arxiv: v2 [nucl-th] 29 Sep 2011

Size: px

Start display at page:

Download "arxiv: v2 [nucl-th] 29 Sep 2011"

Rolf Roberts
6 years ago
Views:

1 Scissors Modes:The first overtone Keisuke Hatada 1,, Kuniko Hayakawa,, Fabrizio Palumbo 1 Instituto de Ciencia de Materiales de Aragón, CSIC-Universidad de Zaragoza, 59 Zaragoza, Spain, INFN Laboratori Nazionali di Frascati, c.p. 1, I-44 Frascati, Italy, Centro Fermi, Compendio Viminale, Roma I-184, Italy Dated: December 1, 1 arxiv: v [nucl-th] 9 Sep 11 Scissors modes were predicted in the framework of the Two-Rotor Model. This model has an intrinsic harmonic spectrum, so that the level above the Scissors Mode, the first overtone, has excitation energy twice that of the Scissors Mode. Since the latter is of the order of MeV in the rare earth region, the energy of the overtone is below threshold for nucleon emission, and its width should remain small enough for the overtone to be observable. We find that BE overtone= 64θ BE scissors, θ is the zero-point oscillation amplitude, which in the rare earth region is of order 1 1. PACS numbers: 4..Cz,4.Gd,71.7.Ch The Scissors Mode has an excitation energy of the order of MeV in the rare earth region [1,]. The model which led to its prediction, the Two-Rotor Model [], has the spectrum of a planar harmonic oscillator, with some constraints on the states to be discussed below. The first overtone should then have an energy of the order of 6MeV, below threshold for nucleon emission. As a consequence its width should remain of purely electromagnetic nature, and be small enough for this mode to be observable, even though Scissors Modes have a modest collectivity and are substantially fragmented [1,]. The possible occurrence of the first overtone has been considered in Ref.[4], but to our knowledge has not been thoroughly investigated so far. The main reason is perhaps that its excitation amplitude is expected to be too small. Indeed excitation amplitudes in the Two-Rotor Model are proportional to powers of θ, the amplitude of the zero point oscillation, which in the rare earth region is of order 1 1. Now BM1 scissors 1/θ, but BE scissors θ, and the first overtone needs to be excited by an E multipole. All other methods used in the study of Scissors Modes, the schematic Random Phase Approximation [5], the Interacting Boson model [6], the sum rule method [7] and a geometrical model [8] give similar results. The proportionality BM1 scissors BE scissors has been observed experimentally [9] even though BM1 scissors in reality scales as δ instead of δ as predicted by the Two-Rotor Model if the dependence of the moment of inertia on the deformation parameter of Ref.[1] is adopted. This is regarded as a significant evidence of the Scissors nature of the low lying magnetic transitions and their collectivity. We expect that such a proportionality should hold for the E strength of excitation of the first overtone as well. Even if this strength were small, its study might contribute to a deeper assessment of the nature and collectivity of the Scissors Modes. We then decided to start an investigation of the overtone in the Two-Rotor Model, because this model allows a first insight into the relevant dynamics in a simple framework. We thus came to the surprising result that BE overtone is of zero order in the expansion with respect to θ, and precisely BE overtone = 64θ BE scissors. 1 Inview ofthe smallnessofθ, this amplitudeis quitesubstantial. The above result might be relevant to some of the other electrically charged systems for which Scissors Modes have been predicted: metal clusters [11], quantum dots [1] and, in particular crystals [1], for which an expansion in powers of θ holds. In all these systems one of the blades of the scissors must be identified with a moving cloud of particles electrons in metal clusters and quantum dots, an atom in a cell in crystals and the other one with a structure at rest, the lattice. In order to make the paper self contained we report the main features of the Two-Rotor Model. Its classical hamiltonian is H = 1 I n I n + 1 I p I p +V I n, I p,i n,i p arethe angularmomenta andthe moments of inertia of the neutron and proton bodies assumed to have ellipsoidal shape and V their interaction potential. Introducing the total angular momentum I and the vector S I = I n + I p, S = In I p the hamiltonian can be rewritten as the sum of the rotational hamiltonian of the nucleus as a whole plus the hamiltonian of the intrinsic motion H = I I +H intr 4

