Controllable circular Airy beams via dynamic linear potential

Transcription

1 Controllable circular Airy beams via dynamic linear potential Hua Zhong, Yiqi Zhang,, Milivoj R. Belić,,3 Changbiao Li, Feng Wen, Zhaoyang Zhang, and Yanpeng Zhang, Key Laboratory for Physical Electronics and Devices of the Ministry of Education & Shaani Key Lab of Information Photonic Technique, Xi an Jiaotong University, Xi an 79, China Science Program, Teas A&M University at Qatar, P.O. Bo 387 Doha, Qatar 3 milivoj.belic@qatar.tamu.edu yphang@mail.jtu.edu.cn hangyiqi@mail.jtu.edu.cn Abstract: We investigate controllable spatial modulation of circular autofocusing Airy beams, under action of different dynamic linear potentials, both theoretically and numerically. We introduce a novel treatment method in which the circular Airy beam is represented as a superposition of narrow aimuthally-modulated one-dimensional Airy beams that can be analytically treated. The dynamic linear potentials are appropriately designed, so that the autofocusing effect can either be weakened or even eliminated when the linear potential eerts a pulling effect on the beam, or if the linear potential eerts a pushing effect, the autofocusing effect can be greatly strengthened. Numerical simulations agree with the theoretical results very well. 6 Optical Society of America OCIS codes: (7.385) Invariant optical fields; (35.55) Propagation. References and links. M. V. Berry and N. L. Balas, Nonspreading wave packets, Am. J. Phys. 7, 6 67 (979).. G. A. Siviloglou and D. N. Christodoulides, Accelerating finite energy Airy beams, Opt. Lett. 3, (7). 3. G. Siviloglou, J. Broky, A. Dogariu, and D. Christodoulides, Observation of accelerating Airy beams, Phys. Rev. Lett. 99, 39 (7).. J. Broky, G. A. Siviloglou, A. Dogariu, and D. N. Christodoulides, Self-healing properties of optical Airy beams, Opt. Epress 6, (8). 5. I. Kaminer, M. Segev, and D. N. Christodoulides, Self-accelerating self-trapped optical beams, Phys. Rev. Lett. 6, 393 (). 6. A. Lotti, D. Faccio, A. Couairon, D. G. Papaoglou, P. Panagiotopoulos, D. Abdollahpour, and S. Tortakis, Stationary nonlinear Airy beams, Phys. Rev. A 8, 87 (). 7. I. Dolev, I. Kaminer, A. Shapira, M. Segev, and A. Arie, Eperimental observation of self-accelerating beams in quadratic nonlinear media, Phys. Rev. Lett. 8, 393 (). 8. Y. Q. Zhang, M. Belić, Z. K. Wu, H. B. Zheng, K. Q. Lu, Y. Y. Li, and Y. P. Zhang, Soliton pair generation in the interactions of Airy and nonlinear accelerating beams, Opt. Lett. 38, (3). 9. Y. Q. Zhang, M. R. Belić, H. B. Zheng, H. X. Chen, C. B. Li, Y. Y. Li, and Y. P. Zhang, Interactions of Airy beams, nonlinear accelerating beams, and induced solitons in Kerr and saturable nonlinear media, Opt. Epress, ().. M. Shen, J. Gao, and L. Ge, Solitons shedding from airy beams and bound states of breathing Airy solitons in nonlocal nonlinear media, Sci. Rep. 5, 98 (5). 6 OSA Apr 6 Vol., No. 7 DOI:.36/OE..795 OPTICS EXPRESS 795

