High purity acids and bases
|
|
- Jodie Richardson
- 5 years ago
- Views:
Transcription
1 High purity acids and bases acids and bases Ultrapur acids The life science business of Merck KGaA, Darmstadt, Germany operates as MilliporeSigma in the U.S. and Canada.
2 High purity acids and bases, and Ultrapur acids High purity acids and bases acids and bases Ultrapur acids Digestion with acids is often used during sample preparation. The reagents for sample preparation have an important impact on the outcome of the measurement. In modern instrumental trace analysis any impurity can disturb the measurement. Acids with low impurities should be used to minimize the interference on the instrument signal. High purity acids and bases acids and bases and Ultrapur acids offer the most suitable purity of wet digestion materials and they have low impurities during the entiry minimum shelf life. Advantages Choose your purity grade for instrumental trace analysis acids filled in borosilicate glass or extra pure HDPE material Ultrapur acids filled in s Certificate of Analysis gives an extensive impurity profile Quality grades for your individual needs 2
3 Different grades to meet your needs Take a look at our high purity material for wet digestion acids and bases and Ultrapur acids, especially for instrumental trace analysis whenever you are using an acid, you have to consider your application, your target and of course your budget. Each application is different and therefore we offer a wide range of acids in different grades and many different packaging sizes and materials. Ultrapur acids High purity acids, hydrogen peroxide Highly sophisticated instrumental ultra-trace analysis, e.g. ICP-MS Specified parameters in ppt range acids and bases High purity acids and bases Highly sophisticated instrumental trace analysis, e.g. AAS and ICP-OES Specified parameters in ppb range 3
4 High purity acids and bases, and Ultrapur acids Reagents for wet digestion The more sensitive the instrumental detection becomes, the more important it is to use highly pure reagents. We provide a whole range of high purity reagents that meet the demands of modern instrumental analysis. During the sample preparation it is important to know the blank values of the reagents. On the certificate you find the specification and actual batch values of the parameters. acids and bases are suitable for trace analysis in the ng/g (ppb) range. acids are filled in borosilicate or extra pure s. The material minimizes any elemental impurity of the acid, so the specification of the unopened bottle is kept during the minimum shelf life. The bottles are cleaned and pre-conditioned before filling. Quality control is done after filling. This gives you the assurance that the certified batch values are those values of the filled acid. reagents are packed in a stable outer-box. Hydrogen peroxide acids & bases are packed in a black bottle to protect it against light. The bottle is made of extra pure PE material to avoid any contamination. To make it more safe for you: hydrogen peroxide bottles are closed with the SafetyCap. The SafetyCap with the PTFE membrane releases the pressure, but avoids any contamination. Ultrapur acids are preferred for ultra-trace analysis in the pg/g (ppt) range. Ultrapur reagents are produced by subboiling distillation. The slowly distilled reagents subsequently have the lowest possible trace-impurities. Ultrapur reagents are exclusively filled in pre-conditioned PFA (fluorpolymer) bottles. This material meets the highest demands of all users for ultratrace instrumental analysis, e.g. ICP-MS. Ultrapur reagents are packed in a stable outer-box. 4
5 Ordering information acids and bases Designation Content Packaging Acetic acid 100% Ammonia solution 25% Boric acid Formic acid % Hydrobromic acid 47% Hydrochloric acid 30% Hydrofluoric acid 40% Hydrogen peroxide 30% 50 g 500 g Nitric acid 65% Oxalic acid dihydrate Perchloric acid 70% Ortho- Phosphoric acid 85% Sodium hydroxide solution 30% HDPE dosage bottle 1 HDPE dosage bottle 1 with SafetyCap 2 with SafetyCap 2 with SafetyCap 2 Fisher Scientific Cat. No. M M M M M M M M M M M M M M M M M M M M M M M M M g M Sulphuric acid 96% M M M M M M M M M M M Ordering information Ultrapur acids Designation Content Packaging Hydrochloric acid 30% Ultrapur Hydrogen peroxide 31% Ultrapur Nitric acid 60% Ultrapur Sulphuric acid 96% Ultrapur Water Ultrapur Fisher Scientific Cat. No. M M M M M M M M M M High purity acids and bases 1 : See product details on page 6 2 : See product details on page 7 5