2 I = 4I pi n I p +I n 5 sx is the step function: sx = 1, x > and zero otherwise. They are obtained from each other by the reflection of θ with respect to π/4. It is convenient to introduce the notation H intr = 1 I S + I n I p 4I n I p I S +V. 6 We assume the potential to depend only on the angle θ between the symmetry axes ˆζ n, ˆζ p of the rotors cosθ = ˆζ n ˆζ p. 7 It is therefore convenient to introduce this variable together with a set of other variables which identify the axes ˆζ n, ˆζ p. We chose the Euler angles α,β,γ of the intrinsic frame defined by ˆξ = ˆζ n ˆζ p sinθ, ˆη = ˆζ n ˆζ p sinθ, ˆζ = ˆζn + ˆζ p cosθ. 8 The correspondence ˆζn, ˆζ p α,β,γ,θ is one-to-one and regular for < θ < π/. These variables are not sufficient to describe all the configurations of the classical system, but describe uniquely the quantum system owing to the constraint I n ˆζ n = I p ˆζ p = 9 appropriate to quantum bodies with axial symmetry. These constraints are automatically satisfied if the wave functions depend on ˆζ n, ˆζ p only. Quantization can be obtained assuming the standard representation for the total angular momentum I, and for S the realization S ξ = i θ, S η = cotθi ζ, S ζ = sinθi η 1 I ξ,i η and I ζ are the components of the total angular momentum on the intrinsic axes. The Two-Rotor Model was reformulated [14] adopting a more appropriate quantization procedure, and including the realistic case in which the neutron rotor is bigger than that of protons. The resulting intrinsic hamiltonian is H intr = 1 I [ d dθ cotθ d dθ +cot θiζ ] [ + tan θiη + I n I p tanθi ζ I η cotθi η I ζ 4I p I n ] d + ii ξ +Vθ. 11 dθ R θ fθ = f θ 1 π f θ = f θ, 14 so that s I = s II. We assume V= V, as appropriate to the geometry of the system. Since we know that the angle between the neutron-proton axes is very small we can assume for the potential a quadratic approximation V = 1 Cθ x s I + 1 Cθ y s II 15 θ = IC 1 4, x = θ θ, y = π θ θ. 16 The intrinsic hamiltonian is then invariant with respect to the transformation π R = R ξ R θ 17 R ξ is the rotation operator around the ξ-axis, so that we can study the eigenvalue equation separately in the regions I,II. The linear derivative in the first term can be eliminated by the transformation UΦθ = 1 sinθ Φ θ. 18 Neglecting terms of order θ 1 we get [ H intr = UH intru 1 = 1 d I dθ +cot θ ] + cot θi ζ +tan θi η We then write accordingly, setting h = 1 H I = 1 ω [ d +Vθ. 19 H intr H Is I +H II s II dx + 1 x H II = 1 [ ω d dy + 1 y Iζ 1 ] +x 4 Iη 1 ] +y 4 1 We separate the range of θ in two regions π π s I = sθs 4 θ, s II = s θ s θ π 4, 1 with ω = C I.

