UI FORMULATION FOR CABLE STATE OF EXISTING CABLE-STAYED BRIDGE
|
|
- Paulina Small
- 5 years ago
- Views:
Transcription
1 UI FORMULATION FOR CABLE STATE OF EXISTING CABLE-STAYED BRIDGE Juan Huang, Ronghui Wang and Tao Tang Coege of Traffic and Communications, South China University of Technoogy, Guangzhou, Guangdong 51641, P.R. China ABSTRACT As incined cabes are primary oad-bearing members of cabe-stayed bridges, the accuracy of the method of anaysing cabe state is a key issue in keeping existing bridges safe. Typica cabe characteristics are that they are susceptibe to corrosion and tend to sag during their ong service ife, so it is essentia to take these characteristics into account in the structura anaysis to determine the actua behaviour of a cabe in service. However, most of the recent methods of cabe structure anaysis are done on the materia in a perfect state. The deterioration characteristics, such as cabe corrosion and initia sag caused by the cabe weight, are disregarded, which makes it difficut to appy the current methods when deaing with cabe structures that are in service. By soving the boundary probem of incined cabe using the governing differentia equation for the UL (Updated Lagrangian) formuation, this paper introduces a convergence iterative soution method for the anaysis of cabe structures of existing cabe-stayed bridges. When using the iterative soution, it is convenient to determine the reationship between the co-ordinate difference of cabe-end position, cabe tension and cabe weight. With the approach described in this paper, the effect of cabe sag can be incuded without any approximations. Moreover, cabe corrosion described by the method eads to good accuracy of resuts. The method meets the engineering requirements for the anaysis of existing ong-span cabe structures. The resuts obtained from the method show that it is efficient and reiabe. It can be convenienty appied in the anaysis of arge-dispacement cabe structures that are in service, which provides a new approach to structura heath monitoring of ong-span cabe-stayed bridges. 1. INTRODUCTION Incined cabes are primary oading-bearing members of cabe-stayed bridges. The accuracy of the method to determine cabe state is a key issue in keeping existing bridges safe. In view of the fact that extreme fexibiity and susceptibiity to corrosion are typica characteristics of stee cabe, this eads to high stress eves during its service ife. The geometric non-inearity and corrosion effects shoud therefore be taken into account to describe the actua behaviour of cabes. The geometric non-inearity of cabe structures has been studied extensivey, and a considerabe number of anaytica techniques and computer modes have been deveoped and are avaiabe. Ernst (1965), Kwan (1998), Mitsugi (1994), and Leonard (1988) modeed cabe as a series of straight inear eements. A arge number of eements and specific formuations have been proposed to improve the performance of the straight eements taking into account the non-inear behaviour of the cabe. Ahmadi-Kashani (1983), Jayaraman and Knudson (1981), and Gambhir and Batcheor (1986) used curved eements to describe the highy non-inear nature of the cabe probem. However, most avaiabe Proceedings of the 6 th Southern African Transport Conference (SATC 7) 9-1 Juy 7 ISBN Number: X Pretoria, South Africa Produced by: Document Transformation Technoogies cc Conference organised by: Conference Panners 745
2 methods are given with the materia in a perfect state, and disregard cabe deterioration characteristics, such as cabe corrosion and initia sag causing by cabe weight, which makes the appication of the current methods difficut when deaing with cabe structures that are in service. By soving the boundary probem of incined cabe with the governing differentia equation of the Updated Lagrangian formuation, a convergence iterative soution method is introduced for the anaysis of cabe state of existing cabe-stayed bridges. Using the approach described in this paper, the effect of cabe sag can be incuded without any approximations. Moreover, cabe corrosion characteristic are described, and the method presented makes it possibe to sove the divergence probem of stress reaxation of cabes that occur when using other techniques, which eads to good accuracy of resuts. The method meets the engineering requirements of the anaysis of existing ong-span cabe structures.. BEHAVIOUR OF INCLINED CABLE SEGMENT Basic assumptions As incined cabes of cabe-stayed bridges are highy fexibe, they undergo arge dispacements and shoud therefore be anaysed taking into account geometric non-inearity. In order to better describe the behaviour of incined cabes, some assumptions shoud be made as foows: 1. Incined cabes have no bending and bucking resistance and can sustain ony tensie forces.. Strains wi be sma, athough arge dispacements take pace when incined cabe is in service. 3. Cabe weight oading is uniformy distributed aong the ength of the cabe and cabe tension is directed aong the tangent to the cabe segment. Figure 1. Cabe equiibrium 746