6 High purity acids and bases, and Ultrapur acids HDPE dosage bottle for hydrofluoric acid Hydrofluoric acid Hydrofluoric acid is one of the most dangerous acids. Even small quantities can cause severe injuries and poisoning. To avoid such fatal accidents, we developed a pouring aid that is specially suited to the characteristics of hydrofluoric acid. All 250 and bottles are provided with this innovative and safe pouring aid. It allows drop-by-drop withdrawal of the acid and the last drop stays reliably in the bottle. Furthermore, our exclusive S40 closure system ensures that the bottle is completely airtight. HDPE dosage bottle 250 and bottle with a withdrawal system especially constructed for this hazardous acid (Fisher Scientific Cat. No.: M and M ) Allows drop-by-drop withdrawal and the last drop stays reliably in the bottle Special density function of our exclusive S40 screwing system Allows transportation and storage in cardboard boxes 6
7 SafetyCap Leakproof against liquids allows excess pressure to be released Hydrogen peroxide is capable of generating excess pressure through chemical reactions and is therefore supplied in bottles with a special screw cap. This cap has a valve that allows the gas formed to be released, hence preventing the build-up of pressure. For safety purposes, these bottles are additionally packaged in a PE bag. SafetyCap the intelligent closure In order to completely avoid contamination, we supply all such reagents fitted with the SafetyCap. This innovative cap allows absolutely no reagent to leak even if the bottle is tipped. The PTFE membrane sintered onto the inside of the cap allows gas to be released but is absolutely leakproof against liquids. This has been proven in numerous warehouse and stress tests at our package testing facility at all temperatures and in all positions. SafetyCap Allows gas to be released and the internal pressure to be decreased Allows no liquid to escape, thus protecting the environment from contamination Fisher Scientific Cat. No.: M , M and M High purity acids and bases 7
8 fishersci.com/milliporesigma 2018 Merck KGaA, Darmstadt, Germany and/or its affiliates. All Rights Reserved. MilliporeSigma, the vibrant M, and Suprapur are trademarks of Merck KGaA, Darmstadt, Germany or its affiliates. All other trademarks are the property of their respective owners. Detailed information on trademarks is available via publicly accessible resources. Fisher Scientific Lit. No. BN /2018
Basic Digestion Principles
Basic Digestion Principles 1 From Samples to Solutions Direct Analytical Method Solid Sample Problems: Mech. Sample Preparation (Grinding, Sieving, Weighing, Pressing, Polishing,...) Solid Sample Autosampler
More informationSpillSolv. Chemical Spill Treatment Kits
SpillSolv Chemical Spill Treatment Kits Features & Benefits Compe SpillSolv Chemical Spill Treatment Kits EMD Chemicals offers the next generation in spill cleanup technology. SpillSolv Chemical Treatment
More informationDetermination of trace anions in concentrated hydrofluoric acid
APPLICATION NOTE 78 Determination of trace anions in concentrated hydrofluoric acid Authors Archava Siriraks Thermo Fisher Scientific, Sunnyvale, CA Keywords HF, ICS-5000 +, IonPac AS10, IonPac AC10, ion
More informationEppendorf UVette. Instructions for use
Instructions for use Instructions Eppendorf see Fig. Tab. p. p. UVette for use Copyright 2014 Eppendorf AG, Hamburg, Germany. All rights reserved, including graphics and images. No part of this publication
More informationSample Analysis Design. Solution Mode
Sample Analysis Design Solution Mode Step I Sample preparation The quality of your data will only be as good as the quality of your sample i.e. did you adequately prepare your sample in the clean lab?
More informationFerroZine Method 1 Method to 100 µg/l Fe (10-cm cell) Reagent Solution. Instrument Adapter Sample cell DR 6000 LZV
Iron, Total DOC316.53.01338 FerroZine Method 1 Method 10264 1 to 100 µg/l Fe (10-cm cell) Reagent Solution Scope and application: For ultrapure water. 1 Adapted from Stookey, L.L., Anal. Chem., 42(7),
More informationFlk = Acy + Cy z. Discover the perfect formula Fluka Reagents. Fluka TM Accuracy Consistency AUTHENTIC
Flk = Acy + Cy z Fluka TM Accuracy Consistency QUALITY ASSURED AUTHENTIC BY HONEYWELL Discover the perfect formula Fluka Reagents Honeywell now delivers Fluka premium grade inorganic reagents worldwide
More informationWATER. Brighter. Determination. Aquastar reagents for brilliant Karl Fischer titration results.
Brighter WATER Determination Aquastar reagents for brilliant Karl Fischer titration results. The life science business of Merck KGaA, Darmstadt, Germany operates as MilliporeSigma in the U.S. and Canada.
