6th International Conference on Pumps and Fans with Compressors and Wine Turbines (ICPF 2013) Beijing, China September 2013.

Size: px
Start display at page:

Download "6th International Conference on Pumps and Fans with Compressors and Wine Turbines (ICPF 2013) Beijing, China September 2013."

Transcription

1 6th International Conference on Pumps and Fans with Compressors and Wine Turbines (ICPF 2013) IOP Conference Series: Materials Science and Engineering Volume 52 Beijing, China September 2013 Part 1 of 2 ISBN: ISSN:

2 Printed from e-media with permission by: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY Some format issues inherent in the e-media version may also appear in this print version. Copyright by the Institute of Physics All rights reserved. Printed by Curran Associates, Inc. (2015) For permission requests, please contact the Institute of Physics at the address below. Institute of Physics Dirac House, Temple Back Bristol BS1 6BE UK Phone: Fax: techtracking@iop.org Additional copies of this publication are available from: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY USA Phone: Fax: curran@proceedings.com Web:

3 TABLE OF CONTENTS PART 1 INVITED LECTURES CHALLENGES AND PROGRESS IN TURBOMACHINERY DESIGN SYSTEMS... 1 R A Van den Braembussche INCEPTION MECHANISM AND SUPPRESSION OF ROTATING STALL IN AN AXIAL-FLOW FAN... 9 T Nishioka A CAVITATION MODEL BASED ON EULERIAN STOCHASTIC FIELDS F Magagnato, J Dumond ON THE HYDRODYNAMICS OF ROCKET PROPELLANT ENGINE INDUCERS AND TURBOPUMPS L d'agostino CAVITATION INSTABILITIES IN HYDRAULIC MACHINES Y Tsujimoto STEADY AND TRANSIENT REGIMES IN HYDROPOWER PLANTS A Gajic APPLICATION OF ENERGY GRADIENT THEORY IN FLOW INSTABILITY IN A CENTRIFUGAL PUMP H S Dou, W Jiang THREE-DIMENSIONAL INVERSE METHOD FOR AERODYNAMIC OPTIMIZATION IN COMPRESSOR W Yang RESEARCH STATUS ON AERO-ACOUSTIC NOISE FROM WIND TURBINE BLADES B Yang A REVIEW OF RECENT THEORETICAL INVESTIGATIONS ON ACOUSTIC CAVITATION BUBBLES AND THEIR IMPLICATIONS ON DETECTION OF CAVITATION IN PUMPS Y N Zhang PRINCIPLES OF FLUID MACHINERY 2.1 BASIC ANALYSIS NUMERICAL METHODS AND TRANSITION INVESTIGATION OF TRANSIENT FLOWS AROUND A PITCHING HYDROFOIL Q Wu, G Y Wang, B Huang ASSESSMENT OF RANS TO PREDICT FLOWS WITH LARGE STREAMLINE CURVATURE J L Yin, D Z Wang, H Cheng, W G Gu ON PART LOAD RECIRCULATION OF PUMPS AND FANS-A GENERIC STUDY D Stapp, P F Pelz, J M Loens BLADE ROWS INTERACTION IN CONTRA-ROTATING AXIAL FLOW PUMP DESIGNED WITH DIFFERENT ROTATIONAL SPEED CONCEPT L L Cao, S Watanabe, T Imanishi, H Yoshimura, A Furukawa INFLUENCE OF HINGE POINT ON FLEXIBLE FLAP AERODYNAMIC PERFORMANCE H Y Zhao, Z Ye, P Wu, C Li STABILITY STUDY OF FLOW IN A 90 BEND BASED ON THE ENERGY GRADIENT THEORY L Niu, H S Dou 2.2 DESIGN METHOD NUMERICAL CALCULATION AND OPTIMAL DESIGN OF A HOT WATER CIRCULATION PUMP H Zhang, F Y Kong, B Xia, L W Tan

4 RESEARCH OF FACTORS INFLUENCING CENTRIFUGAL PUMP EXTERNAL CHARACTERISTICS BASED ON ORTHOGONAL TEST X B Huang, Z Q Liu HYDRAULIC PERFORMANCE OF A LOW SPECIFIC SPEED CENTRIFUGAL PUMP WITH SPANWISE-SLOTTED BLADES D X Ye, H Li, Y Wang RESEARCH AND OPTIMIZATION ON STATOR CURVE FOR ROLLER PUMP G L Yang, J F Zhang, H S Su, L Q Zhang MULTI-POINT OPTIMIZATION ON THE DIFFUSER OF AN AXIAL FLOW PUMP P Yan, T Chen, D Z Wu, L Q Wang DESIGN OPTIMIZATION OF FLOW CHANNEL AND PERFORMANCE ANALYSIS FOR A NEW-TYPE CENTRIFUGAL BLOOD PUMP J J Ji, X W Luo, Q Y Wu GLOBAL DESIGN OPTIMIZATION FOR AN AXIAL-FLOW TANDEM PUMP BASED ON SURROGATE METHOD D H Li, Y Zhao, G Y Wang FULL 3-D VISCOUS OPTIMIZATION DESIGN OF A REVERSIBLE PUMP TURBINE RUNNER X H Wang, B S Zhu, S L Cao, L Tan DESIGN AND OPTIMIZATION OF A LARGE FLOW RATE BOOSTER PUMP IN SWRO ENERGY RECOVERY SYSTEM Z N Lai, P Wu, D Z Wu, L Q Wang NEW INVERSE METHOD OF CENTRIFUGAL PUMP BLADE BASED ON FREE FORM DEFORMATION R H Zhang, M Guo, J H Yang, Y Liu, R N Li OPTIMAL DESIGN AND PERFORMANCE ANALYSIS OF AN EXTERNAL CIRCULATION UN- CONTACT ROTOR PUMP H S Su, G L Yang, L Q Zhang, C H Fang, R N Li 2.3 EXPERIMENTAL STUDY DATA REDUCTION PROBLEMS USING A 3-HOLE DIRECTIONAL PRESSURE PROBE TO INVESTIGATE MEAN FLOW CHARACTERISTICS IN THE VANELESS GAP BETWEEN IMPELLER AND DIFFUSER RADIAL PUMP P Cherdieu, P Dupont, A C Bayeul-Lainé, A Dazin, G Bois PIV MEASUREMENTS IN A COMPACT RETURN DIFFUSER UNDER MULTI-CONDITIONS L Zhou, W G Lu, W D Shi PERFORMANCE CORRECTION CHART OF CENTRIFUGAL OIL PUMP FOR HANDLING VISCOUS LIQUIDS G J Cao, W H Zhang, J Chen, S H Fu EXPERIMENTAL STUDY ON RUNAWAY CHARACTERISTICS OF PUMP SYSTEM F Yang, C Liu, F P Tang, J R Zhou LABORATORY STUDIES OF WATER COLUMN SEPARATION R Autrique, E Rodal EXPERIMENTAL STUDY ON UNSTEADY CLOUD CAVITY BEHAVIOUR AND INDUCED PRESSURE FLUCTUATION IN A CONVERGENT-DIVERGENT CHANNEL USING SIMULTANEOUS MEASUREMENT TECHNIQUE G H Chen, G Y Wang, B Huang, X Huang, Y Gao 2.4 NUMERICAL SIMULATION STUDY ON INSTALLATION OF THE SUBMERSIBLE MIXER F Tian, W D Shi, X H He, H Jiang, Y H Xu ANALYSIS ON THE BLADE INLET PRESSURE FLUCTUATION OF THE CENTRIFUGAL PUMP BASED ON LES W J Wang, Y R Cui, Y Wang, G D Li, Q H Liang, G Yin RESEARCH OF FLUID-INDUCED PRESSURE FLUCTUATION DUE TO IMPELLER-VOLUTE INTERACTION IN A CENTRIFUGAL PUMP Q Z Liu, K Yang, D Y Li, R Z Gong

5 NUMERICAL SIMULATION AND UNCERTAINTY ESTIMATION IN A DEEP-WELL CENTRIFUGAL PUMP L Bai, W D Shi, L Zhou, W G Lu NUMERICAL SIMULATION OF THE FLOW FIELD IN PUMP INTAKES BY MEANS OF LATTICE BOLTZMANN METHODS A Schneider, D Conrad, M Böhle A NEW NONLINEAR TURBULENCE MODEL BASED ON PARTIALLY-AVERAGED NAVIER- STOKES EQUATIONS J T Liu, Y L Wu, C Cai, S H Liu, L Q Wang NUMERICAL SIMULATION OF 3D UNSTEADY FLOW IN A ROTATING PUMP BY DYNAMIC MESH TECHNIQUE S Huang, J Guo, F X Yang NUMERICAL SIMULATION OF UNSTEADY CAVITATING FLOWS USING A FRACTIONAL STEP METHOD PRESERVING THE MINIMUM/MAXIMUM PRINCIPLE FOR THE VOID FRACTION R Chebli, O Coutier-Delgosha, B Audebert LARGE EDDY SIMULATION OF PRESSURE FLUCTUATIONS AT OFF-DESIGN CONDITION IN A FRANCIS TURBINE BASED ON CAVITATION MODEL W T Su, X B Li, F C Li, W F Han, X Z Wei, J Guo 2.5 MECHANICAL DYNAMICS AND ROTOR DYNAMICS VIBRATION ANALYSIS OF LARGE CENTRIFUGAL PUMP ROTORS W Y Zhao, J G Ge, D Ma, C M Li, S B Bao THE INFLUENCE OF ANNULAR SEAL CLEARANCE TO THE CRITICAL SPEED OF THE MULTISTAGE PUMP J Wang, H P Shen, X Y Ye, J N Hu, Y N Feng COMPUTATION OF STRESS DISTRIBUTION IN A MIXED FLOW PUMP BASED ON FLUID- STRUCTURE INTERACTION ANALYSIS F F Hu, T Chen, D Z Wu, L Q Wang DYNAMIC BEHAVIOUR OF PUMP-TURBINE RUNNER: FROM DISK TO PROTOTYPE RUNNER X X Huang, E Egusquiza, C Valero, A Presas NUMERICAL STUDY ON AIR-STRUCTURE COUPLING DYNAMIC CHARACTERISTICS OF THE AXIAL FAN BLADE Q G Chen, B Xie, F Li, W G Gu INVESTIGATION ON FLUID ADDED MASS EFFECT IN THE MODAL RESPONSE OF A PUMP-TURBINE RUNNER L Y He, Y He, Y Y Luo, Z W Wang ANALYSIS ON PRESSURE CHARACTERISTICS OF PUMP TURBINE GUIDE BEARING ROTATING SUMP BASED ON VOF MODEL L M Zhai, Z Yao, Q S Huang, Y X Xiao, Z W Wang AIR-STRUCTURE COUPLING FEATURES ANALYSIS OF MINING CONTRA-ROTATING AXIAL FLOW FAN CASCADE Q G Chen, W Sun, F Li, Y J Zhang PREDICTION OF FLOW- INDUCED DYNAMIC STRESS IN AN AXIAL PUMP IMPELLER USING FEM J Y Gao, Y S Hou, S Z Xi, Z H Cai, P P Yao, H L Shi STATIC CHARACTERISTIC ANALYSIS ON A HYDRODYNAMIC BEARING OF A HYDRAULIC SUSPENDED MICROPUMP B T Zhuang, X W Luo, J T Liu, H Y Xu 2.6 ACOUSTICS EXPERIMENTAL STUDY ON NOISE REDUCTION EFFECT OF A MUFFLER INSERTED IN LIQUID TRANSPORTING PIPELINE T Du, W W Xu, D Z Wu, L Q Wang NUMERICAL CHARACTERIZATION OF PRESSURE INSTABILITIES IN A VANED CENTRIFUGAL PUMP UNDER PARTLOAD CONDITION J Yang, G Pavesi, G Cavazzini, S Q Yuan

