Outline Chapter 2: Signals and Systems

Similar documents
Chapter 4 The Fourier Series and Fourier Transform

Chapter One Fourier Series and Fourier Transform

( ) ( ) if t = t. It must satisfy the identity. So, bulkiness of the unit impulse (hyper)function is equal to 1. The defining characteristic is

ADDITIONAL PROBLEMS (a) Find the Fourier transform of the half-cosine pulse shown in Fig. 2.40(a). Additional Problems 91

Representing a Signal. Continuous-Time Fourier Methods. Linearity and Superposition. Real and Complex Sinusoids. Jean Baptiste Joseph Fourier

6.003 Homework #9 Solutions

6.003 Homework #9 Solutions

6.003 Homework #13 Solutions

EE 224 Signals and Systems I Complex numbers sinusodal signals Complex exponentials e jωt phasor addition

CHAPTER 2 Signals And Spectra

A complex discrete (or digital) signal x(n) is defined in a

System Processes input signal (excitation) and produces output signal (response)

Guest Lectures for Dr. MacFarlane s EE3350 Part Deux

III-A. Fourier Series Expansion

Chapter 1 Fundamental Concepts

2 Frequency-Domain Analysis

The Fourier Transform.

Continuous Time. Time-Domain System Analysis. Impulse Response. Impulse Response. Impulse Response. Impulse Response. ( t) + b 0.

Lecture 2: Optics / C2: Quantum Information and Laser Science

6.003: Signals and Systems

Spectral Analysis. Joseph Fourier The two representations of a signal are connected via the Fourier transform. Z x(t)exp( j2πft)dt

SOLUTIONS TO ECE 3084

Chapter 3: Signal Transmission and Filtering. A. Bruce Carlson Paul B. Crilly 2010 The McGraw-Hill Companies

Communication Systems, 5e

6.003: Signal Processing

Q1) [20 points] answer for the following questions (ON THIS SHEET):

Signals and Systems Linear Time-Invariant (LTI) Systems

Signals and Systems Prof. Brian L. Evans Dept. of Electrical and Computer Engineering The University of Texas at Austin

DEPARTMENT OF ELECTRICAL AND ELECTRONIC ENGINEERING EXAMINATIONS 2008

For example, the comb filter generated from. ( ) has a transfer function. e ) has L notches at ω = (2k+1)π/L and L peaks at ω = 2π k/l,

Notes 04 largely plagiarized by %khc

2 int T. is the Fourier transform of f(t) which is the inverse Fourier transform of f. i t e

EELE Lecture 8 Example of Fourier Series for a Triangle from the Fourier Transform. Homework password is: 14445

KEEE313(03) Signals and Systems. Chang-Su Kim

5. Response of Linear Time-Invariant Systems to Random Inputs

Laplace Transform and its Relation to Fourier Transform

Linear Time-invariant systems, Convolution, and Cross-correlation

EE3723 : Digital Communications

EELE Lecture 3,4 EE445 - Outcomes. Physically Realizable Waveforms. EELE445 Montana State University. In this lecture you:

e 2t u(t) e 2t u(t) =?

EE 315 Notes. Gürdal Arslan CLASS 1. (Sections ) What is a signal?

9/9/99 (T.F. Weiss) Signals and systems This subject deals with mathematical methods used to describe signals and to analyze and synthesize systems.

Continuous Time Linear Time Invariant (LTI) Systems. Dr. Ali Hussein Muqaibel. Introduction

Delhi Noida Bhopal Hyderabad Jaipur Lucknow Indore Pune Bhubaneswar Kolkata Patna Web: Ph:

Chapter 2 : Fourier Series. Chapter 3 : Fourier Series

Inverse transform. Inverse transform. tri(t) = Λ(t) sinc 2 (f) sinc 2 (t) tri(f) e πt2 e πf 2. e ±iπt2 e ±iπ/4 e iπf 2