More informationTitrasure standards and volumetric solutions...for guaranteed results
Titrasure standards and volumetric solutions...for guaranteed results and Titrasure standards Titration is a high-precision analytical method that requires titrants of accurately known concentration. Scharlau
More informationSavillex Technical Note Performance of the DST-1000 Acid Purification System
Savillex Technical Note Performance of the DST-1000 Acid Purification System Summary The Savillex DST-1000 acid purification system is a sub-boiling still manufactured from PFA that produces high purity
More informationNow also in Eppendorf LoBind. Conical Competence. Eppendorf Conical Tubes 15 ml and 50 ml
Now also in Eppendorf LoBind Conical Competence Eppendorf Conical Tubes 15 ml and 50 ml 2 Eppendorf Conical Tubes The Eppendorf Tubes Best Performance for Your Samples The Eppendorf Conical Tubes 15 ml
More informationThermo Scientific Orion Fluoride Ion Selective Electrodes The standard in fluoride ion analysis EPA compliant
Thermo Scientific Orion Fluoride Ion Selective Electrodes The standard in fluoride ion analysis EPA compliant Approved ASTM Method for Fluoride in Drinking Water and Wastewater Analyze free fluoride ions
More informationDirect Analysis of Trace Metal Impurities in High Purity Nitric Acid Using ICP-QQQ
Application Note Semiconductor Direct Analysis of Trace Metal Impurities in High Purity Nitric Acid Using ICP-QQQ Authors Kazuo Yamanaka and Kazuhiro Sakai Agilent Technologies, Tokyo, Japan Introduction
More informationOPTIMIZING METALS SAMPLE PREP
APPLICATION NOTE OPTIMIZING METALS SAMPLE PREP Utlilizing Single Reaction Chamber (SRC)Technology for Trace Metals Analysis for contract laboratories. Contract analytical laboratories use a variety of
More informationColorimetric Method Method to 0.70 mg/l Ag Powder Pillows
Silver DOC316.53.01134 Colorimetric Method Method 8120 0.02 to 0.70 mg/l Ag Powder Pillows Scope and application: For water and wastewater. Test preparation Instrument-specific information Table 1 shows
More informationProviding the highest quality products thus giving maximum satisfaction to all
ACIDS INTRODUCTION The laboratory reagents offered by Labscan, are characterized by the highest quality improved for over 60 years of the company existence. In order to provide high quality of the offered
More informationPowder Pillows 0.01 to 0.80 mg/l Al 3+ (colorimeters)
Aluminum DOC316.53.01002 Aluminon Method 1 Method 8012 0.008 to 0.800 mg/l Al 3+ (spectrophotometers) Powder Pillows 0.01 to 0.80 mg/l Al 3+ (colorimeters) Scope and application: For water and wastewater.
More informationTs + Hw = Py 2 + Ry. Inorganic Trace Analysis. TraceSELECT TM Honeywell Highest purity Reliability. Discover the perfect formula
Ts + Hw = Py 2 + Ry TraceSELECT TM Honeywell Highest purity Reliability Discover the perfect formula Inorganic Trace Analysis TraceSELECT High Purity Reagents for Sample Preparation and Analysis Contents
More information1.0 ACCREDITATION / REGISTRATION 2.0 PRODUCT DESCRIPTION 3.0 CERTIFIED VALUES AND UNCERTAINTIES. Assay Information:
1.0 ACCREDITATION / REGISTRATION INORGANIC VENTURES is accredited to ISO Guide 34, "General Requirements for the Competence of Reference Material Producers" and ISO/IEC 17025, "General Requirements for
More informationThe Pure Truth. Eppendorf Forensic DNA Grade according to ISO 18385
The Pure Truth Eppendorf Forensic DNA Grade according to ISO 18385 2 Eppendorf Forensic DNA Grade»Eppendorf Forensic DNA Grade, for results you can trust.«the prevention of contamination is one of the
More informationAnalysis of trace elements in polymer samples to ensure compliance with WEEE-RoHS standards using the Thermo Scientific icap 7200 ICP-OES
APPLICATION NOTE 43145 Analysis of trace elements in polymer s to ensure compliance with WEEE-RoHS standards using the Thermo Scientific icap 7200 ICP-OES Authors Introduction Sanja Asendorf, Application
More informationMERCK reagents and auxilliaries for laboratory. Małgorzata Ciechońska Senior Field Marketing Manager Advanced Analytics EE Russia+
MERCK reagents and auxilliaries for laboratory Małgorzata Ciechońska Senior Field Marketing Manager Advanced Analytics EE Russia+ Source: Market Survey 2015 Classical Inorganics and Solvents Main Segments
More informationSodium Chloride - Analytical Standard
Sodium Chloride - Analytical Standard Determination of Arsenic Former numbering: ECSS/CN 312-1982 & ESPA/CN-E-105-1994 1. SCOPE AND FIELD OF APPLICATION The present EuSalt Analytical Standard describes
More informationMETHOD 7B - DETERMINATION OF NITROGEN OXIDE EMISSIONS FROM STATIONARY SOURCES (ULTRAVIOLET SPECTROPHOTOMETRIC METHOD)
683 METHOD 7B - DETERMINATION OF NITROGEN OXIDE EMISSIONS FROM STATIONARY SOURCES (ULTRAVIOLET SPECTROPHOTOMETRIC METHOD) NOTE: This method does not include all of the specifications (e.g., equipment and
More informationProduct Safety Reference Manual. Book 5 - Laboratory Policies and Procedures C
Book 5 - Laboratory Policies and Procedures C03-1 2009-06-15 1 Scope 1.1 This method describes a general procedure for the determination of leachable arsenic, selenium, cadmium, antimony, and barium in
More informationMSE Seminar Laboratory Safety Skills
MSE Seminar Laboratory Safety Skills MSEGSA Safety Committee Cem Akatay John Koppes Kate Hess Pylin Sarobol Topics Personal Protective Equipment Proper glove selection and use When to use goggles and aprons