6 RADIATED BPF SOUND MEASUREMENT OF CENTRIFUGAL COMPRESSOR S Ohuchida, K Tanaka EXPERIMENTAL AND NUMERICAL ANALYSIS ON NOISE REDUCTION IN A MULTI- BLADE CENTRIFUGAL FAN X J Chen, T Y Cao, J Su, G L Qin NUMERICAL SIMULATION OF FAR FIELD ACOUSTICS OF AN AIRFOIL USING VORTEX METHOD AND 2-D FW-H EQUATION S H Jia, B Yang, X L Zhao, J Z Xu PUMPS 3.1 CENTRIFUGAL PUMPS NUMERICAL SIMULATION AND PERFORMANCE PREDICTION IN MULTI-STAGE SUBMERSIBLE CENTRIFUGAL PUMP W J Wang, G D Li, Y Wang, Y R Cui, G Yin, S Peng THE OPTIMIZATION OF A LOW SPECIFIC SPEED PIPELINE PUMP A Zhao, P Wu, D Z Wu, L Q Wang CFD ANALYSIS ON A TURBULENCE GENERATOR OF MEDIUM CONSISTENCY PUMP X D Ma, D Z Wu, D S Huang, H Yu, L Q Wang NUMERICAL ANALYSIS OF THE FLOW FIELD IN THE PUMP CHAMBER OF A CENTRIFUGAL PUMP WITH BACK BLADES L Cao, Z W Wang, Y Y Luo, M Liu SUPPRESSION OF THE SECONDARY FLOW IN A SUCTION CHANNEL OF A LARGE CENTRIFUGAL PUMP D Torii, T Nagahara, T Okihara NUMERICAL INVESTIGATION OF NONLINEAR VIBRATION FOR ROTOR-SEAL SYSTEM OF CENTRIFUGAL PUMP W J Zhou, Y C Yang, G K Xing, L Q Wang DEVELOPMENT AND TEST OF A PLASTIC DEEP-WELL PUMP Q H Zhang, X F Gao, Y Xu, W D Shi, W G Lu, W Liu SUPPRESSION OF SECONDARY FLOWS IN A DOUBLE SUCTION CENTRIFUGAL PUMP WITH DIFFERENT LOADING DISTRIBUTIONS H F Leng, F J Wang, Z C Zhang, Z F Yao, P J Zhou INVESTIGATION ON IMPELLER RADIAL FORCE FOR DOUBLE-SUCTION CENTRIFUGAL PUMP WITH STAGGERED BLADE ARRANGEMENT Z C Zhang, F J Wang, Z F Yao, H F Leng, P J Zhou 3.2 AXIAL AND MIXED FLOW PUMPS ORTHOGONAL TEST AND EXPERIMENTAL STUDY ON FIRE FLOATING PUMP J R Liu, J F Zheng, D P Fu, P Wang PERFORMANCE ANALYSIS OF AXIAL FLOW PUMP ON GAP CHANGING BETWEEN IMPELLER AND GUIDE VANE W J Wang, Q H Liang, Y Wang, Y Yang, G Yin, X X Shi HYDRAULIC PERFORMANCE NUMERICAL SIMULATION OF HIGH SPECIFIC SPEED MIXED-FLOW PUMP BASED ON QUASI THREE-DIMENSIONAL HYDRAULIC DESIGN METHOD Y X Zhang, M Su, H C Hou, P F Song STUDY ON TRANSIENT HYDRODYNAMIC PERFORMANCE AND CAVITATION CHARACTERISTIC OF HIGH-SPEED MIXED-FLOW PUMP T Chen, Y B Sun, Y L Liu, D Z Wu, L Q Wang HYDRAULIC PERFORMANCE IMPROVEMENT OF THE BIDIRECTIONAL PIT PUMP INSTALLATION BASED ON CFD H X Chen, D Q Zhou TURBULENT FLOW AND PRESSURE FLUCTUATION PREDICTION OF THE IMPELLER IN AN AXIAL-FLOW PUMP BASED ON LES J F Shen, Y J Li, Z Q Liu, X L Tang NUMERICAL ANALYSIS OF AN AXIAL-FLOW PUMP WITH DIFFERENT BELL MOUTHS M H He, H F Li, K Ji, S L Wang, C J Diao, X F Zhang

7 3.3 SPECIAL PUMPS RESEARCH ON ENERGY CONVERSION MECHANISM OF A SCREW CENTRIFUGAL PUMP UNDER THE WATER H Quan, R N Li, Q M Su, W Han, X R Cheng, Z J Shen NUMERICAL CALCULATION AND ANALYSIS OF RADIAL FORCE ON THE SINGLE- ACTION VANE PUMP Y Y He, F Y Kong TRANSIENT SIMULATION IN INTERIOR FLOW FIELD OF LOBE PUMP Y B Li, X H Sang, Q W Meng, H Shen, K Jia NUMERICAL ANALYSIS OF THE INTERNAL FLOW FIELD IN SCREW CENTRIFUGAL BLOOD PUMP BASED ON CFD W Han, B X Han, H Y Wang, Z J Shen EFFECT OF THE COLLECTOR TUBE PROFILE ON PITOT PUMP PERFORMANCES K Komaki, T Kanemoto, K Sagara, T Umekage FLOW SIMULATION OF THE EFFECTS OF PRESSURE ANGLE TO LOBE PUMP ROTOR MESHING CHARACTERISTICS Y B Li, K Jia, Q W Meng, H Shen, X H Sang ANALYSIS OF FLOW CHARACTERISTICS OF A CAM ROTOR PUMP Y Y Liu, T C Miao, D Z Wu, L Q Wang COMPRESSORS, FANS AND TURBOCHARGERS 4.1 COMPRESSORS NUMERICAL INVESTIGATION ON PRESSURE FLUCTUATIONS IN CENTRIFUGAL COMPRESSOR WITH DIFFERENT INLET GUIDE VANES PRE-WHIRL ANGLES Y C Wang, M Shi, S L Cao, Z H Li STUDY ON FLOW FIELD IN CAPACITY REGULATING ACTUATOR FOR RECIPROCATING COMPRESSOR J L Cao, W R Hong, Y Li, Z K He PERFORMANCE IMPROVEMENT OF A CENTRIFUGAL COMPRESSOR STAGE BY USING DIFFERENT VANED DIFFUSERS Y C Zhang, X Z Kong, F Li, W Sun, Q G Chen PART 2 A STUDY ON THE OIL FLOW CHARACTERISTICS IN THE INVERTER ROTARY COMPRESSOR H J Kim, Y J Kim 4.2 FANS AND BLOWERS FLOW PERFORMANCE OF HIGHLY LOADED AXIAL FAN WITH BOWED ROTOR BLADES L Chen, X J Liu, A L Yang, R Dai PARAMETRIC MODELING AND STAGGER ANGLE OPTIMIZATION OF AN AXIAL FLOW FAN M X Li, C H Zhang, Y Liu, S Y Zheng DEVELOPMENT OF MONITORING AND CONTROL SYSTEM FOR A MINE MAIN FAN BASED ON FREQUENCY CONVERTER Y C Zhang, R W Zhang, X Z Kong, J Y Gong, Q G Chen EFFECTS OF ANTI-RECIRCULATION RING ON PERFORMANCE OF AN AUTOMOTIVE COOLING FAN Q G Chen, Y C Zhang, F Li, X Z Kong, X H Luan NUMERICAL SIMULATION OF THE WHOLE FLOW FIELD OF AN AXIAL-FLOW FAN USED IN AN AIR CONDITIONER Q G Chen, F Li, Q Hu, Y N Gao