3 Equiibrium equations of incined cabe The incined cabe shown in Figure 1 (a) is suspended between two fixed points A and B. Let q denote the intensity of cabe weight oading per unit ength of the segment. The horizonta coordinate x is the independent variabe. The dependent variabes wi be the components of tension H and V, the vertica defection z, and the deformed and undeformed engths of the cabe S and S. A free-body diagram of a differentia ength of the cabe segment is shown in Figure 1 (b). The equiibrium of forces on the differentia ength are given as: where dh ΣX =, dx = dx d dz ΣZ =, ( H ) dx + qds = dx dx (1) H is the horizonta component of cabe tension which is constant throughout the span since no ongitudina oads are acting. Because the foowing geometric constraint must be satisfied: dx dz + = 1 ds ds we can rewrite equation (1) as: H = H = cons tan t d z dz H + q 1 + ( ) = dx dx which is the cassic catenary equation for the defected profie z of the arc. () (3) The boundary conditions at the cabe supports A and B are: x=, z = x = z, = c Appying the boundary conditions and integrating equation (3) twice, we obtain: (4) H βx z = coshα cosh( ) q α (5) β ( c / ) α = sinh 1 + β β sinh (6) β = q H (7) The behaviour of a catenary segment of incined cabe is described by equations (5) to (7) in terms of an as yet unknown horizonta force H. If β were specified, the non-inear equation (5) coud be soved numericay for β and hence. H 747
4 3. DESCRIPTION OF CABLE CORROSION Cabes for cabe-stayed bridges are susceptibe to corrosion during their service ife. Because the accuracy in describing cabe state is critica in the evauation of the tensie forces of the cabes, which in turn are responsibe for the strength of the whoe structure, cabe corrosion deterioration shoud therefore be taken into account to mode the actua behaviour of cabes, athough corrosion probems associated with cabe-supported structures tend to be unique and compex (Hopwood and Havens, 1984). We consider mechanisms of cabe corrosion deterioration that resut in the reduction in cabe cross-sectiona area. We make this assumption here for the reason that simpified soutions can be deveoped that can satisfy the engineering requirements. Let denote the cross-sectiona area of the incined cabe in a perfect state, and due to cabe corrosion. Now we can define the effective area A ~ as: * A A be the impaired area * A % = A A (8) Then the corresponding corrosion ratio D can be defined in the form: * A A D A A = = A% (9) Figure. Equivaent-strain for corrosion cabe Since incined cabe can ony be oaded by tension, the norma stresses of an incined cabe in a perfect state and in a corrosion state may be defined by Cauchy stress σ and effective stress σ ~ respectivey. We obtain: T σ = ~ T σ = ~ (1) A A Since σ A = % σ A% and according to equation (9) we obtain: ~ σ σ = (11) 1 D By introducing Lemaitre s (1971) equivaent-strain principe, which is a usefu method for evauating damage in meta structures subjected to tension and dynamic oading, the constitutive reationship of incined cabe in a corrosion state can be determined by the Cauchy stress of cabe in a perfect state. Using the principe, it can be proved that corroded cabe subjected to Cauchy stress σ is equivaent to perfect cabe subjected to effective stress ~ σ on condition that the corresponding strains are the same, as shown in Figure. The principe can be written as: 748
5 σ ~ σ σ ε = ~ = = (1) E E (1 D) E Then from equations (11) and (1), the effective moduus of easticity E ~ for corroded cabe can be arrived at by: A E% = % E (13) A Based on the above discussion, the corrosion characteristic of incined cabe has been taken into consideration by rationa discounting of the moduus of easticity, and a convenient way to determine the actua cabe state of existing cabe structures in engineering has been deveoped. 4. DETERMINATION OF TENSION AND DEFORMATION OF CORROSION CABLE According to the geometry of the differentia ength as shown in Figure 1, the stretched ength S of the incined cabe is obtained from equation (5) as foows: dz βc S dx β Aso, since the tension must be directed aong the tangent to the arc: = ds = 1+ ( ) dx = sinh β + ( ) (14) H T = (15) cosθ Based on Lemaitre s equivaent-strain principe, the catenary deformation is cacuated as: T H q ε = = = EA % EA % cosθ EA % βcosθ Thus the increased ength of the incined cabe is: S q coth β βc S S = εds = sinh β + ( ) + 1 4EA % β β Substituting equation (14) in equation (17) yieds: βc q coth β βc sinh β + ( ) S = sinh β + ( ) + 1 β 4EA % β β Rewriting equation (17) as a function of β, we obtain: (16) (17) (18) sinh β q coth β βc F( β) = c + ( ) S sinh β + ( ) + 1 β 4EA % β β (19) 749
6 Figure 3. Graph of function F( β ) Equation (19) coud be soved directy for β using numerica procedures. Figure 3 is obtained by appying four equaised increments, and a modified Newton-Raphson iteration was performed after each increment to achieve a convergence toerance of.1. It is easy to verify that F() and F (+ ) +, and there is just one positive root in β (, + ) from Descartes rue of signs, which is the required vaue of F (β ). Once we obtain a soution to equation (19), equation (7) can be used to determine H. With reference to Figure 1(a), static equiibrium equations wi be invoved in determining the horizonta and vertica components of cabe tension at two supports. q H = () β V B = H βc coth β βc β + ( sinh ) βc βc V A = H coth β + sinh β + ( ) () H B = (3) H H A = H (4) and therefore the tension of the incined cabe is: H βc βx βc βx T = sinh β + ( ) cosh( β ) + sinh( β ) (5) sinh β When the cabe-end position is not changed reative to the vertica and horizonta distance, the cabe shape and cabe stress can be cacuated directy by appying the convergence iterative soution method in this paper. Based on the approach presented, oading techniques associated with the behaviour of arge-dispacement incined cabe during the appication of oads are then obtained. We shoud first take the unstressed cabe state as the initia state, during which there is no cabe weight oading and the incined cabe is suspended in a straight ine between two fixed supports. If the first step increment of oading is appied, c and wi be obtained by the coordinate difference of the cabe-end position. We then obtain iterative soution β, and the deformed ength of the cabe as we as the cabe tension can consequenty be determined. To improve the accuracy of the convergence iterative soution method presented in this paper, it is recommended that dead oad be appied in sma increments. In this way the effect of cabe sag caused by cabe weight oading can be incuded without any approximations. (1) 75