More informationCuvette Test LCK 381 TOC Total organic carbon
Cuvette Test Principle Total carbon () and total inorganic carbon () are converted to carbon dioxide (CO 2 ) by, respectively, oxidation and acidification. The CO 2 passes from the digestion cuvette through
More information1.0 ACCREDITATION / REGISTRATION 2.0 PRODUCT DESCRIPTION 3.0 CERTIFIED VALUES AND UNCERTAINTIES. Assay Information:
1.0 ACCREDITATION / REGISTRATION INORGANIC VENTURES is accredited to ISO Guide 34, "General Requirements for the Competence of Reference Material Producers" and ISO/IEC 17025, "General Requirements for
More informationTrihalomethane Formation Potential (THMFP)
Trihalomethane Formation Potential (THMFP) DOC316.53.01147 THM Plus Method 1 Method 10224 Scope and application: To determine the potential of potable source waters that form trihalomethanes and other
More informationSample Preparation LCW 909. Total Kjeldahl Nitrogen, TKN NB: NEW! LCW 909 GB
Principle Organically bound nitrogen is digested by hot fuming sulphuric acid in the presence of catalysts and converted to ammonium, which, after steam distillation, can be determined as so-called Total
More informationHOW TO MAKE STANDARD SOLUTIONS FOR CHEMISTRY
HOW TO MAKE STANDARD SOLUTIONS FOR CHEMISTRY Phillip Bigelow Chemists make two common types of "standard solutions": Molar solutions Normal solutions Both of these solutions are concentrations (or strengths
More informationNational Research Council Institute for Ecosystem Study Verbania Pallanza - Italy
Tot-N UV220 pag. 1 National Research Council Institute for Ecosystem Study Verbania Pallanza - Italy Water Chemistry Laboratory Analytical Methods for internal use - http://www.idrolab.ise.cnr.it Gabriele
More informationstance et Helper Eppendorf Pipet Helper Chemical Resistance
stance et Helper Resistance N) Chemical Resistance Copyright 2017 Eppendorf AG, Germany. All rights reserved, including graphics and images. No part of this publication may be reproduced without the prior
More informationept.i.p.s. Instructions for use Version B
r N) s use for use Instructions for use Version B Copyright 2013 Eppendorf AG, Hamburg. No part of this publication may be reproduced without the prior permission of the copyright owner. Eppendorf and
More informationSalicylate Method Method HR (2 to 47 mg/l NH 3 N) TNTplus 832
, TNTplus 832, 10205 DOC316.53.01083 Salicylate Method Method 10205 HR (2 to 47 mg/l NH 3 N) TNTplus 832 Scope and Application: For surface waters, municipal and industrial wastewaters. Test preparation
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB Translated English of Chinese Standard: GB5009.
Translated English of Chinese Standard: GB5009.17-2014 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF GB THE PEOPLE S REPUBLIC OF CHINA National Food Safety Standard-Determination
More informationAquagent. The Scharlau comprehensive pyridine-free solutions range for a reliable Karl Fischer Titration
The Scharlau comprehensive pyridine-free solutions range for a reliable Karl Fischer Titration Karl Fischer titration is a well known and globally accepted method for water determination since the beginning
More informationISO 1871 INTERNATIONAL STANDARD. Food and feed products General guidelines for the determination of nitrogen by the Kjeldahl method
INTERNATIONAL STANDARD ISO 1871 Second edition 2009-09-01 Food and feed products General guidelines for the determination of nitrogen by the Kjeldahl method Produits alimentaires et aliments des animaux
More informationThermo Scientific ICP-MS solutions for the semiconductor industry. Maximize wafer yields with ultralow elemental detection in chemicals and materials
Thermo Scientific ICP-MS solutions for the semiconductor industry Maximize wafer yields with ultralow elemental detection in chemicals and materials Trace impurity analysis in chemicals an used in the
More informationMethod NumberUSTUR 150
USTUR 150: PRE-CONCENTRATION OF PLUTONIUM AND AMERICIUM FROM DISSOLVED TISSUE SAMPLES Purpose Pre-concentration of Pu and Am from tissue solutions Method NumberUSTUR 150 Original Date 10/1/99 Author Radiochemistry
More informationANALYSIS CERTIFICATE OF 1.0 ACCREDITATION / REGISTRATION 2.0 PRODUCT DESCRIPTION 3.0 CERTIFIED VALUES AND UNCERTAINTIES. Assay Information:
300 Technology Drive Christiansburg, VA 24073. USA inorganicventures.com CERTIFICATE OF ANALYSIS tel: 800.669.6799. 540.585.3030 fax: 540.585.3012 info@inorganicventures.com 1.0 ACCREDITATION / REGISTRATION
More informationUnit 1: Safety in the Laboratory
Chemistry 11 Unit 1: Safety in the Laboratory 1. Safety Equipment & Common Lab Rules 2. The Five Chemical Hazards 3. Hazard & WHMIS symbols 4. Accidents & Accident Prevention 1 Safety in the Chemistry
More informationPersulfate Digestion Method Method to 40 mg/l N (HR) TNTplus 827
Nitrogen, Total DOC316.53.01088 Persulfate Digestion Method Method 10208 5 to 40 mg/l N (HR) TNTplus 827 Scope and application: For water and wastewater. Test preparation Instrument-specific information
More informationGENERAL INSTRUCTIONS GENERAL PREPARATION
GENERAL INSTRUCTIONS Introduction The Van London Co. Nitrogen Oxide Gas-Sensing Electrode is used to measure nitrite in aqueous solutions. The measurement is not affected by sample color or turbidity.
