems inside a vehicle cabin. The effect of absorbent materials on the vibrating surfaces and the effect of leakage through an opening were considered in the analysis. They applied the method in determining the sound pressure inside a linear duct, and the transmission of sound through a cavity-backed plate, and in predicting the sound pressure field inside a rather simple sedan compartment model. These studies resulted in the development of a new computer code called ACOUST/BOOM to analyze the sound pressure radiated by a vibrating structure and to calculate the acoustical characteristics of the enclosed field [12]. Utsuno et al [13] studied a method for the analysis of the sound field in a full-size model of an automobile cabin. The acoustic resonant frequencies and the acoustic modes of the cabin were calculated by using the BEM. The results were then compared with an experiment conducted on a full-size cabin model made of plaster. The calculated modes and frequency response curves were found to be in good agreement with the experiments. FORMULATION The geometry of the problem is presented in Figure 1. An ideal, homogeneous, frictionless fluid fills an interior volume V of the cavity surrounded by a surface S. A generalfieldpoint is denoted by A, and a surface point by B. The positive unit normal n is directed from the point on S as shown in the figure. The problems to be considered are those dealing with acoustical behavior within cavities due to a vibrating source. For most practical problems a sinusoidal time dependence can be assumed so that the problem is simplified greatly. Then, the wave equation reduces to the well known Helmholtz equation : V^p+k^p-O, k = co/c (1)
4 60 Boundary Element Technology where p is the acoustic pressure, k is the wave number, 0) is the angular frequency, and c is the speed of sound in the medium. Figure 1. Geometry of the Physical Problem Solution of the Helmholtz equation can be obtained by seperation of variables [14]. This method involves the series expansions of the solutions in terms of the normal modes of the system and can only be used with special coordinate systems and boundary conditions. For arbitrarily shaped bodies, analytical solutions can only be obtained by numerical methods. Applying the Green's theorem together with the definition of Green's Function to the Helmholtz equation with the suitable boundary condition, one can obtain the following integral equation c(a)p(a)-lp(b) 1 r(a,b) jk coscc(a,b),-jkr(a,b) r(a,b) ds(b) v(b).-jkr(a.b) r(a,b) ds(b) (2) where z is the specific acoustic impedance, v is the surface velocity, r is the distance between the points A and B, <xis the angle between the unit normal and position vector r, and 47C for field points inside the body c(a) = { 271 forfieldpoints on the surface of the body 0 forfieldpoints outside the body
5 NUMERICAL SOLUTION TECHNIQUE Boundary Element Technology 61 In the previous section, the integral equation which describes the interior acoustic field of an arbitrarily shaped body is given.the numerical procedure for the BEM solution has been explained in detail in [3,7,11] and consists of the four main steps given below : 1.Discretization of the boundary surface into boundary elements. 2.Numerical integration to get an algebraic system of equations. 3.Solution of the system of equations to obtain the unknown boundary surface variables. 4. Solution of the field (interior) values. The two-dimensional surface of the body is discretized in the BEM rather than the three-dimensional field inside the body as in the Finite Element Method (FEM). Thus, the dimension of the problem is reduced by one. Another advantage of the BEM over the other domain methods is that the input data required needs less preparation effort when compared to the FEM. In order to represent both the geometry of the body and variation of the acoustic variables within each element, the quadratic isoparametric elements having six or eight nodes are used in this study. Variation of these variables can be represented as : 6-8 Xi(,T )= ZNj(^,n)Xi,, i=l,...,number of elements (3).1=1 where Nj are the second-order shape functions of the local coordinates (,T ). The discretized equations result in a matrix form as [A](X)={B) (4) where [A] is a square coefficient matrix,{b} is a right hand side vector and {X} is the unknown vector which contains the nodal pressures. APPLICATION OF BEM TO ACOUSTIC RESPONSE OF A SPHERICAL CAVITY The BEM is used to determine the acoustic response of a spherical cavity.the analytical solution for the acoustic pressure inside a spherical cavity is given as (5)
6 62 Boundary Element Technology where K is a constant to be determined by the boundary conditions at the surface (r=a) of the sphere. If the surface of the spherical cavity of radius a pulsates radially with a uniform velocity (i.e. v=l at r=a), the solution takes the following form p(r)=j (6) sin(ka)-kacos(ka)l kr J The acoustic pressure distribution along the radius of the spherical cavity is only function of ka (dimensionless frequency). Then the magnitude of the acoustic pressure at the inner wall of the spherical cavity p(r=.) = sin(ka)- kacos(ka) and the magnitude of the acoustic pressure at the half radius (r=a/2) of the spherical cavity p(r =./2) = 2kazsin(ka/2) (8) sin(ka)- kacos(ka) and the magnitude of the acoustic pressure at the center of the spherical cavity U_2 p(r = 0)1 = - - (9) sin(ka)-kacos(ka) The magnitude of the