8 EFFECT OF THE TUBULAR-FAN DRUM SHAPES ON THE PERFORMANCE OF CLEANING HEAD MODULE C K Hong, M Y Cho, Y J Kim 4.3 TURBOCHARGERS AN EVALUATION OF 1D LOSS MODEL COLLECTIONS FOR THE OFF-DESIGN PERFORMANCE PREDICTION OF AUTOMOTIVE TURBOCHARGER COMPRESSORS P Harley, S Spence, J Early, D Filsinger, M Dietrich A NUMERICAL STUDY OF AUTOMOTIVE TURBOCHARGER MIXED FLOW TURBINE INLET GEOMETRY FOR OFF DESIGN PERFORMANCE T Leonard, S Spence, J Early, D Filsinger ENLARGING THE OPERATION RANGE OF A CENTRIFUGAL COMPRESSOR BY CUTTING VANES BASED ON CFD J T Mo, C H Gu, X H Pan, S Y Zheng CENTRIFUGAL COMPRESSOR DESIGN FOR ELECTRICALLY ASSISTED BOOST M Y Yang, R F Martinez-Botas, W L Zhuge, U Qureshi, B Richards 4.4 ORC (ORGANIC RANKINE CYCLE) MACHINERY THERMODYNAMIC AND DESIGN CONSIDERATIONS OF ORGANIC RANKINE CYCLES IN COMBINED APPLICATION WITH A SOLAR THERMAL GAS TURBINE R Braun, K Kusterer, T Sugimoto, K Tanimura, D Bohn OPTIMIZATION OF THE BLADE TRAILING EDGE GEOMETRIC PARAMETERS FOR A SMALL SCALE ORC TURBINE L Zhang, W L Zhuge, J Peng, S J Liu, Y J Zhang NUMERICAL SIMULATION OF THREE-DIMENSIONAL UNSTEADY FLOW IN A SCROLL EXPANDER APPLIED IN WASTE HEAT RECOVERY P P Song, M S Wei, L Shi, C C Ma PARAMETRIC AND EXERGETIC ANALYSIS OF A TWO-STAGE TRANSCRITICAL COMBINED ORGANIC RANKINE CYCLE USED FOR MULTIPLE GRADES WASTE HEAT RECOVERY OF DIESEL ENGINE H Tian, J Zhang, X F Xu, G Q Shu, H Q Wei TURBINES 5.1 WIND TURBINES INVESTIGATION OF THE TWO-ELEMENT AIRFOIL WITH FLAP STRUCTURE FOR THE VERTICAL AXIS WIND TURBINE Y Wei, C Li UNSTEADY FLOW FIELD IN A MINI VAWT WITH RELATIVE ROTATION BLADES: ANALYSIS OF TEMPORAL RESULTS A C Bayeul-Lainé, S Simonet, G Bois NUMERICAL ANALYSIS OF LINEAR BUCKLING OF WIND TURBINE BLADE WITH DIFFERENT TRAILING BONDING MODELS J D Zhang, Y Xu COMPARISON OF THE PRESSURE DISTRIBUTION OF A WIND TURBINE BLADE BASED ON FIELD EXPERIMENT AND CFD D S Li, R N Li, L J Wei, X Y Wang, Y Qiang, Y R Li INFLUENCE OF TRAILING EDGE FLAP ON WIND TURBINE BLADE USING THREE- DIMENSIONAL COMPUTATIONAL FLUID DYNAMICS METHOD C F Li, Y Xu, X L Zhao, J Z Xu NUMERICAL EVALUATIONS OF THE EFFECT OF LEADING-EDGE PROTUBERANCES ON THE STATIC AND DYNAMIC STALL CHARACTERISTICS OF AN AIRFOIL C Cai, Z G Zuo, S H Liu, Y L Wu, F B Wang INFLUENCE OF INFLOW ANGLE ON FLEXIBLE FLAP AERODYNAMIC PERFORMANCE H Y Zhao, Z Ye, Z M Li, C Li

9 THE STIFFNESS TAILORING OF MEGAWATT WIND TURBINE Z M Li, C Li, Z Ye, P Wu, Y F Lu RESEARCH ON FOUNDATION RESPONSE OF A TRI-FLOATER OFFSHORE WIND TURBINE Y W Gao, C Li, X Cheng STUDY ON EXTREME TURBULENCE WIND CONDITIONS OF MULTIBODY DYNAMICS SIMULATION FOR MW-CLASS WIND TURBINE P Wu, C Li, Z Ye STATISTICAL ANALYSIS OF LOW FREQUENCY VIBRATIONS IN VARIABLE SPEED WIND TURBINES X Escaler, T Mebarki EFFECT OF OSCILLATION FREQUENCY ON WIND TURBINE AIRFOIL DYNAMIC STALL Z Zhou, C Li, J B Nie, Y Chen OPTIMIZATION DESIGN OF WIND TURBINE DRIVE TRAIN BASED ON MATLAB GENETIC ALGORITHM TOOLBOX R N Li, X Liu, S J Liu EFFECT OF MOMENT OF INERTIA TO H TYPE VERTICAL AXIS WIND TURBINE AERODYNAMIC PERFORMANCE C X Yang, S T Li DYNAMIC ERROR ANALYSIS BASED ON FLEXIBLE SHAFT OF WIND TURBINE GEARBOX H Liu, R Z Zhao COUPLED VIBRATION STUDY OF THE BLADE OF THE FLEXIBLE WIND WHEEL WITH THE LOW-SPEED SHAFTING L Y Su, R Z Zhao, H Liu, Z R Meng 5.2 ENERGY AND ENERGY RECOVERY FLOW FIELD CHARACTERISTICS ANALYSIS OF A HORIZONTAL AXIS MARINE CURRENT TURBINE BY LARGE EDDY SIMULATION Q Guo, L J Zhou, Y X Xiao, Z W Wang SHAPE DESIGN AND CFD ANALYSIS ON A 1MW-CLASS HORIZONTAL AXIS TIDAL CURRENT TURBINE BLADE P M Singh, Y D Choi AN ANALYTIC APPROACH TO OPTIMIZE TIDAL TURBINE FIELDS P Pelz, M Metzler BLADE DESIGN AND PERFORMANCE ANALYSIS ON THE HORIZONTAL AXIS TIDAL CURRENT TURBINE FOR LOW WATER LEVEL CHANNEL C C Chen, Y D Choi, H Y Yoon THE PREDICTION OF THE HYDRODYNAMIC PERFORMANCE OF TIDAL CURRENT TURBINES B Y Xiao, L J Zhou, Y X Xiao, Z W Wang THE INTERNAL FLOW PATTERN ANALYSIS OF A TIDAL POWER TURBINE OPERATING ON BIDIRECTIONAL GENERATION-PUMPING Y Y Luo, Y X Xiao, Z W Wang 5.3 PUMP TURBINES OPTIMIZATION OF TESTING SYSTEM AND EXPERIMENT RESEARCH FOR PUMP TURBINE MODEL D Y Li, H J Wang, J L Zhao, R Z Gong, X Z Wei, D Q Qin NUMERICAL STUDY OF PRESSURE FLUCTUATIONS TRANSFER LAW IN DIFFERENT FLOW RATE OF TURBINE MODE IN A PROTOTYPE PUMP TURBINE Y K Sun, Z G Zuo, S H Liu, Y L Wu, J T Liu, D Q Qin, X Z Wei INTERACTION EFFECTS ON THE UNSTABLE DISCHARGE-ENERGY CHARACTERISTIC OF PUMP-TURBINE IN PUMP MODE R Tao, R F Xiao, W Yang, W C Liu NUMERICAL ANALYSIS OF MISALIGNED GUIDE VANES EFFECT PRESSURE OSCILLATIONS IN A PROTOTYPE PUMP TURBINE Y X Xiao, J Zhang, Y Y Luo, Z W Wang, H H Xu

10 CFD RESEARCH ON RUNAWAY TRANSIENT OF PUMPED STORAGE POWER STATION CAUSED BY PUMPING POWER FAILURE L G Zhang, D Q Zhou 3-D SIMULATION OF A PROTOTYPE PUMP-TURBINE DURING STARTING PERIOD IN TURBINE MODEL T J Chen, X Q Luo, P C Guo, Y L Wu 5.4 HYDRAULIC TURBINES NUMERICAL PREDICTION FOR EFFECTS OF GUIDE VANE BLADE NUMBERS ON HYDRAULIC TURBINE PERFORMANCE F X Shi, J H Yang, X H Wang, C E Li THE OPTIMIZATION OF J-GROOVE SHAPE IN THE DRAFT TUBE OF A FRANCIS TURBINE TO SUPPRESS THE DRAFT SURGE Q S Wei, Y D Choi PERFORMANCE AND INTERNAL FLOW CHARACTERISTICS OF A CROSS-FLOW TURBINE BY GUIDE VANE ANGLE Z M Chen, Y D Choi NUMERICAL ANALYSIS OF THE BUCKET SURFACE ROUGHNESS EFFECTS IN PELTON TURBINE Y X Xiao, C J Zeng, J Zhang, Z G Yan, Z W Wang OPTIMUM DESIGN OF EXIT GUIDE VANE ON THE BIDIRECTIONAL TUBULAR TURBINE X B Zheng, X Zheng, J Y Ma EFFECTS OF DRAFT TUBE ON THE HYDRAULIC PERFORMANCE OF A FRANCIS TURBINE J H Jeon, S S Byeon, Y J Kim CAVITATION AND MULTIPHASE FLOW 6.1 MULTIPHASE FLOW THE EFFECT OF DIFFERENT PARTICLE DIAMETERS ON WASTE SUBMERSIBLE MOTOR- PUMP'S TWO-PHASE FLOWS W J Wang, G Yin, Y Wang, Y R Cui, G D Li, Q H Liang STUDY ON SOLID-LIQUID TWO-PHASE UNSTEADY FLOW CHARACTERISTICS WITH DIFFERENT FLOW RATES IN SCREW CENTRIFUGAL PUMP R N Li, H Y Wang, W Han, W Ma, Z J Shen APPLICATION OF TWO-FLUID MODEL IN THE UNSTEADY FLOW SIMULATION FOR A MULTIPHASE ROTODYNAMIC PUMP Z Y Yu, B S Zhu, S L Cao, G Y Wang NUMERICAL INVESTIGATION OF SEDIMENT EROSION TO THE IMPELLER IN A DOUBLE-SUCTION CENTRIFUGAL PUMP C X Yang, F D Dong, X R Cheng EROSION PREDICTIONS OF STOCK PUMP IMPELLERS BASED ON LIQUID-SOLID TWO- PHASE FLUID SIMULATIONS Y X Xiao, B Fang, C J Zeng, L B Yang, F Wang, Z W Wang EROSIVE CORROSION IN TUBE CONSIDERING CHLORINE IONS AND BUBBLES VIA NUMERICAL SIMULATION S Y Chen, Z Q Zeng, Y P Qu, T Hu A NUMERICAL STUDY ON THE INFLUENCE OF GAS-LIQUID TWO PHASE FLOW ON THE ROTARY PUMP PERFORMANCES T C Miao, Y Y Liu, F Zhao, L Q Wang NUMERICAL RESEARCH ON THE EFFECTS OF IMPELLER PUMP-OUT VANES ON AXIAL FORCE IN A SOLID-LIQUID SCREW CENTRIFUGAL PUMP X R Cheng, R N Li, Y Gao, W L Guo EVALUATION OF INHOMOGENEOUS MODEL AND THE LCS BASED INVESTIGATION IN MULTIPHASE FLOWS Z Y Bai, G Y Wang, Q Wu, X Huang, B Huang