More informationSodium Chloride - Analytical Standard
Sodium Chloride - Analytical Standard Determination of Total Mercury Former numbering: ECSS/CN 312-1982 & ESPA/CN-E-106-1994 1. SCOPE AND FIELD OF APPLICATION The present EuSalt Analytical Standard describes
More informationChemical Storage Guidelines
Storage Guidelines Do not store excess chemical containers on the benchtops, designate a storage location and return containers to that location after each use. Do not store chemicals in the fume hood.
More informationDirect Measurement of Metallic Impurities in 20% Ammonium Hydroxide by 7700s/7900 ICP-MS
Direct Measurement of Metallic Impurities in 20% Ammonium Hydroxide by 7700s/7900 ICP-MS Application Note Semiconductor Authors Junichi Takahashi Agilent Technologies Tokyo, Japan Abstract Ammonium hydroxide
More informationICP-MS Analysis of Bulk & Process Chemicals for Semiconductor Processes. Ann O Connell Chemical Analysis Eng Intel Corporation
ICPMS Analysis of Bulk & Process Chemicals for Semiconductor Processes Ann O Connell Chemical Analysis Eng Intel Corporation 1 Overview of Presentation Impact of Trace Metal contamination on Semiconductor
More informationChemical Reactions: The Copper Cycle
1 Chemical Reactions: The Copper Cycle ORGANIZATION Mode: pairs assigned by instructor Grading: lab notes, lab performance and post-lab report Safety: Goggles, closed-toe shoes, lab coat, long pants/skirts
More informationChemTag. Visual Leak Detection Products. Nowtek introduces: Water Alkali. ChemTag Tape on Floor. After Chemical Exposure
introduces: ChemTag Tape on Floor After Chemical Exposure ChemTag Acid Water Alkali Visual Leak Detection Products After Chemical Exposure to ChemTag Rings on Pipe Purpose If there is a chemical leak at
More informationNANOSTONE Cleaning Guidelines for Spiral E-Coat Elements
NANOSTONE Cleaning Guidelines for Spiral E-Coat Elements The following guidelines are presented with the understanding that they will help restore the permeate rate for an element used on electro-deposition
More informationProper Storage of Chemicals in Laboratories
Proper Storage of Chemicals in Laboratories Dr. Ideisan I. Abu-Abdoun Department of Chemistry UOS abuabdoun@sharjah.ac.ae UOS 28 - Feb. 2013 Contents Introduction Requirements Storage Facilities and Practices
More informationTetraphenylborate Method Method to 7.0 mg/l K Powder Pillows
Potassium DOC316.53.01127 Tetraphenylborate Method Method 8049 0.1 to 7.0 mg/l K Powder Pillows Scope and application: For water, wastewater and seawater. Test preparation Instrument-specific information
More informationCHAPTER - 2 EXPERIMENTAL TECHNIQUE. Potassium permanganate has been used for. oxidation of many systems. Oxidations by permanganate
42 CHAPTER - 2 EXPERIMENTAL TECHNIQUE Potassium permanganate has been used for oxidation of many systems. Oxidations by permanganate generally takes place very fast because it is a strong oxidising agent.