acoustic pressure at the inner wall, at the half radius, and at the center of the spherical cavity pulsating with a uniform surface velocity of v = 1 m/s are obtained from both the analytical solution and the BEM. For the BEM solution, the sphere is discretized into 16 quadrilateral quadratic isoparametric elements each having 8 nodes. The total number of nodes is 50. The computer code is developed on both the IBM 3090 mainframe using the FORTRAN 77 compiler and on a (33 MHz) personal computer using the LAHEY compiler. The ESSL and IMSL subroutines are used in the solution of the complex set of simultaneous equations. The results obtained are displayed in Figures 2, 3, and 4. The BEM results agree quite well with the analytical solutions as can be seen from the given figures. Figure 4 represents the acoustic pressure distribution at the center of the spherical cavity as a function of ka. The magnitude of the pressure is in good agreement with the analytical result. The point where the pressure magnitude goes to infinity corresponds to the acoustical resonance of the spherical cavity under the Neumann boundary
7 Boundary Element Technology 63 condition and is found from the solution of tan(ka) = ka. Note that this point is predicted accurately. The BEM code is also verified [15,16] on the solution of a classical exterior acoustic radiation problem, i.e. the sound pressure on the surface of a uniformly pulsating sphere. The results obtained were in good agreement with the theoretical results. 10 cd 8 BEM 2 * "o, 4 2 \ \ Analytical *^* ^ ^ ^ m *_^^ *-. 0 ^ () I ka Figure 2. Magnitude of p / zka at the inner wall of a pulsating spherical cavity 10 1 \ 8 CO V BEM j 5 * % 4 \ Analytical 2 \ /-< "*- # A A A * m- # 0 () ^5 ka Figure 3. Magnitude of p / zka at the half radius of a pulsating spherical cavity To see the effect of the opening on the acoustic pressure, a part of the surface of the spherical cavity is considered to have an impedance (mixed) boundary condition. The opening on the surface of the spherical cavity is 1/16 of the total surface. The pressure variation at the center of the spherical cavity is
8 64 Boundary Element Technology displayed in Figure 5. As one notes, the pressure magnitudes drop down in case of an opening for ka less than 2. The assumed impedance relation holds for small frequencies where acoustic pressure and particle velocity are uniform over the opening. Additional resonance of the cavity caused by the opening is also observed from the figure at ka= BEM CO \ Analytical 3 * \ Z 4 /' K \\ 2 /*»- _*. * * -# _, # -#'* _*_ *-tr-*' 0 C) ka Figure 4. Magnitude of p / zka at the center of a pulsating spherical cavity *. * \. ' '. \\\# 30 CQ ~~~ "N 20 # CL ~" 10 _ 0 C) 0.5 #». ' i No opening Opening ka 2 Figure 5. BEM results at the center of a spherical cavity. CONCLUSION In this paper thefirststage of a research programme directed towards the prediction of sound pressure levels inside vehicle structures, under realistic operating conditions, is introduced. A literature survey on the application of the BEM to the radiation problems concerning the interior regions is presented. The
9 Boundary Element Technology 65 BEM formulation has been given for the interior acoustic radiation problems together with the numerical solution technique and illustrated on a classical acoustic problem. The application of the BEM to the numerical solution of the acoustic response of a spherical cavity has been performed. The acoustic pressure distribution along the radius of the spherical cavity is found from the applied numerical method and then compared with the analytical results. The results obtained from the BEM agree quite well with the analytical results. Finally, the effect of an opening on the acoustic pressure at the center of the sphere has been investigated. As a next step in this ongoing research, the experimental verifications will be performed. A non symmetric box structure will used in the experiments and the vibration data from this box will be obtained. The obtained vibration data will be used as boundary condition for the BEM code developed. Finally, the sound pressure levels obtained from the experiments and the BEM will be compared. If the results are satisfactory the method will be applied to a vehicle body structure whose vibration characteristics will be measured and/or calculated using a FEM model. ACKNOWLEDGEMENTS Middle East Technical University Research Fund Project No is gratefully acknowledged for the support and the computational facilities provided. REFERENCES 1. Bell, W.A., Meyer, W.L., and Zinn, B.T., "Predicting the Acoustics of Arbitrarily Shaped Bodies Using an Integral Approach", AIAA Journal, 1977, Vol. 15, No. 6, pp Sestieri, A., Vescovo, D.D., and Lucibello, P., "Structural-Acoustic Coupling in Complex Shaped Cavities", J.Sound and Vibration, Vol. 96, No. 2, 1984, pp Seybert, A.F., and Cheng, C.Y.R., " Application of the Boundary Element Method to Acoustic Cavity Response and Muffler Analysis",.J.Vib. Ac. St. Rel. Des, Vol. 109, 1987, pp Kipp, C.R., and Bernhard, R.J., "Prediction of Acoustical behavior in Cavities Using an Indirect Boundary Element Method",.J.Vib. Ac. St. Rel. Des., Vol. 109, 1987, pp Chen, L.H. and Schweikert, D.G., "Sound Radiation from an Arbitrary Body", J.Acoust. Soc. Am., Vol. 35, No. 10, 1963, pp Fyfe, K.R., "Determination of Acoustic Modal Properties from Boundary Element Modelling", Dynamic Engng., 1988, Heverlee, Belgium.