2 . F. Diebel, B. M. Bokić, D. V. Timotijević, D. M. J. Savić, and C. Den, Soliton formation by decelerating interacting Airy beams, Opt. Epress 3, (5).. N. K. Efremidis, V. Paltoglou, and W. von Kliting, Accelerating and abruptly autofocusing matter waves, Phys. Rev. A 87, 3637 (3). 3. A. Salandrino and D. N. Christodoulides, Airy plasmon: a nondiffracting surface wave, Opt. Lett. 35, 8 8 ().. P. Zhang, S. Wang, Y. Liu, X. Yin, C. Lu, Z. Chen, and X. Zhang, Plasmonic Airy beams with dynamically controlled trajectories, Opt. Lett. 36, (). 5. A. Minovich, A. E. Klein, N. Janunts, T. Pertsch, D. N. Neshev, and Y. S. Kivshar, Generation and near-field imaging of Airy surface plasmons, Phys. Rev. Lett. 7, 68 (). 6. L. Li, T. Li, S. M. Wang, C. Zhang, and S. N. Zhu, Plasmonic Airy beam generated by in-plane diffraction, Phys. Rev. Lett. 7, 68 (). 7. Y. Hu, M. Li, D. Bongiovanni, M. Clerici, J. Yao, Z. Chen, J. Aaña, and R. Morandotti, Spectrum to distance mapping via nonlinear Airy pulses, Opt. Lett. 38, (3). 8. R. Driben, Y. Hu, Z. Chen, B. A. Malomed, and R. Morandotti, Inversion and tight focusing of Airy pulses under the action of third-order dispersion, Opt. Lett. 38, 99 5 (3). 9. L. Zhang, K. Liu, H. Zhong, J. Zhang, Y. Li, and D. Fan, Effect of initial frequency chirp on Airy pulse propagation in an optical fiber, Opt. Epress 3, (5).. Y. Hu, A. Tehranchi, S. Wabnit, R. Kashyap, Z. Chen, and R. Morandotti, Improved intrapulse Raman scattering control via asymmetric Airy pulses, Phys. Rev. Lett., 739 (5).. M. A. Bandres and J. C. Gutiérre-Vega, Airy-Gauss beams and their transformation by paraial optical systems, Opt. Epress 5, (7).. Y. Q. Zhang, M. R. Belić, L. Zhang, W. P. Zhong, D. Y. Zhu, R. M. Wang, and Y. P. Zhang, Periodic inversion and phase transition of finite energy Airy beams in a medium with parabolic potential, Opt. Epress 3, 67 8 (5). 3. Y. Q. Zhang, X. Liu, M. R. Belić, W. P. Zhong, M. S. Petrović, and Y. P. Zhang, Automatic Fourier transform and self-fourier beams due to parabolic potential, Ann. Phys. 363, (5).. W. Liu, D. N. Neshev, I. V. Shadrivov, A. E. Miroshnichenko, and Y. S. Kivshar, Plasmonic Airy beam manipulation in linear optical potentials, Opt. Lett. 36, 6 66 (). 5. N. K. Efremidis, Airy trajectory engineering in dynamic linear inde potentials, Opt. Lett. 36, (). 6. Y. Hu, G. A. Siviloglou, P. Zhang, N. K. Efremidis, D. N. Christodoulides, and Z. Chen, Self-accelerating Airy beams: Generation, control, and applications, in Nonlinear Photonics and Novel Optical Phenomena, Z. Chen and R. Morandotti, eds. (Springer, ), pp Z. Zhang, Y. Hu, J. Y. Zhao, P. Zhang, and Z. G. Chen, Research progress and application prospect of Airy beams, Chin. Sci. Bull. 58, (3). 8. M. A. Bandres, I. Kaminer, M. Mills, B. M. Rodrigue-Lara, E. Greenfield, M. Segev, and D. N. Christodoulides, Accelerating optical beams, Opt. Photonics News, 3 37 (3). 9. N. K. Efremidis and D. N. Christodoulides, Abruptly autofocusing waves, Opt. Lett. 35, 5 7 (). 3. D. G. Papaoglou, N. K. Efremidis, D. N. Christodoulides, and S. Tortakis, Observation of abruptly autofocusing waves, Opt. Lett. 36, 8 8 (). 3. I. Chremmos, N. K. Efremidis, and D. N. Christodoulides, Pre-engineered abruptly autofocusing beams, Opt. Lett. 36, (). 3. R.-S. Penciu, K. G. Makris, and N. K. Efremidis, Nonparaial abruptly autofocusing beams, Opt. Lett., 5 (6). 33. P. Zhang, J. Prakash, Z. Zhang, M. S. Mills, N. K. Efremidis, D. N. Christodoulides, and Z. Chen, Trapping and guiding microparticles with morphing autofocusing Airy beams, Opt. Lett. 36, (). 3. P. Li, S. Liu, T. Peng, G. Xie, X. Gan, and J. Zhao, Spiral autofocusing Airy beams carrying power-eponentphase vortices, Opt. Epress, (). 35. I. Chremmos, P. Zhang, J. Prakash, N. K. Efremidis, D. N. Christodoulides, and Z. Chen, Fourier-space generation of abruptly autofocusing beams and optical bottle beams, Opt. Lett. 36, (). 36. P. Panagiotopoulos, D. G. Papaoglou, A. Couairon, and S. Tortakis, Sharply autofocused ring-airy beams transforming into non-linear intense light bullets, Nat. Commun., 6 (3). 37. C.-Y. Hwang, K. Y. Kim, and B. Lee, Dynamic control of circular Airy beams with linear optical potentials, IEEE Photonics J., 7 8 (). 38. I. D. Chremmos, Z. Chen, D. N. Christodoulides, and N. K. Efremidis, Abruptly autofocusing and autodefocusing optical beams with arbitrary caustics, Phys. Rev. A 85, 388 (). 39. Y. Q. Zhang, X. Liu, M. R. Belić, W. P. Zhong, F. Wen, and Y. P. Zhang, Anharmonic propagation of twodimensional beams carrying orbital angular momentum in a harmonic potential, Opt. Lett., (5).. Y. Q. Zhang, X. Liu, M. R. Belić, W. P. Zhong, Y. P. Zhang, and M. Xiao, Propagation dynamics of a light beam in a fractional Schrödinger equation, Phys. Rev. Lett. 5, 83 (5). 6 OSA Apr 6 Vol., No. 7 DOI:.36/OE..795 OPTICS EXPRESS 796