More informationNEW: 5.0 ml screw cap tube. The Missing Link. Eppendorf Tubes 5.0 ml Discover a new sample handling system
NEW: 5.0 ml screw cap tube The Missing Link 5.0 ml Discover a new sample handling system 5mL_Tube_BRO_GB_2015.indd 1 27.11.15 14:02 2 Combined with the comprehensive line of accessories, 5.0 ml are the
More informationTex-620-J, Determining Chloride and Sulfate Contents in Soil
Contents in Soil Contents: Section 1 Overview...2 Section 2 Sample Preparation...3 Section 3 Ion Chromatography Method...5 Section 4 Wet Chemical Method...9 Section 5 Archived Versions...15 Texas Department
More informationOxygen Demand, Chemical
Oxygen Demand, Chemical DOC316.53.01103 USEPA Reactor Digestion Method Method 10211 1 to 60 mg/l COD (ULR) TNTplus 820 Scope and application: For wastewater, process water, surface water, and cooling water.
More informationNo 022 December Application-Specific Requirements for Consumables in the Laboratory
Userguide No 022 December 2011 Application-Specific Requirements for Consumables in the Laboratory Kornelia Ewald, Eppendorf AG, Hamburg, Germany Abstract The demands placed on consumables made of plastic
More informationThe test can be performed on the following devices. In addition, the required cuvette and the absorption range of the photometer are indicated.
Silicate LR VARIO PP 0.05 -.6 mg/l SiO 2 Heteropolyblue 35 SiLr Instrument specific information The test can be performed on the following devices. In addition, the required cuvette and the absorption
More informationACQUITY UPLC Peptide BEH C 18, 130Å and 300Å Columns
CONTENTS I. INTRODUCTION II. III. GETTING STARTED a. Column Connectors b. Column Installation c. Column Equilibration d. ecord Installation e. Initial Column Efficiency Determination COLUMN USE a. Sample
More information1 Product description. Material. 3 Warnings for intended use. Instructions for use ept.i.p.s. Version B. English (EN)
Instructions ept.i.p.s. see Fig. Tab. p. p. for Version use B 1 Product description The pipette tips ept.i.p.s. are single-use pipette tips for aspirating and dispensing liquids with air cushion pipettes.
More informationCREATING & DESIGNING
A I R L E S S C O S M E T I C P A C K A G I N G I N N O V A T I O N S AIRLESS CREATING & DESIGNING COSMETIC PACKAGING SOLUTIONS SINCE 1975 CERTIFICATIONS Lumson Headquarters and both its manufacturing
More informationDimethylglyoxime Method Method to 6.0 mg/l Ni TNTplus 856
Nickel DOC316.53.01065 Dimethylglyoxime Method Method 10220 0.1 to 6.0 mg/l Ni TNTplus 856 Scope and application: For water and wastewater. Test preparation Instrument-specific information Table 1 shows
More informationCadion Method Method to 0.30 mg/l Cd TNTplus 852
Cadmium DOC316.53.01013 Cadion Method Method 10217 0.02 to 0.30 mg/l Cd TNTplus 852 Scope and application: For wastewater and process control. Test preparation Instrument-specific information Table 1 shows
More informationThe test can be performed on the following devices. In addition, the required cuvette and the absorption range of the photometer are indicated.
Chlorine L a) 0.02-4.0 mg/l Cl 2 DPD 101 CL6 Instrument specific information The test can be performed on the following devices. In addition, the required cuvette and the absorption range of the photometer
More informationUNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education
*9863619676* www.smarteduhub.com UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education CHEMISTRY 0620/06 Paper 6 Alternative to Practical May/June
More informationConcept of Elemental Impurities (EI) assessment in finished dosage forms by total extraction testing
Concept of Elemental Impurities (EI) assessment in finished dosage forms by total extraction testing W. Keurentjes, F. Maris, T. Wang, M. van Tiel Merck & Co. Content Introduction How did we start Straight
More informationPowder Pillows 0.01 to 1.60 mg/l SiO 2 (LR, colorimeters)
Silica DOC316.53.01132 Heteropoly Blue Method 1 Method 8186 0.010 to 1.600 mg/l SiO 2 (LR, spectrophotometers) Powder Pillows 0.01 to 1.60 mg/l SiO 2 (LR, colorimeters) Scope and application: For boiler
More informationThe end of. mass-speculation. MS Certified Vials Pre-cleaned and certified vials for mass spectrometry
The end of mass-speculation Pre-cleaned and certified vials for mass spectrometry Bonded, ultra-pure closures LC/MS and GC/MS Manufacturing the Ultimate Vial for Mass Spectrometry More than a quarter century
More informationChromium, Total. Alkaline Hypobromite Oxidation Method 1 Method to 0.70 mg/l Cr (spectrophotometers) 0.01 to 0.60 mg/l Cr (colorimeters)
Chromium, Total DOC316.53.01034 Alkaline Hypobromite Oxidation Method 1 Method 8024 0.01 to 0.70 mg/l Cr (spectrophotometers) 0.01 to 0.60 mg/l Cr (colorimeters) Scope and application: For water and wastewater.