10 66 Boundary Element Technology 7. Cheng, C.Y.R, and Seybert, A.F., " Recent Applications of the Boundary Element Method to Problems in Acoustics", SAE Paper No , 1988, pp Wu, T.W., et. al, "Vectorization and Parallelization of the Acoustic Boundary Element Code BEMAP on the IBM ES / 3090 VF", International Congress on Recent Developments in Air-and Structure-Borne Sound and Vibration, 1990, Auburn University, USA. 9. Seybert, A.F., Cheng, C.Y.R., and Wu, T.W., "The Solution of Coupled Interior / Exterior Acoustic Problems Using The Boundary Element Method", J.Acoust. Soc. Am., Vol. 88, No. 3, 1990, pp Seybert, A.F., Wu, T W, and Wan, G.C., "Recent Applications of Boundary Element Modelling in Acoustics", Second International Congress on Recent Developments in Air-and Structure-Borne Sound and Vibration, 1992, Auburn University, USA. 11.Suzuki, S., Maruyama, S., and Ido, H, "Boundary Element Analysis of Cavity Noise Problems with Complicated Boundary Conditions", J.Sound and Vibration, Vol. 130, No. 1, 1989, pp shiyama, et. al., "The Applications of ACOUST / BOOM - A Noise Level Predicting and Reducing Computer Code", SAE Paper No , 1989, pp Utsuno, et. al., "Analysis of the Sound Field in an Automobile Cabin by Using the Boundary Element Method", SAE Paper No , 1990, pp Morse, P.M. and Feshbach, H, "Methods of Theoretical Physics",Mc-Graw Hill Book Company, Kopuz, S., Unlusoy, Y.S., and Caliskan, M, "Formulation of the interior acoustic fields for passenger vehicle compartments", Proceedings of the Second International Congress on Recent Developments in Air-and Structure-Borne Sound and Vibration, pp , Auburn University, Auburn, USA, Kopuz, S., Unlusoy, Y.S., and Caliskan, M, "The Use of BEM in the Prediction of Interior Acoustics of Vehicle Body Structures", to be presented at the 6th National Conference on Machine Theory, Trabzon, Turkey, September 15-17, 1993 (in Turkish).
Structural Acoustics Applications of the BEM and the FEM
Structural Acoustics Applications of the BEM and the FEM A. F. Seybert, T. W. Wu and W. L. Li Department of Mechanical Engineering, University of Kentucky Lexington, KY 40506-0046 U.S.A. SUMMARY In this
More informationIMPROVING THE ACOUSTIC PERFORMANCE OF EXPANSION CHAMBERS BY USING MICROPERFORATED PANEL ABSORBERS
Proceedings of COBEM 007 Copyright 007 by ABCM 9th International Congress of Mechanical Engineering November 5-9, 007, Brasília, DF IMPROVING THE ACOUSTIC PERFORMANCE OF EXPANSION CHAMBERS BY USING MICROPERFORATED
More informationTransmission Loss Assessment for a Muffler by Boundary Element Method Approach
ANALELE UNIVERSITĂłII EFTIMIE MURGU REŞIłA ANUL XVII, NR. 1, 010, ISSN 1453-7397 Ovidiu Vasile Transmission Loss Assessment for a Muffler by Boundary Element Method Approach This paper investigates the
More informationMuffler Transmission Loss Simple Expansion Chamber
Muffler Transmission Loss Simple Expansion Chamber 1 Introduction The main objectives of this Demo Model are Demonstrate the ability of Coustyx to model a muffler using Indirect model and solve the acoustics
More informationNew Developments of Frequency Domain Acoustic Methods in LS-DYNA
11 th International LS-DYNA Users Conference Simulation (2) New Developments of Frequency Domain Acoustic Methods in LS-DYNA Yun Huang 1, Mhamed Souli 2, Rongfeng Liu 3 1 Livermore Software Technology
More informationFastBEM Acoustics. Verification Manual , Advanced CAE Research, LLC (ACR) Cincinnati, Ohio, USA All Rights Reserved
FastBEM Acoustics Verification Manual 2007-2017, Advanced CAE Research, LLC (ACR) Cincinnati, Ohio, USA All Rights Reserved www.fastbem.com Copyright 2007-2017, Advanced CAE Research, LLC, All Rights Reserved
More informationAcoustic performance of industrial mufflers with CAE modeling and simulation
csnak, 214 Int. J. Nav. Archit. Ocean Eng. (214) 6:935~946 http://dx.doi.org/1.2478/ijnaoe-213-223 pissn: 292-6782, eissn: 292-679 Acoustic performance of industrial mufflers with CAE modeling and simulation
More informationSimulation of acoustic and vibroacoustic problems in LS-DYNA using boundary element method ABSTRACT:
Simulation of acoustic and vibroacoustic problems in LS-DYNA using boundary element method Yun Hang, Mhamed Souli, Rogelio Perez Livermore Software Technology Corporation USA & University of Lille Laboratoire
More informationPREDICTION OF ACOUSTIC NATURAL FREQUENCIES FOR TWO DIMENSIONAL SIMPLIFIED AIRCRAFT CABIN BY IMPEDANCE MOBILITY COMPACT MATRIX (IMCM) APPROACH
PREDICION OF ACOUSIC NAURAL FREQUENCIES FOR WO DIMENSIONAL SIMPLIFIED AIRCRAF CABIN BY IMPEDANCE MOBILIY COMPAC MARIX (IMCM) APPROACH Veerabhadra REDDY 1 ; Venkatesham B 2 1 Department of Mechanical and
More informationTransactions on Modelling and Simulation vol 12, 1996 WIT Press, ISSN X
Field reconstruction by acoustic holography technique based on BEM Y.A. He, Z.Y. He Acoustic Engineering Institute, Harbin Engineering University, Harbin, Heilongjiang 150001, China Abstract This paper
More information1817. Research of sound absorption characteristics for the periodically porous structure and its application in automobile
1817. Research of sound absorption characteristics for the periodically porous structure and its application in automobile Xian-lin Ren School of Mechatronics Engineering, University of Electronic Science
More informationBEM Methods for Acoustic and Vibroacoustic Problems in LS-DYNA
12 th International LS-DYNA Users Conference Simulation(2) BEM Methods for Acoustic and Vibroacoustic Problems in LS-DYNA Mhamed Souli, Yun Huang, Rongfeng Liu Livermore Software Technology Corporation
More informationImproved Method of the Four-Pole Parameters for Calculating Transmission Loss on Acoustics Silence
7659, England, UK Journal of Information and Computing Science Vol., No., 7, pp. 6-65 Improved Method of the Four-Pole Parameters for Calculating Transmission Loss on Acoustics Silence Jianliang Li +,
More informationAcoustic radiation by means of an acoustic dynamic stiffness matrix in spherical coordinates
Acoustic radiation by means of an acoustic dynamic stiffness matrix in spherical coordinates Kauê Werner and Júlio A. Cordioli. Department of Mechanical Engineering Federal University of Santa Catarina
More informationModal analysis of an enclosure acoustic space based on spectro-geometric method
INTER-NOISE 6 Modal analysis of an enclosure acoustic space based on spectro-geometric method Xianjie SHI ; Chunli LI ; Fengjun WANG 3 ; Wen L LI 4 Institute of Systems Engineering, China Academy of Engineering
More informationPrediction of High-frequency Vibro-acoustic Coupling in Anechoic Chamber Using Energy Finite Element Method and Energy Boundary Element Method
Copyright 2012 Tech Science ress CMES, vol.85, no.1, pp.65-78, 2012 rediction of High-frequency Vibro-acoustic Coupling in Anechoic Chamber Using Energy Finite Element Method and Energy Boundary Element
More informationIntroduction to Acoustics Exercises
. 361-1-3291 Introduction to Acoustics Exercises 1 Fundamentals of acoustics 1. Show the effect of temperature on acoustic pressure. Hint: use the equation of state and the equation of state at equilibrium.