7 On the other hand, cabes woud become sack and stress reaxation woud occur if the reative cabe-end position is changed during service ife. The divergence probem wi be encountered if Ernst s equivaent moduus is used in this case. Such probems can be avoided by adopting the method presented with the incrementa oading scheme. If the cabe-end position is taken as the current reference configuration after the previous increment oad has been appied, we may search for a dispacement increment due to the current added increment oad. Therefore the actua cabe-end position after the current increment oad has been appied is an iterative soution, which can be as theoreticay accurate as required. 5. CONCLUSIONS By introducing Lemaitre s equivaent-strain principe, the corrosion characteristic of incined cabe is taken into consideration by rationa discounting of the moduus of easticity. A convenient engineering method has been deveoped and expored to determine the actua cabe state of existing cabe structures. The scheme presented for the cacuation of arge cabe dispacements makes it possibe to sove the divergence probem of stress reaxation of cabes caused by the use of other techniques, and provides a new approach to structura heath monitoring of ong-span cabe-stayed bridges. 6. REFERENCES [1] Ahmadi-Kashani, K, Deveopment of cabe eements and their appications in the anaysis of cabe structures. PhD thesis, University of Manchester, Institute of Science and Technoogy (UMIST), UK. [] Ernst, JH, Der E-modu von Seien unter Berücksichtigung des Durchganges. Der Bauingenieur, 4, pp [3] Gambhir, ML and Batcheor, Finite eements for cabe anaysis. Int. J of Structure, 6, pp [4] Hopwood, T and Havens, JH, Corrosion of cabe suspension bridges. In co-operation with Transportation Cabinet, Commonweath of Kentucky and Fed. Highway Administration, U.S. Dept. of Transportation, Kentucky Transportation Research Program, Univ. of Kentucky, Lexington, USA. [5] Jayaraman, HB and Knudson, WC, A curved eement for the anaysis of cabe structures. Computers & Structures, 14, pp [6] Kwan, ASK, A new approach to geometric noninearity of cabe structures. Computers & Structures, 67, pp [7] Lemaitre, J., Evauation of dissipation and damage in metas subjected to dynamic oading. Proc. of ICM1, Kyoto, [8] Leonard, JW, Tension Structures, McGraw-Hi, New York. [9] Mitsugi, J, Static anaysis of cabe networks and their supporting structures. Computers & Structures, 51, pp
Technical Data for Profiles. Groove position, external dimensions and modular dimensions
Technica Data for Profies Extruded Profie Symbo A Mg Si 0.5 F 25 Materia number.206.72 Status: artificiay aged Mechanica vaues (appy ony in pressing direction) Tensie strength Rm min. 245 N/mm 2 Yied point
More informationNonlinear Analysis of Spatial Trusses
Noninear Anaysis of Spatia Trusses João Barrigó October 14 Abstract The present work addresses the noninear behavior of space trusses A formuation for geometrica noninear anaysis is presented, which incudes
More informationLecture 6: Moderately Large Deflection Theory of Beams
Structura Mechanics 2.8 Lecture 6 Semester Yr Lecture 6: Moderatey Large Defection Theory of Beams 6.1 Genera Formuation Compare to the cassica theory of beams with infinitesima deformation, the moderatey
More informationModule 2. Analysis of Statically Indeterminate Structures by the Matrix Force Method. Version 2 CE IIT, Kharagpur
odue 2 naysis of Staticay ndeterminate Structures by the atri Force ethod Version 2 E T, Kharagpur esson 12 The Three-oment Equations- Version 2 E T, Kharagpur nstructiona Objectives fter reading this
More information3.10 Implications of Redundancy
118 IB Structures 2008-9 3.10 Impications of Redundancy An important aspect of redundant structures is that it is possibe to have interna forces within the structure, with no externa oading being appied.
More informationCABLE SUPPORTED STRUCTURES
CABLE SUPPORTED STRUCTURES STATIC AND DYNAMIC ANALYSIS OF CABLES 3/22/2005 Prof. dr Stanko Brcic 1 Cabe Supported Structures Suspension bridges Cabe-Stayed Bridges Masts Roof structures etc 3/22/2005 Prof.
More informationWork and energy method. Exercise 1 : Beam with a couple. Exercise 1 : Non-linear loaddisplacement. Exercise 2 : Horizontally loaded frame
Work and energy method EI EI T x-axis Exercise 1 : Beam with a coupe Determine the rotation at the right support of the construction dispayed on the right, caused by the coupe T using Castigiano s nd theorem.
More informationCE601-Structura Anaysis I UNIT-IV SOPE-DEFECTION METHOD 1. What are the assumptions made in sope-defection method? (i) Between each pair of the supports the beam section is constant. (ii) The joint in
More informationTHE OUT-OF-PLANE BEHAVIOUR OF SPREAD-TOW FABRICS
ECCM6-6 TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Sevie, Spain, -6 June 04 THE OUT-OF-PLANE BEHAVIOUR OF SPREAD-TOW FABRICS M. Wysocki a,b*, M. Szpieg a, P. Heström a and F. Ohsson c a Swerea SICOMP
More informationANALYTICAL AND EXPERIMENTAL STUDY OF FRP-STRENGTHENED RC BEAM-COLUMN JOINTS. Abstract