More informationDetermination of ultratrace elements in photoresist solvents using the Thermo Scientific icap TQs ICP-MS
APPLICATION NOTE 43374 Determination of ultratrace elements in photoresist solvents using the Thermo Scientific icap TQs ICP-MS Authors Tomoko Vincent, Product Specialist, Thermo Fisher Scientific Keywords
More informationINCOMPATIBILITY BETWEEN CHEMICALS
INCOMPATIBILITY BETWEEN S CODE SHR 301 Date: April 2009 Revision: 02 Page: 1 of 5 INCOMPATIBILITY BETWEEN S Products that could react violently with each other should not be stored together, particularly
More informationTube O Reactor. (Micro: Cat. # K, K, K) (Medi: Cat. # K, K, K)
453PR G-Biosciences 1-800-628-7730 1-314-991-6034 technical@gbiosciences.com A Geno Technology, Inc. (USA) brand name Tube O Reactor (Micro: Cat. # 786 024 4K, 786 024 8K, 786 024 15K) (Medi: Cat. # 786
More informationPreparation of Food and Feed Samples for Metals Analysis
White Paper Preparation of Food and Feed Samples for Metals Analysis Alan Cross Technical Specialist, Metals Laboratory Preparation of Food and Feed Samples for Metals Analysis The relative virtues of
More informationThe analysis of organic acid content of additives, premix, feed, and water.
The analysis of organic acid content of additives, premix, feed, and water. Contents Foreword Introduction Warnings 1. Scope 2 1.1 LOD and LOQ 3 2. Normative References 3 3. Definitions 3 3.1 Feed (or
More informationTs + Hw = Py 2 + Ry. Inorganic Trace Analysis. TraceSELECT TM Honeywell Highest purity Reliability. Discover the perfect formula. Research Chemicals
Research Chemicals Ts + Hw = Py 2 + Ry TraceSELECT TM Honeywell Highest purity Reliability Discover the perfect formula Inorganic Trace Analysis TraceSELECT High Purity Reagents for Sample Preparation
More informationChemical Storage Guide
1 P a g e Chemical Storage Guide It is the responsibility of every occupant, owner, tenant, contractor, employee & visitor and ALL users of this facility to ensure they take all reasonably practical steps
More informationCHM 130 Acid-Base Titration Molarity of Acetic Acid in Vinegar
CHM 130 Acid-Base Titration Molarity of Acetic Acid in Vinegar INTRODUCTION One of the most important techniques for chemical analysis is titration to an equivalence point. To illustrate this procedure,
More information1.0 ACCREDITATION / REGISTRATION 2.0 PRODUCT DESCRIPTION 3.0 CERTIFIED VALUES AND UNCERTAINTIES. Assay Information:
1.0 ACCREDITATION / REGISTRATION INORGANIC VENTURES is accredited to ISO Guide 34, "General Requirements for the Competence of Reference Material Producers" and ISO/IEC 17025, "General Requirements for
More informationNOTE: YOU WILL BE USING THIS SOLUTION IN BOTH, THIS EXPERIMENT AND EXP 12B. IF YOU WASTE THE SOLUTION YOU MAY RUN OUT BEFORE YOU HAVE FINISHED EXP 12B
EXPERIMENT 12 A: STANDARDIZATION OF A SODIUM HYDROXIDE SOLUTION OBJECTIVE: Sodium hydroxide solution of about 0.2 M is prepared in order to be used in Exp 12B. The solution is then standardized, that is,
More informationept.i.p.s. pipette tips are available with various degrees of purity, with and without filters, and as special tips.
Instructions ept.i.p.s. see Fig. Tab. p. p. for General use Lab Product 1 Product description The pipette tips are single-use pipette tips for aspirating and dispensing liquids with air cushion pipettes.