More informationEngineering Noise Control
Engineering Noise Control Theory and practice Second edition David A. Bies and Colin H. Hansen Department of Mechanical Engineering University of Adelaide South Australia E & FN SPON An Imprint of Chapman
More informationThe sound power output of a monopole source in a cylindrical pipe containing area discontinuities
The sound power output of a monopole source in a cylindrical pipe containing area discontinuities Wenbo Duan, Ray Kirby To cite this version: Wenbo Duan, Ray Kirby. The sound power output of a monopole
More informationDesign of Partial Enclosures. D. W. Herrin, Ph.D., P.E. University of Kentucky Department of Mechanical Engineering
D. W. Herrin, Ph.D., P.E. Department of Mechanical Engineering Reference 1. Ver, I. L., and Beranek, L. L. (2005). Control Engineering: Principles and Applications. John Wiley and Sons. 2. Sharp, B. H.
More informationEffect of effective length of the tube on transmission loss of reactive muffler
Effect of effective length of the tube on transmission loss of reactive muffler Gabriela Cristina Cândido da SILVA 1 ; Maria Alzira de Araújo NUNES 1 1 University of Brasilia, Brazil ABSTRACT Reactive
More informationLearning Acoustics through the Boundary Element Method: An Inexpensive Graphical Interface and Associated Tutorials
Learning Acoustics through the Boundary Element Method: An Inexpensive Graphical Interface and Associated Tutorials ABSTRACT Laura A. Brooks, Rick C. Morgans, Colin H. Hansen School of Mechanical Engineering,
More informationSimulation of Acoustic and Vibro-Acoustic Problems in LS-DYNA using Boundary Element Method
10 th International LS-DYNA Users Conference Simulation Technolog (2) Simulation of Acoustic and Vibro-Acoustic Problems in LS-DYNA using Boundar Element Method Yun Huang Livermore Software Technolog Corporation
More informationThis is the author s version of a work that was submitted/accepted for publication in the following source:
This is the author s version of a work that was submitted/accepted for publication in the following source: Lin, Tian Ran & Pan, Jie (29) Sound radiation characteristics of a box-type structure. Journal
More informationComputational Modelling of Acoustic Scattering of a Sound Source in the Vicinity of the Ground
Computational Modelling of Acoustic Scattering of a Sound Source in the Vicinity of the Ground Dr. Panagiota Pantazopoulou and Prof. Dimitris Drikakis Members, IAENG Abstract The paper presents a computational
More informationSound radiation from the open end of pipes and ducts in the presence of mean flow
Sound radiation from the open end of pipes and ducts in the presence of mean flow Ray Kirby (1), Wenbo Duan (2) (1) Centre for Audio, Acoustics and Vibration, University of Technology Sydney, Sydney, Australia
More informationA study on regularization parameter choice in Near-field Acoustical Holography
Acoustics 8 Paris A study on regularization parameter choice in Near-field Acoustical Holography J. Gomes a and P.C. Hansen b a Brüel & Kjær Sound and Vibration Measurement A/S, Skodsborgvej 37, DK-285
More informationGuided convected acoustic wave coupled with a membrane wall used as noise reduction device
Buenos Aires 5 to 9 September, 016 Acoustics for the 1 st Century PROCEEDINGS of the nd International Congress on Acoustics Structural Acoustics and Vibration (others): Paper ICA016-516 Guided convected
More informationTransmission Loss of a Dissipative Muffler with Perforated Central Pipe
Transmission Loss of a Dissipative Muffler with Perforated Central Pipe 1 Introduction This example problem demonstrates Coustyx ability to model a dissipative muffler with a perforated central pipe. A
More informationSound radiation of a plate into a reverberant water tank
Sound radiation of a plate into a reverberant water tank Jie Pan School of Mechanical and Chemical Engineering, University of Western Australia, Crawley WA 6009, Australia ABSTRACT This paper presents
More informationFEM/FMBEM coupling for acoustic structure interaction and acoustic design sensitivity analysis with sound-absorbing materials
Boundary Elements and Other Mesh Reduction Methods XXXVIII 113 FEM/FMBEM coupling for acoustic structure interaction and acoustic design sensitivity analysis with sound-absorbing materials Y. M. Xu, H.