ANALYTICAL AND EXPERIMENTAL STUDY OF FRP-STRENGTHENED RC BEAM-COLUMN JOINTS Dr. Costas P. Antonopouos, University of Patras, Greece Assoc. Prof. Thanasis C. Triantafiou, University of Patras, Greece Abstract
More informationELASTICITY PREVIOUS EAMCET QUESTIONS ENGINEERING
ELASTICITY PREVIOUS EAMCET QUESTIONS ENGINEERING. If the ratio of engths, radii and young s modui of stee and brass wires shown in the figure are a, b and c respectivey, the ratio between the increase
More informationLecture 9. Stability of Elastic Structures. Lecture 10. Advanced Topic in Column Buckling
Lecture 9 Stabiity of Eastic Structures Lecture 1 Advanced Topic in Coumn Bucking robem 9-1: A camped-free coumn is oaded at its tip by a oad. The issue here is to find the itica bucking oad. a) Suggest
More informationMECHANICAL ENGINEERING
1 SSC-JE SFF SELECION COMMISSION MECHNICL ENGINEERING SUDY MERIL Cassroom Posta Correspondence est-series16 Rights Reserved www.sscje.com C O N E N 1. SIMPLE SRESSES ND SRINS 3-3. PRINCIPL SRESS ND SRIN
More informationIn-plane shear stiffness of bare steel deck through shell finite element models. G. Bian, B.W. Schafer. June 2017
In-pane shear stiffness of bare stee deck through she finite eement modes G. Bian, B.W. Schafer June 7 COLD-FORMED STEEL RESEARCH CONSORTIUM REPORT SERIES CFSRC R-7- SDII Stee Diaphragm Innovation Initiative
More informationСРАВНИТЕЛЕН АНАЛИЗ НА МОДЕЛИ НА ГРЕДИ НА ЕЛАСТИЧНА ОСНОВА COMPARATIVE ANALYSIS OF ELASTIC FOUNDATION MODELS FOR BEAMS
СРАВНИТЕЛЕН АНАЛИЗ НА МОДЕЛИ НА ГРЕДИ НА ЕЛАСТИЧНА ОСНОВА Милко Стоянов Милошев 1, Константин Савков Казаков 2 Висше Строително Училище Л. Каравелов - София COMPARATIVE ANALYSIS OF ELASTIC FOUNDATION MODELS
More informationLecture Notes for Math 251: ODE and PDE. Lecture 34: 10.7 Wave Equation and Vibrations of an Elastic String
ecture Notes for Math 251: ODE and PDE. ecture 3: 1.7 Wave Equation and Vibrations of an Eastic String Shawn D. Ryan Spring 212 ast Time: We studied other Heat Equation probems with various other boundary
More informationSIMULATION OF TEXTILE COMPOSITE REINFORCEMENT USING ROTATION FREE SHELL FINITE ELEMENT
8 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS SIMULATION OF TEXTILE COMPOSITE REINFORCEMENT USING ROTATION FREE SHELL FINITE ELEMENT P. Wang, N. Hamia *, P. Boisse Universite de Lyon, INSA-Lyon,
More informationBending Analysis of Continuous Castellated Beams
Bending Anaysis of Continuous Casteated Beams * Sahar Eaiwi 1), Boksun Kim ) and Long-yuan Li 3) 1), ), 3) Schoo of Engineering, Pymouth University, Drake Circus, Pymouth, UK PL4 8AA 1) sahar.eaiwi@pymouth.ac.uk
More informationPost-buckling behaviour of a slender beam in a circular tube, under axial load
Computationa Metho and Experimenta Measurements XIII 547 Post-bucking behaviour of a sender beam in a circuar tube, under axia oad M. Gh. Munteanu & A. Barraco Transivania University of Brasov, Romania
More informationOn a geometrical approach in contact mechanics
Institut für Mechanik On a geometrica approach in contact mechanics Aexander Konyukhov, Kar Schweizerhof Universität Karsruhe, Institut für Mechanik Institut für Mechanik Kaiserstr. 12, Geb. 20.30 76128
More informationMalaysian Journal of Civil Engineering 30(2): (2018)
Maaysian Journa of Ci Engineering 3():331-346 (18) BUBNOV-GALERKIN METHOD FOR THE ELASTIC BUCKLING OF EULER COLUMNS Ofondu I.O. 1, Ikwueze E. U. & Ike C. C. * 1 Dept. of Mechanica and Production Engineering,
More informationTorsion and shear stresses due to shear centre eccentricity in SCIA Engineer Delft University of Technology. Marijn Drillenburg
Torsion and shear stresses due to shear centre eccentricity in SCIA Engineer Deft University of Technoogy Marijn Drienburg October 2017 Contents 1 Introduction 2 1.1 Hand Cacuation....................................
More informationLobontiu: System Dynamics for Engineering Students Website Chapter 3 1. z b z
Chapter W3 Mechanica Systems II Introduction This companion website chapter anayzes the foowing topics in connection to the printed-book Chapter 3: Lumped-parameter inertia fractions of basic compiant
More informationKINGS COLLEGE OF ENGINEERING DEPARTMENT OF CIVIL ENGINEERING. Question Bank. Sub. Code/Name: CE1303 Structural Analysis-I
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF CIVIL ENGINEERING Question Bank Sub. Code/Name: CE1303 Structura Anaysis-I Year: III Sem:V UNIT-I DEFLECTION OF DETERMINATE STRUCTURES 1.Why is it necessary to
More informationSTRUCTURAL ANALYSIS - I UNIT-I DEFLECTION OF DETERMINATE STRUCTURES
STRUCTURL NLYSIS - I UNIT-I DEFLECTION OF DETERMINTE STRUCTURES 1. Why is it necessary to compute defections in structures? Computation of defection of structures is necessary for the foowing reasons:
More informationDYNAMIC RESPONSE OF CIRCULAR FOOTINGS ON SATURATED POROELASTIC HALFSPACE
3 th Word Conference on Earthquake Engineering Vancouver, B.C., Canada August -6, 4 Paper No. 38 DYNAMIC RESPONSE OF CIRCULAR FOOTINGS ON SATURATED POROELASTIC HALFSPACE Bo JIN SUMMARY The dynamic responses
More information2.1. Cantilever The Hooke's law
.1. Cantiever.1.1 The Hooke's aw The cantiever is the most common sensor of the force interaction in atomic force microscopy. The atomic force microscope acquires any information about a surface because
More informationA PROCEDURE ON STUDYING A CRITICAL FORCE ON FEM AS PLASTIC DEFORMATIONS ARISE WITHIN STRAIGHT TRUSSES
11 th Nationa Congress on Theoretica and Appied Mechanics, -5 Sept. 009, Borovets, Bugaria A OCDU ON STUDYING A CITICAL FOC ON FM AS LASTIC DFOMATIONS AIS WITHIN STAIGHT TUSSS IVAN VAISILOV VSU L. Karaveov,
More informationTHE NUMERICAL EVALUATION OF THE LEVITATION FORCE IN A HYDROSTATIC BEARING WITH ALTERNATING POLES
