Product Safety Summary for Ammonium Sulphate

Similar documents
Version: 1. Summary for. Sulfuric acid Sulfuric acid Mascagnite GENERAL. Sulphate can. are required. USES AND. Ammoniumsulfat

Product Safety Summary for Sulphuric Acid

Product Safety Summary for Sulphuric Acid

Product Stewardship Summary

Reaction mass of dimethyl adipate and dimethyl glutarate and dimethyl succinate

SECTION 1. Identification of the substance/mixture and of the company/undertaking. Low Density Polyethylene LF2207M

GPS Safety Summary Acetic Acid

Product Stewardship Summary

SECTION 3 PRODUCT COMPOSITION The test kit is composed of QuSTICK Strep A Reagent Stick, Reagent A, Reagent B, Positive Control, and Negative Control.

Global Product Strategy (GPS) Safety Summary. Tetrahydrofuran

GPS SAFETY SUMMARY SODIUM HYDROXIDE (AQUEOUS SOLUTION 50%)

The Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

Issue Date 04-May-2015 Revision Date 20-May-2015 Version 2 1. IDENTIFICATION CALCIUM HYDROXIDE HP-XL. No information available.

GPS summary for Sodium Hypochlorite CAS: Brzeg Dolny

Hazard Communication for Dangerous and Harmful Materials

Summary of OSHAs New Hazard Communication Standard The Globally Harmonized System of Classification and Labeling of Chemicals

Safety Data Sheet according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), 29CFR1910/1200 and GHS Rev. 3

PRODUCT SAFETY SUMMARY (GPS) SODIUM-HYDROXIDE

Safety Data Sheet. Identification of the substance/mixture, intended use and of the company/undertaking

Globally Harmonized System of Classification and Labeling of Chemicals (GHS) LC-1033p Rev. 06/16

Trade Name: Dust Off Touch Screen Wipes. 1 Identification of the substance/mixture and of the supplier. 1.1 Product identifier

Hazcom 2012: Changes to the OSHA Hazard Communication Standard. Risk Engineering

Product Stewardship Summary

LABELS AND SAFETY DATA SHEETS

7/8/2013. What is GHS?

Safety Data Sheet. (Silicon Dioxide) DATE PREPARED: 1/6/2016. Section 1. Product and Company Identification

GPS Safety Summary. 1. NAME OF SUBSTANCE Sulfuric acid.

Safety Data Sheet acc. to OSHA HCS

1.4. E m e r g e n c y te l e p h o n e n u m b e r : Infotrac (Contract# ) Dial when outside the US

Material Safety Data Sheet acc. to ISO/DIS 11014

Material Safety Data Sheet acc. to ISO/DIS 11014

New OSHA Training Requirements for the Revised HAZ-Com Standard 2014 Presented by Aircare FACTS Training. Haz Com 2014 Update

Global Harmonization and Hazard Communication

Sodium Hypochlorite Solution, 10-16%

Material Safety Data Sheet acc. to ISO/11014:2009

Material Safety Data Sheet acc. to ISO/DIS 11014

WHAT S WRONG WITH THIS PICTURE?

Material Safety Data Sheet acc. to ISO/DIS 11014

DRAIN TRACING DYE RED E123

Issue Date: 01-Sep-2012 Revision Date: 16-Jul-2014 Version 1 1. IDENTIFICATION. Slide Lecithin Mold Release 2. HAZARDS IDENTIFICATION

Safety Data Sheet acc. to OSHA HCS

Today we re going to talk about understanding chemical labels. Each one of us works with chemicals, whether at work or at home. You need to know how

Safety Data Sheets (SDS)

Material Safety Data Sheet acc. to ISO/DIS 11014

Complying with OSHA s Revised Hazard Communication Standard

Material Safety Data Sheet acc. to ISO/DIS 11014

Safety Data Sheet acc. to OSHA HCS

HAZARD COMMUNICATION PROGRAM 2015 UPDATE GHS AWARENESS TRAINING CSULB COE

Material Safety Data Sheet acc. to ISO/DIS 11014

Material Safety Data Sheet acc. to ISO 11014

HAZCOM - Training

Substance name: 2,4 - Dinitrotoluene EC number: CAS number: MEMBER STATE COMMITTEE SUPPORT DOCUMENT FOR IDENTIFICATION OF

Hazard Communication Standard: Safety Data Sheets

Material Safety Data Sheet acc. to ISO/DIS 11014

Material Safety Data Sheet acc. to ISO/DIS 11014

MATERIAL SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006

Material Safety Data Sheet acc. to ISO/DIS 11014

Safety Data Sheet. Fatal if swallowed, in contact with skin or if inhaled. Causes severe skin burns and eye damage. Fatal if inhaled.