6.003: Signals and Systems Lecture 20 November 17, 2011

6.003: Signals and Systems. Fourier Representations

EECE 301 Signals & Systems Prof. Mark Fowler

EE 313 Linear Signals & Systems (Fall 2018) Solution Set for Homework #8 on Continuous-Time Signals & Systems

28. Narrowband Noise Representation

The complex Fourier series has an important limiting form when the period approaches infinity, i.e., T 0. 0 since it is proportional to 1/L, but

EECE 301 Signals & Systems Prof. Mark Fowler

6.003: Signals and Systems. Relations among Fourier Representations

Lecture 4. Goals: Be able to determine bandwidth of digital signals. Be able to convert a signal from baseband to passband and back IV-1

Phase Noise in CMOS Differential LC Oscillators

Block Diagram of a DCS in 411

Signals and Systems Profs. Byron Yu and Pulkit Grover Fall Midterm 1 Solutions

Fourier Series & The Fourier Transform. Joseph Fourier, our hero. Lord Kelvin on Fourier s theorem. What do we want from the Fourier Transform?

System-On-Chip. Embedding A/D Converters in SoC Applications. Overview. Nyquist Rate Converters. ADC Fundamentals Operations

Solutions - Midterm Exam

From Complex Fourier Series to Fourier Transforms

6.003: Signals and Systems

LAPLACE TRANSFORM AND TRANSFER FUNCTION

Institute for Mathematical Methods in Economics. University of Technology Vienna. Singapore, May Manfred Deistler

6.003: Signal Processing

Digital Signal Processing

Signals and Systems Review. 8/25/15 M. J. Roberts - All Rights Reserved 1

B Signals and Systems I Solutions to Midterm Test 2. xt ()

10. State Space Methods

Fundamentals of Electrical Engineering 3

Chapter 8 The Complete Response of RL and RC Circuits

Solutions to the Exam Digital Communications I given on the 11th of June = 111 and g 2. c 2

EECS 2602 Winter Laboratory 3 Fourier series, Fourier transform and Bode Plots in MATLAB

Receivers, Antennas, and Signals. Professor David H. Staelin Fall 2001 Slide 1

h[n] is the impulse response of the discrete-time system:

Fourier Transforms. L is given by

23.2. Representing Periodic Functions by Fourier Series. Introduction. Prerequisites. Learning Outcomes

Answers to Exercises in Chapter 7 - Correlation Functions

Elements of Stochastic Processes Lecture II Hamid R. Rabiee

6.003 Homework #8 Solutions

EECE 301 Signals & Systems Prof. Mark Fowler

The Laplace Transform

23.5. Half-Range Series. Introduction. Prerequisites. Learning Outcomes

Voltage/current relationship Stored Energy. RL / RC circuits Steady State / Transient response Natural / Step response

6.302 Feedback Systems Recitation 4: Complex Variables and the s-plane Prof. Joel L. Dawson

A First Course in Digital Communications

Signal processing. A. Sestieri Dipartimento di Meccanica e Aeronautica University La Sapienza, Rome

A Bayesian Approach to Spectral Analysis

f t te e = possesses a Laplace transform. Exercises for Module-III (Transform Calculus)

EECS20n, Solution to Midterm 2, 11/17/00

Power of Random Processes 1/40

Section 7.4 Modeling Changing Amplitude and Midline

Web Appendix N - Derivations of the Properties of the LaplaceTransform

Characteristics of Linear System

Demodulation of Digitally Modulated Signals

ME 452 Fourier Series and Fourier Transform

Communication System Analysis

6.2 Transforms of Derivatives and Integrals.

2 Signals. 2.1 Elementary algebra on signals

Transcription:

Ouline Chaper 2: Signals and Sysems Signals Basics abou Signal Descripion Fourier Transform Harmonic Decomposiion of Periodic Waveforms (Fourier Analysis) Definiion and Properies of Fourier Transform Imporan Correspondences Linear Time-Invarian (LTI) Sysems Convoluion and Frequency Response Bandwidh Definiions for Time Duraion and Bandwidh Relaion of Time and Frequency Descripion of a Signal: Time-Bandwidh Produc Discree-Time Signals Sampling Theorem