THE NUMERICAL EVALUATION OF THE LEVITATION FORCE IN A HYDROSTATIC BEARING WITH ALTERNATING POLES MARIAN GRECONICI Key words: Magnetic iquid, Magnetic fied, 3D-FEM, Levitation, Force, Bearing. The magnetic
More informationPhysicsAndMathsTutor.com
. Two points A and B ie on a smooth horizonta tabe with AB = a. One end of a ight eastic spring, of natura ength a and moduus of easticity mg, is attached to A. The other end of the spring is attached
More informationStrain Energy in Linear Elastic Solids
Strain Energ in Linear Eastic Soids CEE L. Uncertaint, Design, and Optimiation Department of Civi and Environmenta Engineering Duke Universit Henri P. Gavin Spring, 5 Consider a force, F i, appied gradua
More informationHigh Efficiency Development of a Reciprocating Compressor by Clarification of Loss Generation in Bearings
Purdue University Purdue e-pubs Internationa Compressor Engineering Conference Schoo of Mechanica Engineering 2010 High Efficiency Deveopment of a Reciprocating Compressor by Carification of Loss Generation
More informationFinite element method for structural dynamic and stability analyses
Finite eement method for structura dynamic and stabiity anayses Modue-9 Structura stabiity anaysis Lecture-33 Dynamic anaysis of stabiity and anaysis of time varying systems Prof C S Manohar Department
More informationUnit 48: Structural Behaviour and Detailing for Construction. Deflection of Beams
Unit 48: Structura Behaviour and Detaiing for Construction 4.1 Introduction Defection of Beams This topic investigates the deformation of beams as the direct effect of that bending tendency, which affects
More informationEasticity. The strain produced in the stretched spring is ) Voume Strain ) Shearing Strain 3) Tensie Strain 4) None of the above. A body subjected to strain a number of times does not obey Hooke's aw due
More informationForces of Friction. through a viscous medium, there will be a resistance to the motion. and its environment
Forces of Friction When an object is in motion on a surface or through a viscous medium, there wi be a resistance to the motion This is due to the interactions between the object and its environment This
More informationVTU-NPTEL-NMEICT Project
MODUE-X -CONTINUOUS SYSTEM : APPROXIMATE METHOD VIBRATION ENGINEERING 14 VTU-NPTE-NMEICT Project Progress Report The Project on Deveopment of Remaining Three Quadrants to NPTE Phase-I under grant in aid
More information$, (2.1) n="# #. (2.2)
Chapter. Eectrostatic II Notes: Most of the materia presented in this chapter is taken from Jackson, Chap.,, and 4, and Di Bartoo, Chap... Mathematica Considerations.. The Fourier series and the Fourier
More informationGauss Law. 2. Gauss s Law: connects charge and field 3. Applications of Gauss s Law
Gauss Law 1. Review on 1) Couomb s Law (charge and force) 2) Eectric Fied (fied and force) 2. Gauss s Law: connects charge and fied 3. Appications of Gauss s Law Couomb s Law and Eectric Fied Couomb s
More informationAPPENDIX C FLEXING OF LENGTH BARS
Fexing of ength bars 83 APPENDIX C FLEXING OF LENGTH BARS C.1 FLEXING OF A LENGTH BAR DUE TO ITS OWN WEIGHT Any object ying in a horizonta pane wi sag under its own weight uness it is infinitey stiff or
More informationSlender Structures Load carrying principles
Sender Structures Load carrying principes Cabes and arches v018-1 ans Weeman 1 Content (preiminary schedue) Basic cases Extension, shear, torsion, cabe Bending (Euer-Bernoui) Combined systems - Parae systems
More informationPHYS 110B - HW #1 Fall 2005, Solutions by David Pace Equations referenced as Eq. # are from Griffiths Problem statements are paraphrased
PHYS 110B - HW #1 Fa 2005, Soutions by David Pace Equations referenced as Eq. # are from Griffiths Probem statements are paraphrased [1.] Probem 6.8 from Griffiths A ong cyinder has radius R and a magnetization
More informationSimple models for rope substructure mechanics: application to electro-mechanical lifts
Journa of Physics: Conference Series PAPER OPEN ACCESS Simpe modes for rope substructure mechanics: appication to eectro-mechanica ifts To cite this artice: I Herrera and S Kaczmarczyk 016 J. Phys.: Conf.
More informationExperimental Investigation and Numerical Analysis of New Multi-Ribbed Slab Structure
Experimenta Investigation and Numerica Anaysis of New Muti-Ribbed Sab Structure Jie TIAN Xi an University of Technoogy, China Wei HUANG Xi an University of Architecture & Technoogy, China Junong LU Xi
More information1D Heat Propagation Problems
Chapter 1 1D Heat Propagation Probems If the ambient space of the heat conduction has ony one dimension, the Fourier equation reduces to the foowing for an homogeneous body cρ T t = T λ 2 + Q, 1.1) x2
More informationNumerical simulation of javelin best throwing angle based on biomechanical model
ISSN : 0974-7435 Voume 8 Issue 8 Numerica simuation of javein best throwing ange based on biomechanica mode Xia Zeng*, Xiongwei Zuo Department of Physica Education, Changsha Medica University, Changsha
More information1 Equivalent SDOF Approach. Sri Tudjono 1,*, and Patria Kusumaningrum 2
MATEC Web of Conferences 159, 01005 (018) IJCAET & ISAMPE 017 https://doi.org/10.1051/matecconf/01815901005 Dynamic Response of RC Cantiever Beam by Equivaent Singe Degree of Freedom Method on Eastic Anaysis
More information12.2. Maxima and Minima. Introduction. Prerequisites. Learning Outcomes
Maima and Minima 1. Introduction In this Section we anayse curves in the oca neighbourhood of a stationary point and, from this anaysis, deduce necessary conditions satisfied by oca maima and oca minima.
