Profile. Qualification University/Institute Specialization Department Other remarks

Transcription

1 Profile 1. Name : Dr. Ch Nagaraju 2. Address with , Land line and Mobile Nos. Official Address: Dr Ch Nagaraju Professor VR Siddhartha Engineering College Kanuru Vijayawada Mobile: Phone: (R) Ext: 705 (O) drnagarajucherukuri@gmail.com Permanent Address: Ch Nagaraju /1A, Dhanekulavari Street Ashok Nagar Vijayawada Mobile: Phone: (R) Ext: 705 (O) drnagarajucherukuri@gmail.com 3. Nationality : Indian 4. Religion : Hindu 5. Date of Birth : Educational Qualification : (from UG onwards) S. No. Qualification University/Institute Specialization Department Other remarks B Tech ME PGDCS PhD REC(NIT) Warangal Osmania University Central University JNTU Hyderabad Mech. Engg. Production Comp. science Design Mechanical Mechanical Comp. Science Mechanical Not regular Not regular 7. Details of Doctoral Thesis Area of Thesis work : Rotor Dynamics Title of Thesis : Fault Detection in Rotor System and Development of Micro Electro-Mechanical Sensor : Dr K Mallikarjuna Rao Year of Completion work: 2009

2 Year of award of PhD : 2009 S. No. 8. Professional Experience : Institute / Organization Position held Date of joining Duration Regular/ Adhoc /Ratified Lecturer Sr.Lecturer Asst.Professor Professor Professor years 3.75 years 2.8 years 1.5 years 7.25 years (till date) Ratified Adhoc Ratified Adhoc Ratified S. No. 9. Research projects completed as Coordinator : Title of the Project Funding agency Sanctioned amount and Year of Sanction Duration of the project Present status 1 Fault Diagnostics in Rotor Bearing System. AICTE Rs years Completed 10. Research Experience : (A) Ph.D scholars guided : S.No. Name of the Research Scholar Title of the Thesis Year of Award of Ph.D University /Institute who has awarded the degree / Co- 1 CH.Hari Krishna Experimental and finite element investigations on formability of AA2014 billets under simple upsetting 2015 NIT Warangal Co- (B) Ph.D scholars presently working : S.No. Name of the Research Scholar Area of the work Year of Registrati on Registered University /Institute / Co U Koteswara Rao P S K Reddy V S Kumar K Ravi Kumar A Syam Prasad Ch Rama Krishna Structures &Actuators. Smart structures Rotor Dynamics Design of Heat Exchangers. Viscoelastic Materials Manufacturing NIT Warangal Nagarjuna Nagarjuna JNTUK JNTUK JNTUK Co-. Co -

3 (C) Number of Publications : 37 S. No Status of Journal During Ph.D programme After Ph.D programme 1 International Journals National Journals International Conferences National Conferences 4 0 List of Publications : International Journals i. V.Sudheer Kumar,Ch. Nagaraju, M Balaji, An Investigation of Dynamic Characteristics of Milling Cutter for better Health Condition Monitoring European Journal of Advances in Engineering and Technology. 4(9), pp ,2017. ii. Ch Harikrishna, MJ Davidson, Ch, Nagaraju Effect of aging on hardness in the upsetting tests using experimental and finite element investigations Journal of Mechanical Engineering, SAGE DOI: / , Sept (Impact factor: 0.51) iii. P. Satheesh Kumar Reddy, Ch. Nagaraju Weight optimization and Finite Element Analysis of Composite automotive drive shaft for Maximum Stiffness Materials Today : Proceedings Elsevier.(Scopus indexed) Materials Today: Proceedings 4 (2017) iv. Chirala, H. K., Davidson, M. J., Cherukuri, N., Raju, P. S., and Rao, G. S. Effect of adhesion and cohesion on the ductile fracture in upsetting Journal of Testing and Evaluation. ASTM doi: /jte ASTM, (impact factor: 0.375) v. Hari Krishna Ch, Davidson M.J., Nagaraju Ch, A V Ratna Prasad Effect of Lubrication and Ansiotropy on hardness in Upsetting Transactions of Indian Institute of Metals, DOI /s y Springer. (Impact factor: 0.61). vi. Hari Krishna Ch, Davidson M.J., Nagaraju Ch Effect of Lubrication on hardness in the Ring compression Test J Mechanical Engineering Science, DOI: / Apr 2015 SAGE. (Impact factor: 0.51). vii. Hari Krishna Ch, Davidson M.J., Nagaraju Ch Investigation of work hardening behavior and failure analysis of billets due to biaxial stresses in simple upsetting process International Journal of Advanced Manufacturing Technology DOI /s y, 2015 Springer (impact factor: 1.7). viii. V. Sudheer Kumar, Ch. Harikrishna, Ch. Karthik Sai, Ch. Nagaraju, Dynamic Analysis of a Cracked Rotor - An Experimental and Finite Element Investigation (2015) Materials Today : Proceedings Elsevier.(Scopus indexed) ix. Hari Krishna Ch, Davidson M.J., Nagaraju Ch optimum Process Parameters for Enhanced hardness distribution and barreling behavior in upsetting Transactions of Indian Institute of Metals Doi: DOI /s y, 2014 Springer. (Impact factor: 0.42). x. Hari Krishna Ch, Davidson M.J., Nagaraju Ch Effect of Lubrication in Cold Upsetting Using Experimental and Finite Element Modeling ASTM Journal of Testing and Evaluation Vol 43, 2014, p (impact factor: 0.34). xi. Hari Krishna Ch, Davidson M.J., Nagaraju Ch Utilization of Workability Criteria to Improve the Formability of the Deformed Truncated Billets in Simple Upsetting Procedia Material Science, Vol 5, 2014, p Elsevier.(Scopus indexed) xii. P Satheesh Kumar Reddy, Ch Nagaraju, Tailoring of composite cantilever beam for maximum stiffness and minimum weight International Organization of Scientific