3 . Z. Zhang, J.-J. Liu, P. Zhang, P.-G. Ni, J. Prakash, Y. Hu, D.-S. Jiang, D. N. Christodoulides, and Z.-G. Chen, Generation of autofocusing beams with multi-airy beams, Acta Phys. Sin. 6, 39 (3).. C.-Y. Hwang, K.-Y. Kim, and B. Lee, Bessel-like beam generation by superposing multiple Airy beams, Opt. Epress 9, ().. Introduction In quantum mechanics, the Airy function has been shown to be a solution of the potentialfree Schrödinger equation []. Since the Airy wave function is not a realistic physical quantity, due to its infinite energy, the investigation of Airy wavepackets in physics did not attract much attention until the introduction of finite-energy Airy beams in optics [, 3]. Such beams possess interesting and useful self-accelerating, self-healing [] and nondiffracting properties. Hence, in the past decade topics related with Airy beams received intense attention. Thus far, investigations of Airy beams have been reported in nonlinear media [5 ], Bose-Einstein condensates [], on the surface of a metal [3 6], optical fibers [7 ], and other systems. To manipulate the propagation of Airy beams, eternal potentials such as harmonic [ 3] or a linear potenial [, 5], have been introduced. For more details, the reader may consult review articles [6 8] and references therein. On the other hand, in more than one dimension the circular Airy (CAi) beams, as radially symmetric beams that possess autofocusing property [9 3], have stirred wide interest in the past few years. It has been demonstrated that CAi beams can be used to trap and guide microparticles [33,3] and even to produce the so-called bottle beams [35] and light bullets [36]. Similar to the finite-energy Airy beams, CAi beams can also be controlled and manipulated by potentials [37 39]. Recent research has shown that the propagation trajectory as well as the position of autofocusing points of the CAi beam can be controlled by a dynamic linear potential [37]. However, for fuller understanding further investigation of CAi beams is required. Interesting questions remain unanswered. Can the layers of CAi beams be modulated during propagation? Can the autofocusing effect be weakened or maybe strengthened? We answer these questions in this article. Here, we introduce specific linear potentials and investigate the corresponding influence on the propagation of CAi beams. Since the linear potential is similar to a force in the classical mechanics [], it will pull or push the CAi beams during propagation. We give an analytical solution for a two-dimensional CAi beam propagating in the linear potential by an analogy to that for a one-dimensional finite-energy Airy beam, and then carry out numerical simulations to verify its validity. We find that the autofocusing can be strengthened when the linear potential plays a pushing role, while when it plays a pulling role, the autofocusing effect can be weakened or even eliminated. The setup of the article is as follows. In Sec., we introduce the theoretical model, and in Sec. 3, we present our theoretical and numerical results for different linear potentials. In Sec., different from Sec. 3 where an eponential apodiation is adopted, we briefly discuss the case with a Gaussian apodiation. We conclude the paper and display some etended discussions in Sec. 5.. Theoretical model The propagation dynamics of the CAi beam is described by the following Schrödinger equation: i dψ d + ( ψ + ) ψ y V (,y,)ψ =, () where ψ is the beam envelope, and y are the normalied transverse coordinates, and is the propagation distance, scaled by some characteristic transverse width and the correspond- 6 OSA Apr 6 Vol., No. 7 DOI:.36/OE..795 OPTICS EXPRESS 797