More informationStrauss PDEs 2e: Section Exercise 1 Page 1 of 7
Strauss PDEs 2e: Section 4.3 - Exercise 1 Page 1 of 7 Exercise 1 Find the eigenvaues graphicay for the boundary conditions X(0) = 0, X () + ax() = 0. Assume that a 0. Soution The aim here is to determine
More informationStrauss PDEs 2e: Section Exercise 2 Page 1 of 12. For problem (1), complete the calculation of the series in case j(t) = 0 and h(t) = e t.
Strauss PDEs e: Section 5.6 - Exercise Page 1 of 1 Exercise For probem (1, compete the cacuation of the series in case j(t = and h(t = e t. Soution With j(t = and h(t = e t, probem (1 on page 147 becomes
More informationModule 22: Simple Harmonic Oscillation and Torque
Modue : Simpe Harmonic Osciation and Torque.1 Introduction We have aready used Newton s Second Law or Conservation of Energy to anayze systems ike the boc-spring system that osciate. We sha now use torque
More informationBP neural network-based sports performance prediction model applied research
Avaiabe onine www.jocpr.com Journa of Chemica and Pharmaceutica Research, 204, 6(7:93-936 Research Artice ISSN : 0975-7384 CODEN(USA : JCPRC5 BP neura networ-based sports performance prediction mode appied
More informationCantilever Beam Static and Dynamic Response Comparison with Mid-Point Bending for Thin MDF Composite Panels
Cantiever Beam Static and Dynamic Response Comparison with Mid-Point Bending for Thin MDF Composite Panes John F. Hunt, a, * Houjiang Zhang, b Zhiren Guo, b and Feng Fu c A new cantiever beam apparatus
More informationPhysics 111. Thursday, Dec. 9, 3-5pm and 7-9pm. Announcements. Tuesday, December 7, Stress Strain. For the rest of the semester
ics day, ember 7, 004 Ch 17: Kinetic Theory Stress Strain Ch 18: 1st Law of Thermodynamics nd Law of Thermodynamics or the rest of the semester Thursday,. 9, 3-5pm and 7-9pm Monday,. 13, 004 10:30 am 1:30
More informationAN INVESTIGATION ON SEISMIC ANALYSIS OF SHALLOW TUNEELS IN SOIL MEDIUM
The 4 th October -7, 8, Beijing, China AN INVESTIGATION ON SEISMIC ANALYSIS OF SHALLOW TUNEELS IN SOIL MEDIUM J. Boouri Bazaz and V. Besharat Assistant Professor, Dept. of Civi Engineering, Ferdowsi University,
More informationFirst-Order Corrections to Gutzwiller s Trace Formula for Systems with Discrete Symmetries
c 26 Noninear Phenomena in Compex Systems First-Order Corrections to Gutzwier s Trace Formua for Systems with Discrete Symmetries Hoger Cartarius, Jörg Main, and Günter Wunner Institut für Theoretische
More information1 Equations of Motion 3: Equivalent System Method
8 Mechanica Vibrations Equations of Motion : Equivaent System Method In systems in which masses are joined by rigid ins, evers, or gears and in some distributed systems, various springs, dampers, and masses
More informationThe Bending of Rectangular Deep Beams with Fixed at Both Ends under Uniform Load
Engineering,,, 8-9 doi:.6/eng..7 Pubised Onine December (ttp://.scirp.org/journa/eng) Te Bending of Rectanguar Deep Beams it Fied at Bot Ends under Uniform Load Abstract Ying-Jie Cen, Bao-Lian Fu, Gang
More informationSection 6: Magnetostatics
agnetic fieds in matter Section 6: agnetostatics In the previous sections we assumed that the current density J is a known function of coordinates. In the presence of matter this is not aways true. The
More informationPublished in: Proceedings of the Twenty Second Nordic Seminar on Computational Mechanics
Aaborg Universitet An Efficient Formuation of the Easto-pastic Constitutive Matrix on Yied Surface Corners Causen, Johan Christian; Andersen, Lars Vabbersgaard; Damkide, Lars Pubished in: Proceedings of
More informationThe linearization of mooring load distribution problem
Scientific Journas of the aritime University of Szczecin Zeszyty Naukowe Akademii orskiej w Szczecinie 16, 46 (118), 9 16 ISSN 1733-867 (Printed) Received: 31.8.15 ISSN 39-378 (Onine) Accepted: 1.3.16
More information(1) Class Test Solution (STRUCTURE) Answer key. 31. (d) 32. (b) 33. (b) IES MASTER. 34. (c) 35. (b) 36. (c) 37. (b) 38. (c) 39.
() ass Test Soution (STRUTUR) 7-09-07 nswer key. (b). (b). (c). (a) 5. (b) 6. (a) 7. (c) 8. (c) 9. (b) 0. (d). (c). (d). (d). (c) 5. (d) 6. (a) 7. (c) 8. (d) 9. (b) 0. (c). (a). (a). (b) (b) 5. (b) 6.
More informationIMPLEMENT OF VARIOUS MODELS The coordinate system of the wind-bridge interaction system for anaysis in a these modes is shown in Fig.. A unit-ength se
The Seventh Internationa Cooquium on Buff Body Aerodynamics and Appications (BBAA7) Shanghai, China; September -6, Comparison of various modeing schemes for bridge aerodynamics and aeroeasticity Teng Wu
More informationCOUPLED FLEXURAL TORSIONAL VIBRATION AND STABILITY ANALYSIS OF PRE-LOADED BEAMS USING CONVENTIONAL AND DYNAMIC FINITE ELEMENT METHODS
COUPLED FLEXURAL TORSIONAL VIBRATION AND STABILITY ANALYSIS OF PRE-LOADED BEAMS USING CONVENTIONAL AND DYNAMIC FINITE ELEMENT METHODS by Heenkenda Jayasinghe, B. Eng Aeronautica Engineering City University
More informationMath 124B January 31, 2012
Math 124B January 31, 212 Viktor Grigoryan 7 Inhomogeneous boundary vaue probems Having studied the theory of Fourier series, with which we successfuy soved boundary vaue probems for the homogeneous heat
More informationLECTURE 10. The world of pendula
LECTURE 0 The word of pendua For the next few ectures we are going to ook at the word of the pane penduum (Figure 0.). In a previous probem set we showed that we coud use the Euer- Lagrange method to derive
More informationNotes: Most of the material presented in this chapter is taken from Jackson, Chap. 2, 3, and 4, and Di Bartolo, Chap. 2. 2π nx i a. ( ) = G n.