4 Research, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: ,p-ISSN: X, Volume 9, Issue 5 (Nov - Dec. 2013), PP xiii. P Satheesh Kumar Reddy, Ch Nagaraju, Optimum Design and Analysis of Filament Wound Composite Tubes in Pure and Combined Loading International Journal of Engineering Research & Technology (IJERT) ISSN: , Vol. 1 Issue 8, October xiv. Nagul Shareef Sk., Hari Krishna Ch, Davidson M.J., Nagaraju Ch, Analysis of Biaxial and Tri-axial State of stresses in Plastically Deformed Solid Cylindrical Specimens under Dry lubrication Advanced Materials Research, Vol 585, 2012, p Trans Tech publications (Scopus indexed). xv. S. Bhagya Lakshmi, Sudheer Kumar V, Ch.Nagaraju, Dynamic Analysis of Honda Engine Crank Shaft, International Journal of Engineering and Innovative Technology (IJEIT) vol.2(1), July 2012, PP xvi. Nagaraju Cherukuri, U Koteswara Rao, K Mallikarjuna Rao and K V Ramana Development of Micro Electro Mechanical Sensor for Rotor Bearing System International Journal of Materials Sciences (IJOMS) 6 (2) xvii. Nagaraju Cherukuri D. Sai Sandeep V N S Amit Kumar and K Mallikarjunarao Application of HTT for Beam Element International Journal of Engineering Science and Technology [IJEST] 2(6) xviii. Nagaraju Cherukuri, K Narayana Rao and K Mallikarjuna Rao Detection of Delamination in a Glass/Epoxy Composite Rotor based on Vibration Analysis International Journal of Materials Sciences (IJOMS) Vol.4(1), 2009, PP xix. C Nagaraju, K Narayana Rao and K Mallikarjuna Rao Detection of crack in a transient stepped rotor system using continuous wavelet transform International Journal of Applied Engineering Research (IJAER) Vol.3(3), 2008, PP National Journals: i. C Nagaraju K Narayana Rao and K Mallikarjuna Rao Application of Continuous Wavelet and Cross Wavelet Transforms for Crack Detection in Rotor Systems Technology Spectrum (JNTU), Vol.1 (3) 2007, ii. C Nagaraju K Narayana Rao and K Mallikarjuna Rao Application of 3D Wavelet Transforms for Crack Detection in Rotor Systems Indian Academy of Sciences(Springer) International Conferences: i. Ramanjaneyulu V., Naga Raju Ch., Chandra Mohan R., Balakrishna Murthy V., Analysis of Composite Rocket Motor Case using Finite Element Method, 7th International Conference on Materials Processing and Characterization (ICMPC- 2017) march 2017, pp 118, GRIET (Collaboration:MANIT) Hyderabad. ii. V Sudheer kumar Ch. Nagaraju V U S V Prasad T. Hari Krishna Modal Analysis Of Cracked Rotor System Using Finite Element Method D October 3-4, 2015 ISME17 IIT Delhi. iii. U. Koteswara Rao,P. Bangaru Babu, C, Nagaraju Active Repair Of Engineering structures Using Piezoelectric Patches D October 3-4, 2015 ISME17 IIT Delhi iv. Ch. Harikrishna, M.J. Davidson, K. Balasubramanian, Ch.Nagaraju, Experimental and Finite Element Investigation of Flow-formed tube to Control Defects, ISRS-2012, IIT Madras, Dec th, pp 11, v. Ch. Harikrishna, P. Kiranmai,, M.J. Davidson, Ch.Nagaraju, Analysis Of Damage Mechanics And Ductile Fractures In The Cold Upsetting Of AA2014 Cylindrical Billets, ACMFMS-2012, IIT Delhi, Dec 5-8, vi. Nagaraju Ch, HariKrishna Ch, Koteswara Rao U, Vibration Analysis of structural Element by Employing Spectrum Analyzer, ICEMP-2014, CSIR-IMMT- Bhubaneswar, Feb 26 th -28 th, pp vii. Nagaraju Ch, HariKrishna ch, MallikarjunaRao A, Harikirshna T, Application of Signature Analysis for the Structural Health Monitoring of a Rotor, IC MEETS- 2014, MANIT-Bhopal, Jan 29 th -31 st, Vol. (2), pp