More informationNumerical Model of the Insertion Loss Promoted by the Enclosure of a Sound Source
Numerical Model of the Insertion Loss Promoted by the Enclosure of a Sound Source Gil F. Greco* 1, Bernardo H. Murta 1, Iam H. Souza 1, Tiago B. Romero 1, Paulo H. Mareze 1, Arcanjo Lenzi 2 and Júlio A.
More informationCalculation of sound radiation in infinite domain using a meshless method
PROCEEDINGS of the 22 nd International Congress on Acoustics Structural Acoustics and Vibration: Paper ICA2016-41 Calculation of sound radiation in infinite domain using a meshless method Shaowei Wu (a),
More informationEffect of Length and Porosity on the Acoustic Performance of Concentric Tube Resonators
Effect of Length and Porosity on the Acoustic Performance of Concentric Tube Resonators David Neihguk *1, and Abhinav Prasad 1 1 Mahindra Research Valley, Mahindra & Mahindra Ltd. *Corresponding author:
More informationAcoustic coupling between cascade sub-chambers and its influence on overall transmission loss
Acoustic coupling between cascade sub-chambers and its influence on overall transmission loss Yuhui Tong School of Mechanical and Chemical Engineering, The University of Western Australia, Crawley WA 6009,
More informationTHE RADIATION EFFICIENCY OF FINITE SIZE FLAT PANELS
THE RADIATION EFFICIENCY OF FINITE SIZE FLAT PANELS John L. Davy () () () Manufacturing and Infrastructure Technology, CSIRO, Melbourne, Australia () Applied Physics, RMIT University, Melbourne, Australia
More informationMETHODS OF THEORETICAL PHYSICS
METHODS OF THEORETICAL PHYSICS Philip M. Morse PROFESSOR OF PHYSICS MASSACHUSETTS INSTITUTE OF TECHNOLOGY Herman Feshbach PROFESSOR OF PHYSICS MASSACHUSETTS INSTITUTE OF TECHNOLOGY PART II: CHAPTERS 9
More informationNumerical modelling techniques to optimise automotive-type panels for reduced sound radiation
Loughborough University Institutional Repository Numerical modelling techniques to optimise automotive-type panels for reduced sound radiation This item was submitted to Loughborough University's Institutional
More informationProceedings of Meetings on Acoustics
Proceedings of Meetings on Acoustics Volume 19, 13 http://acousticalsocietyorg/ ICA 13 Montreal Montreal, Canada - 7 June 13 Architectural Acoustics Session paab: Dah-You Maa: His Contributions and Life
More informationIndirect Boundary Element Method for Calculation of Oseen s Flow Past a Circular Cylinder in the Case of Constant Variation
Indirect Boundary Element Method for Calculation of Oseen s Flow Past a Circular Cylinder in the Case of Constant Variation Ghulam Muhammad 1 and Nawazish Ali Shah 2 1 Department of Mathematics, GCS, Lahore,
More informationDESIGN OF PARTIAL ENCLOSURES FOR ACOUSTICAL APPLICATIONS
University of Kentucky UKnowledge University of Kentucky Master's Theses Graduate School 2006 DESIGN OF PARTIAL ENCLOSURES FOR ACOUSTICAL APPLICATIONS Amy Elizabeth Carter University of Kentucky, AmyCarter@engr.uky.edu
More informationA hybrid finite element approach to modelling sound radiation. from circular and rectangular ducts.
A hybrid finite element approach to modelling sound radiation from circular and rectangular ducts. Wenbo Duan School of Engineering and Design, Mechanical Engineering, Brunel University, Uxbridge, Middlesex,
More informationApplication of LS-DYNA to NVH Solutions in the Automotive Industry
14 th International LS-DYNA Users Conference Session: Simulation Application of LS-DYNA to NVH Solutions in the Automotive Industry Prasanna S. Kondapalli, Tyler Jankowiak BASF Corp., Wyandotte, MI, U.S.A
More informationNoise in enclosed spaces. Phil Joseph
Noise in enclosed spaces Phil Joseph MODES OF A CLOSED PIPE A 1 A x = 0 x = L Consider a pipe with a rigid termination at x = 0 and x = L. The particle velocity must be zero at both ends. Acoustic resonances
More informationDesign of ParaMPA: a micro-perforated absorber
Design of ParaMPA: a micro-perforated absorber Onursal Onen and Mehmet Caliskan Department of Mechanical Engineering Middle East Technical University 06531 Ankara, Turkey ABSTRACT Perforated absorbers
More informationPoint Excitation of a Coupled Structural-Acoustical Tire Model with Experimental Verification
Purdue University Purdue e-pubs Publications of the Ray W. Herrick Laboratories School of Mechanical Engineering 8-2015 Point Excitation of a Coupled Structural-Acoustical Tire Model with Experimental
More informationSound Radiation Modes of a Tire on a Reflecting Surface
Purdue e-pubs Publications of the Ray W. School of Mechanical Engineering 7-2004 Sound Radiation Modes of a Tire on a Reflecting Surface J Stuart Bolton, bolton@purdue.edu Kiho Yum Follow this and additional
More informationinter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering August 2000, Nice, FRANCE
Copyright SFA - InterNoise 2000 1 inter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering 27-30 August 2000, Nice, FRANCE I-INCE Classification: 7.0 VIBRATIONS OF FLAT
More informationHydroelastic vibration of a rectangular perforated plate with a simply supported boundary condition
Fluid Structure Interaction and Moving Boundary Problems IV 63 Hydroelastic vibration of a rectangular perforated plate with a simply supported boundary condition K.-H. Jeong, G.-M. Lee, T.-W. Kim & J.-I.