More informationAcroSeal Packaging. Your Solution for Air- and Moisture-Sensitive Organometallic Reagents
AcroSeal Packaging Your Solution for Air- and Moisture-Sensitive Organometallic Reagents AcroSeal Packaging Your Solution for Air- and Moisture-Sensitive Organometallic Reagents Introduction Organometallic
More informationChemical Segregation and Storage Guide
Chemical Segregation and Storage Guide This resource developed by LabCentral for the Pagliuca Harvard Life Lab Revision 1, Effective Dec 13, 2016 Table of Contents 1.0 PURPOSE AND SCOPE...3 2.0 CLASSES
More informationSingle Analyte Custom Grade Solution ± 4 µg/ml g/ml (measured at 20 ± 1 ºC) Acidimetric NIST SRM 84L Lot Number: 84L
1.0 ACCREDITATION / REGISTRATION INORGANIC VENTURES is accredited to ISO Guide 34, "General Requirements for the Competence of Reference Material Producers" and ISO/IEC 17025, "General Requirements for
More informationPAR Method Method to 2.0 mg/l Pb TNTplus 850
Lead DOC316.53.01056 PAR Method Method 10216 0.1 to 2.0 mg/l Pb TNTplus 850 Scope and application: For wastewater and process control. Test preparation Instrument-specific information Table 1 shows all
More informationph Calibration Buffers
ph Calibration Buffers Uncompromising Quality 3 Manufacturing/ Inventory Locations Tightest Tolerances in the Industry, Lowest Lot-to-Lot Variability Ricca has been the leading name in high quality Buffers
More informationSingle Analyte Custom Grade Solution g/ml (measured at 20 ± 1 ºC) ICP Assay NIST SRM 3163 Lot Number:
1.0 ACCREDITATION / REGISTRATION INORGANIC VENTURES is accredited to ISO Guide 34, "General Requirements for the Competence of Reference Material Producers" and ISO/IEC 17025, "General Requirements for
More informationChloramine (Mono) and Nitrogen, Free Ammonia
Chloramine (Mono) and Nitrogen, Free Ammonia DOC316.53.01016 Indophenol Method 1 Method 10200 0.04 to 4.50 mg/l Cl 2 0.01 to 0.50 mg/l NH 3 N Powder Pillows Scope and application: For the determination
More informationScope and application: For wastewater, seawater, drinking water, surface water and process water.
Cyanide DOC316.53.01495 USEPA 1 Pyridine Barbituric Acid Method 2 Method 10265 0.01 to 0.60 mg/l CN TNTplus 862 Scope and application: For wastewater, seawater, drinking water, surface water and process
More informationAnalytical Quality Control ensure the safety of the results of your samples
Analytical Quality Control ensure the safety of the results of your samples New Certified Reference materials ready-to-use for water and waste water analysis The life science business of Merck operates
More informationUNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education
UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education *2162704759* CO-ORDINATED SCIENCES 0654/51 Paper 5 Practical Test May/June 2012 2 hours Candidates
More informationSingle Analyte Custom Grade Solution ± 4 µg/ml g/ml (measured at 20 ± 1 ºC) EDTA NIST SRM 928 Lot Number: 928
1.0 ACCREDITATION / REGISTRATION INORGANIC VENTURES is accredited to ISO Guide 34, "General Requirements for the Competence of Reference Material Producers" and ISO/IEC 17025, "General Requirements for
More informationGlobal Experiment for the International Year of Chemistry. ph of the Planet
Global Experiment for the International Year of Chemistry ph of the Planet This document contains a description for the ph of the Planet Activity that is part of the Global Experiment being conducted during
More informationImprovement of the Time Sensitive Chemical Process at Los Alamos National Laboratory
Improvement of the Time Sensitive Chemical Process at Los Alamos National Laboratory EFCOG Safety Working Group Industrial Hygiene and Safety Technical Task Group Fall Meeting, October 2017 Dina Siegel,
More informationThe Determination of Toxic, Trace, and Essential Elements in Food Matrices using THGA Coupled with Longitudinal Zeeman Background Correction
application Note Atomic Absorption Authors David Bass Senior Product Specialist Cynthia P. Bosnak Senior Product Specialist PerkinElmer, Inc. Shelton, CT 06484 USA The Determination of Toxic, Trace, and
More informationScope and application: For water, wastewater and seawater. Distillation is required for wastewater and seawater.
Nitrogen, Ammonia DOC316.53.01078 USEPA 1 Nessler Method 2 Method 8038 0.02 to 2.50 mg/l NH 3 N Reagent Solution Scope and application: For water, wastewater and seawater. Distillation is required for
More informationUNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education CHEMISTRY
Centre Number Candidate Number Name UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education CHEMISTRY 06/06 Paper 6 Alternative to Practical Candidates
More informationNICKEL-63/59 IN WATER
Analytical Procedure NICKEL-63/59 IN WATER 1. SCOPE 1.1. This is a method for the separation and measurement of nickel- 63/59 in water samples. 1.2. This method does not address all aspects of safety,
More informationChlorine, Free and Total, High Range
Chlorine, Free and Total, High Range DOC316.53.01490 USEPA DPD Method 1 Method 10069 (free) 10070 (total) 0.1 to 10.0 mg/l Cl 2 (HR) Powder Pillows Scope and application: For testing higher levels of free
More informationSingle Analyte Custom Grade Solution g/ml (measured at 20 ± 1 ºC) ICP Assay NIST SRM 3112a Lot Number: Cr3
1.0 ACCREDITATION / REGISTRATION INORGANIC VENTURES is accredited to ISO Guide 34, "General Requirements for the Competence of Reference Material Producers" and ISO/IEC 17025, "General Requirements for
More information