ERASMUS COURSE CATALOGUE 2014/15 2 ND SEMESTER

Transcription

1 ERASMUS COURSE CATALOGUE 2014/15 2 ND SEMESTER

2 LIST OF CORE COURSES The Faculty of Mechanical Engineering of Szent István University is currently offering the below-listed core courses for the 2 nd semester of the 2014/15 academic year. Additional courses may be announced before the start of the semester, providing a wider range of courses to choose from. COURSE CODE COURSE NAME CREDIT SGMKLX05XXN Air Purity Protection 2 SGMETX02XXN Bases of energetics 2 SGMAGX01XXN Electrotechnics 3 SGMMGX01XMN Engineering Economics 4 SGMJHX38XXN Engines and Vehicles 4 SGMKLX24XXN Environmental Engineering 4 Technologies SGMMC3842C Ethics for Engineers 2 SGMMTX24XXN Food Quality Management 3 SGMIFX28XXN Informatics II. 3 SGMMA7809GN Partial Differential Equations 3 SGMFFX23XXN Physical Experiments 3 SGMFFX15XXN Process control 4 SGMFFX16XXN Solar Energy Application 3 2

3 AIR PURITY PROTECTION COURSE CODE: SGMKLX05XXN ECTS CREDITS: 2 TEACHING HOURS 2+0 Dr. András BÉRES beres.andras@mkk.szie.hu This module focuses on technological, technical and legal solutions for reducing air pollution. It presents an overview of air pollutant substances, their chemical properties, the various instruments used for pollutant isolation, the effects of pollution on the environment, while also examining aspects of the legal system relevant to containing air pollution. Under the framework of this module students will also acquire an understanding of emission and imission quantification techniques used for the study of air pollution. 3

4 BASES OF ENERGETICS COURSE CODE: SGMETX02XXN ECTS CREDITS: 2 TEACHING HOURS 2+0 Dr. László TÓTH toth.laszlo@gek.szie.hu Dr. László MÁTHÉ mathe.laszlo@gek.szie.hu In the frame of the subject, the technical knowledge in connection with the energy production and supply will be mainly reviewed such as the fundamental concepts of the energy production and supply, the dominant energy kinds and energy carriers (agents), primary and secondary energy carriers, energy transformers, electric drives as well as the main constructional units of the power-plant systems fuel preparatory plants, energy converters, heat exchangers, electric heaters, boilers etc. and the basic devices of renewable energy sources the basic units of renewable-power (biomass, solar, wind, geothermal) plants, their operation and technical properties. 4

5 ELECTROTECHNICS COURSE CODE: SGMAGX01XXN ECTS CREDITS: 3 TEACHING HOURS 2+1 Dr. Péter SEMBERY sembery.peter@gek.szie.hu After an overview of fundamentals of general electrotechnics, students will learn about electric machins. The level of the study suits to needs of mechanical engineer, don t deal with construction of electrical machines, only with their operate and maintenance. Topics of the course: Basic terms and definitions: Atoms and electricitiy, Electromotive force, Power and energy, Resistance and Ohm s law, Direct and alternating current, Amplitude of sine waves, Phase relations and power ina c cicuits, Vector representation of ac waveforms. Resistive networks: Circuits and circuits elements, Series and parallel networks, Combination series parallel networks. Inductance, capacitance and phase relations: Inductance and inductive reactance, Transformers, Capacitance and capacitative reactance, Combinations of inductance, capacitance and tesistance, Powerfactor improvement. Electric motors: AC motor principles, Single-phase motors, Threephase motors, Measurement of motor characteristics, Motor protection and control. Required literature: 1. Sembery P.: Electrotechnics, lecture notes, Gödöllő 5

6 ENGINEERING ECONOMICS COURSE CODE: SGMMGX01XMN ECTS CREDITS: 4 TEACHING HOURS 2 Dr Miklós DARÓCZI daroczi.miklos@gek.szie.hu The main chapters of the course: fundamentals of engineering economics, cost terminology, breakeven analysis, depreciation, money and time relationships, purchasing and financing alternatives, capital budgeting process, replacement analysis, comparing decision alternatives.. 6

7 ENGINES AND VEHICLES COURSE CODE: SGMJHX38XXN ECTS CREDITS: 4 TEACHING HOURS 2+2 Dr. Péter KISS kiss.peter@gek.szie.hu The basic objective of the course is to introduce the engine and vehicle technology for the students. The main topics of the subject are: theory, classification and principle of engines. Petrol and Diesel engines. Structures of engines. Testing and engine s curves. Theory, classification and principle of vehicles. On- and off-road vehicles. Transmission, steering, undercarriage, suspension, braking. Safety of vehicles. Vehicle s energetics. Required literature Richard van Basshuysen, Fred Schafer: Modern Engine Technology. SAE International ISBN Heinz Heisler: Advanced Vehicle Technology. Butterworth-Heinemann ISBN Recommended literature A.J. Martyr M.A. Plint: Engine Testing Theory and Practice. SAE International SAE ISBN Milton Automotive Handbook. Robert Bosch GmbH, 2007 ISBN: , 7