Signals Physical represenaion of daa as funcion of ime: x() Speech, music, picure, measuremen daa, email, coninuous ime & ampliude con. ime, disc. ampliude Classificaion coninuous or discree in ime and / or coninuous or discree in ampliude Analog signal coninuous ime & coninuous ampliude Digial signal discree ime & discree ampliude (sampling and quanizaion) 0.5 0-0.5-0 0.2 0.4 0.6 0.8 disc. ime, con. ampliude 0.5 0-0.5-0 0.2 0.4 0.6 0.8 0.5 0-0.5-0 0.2 0.4 0.6 0.8 discree ime & ampliude 0.5 0-0.5-0 0.2 0.4 0.6 0.8 2

Signals Parameers of he signal represen he value of he daa Parameer of periodic signals, i.e. x() = x(+ T), = ±, ±2, period T frequency f =/T in Hz = /s ampliude A phase shif ϕ Example: x() = A sin(2πf + ϕ) = A sin( + ϕ) angular frequency =2π f Differen represenaions of signals x() Ampliude X(f) Frequency Specrum Phase sae diagram Q = A sin ϕ ϕ I = A cos ϕ ϕ T = /f f 3

Harmonic Decomposiion of Periodic Waveforms (Fourier Analysis) A periodic signal componens: x() = a 0 2 + P x() =x( + T ) n= can be decomposed ino harmonic an cos(2πn T )+b n sin(2πn T ) Fourier coefficiens: a n = 2 T T/2 R T/2 x() cos(2πn T ) d; b n = 2 T T/2 R T/2 x() sin(2πn T ) d Compac complex formulaion: x() = P n= c n exp(j2πn T ); c n = T T/2 R T/2 x() exp( j2πn T ) d; 4

Properies of Fourier Coefficiens if real signals: x() R c n = c n ; c 0 R x() = c 0 + = c 0 + X cn e j2πn T + c n e j2πn T n= X h Re{c n } e j2πn T +e j2πn T {z } 2cos(2πn/T ) n= + jim{cn } e j2πn i T e j2πn T {z } 2j sin(2πn/t ) a n =2Re{c n }; b n = 2Im{c n }; a 0 =2c 0 conjugae even symmery: x() =x ( ) c n = a n /2 R conjugae odd symmery: x() = x ( ) jc n = b n /2 R 5

Recangular Waveform c n = T = ZT/2 T/2 Example x()e j2πn T d = T h sin(2πn 2πn T i +T/4 T/4 ZT/4 T/4 - = πn sin π 2 n = x() 0 cos(2πn T ) d /T /2 n =0 ±/πn n odd,n6= 0 0 n even 6

Fourier Transformaion (FT) Le x() be a deerminisic signal (no necessarily periodic) Fourier Transformaion of x() wih angular frequency =2π f X(j) = F {x()} = x() e j d x() =F {X(j)} = 2π X(j) e j d Inegral exiss if x() is absoluely inegrable: Decomposiion of x() ino is frequency componens In general X(j) is complex-valued Terms and definiions: X(j) : specrum of he signal phase specrum X(j) : magniude specrum Lineariy a x ()+a 2 x 2 () R x() d < X(j) = X(j) e jϕ(j) ϕ(j) =arg{x(j)} =arcan a X (j)+a 2 X 2 (j) ½ ¾ Im {X(j)} Re {X(j()} 7

Example Specrum of a recangular impulse rec T () x() = Definiion: sinc T 2 << T 2 = T 2 2 0 else sinc(x) = sin(x) x x() X(j) = sinc(x) = 0 for x = 2π, = ±, ±2, x() e j d = ZT/2 T/2 e j d = e j j = e jt/2 e +jt/2 = sin(t/2) j /2 µ T = T sinc 2 X(j) T equally spaced zeros sinc T 2 T/2 T/2 T/2=`π =0 -T/2 T/2-6π/T -4π/T 2π/T -2π/T 4π/T 6π/T 8