11 6.2 CAVITATION RESEARCH ON CAVITATION CHARACTERISTIC OF INDUCER N Qiu, L Q Wang, F Y Kong, D Z Wu INFLUENCE OF BLADE TIP ROUNDING ON TIP LEAKAGE VORTEX CAVITATION OF AXIAL FLOW PUMP S Q Wu, W D Shi, D S Zhang, J Yao, C Cheng RESEARCH OF THE CAVITATION PERFORMANCE OF THE CONDENSATE PUMP H F Li, Z B Pan, M H He, K Ji, W C Zhou, S M Min EVALUATION OF TURBULENCE MODELS FOR THE NUMERICAL PREDICTION OF TRANSIENT CAVITATION AROUND A HYDROFOIL W D Shi, G J Zhang, D S Zhang CAVITATION PERFORMANCE EVALUATION FOR A CONDENSATE PUMP A Yu, W P Yu, Z B Pan, X W Luo, B Ji, H Y Xu APPLICATION OF TWO TURBULENCE MODELS FOR COMPUTATION OF CAVITATING FLOWS IN A CENTRIFUGAL PUMP M He, Q Guo, L J Zhou, Z W Wang, X Wang NUMERICAL ANALYSIS OF UNSTEADY CAVITATION SHEDDING DYNAMICS AROUND NACA66 HYDROFOIL BY LARGE-EDDY SIMULATION B Ji, K Miyagawa, X W Luo, Y L Wu, H Y Xu NUMERICAL STUDY OF THE REENTRANT JET AND TWIN VORTEX FLOW REGIMES IN THE VENTILATED CAVITATION M Adama Maiga, R Chebli, O Coutier-Delgosha THE EFFECT OF CAVITATION ON THE HYDROFOIL DYNAMIC CHARACTERISTICS J Yang, L J Zhou, Z W Wang, F L Zhi PREDICTION OF CAVITATION PERFORMANCE OF A HYDROFOIL IN WATER AT HIGH TEMPERATURES Y L Wu, S H Liu, Z G Zuo NUMERICAL SIMULATION OF THE CAVITATION CHARACTERISTICS OF A MIXED-FLOW PUMP T Chen, S R Li, W Z Li, Y L Liu, D Z Wu, L Q Wang STUDY OF UNSTEADY CAVITATION FLOW OF A PUMP-TURBINE AT PUMP MODE J T Liu, Y L Wu, S H Liu SYSTEMS AND OTHER FLUID MACHINERY 7.1 SYSTEMS INFLUENCE OF DESIGN PARAMETERS OF DISCHARGE PASSAGE ON THE PERFORMANCE OF SHAFT TUBULAR PUMPING SYSTEM H G Zhu, R T Zhang, J Xia, H B Zhou, X C Tang EFFICIENCY MODEL OF PUMPING LOW VISCOSITY FLUIDS Y J Liu, Z Y Wang, W Wang, D Tang, J Lumkes Jr A DESALINATION PLANT WITH SOLAR AND WIND ENERGY H Chen, Z Ye, W Gao ANALYSIS ON INFLUENCE OF GUIDE VANES CLOSURE LAWS OF PUMP-TURBINE ON LOAD REJECTION TRANSIENT PROCESS Z Yao, H L Bi, Q S Huang, Z J Li, Z W Wang STUDY ON THE FLOW IN THE PIPELINES OF THE SUPPORT SYSTEM OF CIRCULATING FLUIDIZED BED L Meng, J Yang, L J Zhou, Z W Wang, X H Zhuang CFD STUDY ON FLOW CHARACTERISTICS OF PUMP SUMP AND PERFORMANCE ANALYSIS OF THE MIXED FLOW PUMP Y X Zhao, C G Kim, Y H Lee RESEARCH ON THE WATER HAMMER PROTECTION OF THE LONG DISTANCE WATER SUPPLY PROJECT WITH THE COMBINED ACTION OF THE AIR VESSEL AND OVER- PRESSURE RELIEF VALVE D D Li, J Jiang, Z Zhao, W S Yi, G Lan RESEARCH ON NUMERICAL SIMULATION AND PROTECTION OF TRANSIENT PROCESS IN LONG-DISTANCE SLURRY TRANSPORTATION PIPELINES G Lan, J Jiang, D D Li, W S Yi, Z Zhao, L N Nie

12 PUMP-STOPPING WATER HAMMER SIMULATION BASED ON RELAP W S Yi, J Jiang, D D Li, G Lan, Z Zhao EFFECTS OF AIR VESSEL ON WATER HAMMER IN HIGH-HEAD PUMPING STATION L Wang, F J Wang, Z C Zou, X N Li, J C Zhang 7.2 JETS AND SEALS NUMERICAL INVESTIGATION ON THE EXPANSION OF SUPERCRITICAL CARBON DIOXIDE JET Q Lv, X P Long, Y Kang, L Z Xiao, W Wu NUMERICAL SIMULATION OF HIGH-SPEED CAVITATING FLOWS IN SUBMERGED WATER JET G Peng, S Shimizu FLUID STRUCTURE INTERACTION DYNAMIC ANALYSIS OF A MIXED-FLOW WATERJET PUMP X W Pan, Z Y Pan, D Huang, Z H Shen NUMERICAL SIMULATION OF ADJUSTABLE NOZZLES S B Zhang, J M Zhu RESEARCH ON THE EFFECT OF WEAR-RING CLEARANCES TO THE AXIAL AND RADIAL FORCE OF A CENTRIFUGAL PUMP W G Zhao, M Y He, C X Qi, Y B Li NUMERICAL INVESTIGATION ON THE IMPACT OF THE CONVERGING ANGLE OF THE SUCTION CHAMBER ON ANNULAR JET PUMPS L Z Xiao, X P Long, W Wu, H F Yan, Y Kang THEORETICAL AND EXPERIMENTAL STUDY ON UNDERWATER JET CHARACTERISTICS FROM A SUBMERGED COMBUSTION SYSTEM R Lu, X H Qin, D Z Wu, H W Wang 7.3 COUPLINGS AND OTHER FLUID MACHINERY FLOW ANALYSIS IN A VANE-TYPE SURFACE TENSION PROPELLANT TANK A Yu, B Ji, B T Zhuang, Q Hu, X W Luo, H Y Xu NUMERICAL ANALYSIS ON THE EXTERNAL CHARACTERISTIC OF TORQUE CONVERTER BASED ON DYNAMIC MESH H S Su, G L Yang, L Q Zhang, J F Zhang, R N Li A STUDY ON THE FLOW CHARACTERISTICS OF THE FLUIDIC VORTEX DAMPER S W Cho, H S Seo, Y J Kim CFD NUMERICAL SIMULATION OF ARCHIMEDES SPIRAL INLET HYDROCYCLONE L Zhang, L Wei, B H Chang, J L Xing, K Jia NUMERICAL SIMULATION OF THE TWO-PHASE FLOWS IN A HYDRAULIC COUPLING BY SOLVING VOF MODEL Y Luo, Z G Zuo, S H Liu, H G Fan, W L Zhuge NUMERICAL COMPARISONS OF THE PERFORMANCE OF A HYDRAULIC COUPLING WITH DIFFERENT PUMP ROTATIONAL SPEEDS Y Luo, L H Feng, S H Liu, T J Chen, H G Fan Author Index

International Symposium of Cavitation and Multiphase Flow (ISCM 2014) Beijing, China October 2014

International Symposium of Cavitation and Multiphase Flow (ISCM 2014) Beijing, China October 2014 International Symposium of Cavitation and Multiphase Flow (ISCM 2014) IOP Conference Series: Materials Science and Engineering Volume 72 Beijing, China 18-21 October 2014 ISBN: 978-1-63439-883-1 ISSN:

More information

Contents. 2 Basic Components Aerofoils Force Generation Performance Parameters xvii

Contents. 2 Basic Components Aerofoils Force Generation Performance Parameters xvii Contents 1 Working Principles... 1 1.1 Definition of a Turbomachine... 1 1.2 Examples of Axial Turbomachines... 2 1.2.1 Axial Hydraulic Turbine... 2 1.2.2 Axial Pump... 4 1.3 Mean Line Analysis... 5 1.4

More information

Fluid structure interaction dynamic analysis of a mixed-flow waterjet pump

Fluid structure interaction dynamic analysis of a mixed-flow waterjet pump IOP Conference Series: Materials Science and Engineering OPEN ACCESS Fluid structure interaction dynamic analysis of a mixed-flow waterjet pump To cite this article: X W Pan et al 2013 IOP Conf. Ser.:

More information

1917. Numerical simulation and experimental research of flow-induced noise for centrifugal pumps

1917. Numerical simulation and experimental research of flow-induced noise for centrifugal pumps 1917. Numerical simulation and experimental research of flow-induced noise for centrifugal pumps Xiao-ping Rui 1, Yang Zhao 2 1 College of Resources and Environment, University of Chinese Academy of Sciences,

More information

Flow behaviour analysis of reversible pumpturbine in "S" characteristic operating zone

Flow behaviour analysis of reversible pumpturbine in S characteristic operating zone IOP Conference Series: Earth and Environmental Science Flow behaviour analysis of reversible pumpturbine in "S" characteristic operating zone To cite this article: S Q Zhang et al 2012 IOP Conf. Ser.:

More information

A Comparison of Thermal Deformation of Scroll Profiles inside Oil-free Scroll Vacuum Pump and Compressor via CAE/CFD Analysis

A Comparison of Thermal Deformation of Scroll Profiles inside Oil-free Scroll Vacuum Pump and Compressor via CAE/CFD Analysis Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2018 A Comparison of Thermal Deformation of Scroll Profiles inside Oil-free Scroll Vacuum

More information

Contents. 1 Introduction to Gas-Turbine Engines Overview of Turbomachinery Nomenclature...9

Contents. 1 Introduction to Gas-Turbine Engines Overview of Turbomachinery Nomenclature...9 Preface page xv 1 Introduction to Gas-Turbine Engines...1 Definition 1 Advantages of Gas-Turbine Engines 1 Applications of Gas-Turbine Engines 3 The Gas Generator 3 Air Intake and Inlet Flow Passage 3

More information

Analysis of flow characteristics of a cam rotor pump

Analysis of flow characteristics of a cam rotor pump IOP Conference Series: Materials Science and Engineering OPEN ACCESS Analysis of flow characteristics of a cam rotor pump To cite this article: Y Y Liu et al 2013 IOP Conf. Ser.: Mater. Sci. Eng. 52 032023

More information

Cavitation instabilities in hydraulic machines

Cavitation instabilities in hydraulic machines IOP Conference Series: Materials Science and Engineering OPEN ACCESS Cavitation instabilities in hydraulic machines To cite this article: Y Tsujimoto 2013 IOP Conf. Ser.: Mater. Sci. Eng. 52 012005 View

More information

ENGINEERING FLUID MECHANICS. CHAPTER 1 Properties of Fluids

ENGINEERING FLUID MECHANICS. CHAPTER 1 Properties of Fluids CHAPTER 1 Properties of Fluids ENGINEERING FLUID MECHANICS 1.1 Introduction 1.2 Development of Fluid Mechanics 1.3 Units of Measurement (SI units) 1.4 Mass, Density, Specific Weight, Specific Volume, Specific

More information

Numerical investigation of solid-liquid two phase flow in a non-clogging centrifugal pump at offdesign

Numerical investigation of solid-liquid two phase flow in a non-clogging centrifugal pump at offdesign IOP Conference Series: Earth and Environmental Science Numerical investigation of solid-liquid two phase flow in a non-clogging centrifugal pump at offdesign conditions To cite this article: B J Zhao et

More information

Application of two turbulence models for computation of cavitating flows in a centrifugal pump

Application of two turbulence models for computation of cavitating flows in a centrifugal pump IOP Conference Series: Materials Science and Engineering OPEN ACCESS Application of two turbulence models for computation of cavitating flows in a centrifugal pump To cite this article: M He et al 2013

More information

STUDY ON TIP LEAKAGE VORTEX IN AN AXIAL FLOW PUMP BASED ON MODIFIED SHEAR STRESS TRANSPORT k-ω TURBULENCE MODEL

STUDY ON TIP LEAKAGE VORTEX IN AN AXIAL FLOW PUMP BASED ON MODIFIED SHEAR STRESS TRANSPORT k-ω TURBULENCE MODEL THERMAL SCIENCE, Year 213, Vol. 17, No. 5, pp. 1551-1555 1551 STUDY ON TIP AKAGE VORX IN AN AXIAL FLOW PUMP BASED ON MODIFIED SHEAR STRE TRANSPORT k-ω TURBUNCE MODEL Introduction by Desheng ZHANG *, Dazhi

More information

Efficient runner safety assessment during early design phase and root cause analysis

Efficient runner safety assessment during early design phase and root cause analysis IOP Conference Series: Earth and Environmental Science Efficient runner safety assessment during early design phase and root cause analysis To cite this article: Q W Liang et al 2012 IOP Conf. Ser.: Earth

More information

Numerical Simulation Analysis of Ultrafine Powder Centrifugal Classifier Bizhong XIA 1, a, Yiwei CHEN 1, b, Bo CHEN 2

Numerical Simulation Analysis of Ultrafine Powder Centrifugal Classifier Bizhong XIA 1, a, Yiwei CHEN 1, b, Bo CHEN 2 5th International Conference on Information Engineering for Mechanics and Materials (ICIMM 2015) Numerical Simulation Analysis of Ultrafine Powder Centrifugal Classifier Bizhong XIA 1, a, Yiwei CHEN 1,

More information

Efficiency improvement and evaluation of a centrifugal pump with vaned diffuser

Efficiency improvement and evaluation of a centrifugal pump with vaned diffuser Research Article Efficiency improvement and evaluation of a centrifugal pump with vaned diffuser Advances in Mechanical Engineering 2019, Vol. 11(3) 1 12 Ó The Author(s) 2019 DOI: 10.1177/1687814019825904

More information

Contents. Preface... xvii

Contents. Preface... xvii Contents Preface... xvii CHAPTER 1 Idealized Flow Machines...1 1.1 Conservation Equations... 1 1.1.1 Conservation of mass... 2 1.1.2 Conservation of momentum... 3 1.1.3 Conservation of energy... 3 1.2

More information

Research on energy conversion mechanism of a screw centrifugal pump under the water

Research on energy conversion mechanism of a screw centrifugal pump under the water IOP Conference Series: Materials Science and Engineering OPEN ACCESS Research on energy conversion mechanism of a screw centrifugal pump under the water To cite this article: H Quan et al 213 IOP Conf.

More information

FLUID CHARACTERISTICS OF ROTARY WING HEAT METER WITH SINGLE-CHANNEL *

FLUID CHARACTERISTICS OF ROTARY WING HEAT METER WITH SINGLE-CHANNEL * 101 2008,20(1):101-107 FLUID CHARACTERISTICS OF ROTARY WING HEAT METER WITH SINGLE-CHANNEL * Du Guang-sheng, Liu Zheng-gang, LI Li, LIU Yong-hui, MA Yong-kun, MENG Liang School of Energy and Power Engineering,Shandong

More information

1806. Dynamic characteristics of centrifugal pump induced by fluid and motor excitation forces

1806. Dynamic characteristics of centrifugal pump induced by fluid and motor excitation forces 1806. Dynamic characteristics of centrifugal pump induced by fluid and motor excitation forces Guofang Nan 1, Eryun Chen 2, Ailing Yang 3 School of Energy and Power Engineering, University of Shanghai

More information

Experimental and numerical simulation studies of the squeezing dynamics of the UBVT system with a hole-plug device

Experimental and numerical simulation studies of the squeezing dynamics of the UBVT system with a hole-plug device Experimental numerical simulation studies of the squeezing dynamics of the UBVT system with a hole-plug device Wen-bin Gu 1 Yun-hao Hu 2 Zhen-xiong Wang 3 Jian-qing Liu 4 Xiao-hua Yu 5 Jiang-hai Chen 6

More information

Numerical calculation for cavitation flow of inducer

Numerical calculation for cavitation flow of inducer IOP Conference Series: Materials Science and Engineering OPEN ACCESS Numerical calculation for cavitation flow of inducer To cite this article: C Ning et al 2015 IOP Conf. Ser.: Mater. Sci. Eng. 72 032025

More information

Numerical Study of Pressure and Velocity Distribution Analysis of Centrifugal Pump

Numerical Study of Pressure and Velocity Distribution Analysis of Centrifugal Pump International Journal of Thermal Technologies, Vol.1, No.1 (Dec. 2011) Research Article Numerical Study of Pressure and Velocity Distribution Analysis of Centrifugal Pump Munish Gupta 1, Satish Kumar 2,

More information

STUDY OF THE PRESSURE DROP FOR RADIAL INFLOW BETWEEN CO-ROTATING DISCS

STUDY OF THE PRESSURE DROP FOR RADIAL INFLOW BETWEEN CO-ROTATING DISCS 28 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES X. YU 1, 2 H. Y. LU 1 J. N. SUN 2 X. LUO 2,* G. Q. XU 2 (1 Shenyang Aeroengine Research Institute, Aviation Industry Corporation of China, Shenyang,

More information

Introduction to Fluid Machines and Compressible Flow Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur

Introduction to Fluid Machines and Compressible Flow Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Introduction to Fluid Machines and Compressible Flow Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Lecture - 1 Introduction to Fluid Machines Well, good

More information

Influence of Chord Lengths of Splitter Blades on Performance of Small Axial Flow Fan

Influence of Chord Lengths of Splitter Blades on Performance of Small Axial Flow Fan Send Orders for Reprints to reprints@benthamscience.ae The Open Mechanical Engineering Journal, 2015, 9, 361-370 361 Open Access Influence of Chord Lengths of Splitter Blades on Performance of Small Axial

More information

Analysis of Rotor-Stator Interaction in Turbine Mode of a Pump-Turbine Model

Analysis of Rotor-Stator Interaction in Turbine Mode of a Pump-Turbine Model Journal of Applied Fluid Mechanics, Vol. 9, No. 5, pp. 2559-2568, 2016. Available online at www.jafmonline.net, ISSN 1735-3572, EISSN 1735-3645. DOI: 10.18869/acadpub.jafm.68.236.25086 Analysis of Rotor-Stator