4 ing Rayleigh length k, respectively. Here, k = πn/λ is the wavenumber, n the inde of refraction, and λ the wavelength in free space. For our purposes, the values of parameters can be taken as = µm, and λ = 6nm. The eternal potential is chosen in a specific form V (,y,) = d()r/, where r = + y. Thus, it is linear in r, with the scaling factor d depending on the longitudinal coordinate. In this form, it is known as the dynamical linear potential [5, 37, 38]. In polar coordinates, Eq. () can be rewritten as i dψ d + ( ψ r + r ) ψ r In the (+)-dimensional limit, Eq. () can be written as d() rψ =. () i ψ + ψ d() ψ =, (3) which clearly is a linear potential. Without the absolute value sign on, Eq. (3) is the same as that treated in [5]. However, with the absolute value, one can manage this problem for > and < separately []. In Eq. () or Eq. (), we assume that the input beam is an inward CAi beam ψ(,y) = Ai(r r)ep[a(r r)], () where a is the decay parameter a positive real number that makes the total energy finite, and r is the initial radius of the main Airy ring. For our purpose, we assume r = 5; the corresponding intensity distribution of the input is shown in Fig. (a). We note that it is hard to find an analytical solution of Eq. () or Eq. () by the method developed in [5], because of the difficulty with the Fourier transform of the last term in Eq. () or the ero-order Hankel transform of the last term in Eq. (). Here, we develop an approimate but accurate method to solve this problem by introducing an aimuthal modulation of the CAi beam in Eq. (), ψ a (,y) = Ai(r r)ep[a(r r)]ep ( (θ θ ) w ), (5) with w being the width of the modulation, θ = arctan(y/) being the aimuthal angle, and θ indicating the modulation direction. In Fig., we depict some input possibilities. First, we set w =.5 and θ = ; the corresponding intensity is displayed in Fig. (b), which is a crescent-like structure with many layers. Clearly, the appearance of this structure is due to the aimuthal modulation. If the value of w is small enough, the aimuthal modulation will results in a very narrow structure, which is quite similar to a one-dimensional finite-energy Airy beam (vi. w ). In fact, one can use Dirac s delta fuction δ(θ θ ) = lim w ep ( (θ θ ) w ) {, θ = θ =, θ θ to transform the CAi beam in Eq. (5) into the one-dimensional finite-energy Airy beam. In Fig. (c), we show such a structure by choosing w =.5 and θ =. For the aimuthal modulation along other aimuthal angles, one can rotate the transverse aes and obtain the same case as for θ =, by using the rotation matri [ ] [ ][ ] p cosθ sinθ =, y p sinθ cosθ y 6 OSA Apr 6 Vol., No. 7 DOI:.36/OE..795 OPTICS EXPRESS 798

5 where p and y p are the coordinates after rotation. One can verify that the positive direction after rotation is overlapping with the aimuthal modulation along θ, because tan θ p = yp sin θ + y cos θ = tan(θ + θ ). = p cos θ y sin θ As a result, the CAi beam can be approimately viewed as an assembly of one-dimensional finite-energy Airy beams associated with the transformed coordinate p (which is the variable of the transformed Airy beam), of the form +π ψ(, y) = Ai(r p ) ep[a(r p )]. (6) θ = π In Fig. (d), we choose aimuthally modulated CAi beams along different angles, to mimic the initial CAi beam shown in Fig. (a). One can see that such an approimation makes sense. (a) (c) (b) (d) y Fig.. Input beam intensities. (a) An eample of finite-energy circular Airy beam. (b) An aimuthally-modulated circular Airy beam, with w =.5. (c) Same as (b), but with w =.5. (d) A combination of aimuthally modulated circular Airy beams along different aimuthal directions, according to Eq. (6). Other parameters: r = 5 and a =.. All the panels share the same variables and dimensions. Therefore, the description of the propagation of a CAi beam can be approimately reduced to the one-dimensional case [], i.e., to Eq. (3), which is a much simpler problem. Thus, the propagation of the CAi beam can be described by +π ψ(, y, ) = C Ai ia + f + (r p ) θ = π ep a f + (r p ) 3 ep i a + f f (r p )g + (r p ), 8 (7) by analogy to the one-dimensional case [5]. In Eq. (7), Z g() = d(t)dt, Z f () = f + and Z f () = #583 6 OSA g(t)dt, g (t)dt, Received 6 Jan 6; revised Mar 6; accepted 9 Mar 6; published 9 Mar 6 Apr 6 Vol., No. 7 DOI:.36/OE..795 OPTICS EXPRESS 799