Example Impulse response of an ideal low pass X(j) = g << g = 2 g 0 else X(j) x() =F {X(j)} = 2π = 2π Z g g e j d = g /π x() g π X(j) e j d sin( g ) g = g π sinc ( g) equally spaced zeros sinc( g ) g =`π =0 - g Dualiy: g -4π/ g -2π/ g x() X(j) X(j) 2π x( ) -π/ g π/ g 2π/ g 4π/ g 9

Symmery of Specrum for real-valued Signals Assumpion: x() R is a real-valued signal in general X(j) C Fourier Transform of real-valued signal X(j) = x() e j d = x() cos()d j x() sin()d wih e +j =cos()+j sin() {z } Re{X(j)} and {z } Im{X(j)} e j =cos() j sin() Symmery condiions for real/imaginary par of X(j) and magniude/angle specrum Re {X(j)} =Re{X( j)} even w.r.. X(j) = X( j) Im {X(j)} = Im {X( j)} odd w.r.. arg X(j) = arg X( j) specrum is conjugae even X(j) =X ( j) conjugae complex If symmery condiion is no saisfied he ime signal is complex-valued 0

Modulaion, Time Delay Modulaion FT of ime signal x() muliplied wih exponenial funcion exp(j 0 ) x() e j 0 F x() e j 0 ª = x() e j 0 e j d = x() e j( 0) d Muliplicaion wih exponenial funcion corresponds o shif in frequency domain Time delay x( 0 ) F{x( 0 )} = = X(j j 0 ) X(j) x( 0 ) e j d = X(j(- 0 )) 0 x(τ) e j(τ+ 0) dτ = e j0 x(τ) e jτ dτ = X(j) e j 0 Time delay corresponds o phase shif in frequency domain

Properies of Fourier Transform () ime domain x () X ( j) frequency domain lineariy ax() + ax() 2 2 ax( j ) + ax ( j) 2 2 lineariy real x * () = x() X j X j * ( ) = ( ) conjugae even even (real) x () = x( ) X j X j * ( ) = ( ) real (even) odd (real) x () = x( ) [ jx j ] * jx ( j ) = ( ) imaginary (odd) ime delay x () = x ( ) 0 e j 0 X( j) mul. wih exp. modulaion x () j 0 e X ( j j ) 0 shif by 0 convoluion x () x () 2 X ( j) X ( j) 2 muliplicaion muliplicaion x () x () 2 2 π X( j) X2( j) convoluion differeniaion inegraion d x d () x() τ dτ j X( j) [ ] j X( j ) + πx( j0) δ( ) muliplicaion wih j muliplicaion wih j 2

Properies of Fourier Transform (2) ime domain x () X ( j) frequency domain inverse ime axis x( ) X ( j) inverse frequency axis conjugae complex x * () X * ( j) conjugae + inverse frequency axis inverse ime axis + conjugae x * ( ) X * ( j) conjugae complex Theorem of Parseval: Similariy: x() 2 d = 2π X(j) 2 d x() X(j) x(a) a X j a for a R \{0} Dualiy: x() X(j) X(j) 2π x( ) 3

Dirac δ() =0 if 6= 0 R and δ()d = Consan x() = Example X(j) = X(j) =2πδ() δ() e j d = 2π X(j) X(j) Exponenial Funcion x() =e j 0 X(j) =F e j 0 ª =2πδ( 0 ) 2π X(j) Cosine cos( 0 )= 2 e j 0 +e j 0 X(j) =F ½ 2 e j 0 + e j 0 ¾ = 2 [2πδ( 0)+2πδ( + 0 )] π - 0 0 X(j) 0 Sine sin( 0 )= 2j = π [δ( 0 )+δ( + 0 )] e j 0 e j 0 X(j) =jπ [ δ( 0 )+δ( + 0 )] - 0 jπ X(j) 0 4