More information

ROTATING MACHINERY Dynamics

ROTATING MACHINERY Dynamics ROTATING MACHINERY Dynamics Proceedings of the Third International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-3) Edited by J. H. Kim Electric Power Research Institute

More information

Investigation on fluid added mass effect in the modal response of a pump-turbine runner

Investigation on fluid added mass effect in the modal response of a pump-turbine runner IOP Conference Series: Materials Science and Engineering OPEN ACCESS Investigation on fluid added mass effect in the modal response of a pump-turbine runner To cite this article: L Y He et al 2013 IOP

More information

Effect of a blade shape on hydraulic and mechanical properties of a single - blade impeller

Effect of a blade shape on hydraulic and mechanical properties of a single - blade impeller Effect of a blade shape on hydraulic and mechanical properties of a single - blade impeller Matej Kurilla 1,*, Branislav Knížat 1, Zoltán Csuka 1, and Maroš Hyriak 1 Slovak University of Technology in

More information

Article Energy Performance and Flow Patterns of a Mixed- Flow Pump with Different Tip Clearance Sizes

Article Energy Performance and Flow Patterns of a Mixed- Flow Pump with Different Tip Clearance Sizes Article Energy Performance and Flow Patterns of a Mixed- Flow Pump with Different Tip Clearance Sizes Yabin Liu, Lei Tan *, Yue Hao and Yun Xu State Key Laboratory of Hydroscience and Engineering, Tsinghua

More information

Relationship between Cavitation Incipient and NPSH Characteristic for Inverter Drive Centrifugal Pumps

Relationship between Cavitation Incipient and NPSH Characteristic for Inverter Drive Centrifugal Pumps 1) 논문 Original Paper DOI: http://dx.doi.org/10.5293/kfma.2015.18.6.076 ISSN (Print): 2287-9706 Relationship between Cavitation Incipient and NPSH Characteristic for Inverter Drive Centrifugal Pumps Md

More information

Department of Civil and Environmental Engineering CVNG 1001: Mechanics of Fluids

Department of Civil and Environmental Engineering CVNG 1001: Mechanics of Fluids INTRODUCTION Hydrodynamic Machines A hydromachine is a device used either for extracting energy from a fluid or to add energy to a fluid. There are many types of hydromachines and Figure 1 below illustrates

More information

1415. Effects of different disc locations on oil-film instability in a rotor system

1415. Effects of different disc locations on oil-film instability in a rotor system 1415. Effects of different disc locations on oil-film instability in a rotor system Hui Ma 1, Xueling Wang 2, Heqiang Niu 3, Hui Li 4 School of Mechanical Engineering and Automation, Northeastern University,

More information

Research Article Evaluation of Flow-Induced Dynamic Stress and Vibration of Volute Casing for a Large-Scale Double-Suction Centrifugal Pump

Research Article Evaluation of Flow-Induced Dynamic Stress and Vibration of Volute Casing for a Large-Scale Double-Suction Centrifugal Pump Mathematical Problems in Engineering Volume 213, Article ID 764812, 9 pages http://dx.doi.org/1.1155/213/764812 Research Article Evaluation of Flow-Induced Dynamic Stress and Vibration of Volute Casing

More information

Coupling Heat Structure Analysis of the Clutch Pressure Plate in Vehicle Overloaded Start Procession

Coupling Heat Structure Analysis of the Clutch Pressure Plate in Vehicle Overloaded Start Procession Sensors & Transducers 2014 by IFSA Publishing, S. L. http://www.sensorsportal.com Coupling Heat Structure Analysis of the Clutch Pressure Plate in Vehicle Overloaded Start Procession Qi-Tang WANG, Mao-Tao

More information

Interaction of impeller and guide vane in a seriesdesigned

Interaction of impeller and guide vane in a seriesdesigned IOP Conference Series: Earth and Environmental Science Interaction of impeller and guide vane in a seriesdesigned axial-flow pump To cite this article: S Kim et al 212 IOP Conf. Ser.: Earth Environ. Sci.

More information

The effect of rotational speed variation on the static pressure in the centrifugal pump (part 1)

The effect of rotational speed variation on the static pressure in the centrifugal pump (part 1) IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 8, Issue 6 (Sep. - Oct. 2013), PP 83-94 The effect of rotational speed variation on the static pressure

More information

CHAPTER EIGHT P U M P I N G O F L I Q U I D S

CHAPTER EIGHT P U M P I N G O F L I Q U I D S CHAPTER EIGHT P U M P I N G O F L I Q U I D S Pupmps are devices for supplying energy or head to a flowing liquid in order to overcome head losses due to friction and also if necessary, to raise liquid

More information

High head pump-turbine: Pumping mode numerical simulations with a cavitation model for off-design conditions

High head pump-turbine: Pumping mode numerical simulations with a cavitation model for off-design conditions IOP Conference Series: Earth and Environmental Science OPEN ACCESS High head pump-turbine: Pumping mode numerical simulations with a cavitation model for off-design conditions To cite this article: U Jese

More information

ANALYSIS AND DEVELOPMENT OF A TURBIVO COMPRESSOR FOR MVR APPLICATIONS. Abstract 1. INTRODUCTION

ANALYSIS AND DEVELOPMENT OF A TURBIVO COMPRESSOR FOR MVR APPLICATIONS. Abstract 1. INTRODUCTION 1275, Page 1 ANALYSIS AND DEVELOPMENT OF A TURBIVO COMPRESSOR FOR MVR APPLICATIONS Elias BOULAWZ KSAYER, Denis CLODIC Center for Energy and Processes, Ecole des Mines de Paris 60, boulevard Saint Michel

More information

Internal Flow Measurements of Turbomachinery using PIV

Internal Flow Measurements of Turbomachinery using PIV Internal Flow Measurements of Turbomachinery using PIV OHUCHIDA Satoshi : Turbo Machinery and Engine Technology Department, Products Development Center, Corporate Research & Development TAMAKI Hideaki

More information

Introduction to Fluid Machines, and Compressible Flow Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur

Introduction to Fluid Machines, and Compressible Flow Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Introduction to Fluid Machines, and Compressible Flow Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Lecture - 09 Introduction to Reaction Type of Hydraulic

More information

DYNAMIC STRESS MEASUREMENT OF CENTRIFUGAL COMPRESSOR IMPELLER AND STUDY FOR STRENGTH CRITERIA BASED ON CORRELATION BY UNSTEADY CFD

DYNAMIC STRESS MEASUREMENT OF CENTRIFUGAL COMPRESSOR IMPELLER AND STUDY FOR STRENGTH CRITERIA BASED ON CORRELATION BY UNSTEADY CFD DYNAMIC STRESS MEASUREMENT OF CENTRIFUGAL COMPRESSOR IMPELLER AND STUDY FOR STRENGTH CRITERIA BASED ON CORRELATION BY UNSTEADY CFD by Atsushi Higashio Senior Engineer Hiroyuki Yamashita Research Engineer

More information

Experimental and CFD analysis for prediction of vortex and swirl angle in the pump sump station model

Experimental and CFD analysis for prediction of vortex and swirl angle in the pump sump station model IOP Conference Series: Materials Science and Engineering OPEN ACCESS Experimental and CFD analysis for prediction of vortex and swirl angle in the pump sump station model To cite this article: C G Kim

More information

Performance Analysis and Design of Vertical Axis Tidal Stream Turbine

Performance Analysis and Design of Vertical Axis Tidal Stream Turbine Journal of Shipping and Ocean Engineering 2 (2012) 191-200 D DAVID PUBLISHING Performance Analysis and Design of Vertical Axis Tidal Stream Turbine Beom-Soo Hyun, Da-Hye Choi, Jun-Seon Han and Ji-Yuan

More information

Numerical Simulation of Flow Field in a Elliptic Bottom Stirred Tank with Bottom Baffles

Numerical Simulation of Flow Field in a Elliptic Bottom Stirred Tank with Bottom Baffles Numerical Simulation of Flow Field in a Elliptic Bottom Stirred Tank with Bottom Baffles Liu Xuedong, Liu Zhiyan Abstract When the crisscross baffles and logarithmic spiral baffles are placed on the bottom

More information

Performance Investigation of High Pressure Ratio Centrifugal Compressor using CFD

Performance Investigation of High Pressure Ratio Centrifugal Compressor using CFD International Journal of Ignited Minds (IJIMIINDS) Performance Investigation of High Pressure Ratio Centrifugal Compressor using CFD Manjunath DC a, Rajesh b, Dr.V.M.Kulkarni c a PG student, Department

More information

FLOW PATTERN STUDY OF A CENTRIFUGAL PUMP USING CFD METHODS CONCENTRATING ON VOLUTE TONGUE ROLE

FLOW PATTERN STUDY OF A CENTRIFUGAL PUMP USING CFD METHODS CONCENTRATING ON VOLUTE TONGUE ROLE FLOW PATTERN STUDY OF A CENTRIFUGAL PUMP USING CFD METHODS CONCENTRATING ON VOLUTE TONGUE ROLE N. Pourmahmoud and S. Majid Taleby Faculty of Engineering, Urmia University, Urmia, Iran E-Mail: majid.taleby@gmail.com

More information

COURSE CODE : 3072 COURSE CATEGORY : B PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE

COURSE CODE : 3072 COURSE CATEGORY : B PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE COURSE TITLE : FLUID MECHANICS COURSE CODE : 307 COURSE CATEGORY : B PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE MODULE TOPIC PERIOD 1 Properties of Fluids 0 Fluid Friction and Flow

More information

1439. Numerical simulation of the magnetic field and electromagnetic vibration analysis of the AC permanent-magnet synchronous motor

1439. Numerical simulation of the magnetic field and electromagnetic vibration analysis of the AC permanent-magnet synchronous motor 1439. Numerical simulation of the magnetic field and electromagnetic vibration analysis of the AC permanent-magnet synchronous motor Bai-zhou Li 1, Yu Wang 2, Qi-chang Zhang 3 1, 2, 3 School of Mechanical