More informationNUMERICAL PREDICTION OF PERFORATED TUBE ACOUSTIC IMPEDANCE
NUMERICAL PREDICTION OF PERFORATED TUBE ACOUSTIC IMPEDANCE G. Pradeep, T. Thanigaivel Raja, D.Veerababu and B. Venkatesham Department of Mechanical and Aerospace Engineering, Indian Institute of Technology
More informationinter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering August 2000, Nice, FRANCE
Copyright SFA - InterNoise 2000 1 inter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering 27-30 August 2000, Nice, FRANCE I-INCE Classification: 1.3 MODEL ANALYSIS
More informationACOUSTIC RADIATION OF VIBRATING PLATE STRUCTURES SUBMERGED IN WATER UKASZ NOWAK, TOMASZ G. ZIELI SKI
ACOUSTIC RADIATION OF VIBRATING PLATE STRUCTURES SUBMERGED IN WATER UKASZ NOWAK, TOMASZ G. ZIELI SKI Institute of Fundamental Technological Research Polish Academy of Sciencess ul. Pawinskiego 5B, 02-106
More informationVerification of Sound Absorption Characteristics Constituted Porous Structure
Verification of Sound Absorption Characteristics Constituted Porous Structure Toru Yoshimachi 1, Ryo Ishii 1, Kuniharu Ushijima 2, Naoki Masuda 2, Takao Yamaguchi 3, Yun Huang 4, Zhe Cui 4 1 JSOL Corporation,
More informationNumerical Prediction of the Radiated Noise of Hermetic Compressors Under the Simultaneous Presence of Different Noise Sources
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 1998 Numerical Prediction of the Radiated Noise of Hermetic Compressors Under the Simultaneous
More informationTRANSMISSION LOSS OF EXTRUDED ALUMINIUM PANELS WITH ORTHOTROPIC CORES
TRANSMISSION LOSS OF EXTRUDED ALUMINIUM PANELS WITH ORTHOTROPIC CORES PACS REFERENCE: 43.40-Rj RADIATION FROM VIBRATING STRUCTURES INTO FLUID MEDIA Names of the authors: Kohrs, Torsten; Petersson, Björn
More informationVibro-Acoustic Modelling of Hermetic Reciprocating Compressors
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 1998 Vibro-Acoustic Modelling of Hermetic Reciprocating Compressors L. Gavric CETIM Follow
More informationSimplified modelling of vehicle interior noise: comparison of analytical, numerical and experimental approaches
Loughborough University Institutional Repository Simplified modelling of vehicle interior noise: comparison of analytical, numerical and experimental approaches This item was submitted to Loughborough
More informationFinn Jacobsen c) Department of Acoustic Technology, Technical University of Denmark, Ørsteds Plads, Building 352, DK-2800 Kgs.
On the modeling of narrow gaps using the standard boundary element method Vicente Cutanda a) Brüel & Kjær Sound & Vibration, Skodsborgvej 307, DK-2850 Nærum, Denmark Peter Møller Juhl b) ITF Institute
More information1 Introduction. 2 Boundary Integral Equations
Analysis of sound transmission through a thin elastic plate by using boundary integral equations T. Terai*, Y. Kawai* "Department ofarchitecture, Faculty ofengineering, Kinki University, 1 Umenobe Takaya,
More informationDETC98/PTG-5788 VIBRO-ACOUSTIC STUDIES OF TRANSMISSION CASING STRUCTURES
Proceedings of DETC98: 1998 ASME Design Engineering Technical Conference September 13-16, 1998, Atlanta, GA DETC98/PTG-5788 VIBRO-ACOUSTIC STUDIES O TRANSMISSION CASING STRUCTURES D. Crimaldi Graduate
More informationComputing the Acoustic Field of a Radiating Cavity by the Boundary Element - Rayleigh Integral Method (BERIM)
Computing the Acoustic Field of a Radiating Cavity by the Boundary Element - Rayleigh Integral Method (BERIM) Stephen Kirkup and Ambrose Thompson Abstract This paper describes the Fortran subroutine BERIM3
More informationStudies of Sound Radiation From Beams with Acoustic Black Holes
Studies of Sound Radiation From Beams with Acoustic Black Holes Chenhui Zhao 1, M.G. Prasad 2 Stevens Institute of Technology Abstract: Recently, Acoustic Black Holes (), a new passive structural modification
More informationA PLANE WAVE SUPERPOSITION METHOD:
The Pennsylvania State University The Graduate School College of Engineering A PLANE WAVE SUPERPOSITION METHOD: MODELING ACOUSTIC FIELDS INSIDE CAVITIES A Thesis in Acoustics by Matthew J. Kamrath 2014
More informationImplementation aspects of the Boundary Element Method including viscous and thermal losses
Implementation aspects of the Boundary Element Method including viscous and thermal losses Vicente CUTANDA HENRIQUEZ 1 ; Peter JUHL 2 1,2 University of Southern Denmark, Denmark ABSTRACT The implementation
More informationA HYBRID WAVE BASED VIBRO-ACOUSTIC MODELLING TECHNIQUE FOR THE PREDICTION OF INTERIOR NOISE IN AN AIRCRAFT FUSELAGE
25th INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES A HYBRID WAVE BASED VIBRO-ACOUSTIC MODELLING TECHNIQUE FOR THE PREDICTION OF INTERIOR NOISE IN AN AIRCRAFT FUSELAGE B. Van Genechten, D. Vandepitte,
More informationSound Transmission in an Extended Tube Resonator