8 ENVIRONMENTAL ENGINEERING TECHNOLOGIES COURSE CODE: SGMKLX24XXN ECTS CREDITS: 4 TEACHING HOURS 2+1 Gábor GÉCZI geczi.gabor@gek.szie.hu This subject concentrates on introducing the operations and the processes that can be applied in environmental protection with emphasis on their technical background and equipment. The main parts of the subject are: mechanical-, hydrodynamic-, caloric- and mass transport operations and chemical- and biological processes. Environmental protection technologies: air protection, water and sewage management, soil protection, waste management, noise and vibration protection, radiation protection. Subject outline: No. Date Lectures 1. Introduction, basic concepts, requirements 2. Mechanical- operations: Milling, Compacting, Sorting 3. Mechanical- and hydrodynamic operations: Storage, Mass transport, Fluid flow 4. Hydrodynamic operations: Mixing, Settling, Sedimentation 5. Hydrodynamic operations: Filtering, Centrifugation spinning 6. Caloric- and mass transport operations: Heat transfer, Evaporations, Distillations 8

9 7. Mass transport operations: Absorption, Stripping, Adsorption Extraction 8. Mass transport operations: Drying, Membrane separation 9. Chemical process: Burning, Combustion, Oxidation reduction 10. Chemical process: Solidification, Neutralization, Ion exchange, Clarification 11. Biological process: Aerobe biological methods 12. Biological process: Anaerobe fermentation 13. Environmental Technologies 14. Summary 15. Written examination Practice: Two times a semester will be organized study-tours (Waste to energy plant, Green-bridge Ltd, Matra Power Plant, etc.) Reading: Required literature: Gabor Geczi (2014) Environmental Engineering 62p. Géczi G. Környezettechnika (2009) 96p.egyetemi jegyzet translation by Gabor Geczi Recommended literature David H. Lui and Bela G. Liptak: Environmental Engineer's Handbook (1997) 9

10 ETHICS FOR ENGINEERS COURSE CODE: SGMMC3842C ECTS CREDITS: 2 TEACHING HOURS 2 Dr. István GYÜRK gyurk.istvan@gek.szie.hu Engineers practising their profession often face moral problems. It is our goal to arouse responsible reflection on moral issues and to provide tools to give proper answers on professional ethical problems. The course deals with key ethical concepts, theories, such as consequentialism, deontology etc. Compares ethics, law and etiquette. Some selected chapters: Engineer in the society, Safety and the engineers responsibility, Environmental ethics, Engineer and energy, Moral leadership, The engineer as employee and employer, Computer ethics, Research ethics, Moral issues of publication, etc. 10

11 FOOD QUALITY MANAGEMENT COURSE CODE: SGMMTX24XXN ECTS CREDITS: 3 TEACHING HOURS 2 Dr. Péter Korzenszky korzenszky.peter@gek.szie.hu Contemporary food industry produces thousands of foodstuffs. The manufacturing technology is slightly different, but the processing steps are basically common for each of them. The course introduces the main units of operations and the machinery of food processing and preservation. Their effect on food quality and consumer - appeal factors are also discussed. 11

12 INFORMATICS II. COURSE CODE: SGMIFX28XXN ECTS CREDITS: 3 TEACHING HOURS 2 Dr. Lászlóné OROVA orova.laszlone@gek.szie.hu The aims of this subject are to assist students in founding their programming skills and to introduce application of numerical methods of mathematics. Topics include algorithms, program languages, compliers-interpreters, syntax, data types, coding, controlling. Programs are written not only for basic algorithms but for several numerical methods like finding roots, fitting functions, integration, solving differential equations and finding eigenvalues and eigenvectors of matrixes. The numerical methods are demonstrated in spreadsheets as well. 12

13 PARTIAL DIFFERENTIAL EQUATIONS COURSE CODE: ECTS CREDITS: 3 TEACHING HOURS SGMMA7809GN Dr. Zoltán SEBESTYÉN sebestyen.zoltan@gek.szie.hu The course deals with the most important partial differential equations of mathematical physics, which frequently occur in engineering. First we study the basic concepts and the classification of linear partial differential equations of second order. Then, we discuss various problems with wave, and heat. The Poisson equations are also discussed and solutions given using different methods. Topics of the course 1. Review of the basic elements of calculus: differentiation and integration of functions of one and several variables Partial differential equations in Physics: the wave and the heat equation. ThePoisson equation. Partial differential equations. Basic concepts. 4. Classification of second order linear partial differential equations and their canonical form in case of two variables. 5. Classification of second order linear partial differential equations with constant coefficients and their canonical form. 13

14 6-7. General principles for the solution of initial value problems in hyperbolic and parabolic case. Written exam. Linear operators. The Fourier transform. 8. Solution of initial value problems for the one dimensional heat. 9. Mixed problems for the heat and wave equations in half-infinite case. 10. The space of square-integrable functions on a given domain. Inner product. Orthonormal systems Eigenvalues and eigenfunctions of linear operators. Symmetric operators. Eigenvalues and eigenfunctions of the Laplace operator. 14