More information

NUMERICAL INVESTIGATION OF PERFORMANCE OF KAPLAN TURBINE WITH DRAFT TUBE

NUMERICAL INVESTIGATION OF PERFORMANCE OF KAPLAN TURBINE WITH DRAFT TUBE NUMERICAL INVESTIGATION OF PERFORMANCE OF KAPLAN TURBINE WITH DRAFT TUBE Mohamed Adel and Nabil H. Mostafa ABSTRACT Mechanical Power Engineering Department, Engineering Faculty Zagazig University, Zagazig,

More information

Dynamic Simulation in Guide Vane Opening Process of a Pump-Turbine in Pump Mode

Dynamic Simulation in Guide Vane Opening Process of a Pump-Turbine in Pump Mode Dynamic Simulation in Guide Vane Opening Process of a Pump-Turbine in Pump Mode L. Han 1, H J. Wang 1, Y H. Gao 1, D Y. Li 1, R Z. Gong 1, and X Z. Wei 2 1 School of Energy Science and Engineering, Harbin

More information

In this lecture... Radial flow turbines Types of radial flow turbines Thermodynamics and aerodynamics Losses in radial flow turbines

In this lecture... Radial flow turbines Types of radial flow turbines Thermodynamics and aerodynamics Losses in radial flow turbines Lect- 35 1 In this lecture... Radial flow turbines Types of radial flow turbines Thermodynamics and aerodynamics Losses in radial flow turbines Radial turbines Lect-35 Development of radial flow turbines

More information

Effect of Reflux Hole on the Transient Flow Characteristics of the Self-Priming Sewage Centrifugal Pump

Effect of Reflux Hole on the Transient Flow Characteristics of the Self-Priming Sewage Centrifugal Pump Journal of Applied Fluid Mechanics, Vol. 12, No. 3, pp. 689-699, 2019. Available online at www.jafmonline.net, ISSN 1735-3645, EISSN 1735-3645. DOI: 10.29252/jafm.12.03.29207 Effect of Reflux Hole on the

More information

Research Article Numerical Flow Simulation in a Centrifugal Pump at Design and Off-Design Conditions

Research Article Numerical Flow Simulation in a Centrifugal Pump at Design and Off-Design Conditions Rotating Machinery Volume, Article ID 841, 8 pages doi:1.15//841 Research Article Numerical Flow Simulation in a Centrifugal Pump at Design and Off-Design Conditions K. W. Cheah, T. S. Lee, S. H. Winoto,

More information

Study on the Performance of a Sirocco Fan (Flow Around the Runner Blade)

Study on the Performance of a Sirocco Fan (Flow Around the Runner Blade) Rotating Machinery, 10(5): 415 424, 2004 Copyright c Taylor & Francis Inc. ISSN: 1023-621X print / 1542-3034 online DOI: 10.1080/10236210490474629 Study on the Performance of a Sirocco Fan (Flow Around

More information

Simulation and Experimental Research on Dynamics of Low-Pressure Rotor System in Turbofan Engine

Simulation and Experimental Research on Dynamics of Low-Pressure Rotor System in Turbofan Engine Simulation and Experimental Research on Dynamics of Low-Pressure Rotor System in Turbofan Engine Shengxiang Li 1, Chengxue Jin 2, Guang Zhao 1*, Zhiliang Xiong 1, Baopeng Xu 1 1. Collaborative Innovation

More information

Principles of Turbomachinery

Principles of Turbomachinery Principles of Turbomachinery To J. M. T. Principles of Turbomachinery R. K. Turton Lecturer in Mechanical Engineering Loughborough University of Technology London New York E. & F. N. Spon ISBN 978-94-010-9691-1

More information

1544. Synchronous and subsynchronous vibration under the combined effect of bearings and seals: numerical simulation and its experimental validation

1544. Synchronous and subsynchronous vibration under the combined effect of bearings and seals: numerical simulation and its experimental validation 1544. Synchronous and subsynchronous vibration under the combined effect of bearings and seals: numerical simulation and its experimental validation Wanfu Zhang 1, Jiangang Yang 2, Chun Li 3, Ren Dai 4,

More information

Aerodynamic loading acting on the stator vane in the variable nozzle turbine flow

Aerodynamic loading acting on the stator vane in the variable nozzle turbine flow Applied and Computational Mechanics 9 (2015) 79 95 Aerodynamic loading acting on the stator vane in the variable nozzle turbine flow M. Žatko a, a Faculty of Mechanical Engineering, University of Technology

More information

Numerical Prediction Of Torque On Guide Vanes In A Reversible Pump-Turbine

Numerical Prediction Of Torque On Guide Vanes In A Reversible Pump-Turbine Journal of Multidisciplinary Engineering Science and Technology (JMEST) ISSN: 3159 Vol. 2 Issue 6, June - 215 Numerical Prediction Of Torque On Guide Vanes In A Reversible Pump-Turbine Turbine and pump

More information

Effects of the Leakage Flow Tangential Velocity in Shrouded Axial Compressor Cascades *

Effects of the Leakage Flow Tangential Velocity in Shrouded Axial Compressor Cascades * TSINGHUA SCIENCE AND TECHNOLOGY ISSNll1007-0214ll21/21llpp105-110 Volume 14, Number S2, December 2009 Effects of the Leakage Flow Tangential Velocity in Shrouded Axial Compressor Cascades * KIM Jinwook

More information

Vortex cavitation and oscillation in a doublesuction

Vortex cavitation and oscillation in a doublesuction IOP Conference Series: Earth and Environmental Science Vortex cavitation and oscillation in a doublesuction volute pump To cite this article: T Sato et al 2010 IOP Conf. Ser.: Earth Environ. Sci. 12 012019

More information

Dr. S. Ramachandran Prof. R. Devaraj. Mr. YVS. Karthick AIR WALK PUBLICATIONS

Dr. S. Ramachandran Prof. R. Devaraj. Mr. YVS. Karthick AIR WALK PUBLICATIONS Fluid Machinery As per Revised Syllabus of Leading Universities including APJ ABDUL KALAM TECHNOLOGICAL UNIVERSITY Dr. S. Ramachandran Prof. R. Devaraj Professors School of Mechanical Engineering Sathyabama

More information

SAMCEF For ROTORS. Chapter 1 : Physical Aspects of rotor dynamics. This document is the property of SAMTECH S.A. MEF A, Page 1

SAMCEF For ROTORS. Chapter 1 : Physical Aspects of rotor dynamics. This document is the property of SAMTECH S.A. MEF A, Page 1 SAMCEF For ROTORS Chapter 1 : Physical Aspects of rotor dynamics This document is the property of SAMTECH S.A. MEF 101-01-A, Page 1 Table of Contents rotor dynamics Introduction Rotating parts Gyroscopic

More information

Improved Model for Meanline Analysis of Centrifugal Compressors with a Large Tip Clearance

Improved Model for Meanline Analysis of Centrifugal Compressors with a Large Tip Clearance Improved Model for Meanline Analysis of Centrifugal Compressors with a Large Tip Clearance Andrey Sherbina 1, Ivan Klimov 2 and Leonid Moroz 3 SoftInWay Inc., 1500 District Avenue, Burlington, MA, 01803,

More information

Strength analysis on load rejection working condition of steam turbine

Strength analysis on load rejection working condition of steam turbine Strength analysis on load rejection working condition of steam turbine WANG Gongyi, CHENG Kai, YANG Jiandao, YU Deqi, GU Luyin, PENG Zeying Shanghai Turbine Works Co., Ltd., Shanghai 201612, China Abstract:

More information

Application of Computational Fluid Dynamics to Practical Design and Performance Analysis of Turbomachinery

Application of Computational Fluid Dynamics to Practical Design and Performance Analysis of Turbomachinery 10 Application of Computational Fluid Dynamics to Practical Design and Performance Analysis of Turbomachinery Hyoung Woo OH Chungju National University Korea 1. Introduction Over the past several decades,

More information

Rotating Liner Hanger Bearing Frictional Heat Field and Thermalmechanical Coupling Simulation. Haiqiang Sun1, a *

Rotating Liner Hanger Bearing Frictional Heat Field and Thermalmechanical Coupling Simulation. Haiqiang Sun1, a * International Conference on Manufacturing Science and Engineering (ICMSE 2015) Rotating Liner Hanger Bearing Frictional Heat Field and Thermalmechanical Coupling Simulation Haiqiang Sun1, a * 1 China university

More information

CFD Analysis of Centrifugal Pump in Sewerage System

CFD Analysis of Centrifugal Pump in Sewerage System CFD Analysis of Centrifugal Pump in Sewerage System J. Beston 1, G. Gopi 1, S. Gopi 1, M. Karthika 1, Dr. S. V. Suresh Babu 2 1 Department of Mechanical Engineering, Adhiyamaan College of Engineering,

More information

Bearing fault diagnosis based on Shannon entropy and wavelet package decomposition

Bearing fault diagnosis based on Shannon entropy and wavelet package decomposition Bearing fault diagnosis based on Shannon entropy and wavelet package decomposition Hong Mei Liu 1, Chen Lu, Ji Chang Zhang 3 School of Reliability and Systems Engineering, Beihang University, Beijing 1191,

More information

Influence of friction coefficient on rubbing behavior of oil bearing rotor system

Influence of friction coefficient on rubbing behavior of oil bearing rotor system Influence of friction coefficient on rubbing behavior of oil bearing rotor system Changliang Tang 1, Jinfu ang 2, Dongjiang Han 3, Huan Lei 4, Long Hao 5, Tianyu Zhang 6 1, 2, 3, 4, 5 Institute of Engineering

More information

Vibration and Modal Analysis of Small Induction Motor Yan LI 1, a, Jianmin DU 1, b, Jiakuan XIA 1