Fourier Transform of Periodic Signals Fourier ransform of cosine and sine cos( 0 )= 2 sin( 0 )= 2j e j 0 +e j 0 X(j) =π [δ( 0 )+δ( + 0 )] e j 0 e j 0 Fourier ransform of periodic signals Conains sequence of impulses in frequency domain a muliples of he fundamenal frequency 0 of he periodic signal discree specrum X X(j) =F{x()} = x n δ( n 0 ) x n given by Fourier Analysis Example: Infinie Dirac impulse series X δ T () = δ( nt ) 0 n= δ T () -2T -T 0 T 2T n= X(j) =jπ [ δ( 0 )+δ( + 0 )] X n= δ( n 0 )= 0 δ 0 (j) δ 0 (j) 0 0-2 0-0 0 2 0-0 - 0 π jπ X(j) 0 X(j) 0 Infinie dirac sequence in ime Infinie dirac sequence in frequency 5

Muli sine funcion x() 0.5 0-0.5-0 2 4 6 8 0 Modulaion: Muliplicaion wih in ms Example x() =0.5sin(2πf )+0.3sin(2πf 2 )+0.2sin(2πf 3 ) X(j) m() =cos(2πf M ) f in khz and f M =4kHz f = 0,4 khz f 2 = 0,8 khz f 3 =.2 khz Lineariy of FT 0.5 m() x() m() 0-0.5 Y(j) Y(j)= 0.5 X(j-j M ) +0.5 X(j+j M ) - 0 2 4 6 8 0 in ms f in khz 6

Imporan Correspondences of Fourier Transform ime domain x () X ( j) frequency domain Dirac impulse δ() consan consan 2 π δ( ) Dirac impulse exponen. osc. cosine sine recangular pulse sinc cos( 0 ) sin( 0 ) rec ( ) = T j 0 e ( g) { T /2 0 else sin /( ) g 2 π δ( 0) [ ( 0) +δ+ ( 0) ] [ ( ) ( )] π δ π δ δ + j 0 0 T T 2 sinc( ) { π / 0 else X( j= ) g g specral line a 0 lines a ± 0 (even) lines a ± 0 (odd) sinc recangular pulse gaussian pulse exp a 2 2 π/ a exp 4 a gaussian pulse Dirac sequence δ ( = kt) k δ = ( ) 2π 2π T k k T Dirac sequence 7

Linear Time-Invarian (LTI) Sysems x() y() h() Oupu signal is given by convoluion of x() wih impulse response h() y() =x() h()= x(τ) h( τ)dτ = h(τ) x( τ)dτ symmeric in x() and h() How o calculae? Reverse impulse response h(-τ) h(τ) h(-τ) Shif h(-τ) by h(-τ) 0 T -T 0 Muliply h(-τ) wih x(τ) and calculae he inegral Oupu y() equals inegraion resuls x(τ) Repea for all h(-τ) -T 0 T τ 8

Example Convoluion of wo recangular impulses Cases: <0 h(-τ) x(τ) y() =0 x() =h() =rec T () T y() -T 0 T τ 0 T 2T 0 T -T 0 T y() = Z 0 dτ = T 2T 0 -T T y() = Z T T dτ =2T < 2T y() =0 0 T -T 9

Transmission of Exponenial Funcion Consider complex exponenial inpu signal y() =x() h() = h(τ) e j0( τ) dτ = e j 0 x() =e j 0 h(τ) e j 0τ dτ =x() H(j 0 ) Oupu corresponds o inpu signal muliplied by frequency dependen consan H(j 0 ) Shape of exponenial signal (or sinusoidal signal) is no affeced Frequency response of he sysem H(j) = Convoluion in ime domain Muliplicaion of frequency specrum y() =x() h()= x(τ) h( τ)dτ Y (j) =X(j) H(j) Treamen in frequency domain leads (ofen) o much simpler inerpreaion Dualiy: Convoluion in frequency corresponds o muliplicaion in ime X(j) H(j) 2π x() h() h() e j d 20