5 viii. Ch. Harikrishna, M.J. Davidson, K. Balasubramanian, Ch.Nagaraju, Experimental and Finite Element Investigation of Flow-formed tube to Control Defects, ISRS-2102, IIT Madras, Dec th, pp 11, ix. P. Kiranmai,, Ch. Harikrishna, M.J. Davidson, Ch.Nagaraju, Analysis Of Damage Mechanics And Ductile Fractures In The Cold Upsetting Of AA2014 Cylindrical Billets, ACMFMS-2102, IIT Delhi, Dec 5-8, x. Sk. Nagul shareef, Ch. Harikrishna, M.J. Davidson, Ch.Nagaraju, Analysis of Biaxial and Tri-axial State of stresses in Plastically Deformed Solid Cylindrical Specimens under Dry lubrication, AMPCO 2012, IIT Roorkee, Nov 1-3, PP 58, xi. Pradeep Kumar J, Nagaraju Ch, Sreedeepthi I, Mallikarjuna Rao, Analysis of a functionally graded beams under transverse loading Proceedings of Joint International Conference on Advanced Materials-2011(ICAM-2011), Bangalore, , August xii. P Satheesh Kumar Reddy, Ch Nagaraju, K V Ramana, P Sadasiva Srinivas, Optimum Design and Finite Element Analysis Of Glass/Carbon/Boron Fiber Reinforced Epoxy Composite Automotive Drive Shaft International Conference on advanced Materials(ICAM- 2011) PSG College of Technology, Coimbatore, , December,2011. National Conferences i. P.V.Rao, Ch. Nagaraju, Ch.V.V. Rama Rao, "Computer Aided Selection of Unconventional Machining Process", Proceedings of 17th AIMTDR; REC Warangal, 9-11 Jan ii. Ch.Nagaraju, P.V.Rao; "Estimation of cutting forces using ANN" Proceedings of 17th AIMTDR; REC Warangal 9-11 Jan iii. Ch.Nagaraju P.V.Rao "Applying analysis of variance to quality control for bulk products", MIT, Madras, Feb iv. V.G.N.Rao, V.S.R.Murty Ch. Nagaraju, G.H.D Banadeki; "Some studies on wear phenomena of Wire Electrode in EDM" Proceedings of 16th AIMTDR; CMTI, Bangalore 8-10 Dec (E) Patents Applied : S. No. Title of the Patent Agency to which application is made Year of application NIL (F) Patents Received : S. No. Title of the Patent Agency which has awarded the patent Year NIL 11. Areas of research interests : Metal Forming, Smart/Intelligent Structures, Simulation, Finite element analysis, Vibration analysis, Rotor dynamics, Micro Rotors, Wavelet analysis Computational Fluid Dynamics, Optimization Techniques, Manufacturing Industrial Engineering. 12. Awards : Nil 13. Text Books authored : Nil 14. Membership in Professional organizations : ISTE 15. Other information (if any)

6 Faculty Development Programme Organized: 1. A grant of Rs. 4,20,000/- was sanctioned by AICTE New Delhi under Staff Development program (File No:RIFD/SDP/212/ , Dated: ), Title: Machine Condition Monitoring & Fault Diagnostics, (25 th June- 7 th July), Seminars/Workshops/Conferences organized: 1. A grant of Rs. 50,000 was sanctioned by DST Govt. of India as Seminar grant.(file No:SR/SS/197/ dated ) Seminar on: Advanced Fault Detection and Signal Processing Techniques for Mechanical Systems. 2. A grant of Rs. 50,000 was sanctioned by DST Govt. of India as Seminar grant.(file No:SR/SS/380/ dated ) Seminar on: Detection Of Malfunctioning In Rotor Systems: Power Plants & Aircraft Systems. 3. A grant of Rs. 40,000 was sanctioned by DST Govt. of India as Seminar grant.(file No:SR/SS/170/ dated ) Seminar on: Finite Element Formulation for Nano Structures. Faculty Development Programmes and workshops attended: Participated in SERC School on Advanced Manufacturing Technology sponsored by DST held at IIT Delhi during 2-14 Nov, Participated in the Short term Training Programme on Machine Condition Monitoring and Fault Diagnostics sponsored by AICTE, New Delhi held at IIT Madras during 9-14 July,2007. Participated in workshop for Training Resource Persons on Outcome Based Accreditation sponsored by JNTUK conducted by VR Siddhartha Engineering College on 13 th Sept and during th September Participated in the Programme on Managing Excellence in Academic Institutions for Heads of Institution/Department of TEQIP Institutions held at Administrative College of India Hyderabad during Sept 30 th Oct 4 th, Participated in a Five Day Short term Course on Essential Techniques for Research Problems in Materials and Manufacturing (ETRPMM) held at NIT Warangal during 14 th -18 th April 2014