2016 Published in 4th International Symposium on Innovative Technologies in Engineering and Science 3-5 November 2016 (ISITES2016 Alanya/Antalya - Turkey) Sound Transmission in an Extended Tube Resonator
More informationr p = r o r cos( φ ) cos( α )
Section 4. : Sound Radiation Pattern from the Mouth of a Horn In the previous section, the acoustic impedance at the mouth of a horn was calculated. Distributed simple sources were used to model the mouth
More informationDynamic analysis of Composite Micro Air Vehicles
Dynamic analysis of Composite Micro Air Vehicles Shishir Kr. Sahu Professor and Head, Civil Engineering, National Institute of Technology, Rourkela, India E-mail: sksahu@nitrkl.ac.in ABSTRACT The present
More informationTHE objective of this paper is to present an analytical approach
AIAA JOURNAL Vol. 45, No. 6, June 2007 Sensitivity Analysis and Optimization Using Energy Finite Element and Boundary Element Methods Jun Dong and Kyung K. Choi University of Iowa, Iowa City, Iowa 52242
More informationVibro-Acoustics of a Brake Rotor with Focus on Squeal Noise. Abstract
Te International Congress and Exposition on Noise Control Engineering Dearbor MI, USA. August 9-, Vibro-Acoustics of a Brake Rotor wit Focus on Sueal Noise H. Lee and R. Sing Acoustics and Dynamics Laboratory,
More informationAcoustic Radiation Modes of a Tire on a Reflecting Surface
Purdue University Purdue e-pubs Publications of the Ray W. Herrick Laboratories School of Mechanical Engineering 3-2005 Acoustic Radiation Modes of a Tire on a Reflecting Surface Kiho Yum Purdue University
More informationA simple formula for insertion loss prediction of large acoustical enclosures using statistical energy analysis method
csnak, 014 Int. J. Nav. Archit. Ocean Eng. (014) 6:894~903 http://dx.doi.org/10.478/ijnaoe-013-00 pissn: 09-678, eissn: 09-6790 A simple formula for insertion loss prediction of large acoustical enclosures
More informationCopyright 2012 Tech Science Press CMES, vol.2067, no.1, pp.1-14, 2012
CMES Galley ro Only lease Return in 48 Hours. 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 17 18 19 0 1 3 4 5 6 7 Copyright 01 Tech Science ress CMES, vol.067, no.1, pp.1-14, 01 rediction High-frequency Vibro-
More informationEfficient calculation for evaluating vast amounts of quadrupole sources in BEM using fast multipole method
PROCEEDINGS of the 22 nd International Congress on Acoustics Boundary Element and Meshless Methods on Acoustics and Vibrations: Paper ICA2016-309 Efficient calculation for evaluating vast amounts of quadrupole
More informationPrediction of the radiated sound power from a fluid-loaded finite cylinder using the surface contribution method
Prediction of the radiated sound power from a fluid-loaded finite cylinder using the surface contribution method Daipei LIU 1 ; Herwig PETERS 1 ; Nicole KESSISSOGLOU 1 ; Steffen MARBURG 2 ; 1 School of
More informationAircraft Cabin Acoustic Modeling
Penn State 2012 Center for Acoustics and Vibration Workshop Aircraft Cabin Acoustic Modeling 2012 Penn State Center for Acoustics and Vibration Workshop Adam Weston Senior Structural-Acoustics Specialist
More informationVibration Generations Mechanisms: Flow Induced
Vibration Generations Mechanisms: Flow Induced Introduction That sound and vibration generation and flow are correlated is apparent from a range of phenomena that we can observe around us. A noteworthy
More informationStatic pressure and temperature coefficients of working standard microphones
Static pressure and temperature coefficients of working standard microphones Salvador BARRERA-FIGUEROA 1 ; Vicente CUTANDA-HENRÍQUEZ ; Antoni TORRAS-ROSELL 3 1,3 Danish Fundamental Metrology (DFM) A/S,
More informationMicro-perforates in vibro-acoustic systems Li CHENG
Micro-perforates in vibro-acoustic systems Li CHENG Chair Professor and Director Consortium for Sound and Vibration research Department of Mechanical Engineering The Hong Kong Polytechnic University CAV
More informationEfficient modeling of sound source radiation in free-space and room environments
Purdue University Purdue e-pubs Open Access Dissertations Theses and Dissertations 8-216 Efficient modeling of sound source radiation in free-space and room environments Yangfan Liu Purdue University Follow
More informationSound Pressure Generated by a Bubble
Sound Pressure Generated by a Bubble Adrian Secord Dept. of Computer Science University of British Columbia ajsecord@cs.ubc.ca October 22, 2001 This report summarises the analytical expression for the
More informationSTRUCTURAL ANALYSIS OF THE EXHAUST GAS SILENCER FOR THE FLOW THROUGH PERFORATED AND NON-PERFORATED SILENCER
STRUCTURAL ANALYSIS OF THE EXHAUST GAS SILENCER FOR THE FLOW THROUGH PERFORATED AND NON-PERFORATED SILENCER Rajesh Kumar Meena 1, Sushovan Chatterjee 2 1,2 Department of Mechanical Engineering, National
More informationPrediction of Light Rail Vehicle Noise in Running Condition using SEA