6 where f is a constant that guarantees f ( = ) =. In addition, parameter C in Eq. (7) is a normaliation parameter, which makes a balance between the total intensity of components and the intensity of the CAi beam. According to Eq. (7), the trajectory of each component in a dynamic linear potential is p = r + f, (8) which is related to the type of the potential. In other words, the CAi beam can be effectively manipulated by the linear potential. It is clear that the accuracy of our approimation improves as the summation in Eq. (7) is performed over more terms. We stress the fact that the solution in Eq. (7) can be viewed as a superposition of infinitely many one-dimensional Airy beams from different directions, which is an etension of the work done in [9]. In addition, we also have to mention that the summation in Eq. (7) and the trajectory in Eq. (8) are somewhat rude approimations, because we omitted the absolute value sign in Eq. (3) in the analysis, so that the results for components displayed in Eqs. (7) and (8) will not be very accurate in case of collisions during propagation. However, such inaccuracy will be waived if the components do not collide with each other. If d(), Eq. () reduces to the Schrödinger equation in free space and the propagation of CAi beam according to such a model has already been reported [9]. Equation (7) can describe the autofocusing effect effectively. As a test, one can choose only two components with θ = and π to mimic the autofocusing effect, which is similar to Fig. in [9]. If there is no autofocusing during propagation, Eq. (7) can be rewritten as [ ( ψ(,y,) =Ai ia + f )] + (r r) [ ( ep a f )] + (r r) [ ( ep i a + f 8 f 3 (r r)g + )] (r r), (9) which is invalid when autofocusing happens. For accuracy, the focusing is now guided by the linear potential, and it is not an automatic behavior; that s why here (and from now on) we place the quotation marks on the word. But, to stress, autofocusing is adequately described by Eq. (7). In summary, our analysis is based on applying the aimuthal modulation to CAi beams; this novel treatment helps one reduce the two-dimensional problem into a simpler one-dimensional case. Using Eqs. (7) and (9), the propagation of a CAi beam manipulated by a dynamic linear potential can now be simply described. In the following, we investigate the influence of different potentials on Airy beams during propagation. 3. Results and discussions 3.. The case d() = According to Eq. (8), the trajectory of each component is p = r, () which is independent on the propagation distance, i.e., the sie of the ring of the CAi beam will not change during propagation. Actually, Eq. (3) with d() = has already been solved in [], in which the trajectory of the one-dimensional finite-energy Airy beam is a straight line. Since the beam will not focus during propagation, Eq. (9) can be used to describe the propagation. 6 OSA Apr 6 Vol., No. 7 DOI:.36/OE..795 OPTICS EXPRESS 75