Vibration and Modal Analysis of Small Induction Motor Yan LI 1, a, Jianmin DU 1, b, Jiakuan XIA 1 International Conference on Advances in Mechanical Engineering and Industrial Informatics (AMEII 215) Vibration and Modal Analysis of Small Induction Motor Yan LI 1, a, Jianmin DU 1, b, Jiakuan XIA 1 1

More information

Strength Study of Spiral Flexure Spring of Stirling Cryocooler

Strength Study of Spiral Flexure Spring of Stirling Cryocooler Sensors & Transducers 2013 by IFSA http://www.sensorsportal.com Strength Study of Spiral of Stirling Cryocooler WANG Wen-Rui, NIE Shuai, ZHANG Jia-Ming School of Mechanical Engineering, University of Science

More information

In this lecture... Centrifugal compressors Thermodynamics of centrifugal compressors Components of a centrifugal compressor

In this lecture... Centrifugal compressors Thermodynamics of centrifugal compressors Components of a centrifugal compressor Lect- 3 In this lecture... Centrifugal compressors Thermodynamics of centrifugal compressors Components of a centrifugal compressor Centrifugal compressors Centrifugal compressors were used in the first

More information

Design optimization of a centrifugal pump impeller and volute using computational fluid dynamics

Design optimization of a centrifugal pump impeller and volute using computational fluid dynamics IOP Conference Series: Earth and Environmental Science Design optimization of a centrifugal pump impeller and volute using computational fluid dynamics To cite this article: J H Kim et al 2012 IOP Conf.

More information

Bearing fault diagnosis based on TEO and SVM

Bearing fault diagnosis based on TEO and SVM Bearing fault diagnosis based on TEO and SVM Qingzhu Liu, Yujie Cheng 2 School of Reliability and Systems Engineering, Beihang University, Beijing 9, China Science and Technology on Reliability and Environmental

More information

Effect of modification to tongue and basic circle diameter on vibration in a double-suction centrifugal pump

Effect of modification to tongue and basic circle diameter on vibration in a double-suction centrifugal pump 5th International Conference on Information Engineering for Mechanics and Materials (ICIMM 2015) Effect of modification to tongue and basic circle diameter on vibration in a double-suction centrifugal

More information

Experimental Studies for Visualization of Flow with Boundary Layers in an Axial Compressor Fan Inlet using Pressure Probes

Experimental Studies for Visualization of Flow with Boundary Layers in an Axial Compressor Fan Inlet using Pressure Probes Indian Journal of Science and Technology, Vol 9(45), DOI: 10.17485/ijst/2016/v9i45/104694, December 2016 ISSN (Print) : 0974-6846 ISSN (Online) : 0974-5645 Experimental Studies for Visualization of Flow

More information

Numerical Study of the Semi-Open Centrifugal Pump Impeller Side Clearance A. Farid Ayad *, H. M. Abdalla,A. S. Abo El-Azm Egyptian Armed Forces, Egypt

Numerical Study of the Semi-Open Centrifugal Pump Impeller Side Clearance A. Farid Ayad *, H. M. Abdalla,A. S. Abo El-Azm Egyptian Armed Forces, Egypt 16 th International Conference on AEROSPACE SCIENCES & AVIATION TECHNOLOGY, ASAT - 16 May 26-28, 2015, E-Mail: asat@mtc.edu.eg Military Technical College, Kobry Elkobbah, Cairo, Egypt Tel : +(202) 24025292

More information

Flow field distribution of liquid film of water lubricated bearing-rotor coupling systems

Flow field distribution of liquid film of water lubricated bearing-rotor coupling systems IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Flow field distribution of liquid film of water lubricated bearing-rotor coupling systems To cite this article: Q L Hu et al 2016

More information

(Refer Slide Time: 4:41)

(Refer Slide Time: 4:41) Fluid Machines. Professor Sankar Kumar Som. Department Of Mechanical Engineering. Indian Institute Of Technology Kharagpur. Lecture-30. Basic Principle and Energy Transfer in Centrifugal Compressor Part

More information

chinaxiv: v1

chinaxiv: v1 Journal of Thermal Science Vol.6, No.1 (017) 18 4 DOI: 10.1007/s11630-017-0904-0 Article ID: 1003-169(017)01-0018-07 Numerical Study of Unsteady Flows with Cavitation in a High-Speed Micro Centrifugal

More information

Study on the Numerical Simulation of the Flow of Splitter Blade Impeller

Study on the Numerical Simulation of the Flow of Splitter Blade Impeller Study on the Numerical Simulation of the Flow of Splitter Blade Impeller Long Shao, Xinli Wei 2,*, Xinling Ma 2, Xiangrui Meng 2 School of Chemical Engineering and Energy Zhengzhou University, 45000 Zhengzhou,

More information

ROTATING MACHINERY VIBRATION

ROTATING MACHINERY VIBRATION SECOND EDITION ROTATING MACHINERY VIBRATION From Analysis to Troubleshooting MAURICE L. ADAMS, JR Case Western Reserve University Cleveland, Ohio W^ C\ CRC Press У Taylor &. Francis Group Boca Raton London

More information

Electronic Supplementary Information

Electronic Supplementary Information Electronic Supplementary Material (ESI) for Journal of Materials Chemistry A. This journal is The Royal Society of Chemistry 2017 Electronic Supplementary Information Cation exchange MOF-derived nitrogen-doped

More information

Study of Flow Instability in a Miniature Centrifugal Pump Based on Energy Gradient Method

Study of Flow Instability in a Miniature Centrifugal Pump Based on Energy Gradient Method Journal of Applied Fluid Mechanics, Vol. 12, No. 3, pp. 701-713, 2019. Available online at www.jafmonline.net, ISSN 1735-3645, EISSN 1735-3645. DOI: 10.29252/jafm.12.03.28662 Study of Flow Instability

More information

THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS Three Perk Avenue, New YoriL N.Y Institute of Turbomachinery

THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS Three Perk Avenue, New YoriL N.Y Institute of Turbomachinery THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS Three Perk Avenue, New YoriL N.Y. 100164990 99-GT-103 The Society shall not be responsible for statements or opinions advanced in papers or discussion at meetings

More information

Numerical Simulation of Rocket Engine Internal Flows

Numerical Simulation of Rocket Engine Internal Flows Numerical Simulation of Rocket Engine Internal Flows Project Representative Masao Furukawa Authors Taro Shimizu Nobuhiro Yamanishi Chisachi Kato Nobuhide Kasagi Institute of Space Technology and Aeronautics,

More information

Investigation of hydraulic performance in an axial-flow blood pump with different guide vane outlet angle

Investigation of hydraulic performance in an axial-flow blood pump with different guide vane outlet angle Research Article Investigation of hydraulic performance in an axial-flow blood pump with different guide vane outlet angle Advances in Mechanical Engineering 2017, Vol. 9(8) 1 11 Ó The Author(s) 2017 DOI:

More information

Engineering Failure Analysis

Engineering Failure Analysis Engineering Failure Analysis 23 (2012) 27 34 Contents lists available at SciVerse ScienceDirect Engineering Failure Analysis journal homepage: www.elsevier.com/locate/engfailanal Failure investigation

More information

Unsteady Leakage Flow Through Axial Clearance of an ORC Scroll Expander

Unsteady Leakage Flow Through Axial Clearance of an ORC Scroll Expander Available online at www.sciencedirect.com ScienceDirect Energy Procedia 00 (2017) 000 000 www.elsevier.com/locate/procedia IV International Seminar on ORC Power Systems, ORC2017 13-15 September 2017, Milano,

More information

Self-floating nanostructural Ni-NiO x /Ni foam for solar thermal water evaporation

Self-floating nanostructural Ni-NiO x /Ni foam for solar thermal water evaporation Electronic Supplementary Material (ESI) for Journal of Materials Chemistry A. This journal is The Royal Society of Chemistry 2019 The supporting information for Self-floating nanostructural Ni-NiO x /Ni

More information

Li Ren Wuhan University of Technology, WuHan , HuBei China

Li Ren Wuhan University of Technology, WuHan , HuBei China doi:10.21311/001.3.3.43 Application of ANSYS on Screw Type Air Compressor Structure System in Dynamic Optimization Li Ren Wuhan University of Technology, WuHan 430070, HuBei China Abstract The mechanical

More information

Performance characteristics of turbo blower in a refuse collecting system according to operation conditions

Performance characteristics of turbo blower in a refuse collecting system according to operation conditions Journal of Mechanical Science and Technology 22 (2008) 1896~1901 Journal of Mechanical Science and Technology www.springerlink.com/content/1738-494x DOI 10.1007/s12206-008-0729-6 Performance characteristics

More information

Analysis of cavitation behaviour in a centrifugal pump

Analysis of cavitation behaviour in a centrifugal pump IOP Conference Series: Earth and Environmental Science Analysis of cavitation behaviour in a centrifugal pump To cite this article: M He et al 2012 IOP Conf. Ser.: Earth Environ. Sci. 15 062022 View the

More information

Nonlinear Controller Design of the Inverted Pendulum System based on Extended State Observer Limin Du, Fucheng Cao

Nonlinear Controller Design of the Inverted Pendulum System based on Extended State Observer Limin Du, Fucheng Cao International Conference on Automation, Mechanical Control and Computational Engineering (AMCCE 015) Nonlinear Controller Design of the Inverted Pendulum System based on Extended State Observer Limin Du,

More information

Cavitations Analysis on Impeller Blades of Thai-made Irrigation Pump by Computational Fluid Dynamic technique

Cavitations Analysis on Impeller Blades of Thai-made Irrigation Pump by Computational Fluid Dynamic technique Cavitations Analysis on Impeller Blades of Thai-made Irrigation Pump by Computational Fluid Dynamic technique Benya Kasantikul 1 and Santi Laksitanonta 2 1 Department of Mechanical Engineering, Faculty

More information