Prediction of Light Rail Vehicle Noise in Running Condition using SEA Sebastian PREIS ; Gérard BORELLO Siemens AG Austria Urban Transport, Austria InterAC, France ABSTRACT A complete Light Rail vehicle
More informationTOPOLOGY OPTIMIZATION APPROACH OF DAMPING TREATMENT IN CABIN ACOUSTIC DESIGN
TOPOLOGY OPTIMIZATION APPROACH OF DAMPING TREATMENT IN CABIN ACOUSTIC DESIGN Jianrun Zhang, Beibei Sun, Xi Lu Southeast University, School of Mechanical Engineering, Nanjing, Jiangsu, China 211189 email:
More informationAEROELASTIC ANALYSIS OF SPHERICAL SHELLS
11th World Congress on Computational Mechanics (WCCM XI) 5th European Conference on Computational Mechanics (ECCM V) 6th European Conference on Computational Fluid Dynamics (ECFD VI) E. Oñate, J. Oliver
More informationSound Radiation Of Cast Iron
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2002 Sound Radiation Of Cast Iron N. I. Dreiman Tecumseh Products Company Follow this and
More informationSound radiation of the end of cylindrical duct application on industrial stacks
Acoustics 8 Paris Sound radiation of the end of cylindrical duct application on industrial stacs T. Simoneau Acoustique & Conseil, 7-9 rue des Grandes Terres, 9258 Rueil-Malmaison, France ts@acoustique-conseil.com
More informationINFLUENCE OF FILL EFFECT ON PAYLOAD IN A LARGE LAUNCH VEHICLE FAIRING
INFLUENCE OF FILL EFFECT ON PAYLOAD IN A LARGE LAUNCH VEHICLE FAIRING Zheng Ling State Key Laboratory of Mechanical Transmission, College of Automotive Engineering, Chongqing University, Chongqing email:
More informationSound radiation and transmission. Professor Phil Joseph. Departamento de Engenharia Mecânica
Sound radiation and transmission Professor Phil Joseph Departamento de Engenharia Mecânica SOUND RADIATION BY A PISTON The piston generates plane waves in the tube with particle velocity equal to its own.
More informationStatistical Energy Analysis Software & Training Materials, Part II
Statistical Energy Analysis Software & Training Materials, Part II Tom Irvine Dynamic Concepts, Inc. NASA Engineering & Safety Center (NESC) 20-22 June 2017 The Aerospace Corporation 2010 The Aerospace
More informationWojciech ŁAPKA, Czesław CEMPEL
ARCHIVES OF ACOUSTICS 33, 4 (Supplement), 65 70 (2008) COMPUTATIONAL AND EXPERIMENTAL INVESTIGATIONS OF A SOUND PRESSURE LEVEL DISTRIBUTION AT THE OUTLET OF THE SPIRAL DUCT Wojciech ŁAPKA, Czesław CEMPEL
More informationNote that W is the skin surface weight density in units of psf. An equivalent graph in terms of metric units is given in Appendix A.
VIBRATION RESPONSE OF A CYLINDRICAL SKIN TO ACOUSTIC PRESSURE VIA THE FRANKEN METHOD Revision H By Tom Irvine Email: tomirvine@aol.com September 16, 2008 Introduction The front end of a typical rocket
More informationEfficient boundary element analysis of periodic sound scatterers
Boundary Element and Meshless Methods in Acoustics and Vibrations: Paper ICA2016-418 Efficient boundary element analysis of periodic sound scatterers M. Karimi, P. Croaker, N. Kessissoglou 1 School of
More informationOptimization for heat and sound insulation of honeycomb sandwich panel in thermal environments
Optimization for heat and sound insulation of honeycomb sandwich panel in thermal environments Jinlong Yuan 1, Haibo Chen 2, Qiang Zhong 3, Kongjuan Li 4 Department of Modern mechanics, University of Science
More informationAcoustics of Suction Mufflers in Reciprocating Hermetic Compressors
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 4 Acoustics of Suction Mufflers in Reciprocating Hermetic Compressors Christian Svendsen
More informationSound Reduction Of Rotary Compressor Using Topology Optimization
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2002 Sound Reduction Of Rotary Compressor Using Topology Optimization S. Wang Kwangju Institute
More informationChapter 22 Gauss s Law. Copyright 2009 Pearson Education, Inc.
Chapter 22 Gauss s Law 22-1 Electric Flux Electric flux: Electric flux through an area is proportional to the total number of field lines crossing the area. 22-1 Electric Flux Example 22-1: Electric flux.
More informationImproved near-wall accuracy for solutions of the Helmholtz equation using the boundary element method
Center for Turbulence Research Annual Research Briefs 2006 313 Improved near-wall accuracy for solutions of the Helmholtz equation using the boundary element method By Y. Khalighi AND D. J. Bodony 1. Motivation
More informationPrediction of Sound Propagation From Power Transmission Plant
Prediction of Sound Propagation From Power Transmission Plant Jingchao Sun Stockholm, 2013 Thesis for the degree of Master of Science, 30 Hp Department of Sound and Vibration The Marcus Wallenberg Laboratory
More informationA) 4 B) 3 C) 2 D) 5 E) 6
Coordinator: Saleem Rao Monday, January 01, 2018 Page: 1 Q1. A standing wave having three nodes is set up in a string fixed at both ends. If the frequency of the wave is doubled, how many antinodes will
More information