Chapter. Eectrostatic II Notes: Most of the materia presented in this chapter is taken from Jackson, Chap.,, and 4, and Di Bartoo, Chap... Mathematica Considerations.. The Fourier series and the Fourier
More informationPhysics 235 Chapter 8. Chapter 8 Central-Force Motion
Physics 35 Chapter 8 Chapter 8 Centra-Force Motion In this Chapter we wi use the theory we have discussed in Chapter 6 and 7 and appy it to very important probems in physics, in which we study the motion
More informationT.C. Banwell, S. Galli. {bct, Telcordia Technologies, Inc., 445 South Street, Morristown, NJ 07960, USA
ON THE SYMMETRY OF THE POWER INE CHANNE T.C. Banwe, S. Gai {bct, sgai}@research.tecordia.com Tecordia Technoogies, Inc., 445 South Street, Morristown, NJ 07960, USA Abstract The indoor power ine network
More informationApplication of the Finite Fourier Sine Transform Method for the Flexural-Torsional Buckling Analysis of Thin-Walled Columns
IOSR Journa of Mechanica and Civi Engineering (IOSR-JMCE) e-issn: 78-1684,p-ISSN: 3-334X, Voume 14, Issue Ver. I (Mar. - Apr. 17), PP 51-6 www.iosrjournas.org Appication of the Finite Fourier Sine Transform
More informationSTABILITY ANALYSIS FOR 3D FRAMES USING MIXED COROTATIONAL FORMULATION
SDSS Rio 200 STABIITY AND DUCTIITY OF STEE STRUCTURES E. Batista, P. Veasco,. de ima (Eds.) Rio de Janeiro, Brazi, September 8-0, 200 STABIITY ANAYSIS FOR 3D FRAMES USING MIXED COROTATIONA FORMUATION Rabe
More informationUNCOMPLICATED TORSION AND BENDING THEORIES FOR MICROPOLAR ELASTIC BEAMS
11th Word Congress on Computationa Mechanics WCCM XI 5th European Conference on Computationa Mechanics ECCM V 6th European Conference on Computationa Fuid Dynamics ECFD VI E. Oñate J. Oiver and. Huerta
More informationTransverse Anisotropy in Softwoods
Transverse Anisotropy in Softwoods Modeing and Experiments CARL MODÉN Licenciate Thesis Stockhom, Sweden 2006 TRITA-AVE 2006:30 ISSN 1651-7660 ISBN 91-7178-385-7 KTH Engineering Sciences Department of
More informationAcoustic Nondestructive Testing and Measurement of Tension for Steel Reinforcing Members
Acoustic Nondestructive Testing and Measurement of Tension for Stee Reinforcing Members Part 1 Theory by Michae K. McInerney PURPOSE: This Coasta and Hydrauics Engineering Technica Note (CHETN) describes
More informationRelated Topics Maxwell s equations, electrical eddy field, magnetic field of coils, coil, magnetic flux, induced voltage
Magnetic induction TEP Reated Topics Maxwe s equations, eectrica eddy fied, magnetic fied of cois, coi, magnetic fux, induced votage Principe A magnetic fied of variabe frequency and varying strength is
More informationFRST Multivariate Statistics. Multivariate Discriminant Analysis (MDA)
1 FRST 531 -- Mutivariate Statistics Mutivariate Discriminant Anaysis (MDA) Purpose: 1. To predict which group (Y) an observation beongs to based on the characteristics of p predictor (X) variabes, using
More informationPHYSICS LOCUS / / d dt. ( vi) mass, m moment of inertia, I. ( ix) linear momentum, p Angular momentum, l p mv l I
6 n terms of moment of inertia, equation (7.8) can be written as The vector form of the above equation is...(7.9 a)...(7.9 b) The anguar acceeration produced is aong the direction of appied externa torque.
More informationNumerical Simulation for Optimizing Temperature Gradients during Single Crystal Casting Process
ISIJ Internationa Vo 54 (2014) No 2 pp 254 258 Numerica Simuation for Optimizing Temperature Gradients during Singe Crysta Casting Process Aeksandr Aeksandrovich INOZEMTSEV 1) Aeksandra Sergeevna DUBROVSKAYA
More informationFOURIER SERIES ON ANY INTERVAL
FOURIER SERIES ON ANY INTERVAL Overview We have spent considerabe time earning how to compute Fourier series for functions that have a period of 2p on the interva (-p,p). We have aso seen how Fourier series
More informationAn X, Gosling PD, Zhou X. Analytical structural reliability analysis of a suspended cable. Structural Safety 2016, 58,
An X, Gosing PD, Zhou X. Anaytica structura reiabiity anaysis o a suspended cabe. Structura Saety 2016, 58, 20-30. Copyright: 2015 Esevier. This manuscript version is made avaiabe under the CC-BY-NC-ND
More informationHYDROGEN ATOM SELECTION RULES TRANSITION RATES
DOING PHYSICS WITH MATLAB QUANTUM PHYSICS Ian Cooper Schoo of Physics, University of Sydney ian.cooper@sydney.edu.au HYDROGEN ATOM SELECTION RULES TRANSITION RATES DOWNLOAD DIRECTORY FOR MATLAB SCRIPTS
More informationTheory and implementation behind: Universal surface creation - smallest unitcell
Teory and impementation beind: Universa surface creation - smaest unitce Bjare Brin Buus, Jaob Howat & Tomas Bigaard September 15, 218 1 Construction of surface sabs Te aim for tis part of te project is
More informationComplete Solution of Elastica for a Clamped-Hinged Beam, and its Applications to a Carbon Nanotube
LM-5K5 January 6, 5 Compete Soution of Eastica for a Camped-Hinged Beam, and its Appications to a Carbon Nanotube Y Mikata NOTICE This report was prepared as an account of work sponsored by the United
More informationMA 201: Partial Differential Equations Lecture - 10
MA 201: Partia Differentia Equations Lecture - 10 Separation of Variabes, One dimensiona Wave Equation Initia Boundary Vaue Probem (IBVP) Reca: A physica probem governed by a PDE may contain both boundary
More informationSECTION A. Question 1
SECTION A Question 1 (a) In the usua notation derive the governing differentia equation of motion in free vibration for the singe degree of freedom system shown in Figure Q1(a) by using Newton's second
More informationDynamic Stability of an Axially Moving Sandwich Composite Web
Mechanics and Mechanica Engineering Vo. 7 No. 1 (2004) 53-68 c Technica University of Lodz Dynamic Stabiity of an Axiay Moving Sandwich Composite Web Krzysztof MARYNOWSKI Department of Dynamics of Machines
More informationIntroduction. Figure 1 W8LC Line Array, box and horn element. Highlighted section modelled.