3 The eigenfunctions and eigenvalues of H I are [14] n! ϕ Kn x = x K+1 L K n+k!θ n x e 1 x ǫ nk = ωn+k L K n are Laguerre polynomials and the wave functions ϕ are normalized according to dx ϕ Kn x = 1. 5 Even if the nucleus in its ground state has axial symmetry, this symmetry is in general lost in excited states, so that the component of angular momentum along any intrinsic axis is not conserved, resulting in a superposition of intrinsic states with different K-quantum number. The only states which have been theoretically analyzed so far are not affected by K-mixing. They are the ground state, I = K = n =, the Scissors Modes, I = 1,,K = 1,n =, and the state I = K =,n = 1, which cannot be excited by electromagnetic radiation. The total wavefunctions must respect the r-symmetry with respect to both the neutron and proton axes: configurations of the nucleus differing by independent rotations through π around the ξ- axis of the ζ n, ζ p vectors are indistinguishable. Enforcing this symmetry one finds two conditions [14]. The first has been solved in general, and requires that the wave functions have the form Ψ IMσ = K F J MKα,β,γΦ IKσ θ 6 FMK I J +1 = D J 81+δ K π MK + 1 J DM K J. 7 I,M are the nucleus angular momentum and its component on the z-axis of the laboratory system, and σ labels the states. We impose the normalization π π π π dα dβ dγ dθ Ψ IMσ = 1. 8 NoticethatthenormalizationoftheΦinEq.6isdifferent from that in Ref. [14]. The second condition coming from r-invariance constrains the parity of the intrinsic functions with respect to R θ and must be worked out state by state. ThegroundstateandtheScissorsModearelabelledby σ =, 1 respectively, and their intrinsic wave functions are Φ = ϕ s I + ϕ s II Φ 111 = ϕ 1 s I ϕ 1 s II. 9 Let us now study the first overtone, labelled by σ =. The hamiltonian H II couples states with K =,. It is then easy to see that the total eigenfunction must involve a superposition of ϕ 1 and ϕ. These states are degenerate and decoupled in region I. In order to find which superposition is an eigenfunction of the total hamiltonian we diagonalize I η Iη G M =, G M = 1 FM + FM, Iη G M = 4G M, G M = 1 F M FM. The total eigenfunction must then be an appropriate superposition of G M ϕ1,g M ϕ in region II and of F M ϕ 1,F M ϕ in region I. It is easy to verify that the intrinsic wave functions which satisfy the constraints [14] of r-invariance are Φ = 1 [ ϕ 1 s I 1 ] ϕ + ϕ 1 s II Φ = 1 [ ϕ s I + 1 ϕ ] ϕ 1 s II. 1 The different normalization of the Φ should be kept in mind in a comparison with Ref. [14]. The collective motion of the first overtone has a simple geometrical description in the intrinsic frame: in region I it is a superposition of the state ϕ 1, which is a kind of breathing mode, and of the state ϕ, which is a relative rotation of the neutron-proton axes as in the Scissors Mode but with angular momentum K =. We already mentioned that the spectrum of the Two-Rotor Model is identical to that of the planar harmonic oscillator. We remark however that the first and second excited states of the planar harmonic oscillator have degeneracy and respectively, while all the intrinsic states of the Two- Rotor Model discussed so far are non degenerate because of the r-symmetry. The surprisingfeature of our result is that the E excitation amplitude of the first overtone gets a nonvanishing contribution to zero order in the expansion with respect to θ. Indeed the quadrupole operator to this approximation is [14] ME,µ = eq [D µ s I 1 s II + 1 ] D µ +Dµ sii eq is quadrupole moment in the intrinsic frame. We immediately see that to zero order in θ we cannot excite the Scissors Modes from the ground state, but we can excite the first overtone, with the amplitude Ψ M ME,µ Ψ = 1 4 eq ϕ ϕ FM +FM D µ +Dµ D µ F.