7 The result is displayed in Fig., in which Fig. (a) is the analytical result according to Eq. (9), and Fig. (b) is the corresponding numerical simulation of Eq. (). Due to rotational symmetry of the CAi beam, we only ehibit the transverse intensity distribution along the ais (y = ) during propagation. One can see that the analytical and numerical results agree with each other very well. To elucidate propagation, we also present beam intensities obtained numerically at certain distances, as displayed in Figs. (c)-(c3). Indeed, the sie of the ring of the CAi beam remains the same during propagation, but the intensity dims. For this case, the linear potential eerts a pulling influence that can balance the virtual force which makes the beam focus. (a).. (b).. y 6 8 (c) = (c) =3 (c3) =6.. Fig.. (a) Analytical intensity distribution of a CAi beam during propagation in the plane at y =, according to Eq. (9), for d =. (b) Same as (a), but for numerical simulation. (c) Intensity profiles of CAi beam at different propagation distances (noted in each panel). Other parameters: r = 5 and a =.. All the panels in (c) share the same variables, dimensions, and color scales. 3.. The case d() = + π cos(π) For this case, the trajectory of each component can be written as p = r cos(π) +, () which is same as the one displayed in [5] with the period of, and the trajectory of the one-dimensional finite-energy Airy beam does not move across p =. So, there will be no autofocusing of the CAi beam, which means that the linear potential also eerts a pulling effect. As a result, the propagation for this case can still be described by Eq. (9). The corresponding result is ehibited in Fig. 3, the setup of which is the same as that of Fig.. Again, the analytical and numerical results agree with each other very well. 6 OSA Apr 6 Vol., No. 7 DOI:.36/OE..795 OPTICS EXPRESS 75

8 (a).. (b).. (c) (c) = 6 =3 8 (c3) =6 y.. Fig. 3. Same as Fig., but for d() = + π cos(π) The case d() = 3 According to Eq. (8), the trajectory for this case is p = r 3 + 3, () which indicates that the CAi beam will undergo autofocusing during propagation, so that the description of the propagation should be based on Eq. (7). In Fig. (a), the maimum of intensity during propagation is ehibited. In order to make a comparison, we take the same values for a as used in [9] and the same normalied intensity of the input. One can clearly see that the beam intensity decreases initially, but then increases to almost 5 after autofocusing, which is much higher than that without a potential. Undoubtedly, the potential eerts a strong pushing effect that strengthens the focusing. To show the pushing effect more clearly, we display the propagation of the components corresponding to θ = and θ = π in the inset in Fig. (a). It is evident that at first the two components tend to separate before the focusing point, but then they converge. The slope of the components at the colliding point is bigger than that without a potential, as in [9], which can be viewed that the components acquire a larger speed because of the pushing effect; hence, the autofocusing is strengthened. However, according to the propagation in the inset, one may doubt the accuracy of our analysis, because the intensity at the autofocusing point is not the largest. The eplanation is that one cannot use only two one-dimensional Airy beams to obtain the real physical picture of the propagation of the full CAi beam such an approimation is too poor. If another pair of components is added, the intensity at and only at the autofocusing point will be larger, due to the collision of four components. The intensity at the autofocusing point will reach an enormous value when numerous pairs of components are considered simultaneously; such a consideration can approimate the propagation of the CAi beam very well. Since the theoretical trajectories in Eq. (8) do not consider the absolute value sign in Eq. (3), the theoretical trajectories are only valid before collision occurs. #583 6 OSA Received 6 Jan 6; revised Mar 6; accepted 9 Mar 6; published 9 Mar 6 Apr 6 Vol., No. 7 DOI:.36/OE..795 OPTICS EXPRESS 75

9 Maimum of intensity (a) (b) 3 3 r 6 8 Fig.. (a) Maimum of the beam intensity during propagation for d() = 3 and r = 5. The maimum of the beam intensity at = is. Inset shows the propagation of the components corresponding to θ = and θ = π, and the corresponding theoretical trajectories. (b) The maimum of the beam intensity as a function of r and. The white dashed line corresponds to the curve in (a). The decay parameter is a =.5. Similar to the previous study [9], r also affects the maimum of the beam intensity (MBI) reached during propagation. To observe such a dependence more clearly, we show the change of the MBI as a function of both r and the propagation distance, as displayed in Fig. (b). One sees that the MBI first increases and then decreases with the increasing of r, and the MBI reaches a maimum around r = 5. In addition, one can also see that the location of MBI also changes with r. The reason is that the autofocusing effect requires a longer distance to establish itself when r increases. 3.. The case d() = H( )/ [( ) + 5]3/ The function H( ) here is the Heaviside step function, which demands, for ( ), H( ) =, for ( > ). Therefore, the trajectory for this case can be written as r, p p = r + ( ) + 5, for ( ), for ( > ). (3) Similar to the case in Sec. 3.3, the beam will autofocus during propagation, and we display the MBI for this case in Fig. 5. In Fig. 5(a), one finds that the MBI during propagation is about 6 times of the input. This value is much lower than that in [9], as well as of that in Sec From the inset in Fig. 5(a), one finds the reason easily the speed (slope) at the colliding point is smaller than that in [9], because of the pulling effect. Figure 5(b) shows the MBI as a function of r and, from which one can see that the peak of the MBI is still no more than 65, so the linear potential in this case eerts a pulling influence, which weakens the autofocusing effect. #583 6 OSA Received 6 Jan 6; revised Mar 6; accepted 9 Mar 6; published 9 Mar 6 Apr 6 Vol., No. 7 DOI:.36/OE..795 OPTICS EXPRESS 753