15 PHYSICAL EXPERIMENTS COURSE CODE: SGMFFX23XXN ECTS CREDITS: 3 TEACHING HOURS 2 Dr. István SERES seres.istvan@gek.szie.hu During the Physics lectures mainly the theory of the different physical phenomenon is exposed, sometime with some demonstration. This makes the subject very unpopular among the students, however the different Physics shows are full of interested people. On the other hand the people use a lot of different equipments, but they have no idea about the working principle of them, so often non scientific rumours are spreading on the net about the advantages or harmfulness of an equipment/method. The aim of the course is to do a lot of experiments from the different fields of Physics. Some of the planned experiments are just for fun there are some very surprising among them -, but there are a lot about the demonstration of working the different equipments (e.g. microwave oven), or to highlight the working of the different physical rules. All of the experiments are discussed, what was exactly happened and why. Further information: Seres.Istvan@gek.szie.hu Topics of the course 1. Experiments about the inertia (static and dynamic load) 2. Rotation (stroboscope, gyroscope, rotating table, Foucault pendulum) 15

16 3. Vibrations and waves (vibration of a string, tuning fork, sound speed measurement, vibration patterns in 2D and 3D) 4. Sound (whispering mirrors, Doppler effect, interference, db measurements of an earphone, He balloon) 5. Aero and Hydrostatics (air pressure, Torricelli, vacuum pump) 6. Hydrodynamics (experiments based on Bernoulli law) 7. Viscosity and surface tension (Non-newtonian liquid, bubbles, minimal surfaces) 8. Thermodynamics (heat expansion bimetal), extreme low temperatures (experiments with liquid nitrogen) 9. Electrostatics (contact electrification, balloon on the wall, Van de Graaf generator, lightning, piezo) 10. Electric current (black-lead flash, current in gases, measuring water conductivity) 11. Magnetic field (neodymium magnets, ferro-fluid, EM induction, induction cooking) 12. Optical experiments (fog machine, lasers, lenses and mirrors) 13. Optical illusions, 3D imaging 16

17 PROCESS CONTROL COURSE CODE: SGMFFX15XXN ECTS CREDITS: 4 TEACHING HOURS 2+1 Dr. István FARKAS farkas.istvan@gek.szie.hu Dr. János BUZÁS buzas.janos@gek.szie.hu Summary: The aim of the course is to give basic knowledge usable for describing, analyzing, modelling, simulation and control of dynamic systems from engineering practice. The main chapters are: process control fundamentals; configuration and hardware of control loop; mathematical model of control system; description of linear systems, analysis of linear systems in time and frequency domain; Laplace transform; signal flow chart reduction; properties of signal transfer elements; change of signal transfer properties with feedback. Subject outline: No. Date Lecture Practical work (in class or field) 1. 1 st week Introduction, basic concepts 2. 2 nd week Main functions and elements of control Working with the MATLAB user interface 3. 3 rd week Structure and elements of closed-loop control 4. 4 th week Mathematical model of control loop Automating commands with scripts, writing functions 5. 5 th week Mathematical model of linear systems, analysis of linear systems in time domain 17

18 6. 6 th week Analysis of linear systems in operator domain Modelling and simulating dynamic systems in Simulink, solution of ordinary differential equations 7. 7 th week Analysis of linear systems in frequency domain 8. 8 th week Connection methods of signal transfer elements, signal flow chart reduction Mathematical modeling of a process and simulating in Simulink th week Signal transfer properties of basic signal transfer elements I 10 th week Signal transfer properties of basic signal transfer elements II 11 th week Signal transfer properties of complex signal transfer elements I 12 th week Change of signal transfer properties with feedback Parameter sensitivity analysis Parameter identification in MATLAB th week New concepts in process control th week Exam Construct and simulating on/off and proportional control loops th week Discussion of exam Reading: Farkas,I.: Process control I, Szent István University, Lecture Notes, Gödöllő, 2013, Hungary Farkas,I.: Control aspects of postharvest technologies, Chapter No 29 of Handbook of postharvest Technology /ed. by A. Chakraverty, A.S. Mujumdar, G.S.V. Raghavan and H.S. Ramaswamy/, Marcel Dekker Inc., New York-Basel, 2003, pp Farkas,I. /ed/: Modelling, control and optimization. Greenhouse, drying and farm energy system, Gödöllő University of Agricultural Sciences, Textbook, 1998, Gödöllő, Hungary Stephanopoulos,G.: Chemical process control: an introduction to theory and practice, Prentice-Hall,

19 SOLAR ENERGY APPLICATION COURSE CODE: ECTS CREDITS: 3 TEACHING HOURS SGMFFX16XXN Dr. István FARKAS farkas.istvan@gek.szie.hu The aim of the course is to introduce the possibilities and technical solutions of the use of solar energy. Application possibilities, conditions and the main methods of solar energy utilization. Concept of integrated energy/technology system. Radiation conditions. Structure and operation of flat plate collectors, efficiency, storage, orientation, tilt angle, planning and sizing of phototermal systems. Structure and characteristics of solar cells and modules. Storage of produced energy, applications. 19