4 4 Notice that this amplitude is entirely due to the K = component of the wave function, because ϕ 1 ϕ =. Finally Ψ M ME,µ Ψ = eq Cµ M Cµ M is a Clebsch-Gordan coefficient.we thus get Eq.1. While the first overtone cannot be excited by a M1 transition, it can decay to the Scissors Mode through such a transition to order θ. The E decay to the Scissors Mode can instead only occur to order θ and will be neglected. After the excitation of the first overtone one should then observe photons of energy ω and ω as well. Let us then evaluate the MM1 transition amplitude. The magnetic dipole moment in the intrinsic frame is MM1,ν = e m 4π S ν. 4 Then in the laboratory frame we have MM1,ν = 1 D 1 ν1 D 1 ν 1 M s I s II d dθ 5 M = i 16π g e p g n 6 m p g n,g p being the orbital gyromagneticfactors of neutrons, protonsrespectively and m p is the protonmass. We need an approximate expression of the derivative operator in regions I and II Setting θ U d dθ U 1 d dx 1, in region I x θ U d dθ U 1 d dy + 1, in region II. 7 y θ = d dθ 1 θ 8 by a straightforward calculation we get Ψ IM MM1,ν Ψ 1M11 = π MT 9 T = F M F 1 ν1 F 1 M 11 ϕ 1 ϕ θ ϕ 1 + F M F1 ν1 F1 M 11 ϕ ϕ 1 θ ϕ 1.4 At variance with the E excitation of the first overtone both intrinsic components K =,n = 1 and K =,n = contribute to this decay amplitude. We thus find + Ψ IM MM1,ν Ψ 1M11 = C M 1M 1θ 11ν M, 41 and we can finally relate the M1 decay strength of the overtone to the Scissors mode with the M1 strength of the Scissors Mode excitation BM1;overtone scissors 1 4 BM1 scissors. 4 A distinctive feature of the overtone in the Two-Rotor Model is the mixing of intrinsic states with different K- quantum number, which is necessary to respect the r- symmetry. This mixing is determined by the different form that the intrinsic hamiltonian takes in regions I and II. It would be very interesting to investigate if the approches [5],[6],[7],[8], will confirm the structure of the overtone we found in the Two-Rotor Model. Indeed so far microscopic calculations, while reproducing some experimental features as fragmentation, which are outside the possibility of a semiclassical model, agree with the Two- Rotor Model about the nature of the Scissors Modes. In particular the Interacting Boson Model, in the semiclassical approximation obtained using coherent states, exactly reproduces [15] the hamiltonian of the Two-Rotor Model in region I. We would be very surprised if the agreement would not extend to region II, and we think it would be very interesting to know the exact results for the overtone in the Interacting Boson Model. 1 D. Bohle, A. Richter, W. Steffen, A. E. L. Dieperink, N. Lo Iudice, F. Palumbo and O. Scholten, Phys. Lett. B 17, J. Enders, H. Kaiser, P. von Neumann-Cosel, C. Rangacharyulu and A. Richter, Phys. Rev. C 59, R ; N. Lo Iudice, Rivista Nuovo Cim., 1 ; K. Heyde, P. von Neumann-Cose and A. Richter, Rev. Mod. Phys N. Lo Iudice and F. Palumbo, Phys. Rev. Lett. 41, Y. Sun, C. Wu, K. Bahatt and M. Guidry, Nucl. Phys. A7 1 5 T. Suzuki and D. W. Rowe, Nucl. phys. A The reader interested in the chronology should see the end of Section 4 of this reference and Ref. of Ref. []. 6 F. Iachello, Nucl. Phys. A c 7 E. Lipparini and S. Stringari, Phys. Lett. B S. G. Rohozinski and W. Greiner, Z. Phys. A C. Rangacharyulu, A. Richter, H. J. Wörtche, W. Ziegler

5 5 and R. F. Casten, Phys. Rev. C R949 1 N. LoIudice, F. Palumbo, A. Richter and H. J. Wörtche, Phys. Rev. C E. Lipparini and S. Stringari, Phys. Rev. Lett. 6, ; H. Portales, E. Duval, and L. Saviot, M. Fujii, M. Sumitomo and S. Hayashi, Phys. Rev. B 6, Ll. Serra, A. Puente, and E. Lipparini, Phys. Rev. B 6, R K. Hatada, K. Hayakawa and F. Palumbo, Phys. Rev. B 71, G. De Franceschi, F.Palumbo and N. LoIudice, Phys. Rev. C A. E. L. Dieperink, Prog. Part. Nucl. Phys

arxiv:cond-mat/ v3 [cond-mat.other] 10 Jan 2005

arxiv:cond-mat/ v3 [cond-mat.other] 10 Jan 2005 Scissors Mode and dichroism in an anisotropic crystal arxiv:cond-mat/419v [cond-mat.other] 1 Jan Keisuke Hatada 1, Kuniko Hayakawa 1,, Fabrizio Palumbo 1 1 INFN Laboratori Nazionali di Frascati, c.p. 1,