10 Maimum of intensity (a) 6 8 (b) r Fig. 5. Figure setup is as in Fig... Circular Airy beam with Gaussian apodiation By using a Gaussian apodiation, the CAi beam can also be made finite-energy, of the form ψ = Ai(r r)ep ( (r r) ), where w is related to the beam width of the Gaussian apodiation. Following the same procedure as before, the solution can be written as ψ(,y,) = σ +π ep θ = π { i w [ ( Ai (r p ) + f ) σ σ [ f 8 D (r p ) + σ ] [ ( ep σw (r p ) + f ( r p + f 6σ )] )]}, () where σ = + i/w. If there is no autofocusing during propagation, the solution in Eq. () can be directly rewritten as ψ(,y,) = [ Ai σ σ { ep i ( (r r) + f ) σ [ f 8 D (r r) + σ Clearly, the trajectory of each component can be written as p = r ] [ ( ep σw (r r) + f ( r r + f 6σ )] )]}. (5) w (w + ) + f, (6) which is not only related to the linear potential, but also to the beam width of the Gaussian apodiation. If the condition w is fulfilled (this condition can be relatively easily fulfilled 6 OSA Apr 6 Vol., No. 7 DOI:.36/OE..795 OPTICS EXPRESS 75

11 when the propagation distance is not too long), Eq. (6) will be reduced to Eq. (8); therefore, all the phenomena obtained in Sec. 3 can also be realied for Gaussian apodiation. In other words, the Gaussian-apodied CAi beams can also be well controlled and manipulated. However, one needs to bear in mind that such an apodiation introduces another degree of freedom in the beam manipulation. (a).. (b) Fig. 6. Same as Fig. (b), but for Gaussian apodiation with (a) w =, and (b) w = 5. The dashed curves represent the analytical trajectories. The panels share the same variables and dimensions. As an elucidation, in Fig. 6 we display the numerical simulations of a CAi beam with Gaussian apodiation in a dynamic linear potential that is used in Sec. 3.; the dashed curves show the corresponding analytical trajectories. One can find that, in comparison with the trajectory in Fig. 6(b), the trajectory in Fig. 6(a) is much more similar to that in Fig. (b), because the value of w in the latter case is bigger, which guarantees the validity of the condition w over a longer propagation distance. 5. Conclusion In summary, we have theoretically and numerically investigated the spatial guidance of CAi beams, by using different types of dynamic linear potentials. We find that the accelerating trajectory of the CAi beam can be controlled by the linear potential effectively. Such a manipulation may weaken (even eliminate) or strengthen the autofocusing effect of the CAi beam, depending on the form of the linear potential. Our results broaden the potential applications of CAi beams in trapping and manipulating microparticles, offering potential use in optics, biology, and other disciplines. Last but not least, we would like to point out that the analysis presented here can also be applied to the outward CAi beams [], but the validity is more limited, because the outward CAi beams always produce a focusing peak at the beam s center, which is not the case for the inward CAi beams if the linear potential is well chosen. As reported in [37], the manipulation on the autofocusing effect can be enriched if one launches the input beam appropriately (e.g., the incident angle), which is independent of the potential. Acknowledgment This work was supported by the 973 Program (CB98), KSTIT of Shaani province (KCT-), NSFC (78, 6385), and the NPRP project of the Qatar 6 OSA Apr 6 Vol., No. 7 DOI:.36/OE..795 OPTICS EXPRESS 755

12 National Research Fund (a member of the Qatar Foundation). MRB also acknowledges support by the Al Sraiya Holding Group. 6 OSA Apr 6 Vol., No. 7 DOI:.36/OE..795 OPTICS EXPRESS 756