Convoluion wih Dirac Impulse Convoluion of ime signal x() wih dirac impulse x() δ()= x(τ) δ( τ)dτ = x() X(j) =X(j) Signal is no affeced when convolved wih dirac impulse Time shif corresponds o convoluion of x() wih δ(- 0 ) δ(-τ) x(τ) 0 T τ x( 0 )=x() δ( 0 ) X(j) e j 0 Convoluion wih finie sequence of dirac impulses x() [δ( )+δ()+δ( 2 )] = x( )+x()+x( 2 ) X(j) e j ++e 2 2

Bandwidh Time-domain x() and frequency-domain X(j) of a signal are inversely relaed If x() is changed han X(j) is changed in an inverse manner and vice versa If x() is sricly limied in ime, han X(j) will ail on indefiniely and vice versa Time-Bandwidh produc is consan B T =cons. How o define ime duraion T or bandwidh B for infinie signals? Definiion : (x()=x(-) real, even signal) Definiion of equivalen recangle of heigh x(0) and widh T / heigh X(0) and widh B T = x(0) Time-Bandwidh produc x() B T =2π x()d B = X(0) X(j)d T X(j) B T -T/2 T/2-2π/T 2π/T 22

Bandwidh Definiion requires several resricions (e.g. even signals) more general definiion is desired Definiion 2: 2 nd -order definiion (roo mean square) T = v u 2 x 2 ()d, B = v u 2π Uncerainy Relaion of Communicaion Technology Gauss impulse achieves minimum ime-bandwidh produc B T = q 2 ; b T = 4π x() =Ae α2 X(j) = 4α 2 x() and X(j) have same form π α e Opimum impulse wih respec o bandwidh efficiency Applicaion in GSM: Gaussian Minimum Shif Keying (GMSK) Oher definiions: 3-dB bandwidh, null-o-null bandwidh, 2 X(j) 2 d ; B =2πb = angular frequency B T 2 ; b T 4π 23

Ideal Lowpass Ideal Pass Filer Signals / Sysems X(j) - g g Ideal Highpass Ideal Bandpass - g X(j) g X(j) - 2-2 24

Time-Discree Signals x() k T s x[k] =x(k T s ) T s : sampling ime f s =/T s : sampling frequency Non-periodic ime-coninuous signal is sampled a equally disan ime insances T s (sampling ime) Sequence of samples X X x() δ Ts () = x() δ( kt s )= x[k] δ( kt s )=x d [k] k= x() x[k] =x(k T s ) k= T s 2T s 4T s 6T s 8T s 0T s 2T s 4T s 6T s 25

Specrum of sampled signal X d (j) =F{x d [k]} = T s X k= Specrum X(j( k s )) Discree signal has a periodic specrum ( periodic signal has discree specrum) Periodic repeiion of he original specrum X(j) wih disance f s = / T s X d (j) X(j + j s ) X(j) X(j j s ) aliasing 2π/Τ s π/τ s π/t s 2π/Τ s Aliasing: Overlapping of periodic specrum In order o avoid aliasing, he sampling frequency f s = / T s has o be chosen efficienly large 26

Sampling Theorem Band limied specrum: X(j) =0 for > 2πB No corrupion of original specrum if f s > 2b X d (j) X(j( + s )) X(j) X(j( s )) 2π/Τ s π/τ s π/t s 2π/Τ s Sampling Theorem of Shannon: If a ime-coninuous signal of bandwidh b is sampled wih sampling frequency f s >2b hen he original analog signal can perfecly be reconsruced by filering wih an ideal lowpass filer wih cu-off frequency f s /2. X µ x() = x[k] sinc π kt s T s k= 27