imuation of the acoustic fied produced by cavities using the Boundary Eement Rayeigh Integra Method () and its appication to a horn oudspeaer. tephen Kirup East Lancashire Institute, Due treet, Bacburn,
More informationNumerical methods for PDEs FEM - abstract formulation, the Galerkin method
Patzhater für Bid, Bid auf Titefoie hinter das Logo einsetzen Numerica methods for PDEs FEM - abstract formuation, the Gaerkin method Dr. Noemi Friedman Contents of the course Fundamentas of functiona
More informationInternational Journal of Non-Linear Mechanics
nternationa Journa of Non-Linear Mechanics 43 (28) 551 -- 561 Contents ists avaiabe at ScienceDirect nternationa Journa of Non-Linear Mechanics journa homepage: www.esevier.com/ocate/nm Non-inear moda
More informationOptimum Design Method of Viscous Dampers in Building Frames Using Calibration Model
The 4 th Word Conference on Earthquake Engineering October -7, 8, Beijing, China Optimum Design Method of iscous Dampers in Buiding Frames sing Caibration Mode M. Yamakawa, Y. Nagano, Y. ee 3, K. etani
More informationDEVELOPMENT OF A ROTARY PNEUMATIC MUSCLE BASED ACTUATOR FOR ANTROPOMORPHIC JOINTS
DEVELOPMENT OF A OTAY PNEUMATIC MUSCLE BASED ACTUATO FO ANTOPOMOPHIC JOINTS S. Nahavandi and A.Z. Kouzani Schoo Engineering and Technoogy, Deain University, Austraia ABSTACT This paper outines the research
More informationSEMINAR 2. PENDULUMS. V = mgl cos θ. (2) L = T V = 1 2 ml2 θ2 + mgl cos θ, (3) d dt ml2 θ2 + mgl sin θ = 0, (4) θ + g l
Probem 7. Simpe Penduum SEMINAR. PENDULUMS A simpe penduum means a mass m suspended by a string weightess rigid rod of ength so that it can swing in a pane. The y-axis is directed down, x-axis is directed
More information(Refer Slide Time: 2:34) L C V
Microwave Integrated Circuits Professor Jayanta Mukherjee Department of Eectrica Engineering Indian Intitute of Technoogy Bombay Modue 1 Lecture No 2 Refection Coefficient, SWR, Smith Chart. Heo wecome
More informationMeasurement of acceleration due to gravity (g) by a compound pendulum
Measurement of acceeration due to gravity (g) by a compound penduum Aim: (i) To determine the acceeration due to gravity (g) by means of a compound penduum. (ii) To determine radius of gyration about an
More informationAnalysis of Cylindrical Tanks with Flat Bases by Moment Distribution Methods
May, 958 65 Anaysis of Cyindrica Tanks with Fat Bases by Moment Distribution Methods T. SyopSis by AminGhai, HE moment distribution method is used to find the moments and the ring tension in the was and
More informationEstimation of Lamina Stiffness and Strength of Quadriaxial Non-Crimp Fabric Composites Based on Semi-Laminar Considerations
appied sciences Artice Estimation of Lamina Stiffness and Strength of Quadriaxia Non-Crimp Fabric Composites Based on Semi-Laminar Considerations Yong Cao, Yunwen Feng *, Wenzhi Wang *, Danqing Wu and
More informationDeformations of statically determinate bar structures
Statics of Buiding Structures I., ERASMUS Deformations of staticay determinate bar structures Department of Structura Mechanics Facuty of Civi Engineering, VŠB-Technica University of Ostrava Outine of
More informationModal analysis of a multi-blade system undergoing rotational motion
Journa of Mechanica Science and Technoogy 3 (9) 5~58 Journa of Mechanica Science and Technoogy www.springerin.com/content/738-494x DOI.7/s6-9-43-3 Moda anaysis of a muti-bade system undergoing rotationa
More informationResearch on liquid sloshing performance in vane type tank under microgravity
IOP Conference Series: Materias Science and Engineering PAPER OPEN ACCESS Research on iquid soshing performance in vane type tan under microgravity Reated content - Numerica simuation of fuid fow in the
More informationVibrations of beams with a variable cross-section fixed on rotational rigid disks
1(13) 39 57 Vibrations of beams with a variabe cross-section fixed on rotationa rigid disks Abstract The work is focused on the probem of vibrating beams with a variabe cross-section fixed on a rotationa
More information