Material Safety Data Sheet

Safety Data Sheet C3 Extraction Solution

GHS SAFETY DATA SHEET (SDS)

1 PRODUCT AND COMPANY IDENTIFICATION. Manufacturer. Description: Natural occuring clay mineral SDS. GHS Safety Data Sheet. PROFILE Products, LLC

Material Safety Data Sheet acc. to ISO/DIS 11014

The Globally Harmonized System (GHS) for Hazard Classification and Labelling. Development of a Worldwide System for Hazard Communication

HazCom and Global Harmonization Are You In Compliance? BISC June, 2018

Material Safety Data Sheet acc. to ISO/DIS 11014

Material Safety Data Sheet. ACS Material Graphene Quantum Dots (GQDs)

Material Safety Data Sheet

Changes to Materials Data Safety Sheets (MSDS)

Material Safety Data Sheet acc. to ISO/DIS Identification of the substance/mixture and of the company/undertaking

HAZARD COMMUNICATION and GHS. Environmental Health and Safety

1 PRODUCT AND COMPANY IDENTIFICATION. Manufacturer. HAZARDS IDENTIFICATION Classification of the Substance or Mixture

1. 4. E m e r g e n c y te l e p h o n e n u m b e r : Infotrac (Contract# ) Dial when outside the US

LABORATORY CHEMICAL HYGIENE PLAN

The Globally Harmonized System (GHS) for Hazard Classification and Labelling. Development of a Worldwide System for Hazard Communication

Material Safety Data Sheet acc. to ISO/DIS Identification of the substance/mixture and of the company/undertaking

Material Safety Data Sheet. ACS Material Graphene Nanoplatelets

MSDS. ( Material Safety Data Sheet ) High Density Polyethylene (LUTENE-H ME9180)

Safety Data Sheet. 1. Identification of the Substance/Mixture and the Supplier. 2. Hazards Identification

The Globally Harmonized System (GHS) for Hazard Classification and Labeling. Development of a Worldwide System for Hazard Communication

PUBLIC EMPLOYEE HAZARDOUS CHEMICAL PROTECTION AND RIGHT TO KNOW ACT O.C.G.A

Material Safety Data Sheet acc. to ISO/DIS 11014

Hazard Communication. What You Need to Know. Southeastern OSHA Training Institute Education Center

开原亨泰精细化工厂. Kaiyuan Hengtai Fine Chemicals Factory. Material Safety Data Sheet. 4-Aminobutyric acid. Approved By IATA Regulation

HAZARD COMMUNICATION PROGRAM

HAZARD COMMUNICATION PROGRAM

Hazard Communication Training Script

MATERIAL SAFETY DATA SHEET. QuickGene DNA whole blood kit S KURABO INDUSTRIES LTD. Bio-Medical Department

Material Safety Data Sheet C3 Extraction Solution

Global Harmonizing System GHS

HAZARDOUS COMMUNICATION AND GLOBAL HARMONIZED SYSTEM. ASU San Angelo, TX

Safety Data Sheet acc. to OSHA HCS

Globally Harmonized Systems. Presented By: Jill Kozrowski-Environmental Health & Safety Manager Land O Frost Inc. Lansing, IL

SAFETY DATA SHEET 1 IDENTIFICATION.

CHEMTREC: (For USA, and Canada) CHEMTREC: (For all other Countries)

Product Stewardship Summary

Arizona Division of Occupational Safety and Health Administration. 800 W. Washington Street, Phoenix, AZ Consultation:

Associates of Cape Cod, Inc.

Transcription:

SUBSTANCE NAME Ammonium Sulphate Ammonium sulfate Ammoniumsulfat Diammonium sulphate Di-ammonium sulfate Sulfuric acid di-ammonium salt Sulfuric acid di-ammonium salt (1:2) Mascagnite GENERAL STATEMENT Ammonium Sulphate is a white odorless solid product. It is mainly used for fertilizer applications, but it has various other uses in the chemical and pharmaceutical industry as well as for insecticides, herbicides, fungicides and flame retardants. Consumer applications are such that consumer exposure will typically be infrequent, for brief periods and to small quantities or low concentrations. Ammonium Sulphate is not known to cause adverse human health or environmental effects and it is not classified as a dangerous product. The usual general precautionary measures to prevent worker and environmental exposure to chemicals should also be taken when handling Ammonium Sulphate in industrial uses. No other specific risk management measures are required. CHEMICAL IDENTITY EC Name: ammonium sulphate EC-No. : 231-984-1 CAS-No. : 7783-20-2 Molecular formula: H3N.1/2H2O4S Structural formula: USES AND APPLICATIONS Ammonium Sulphate is obtained by neutralization of sulphuric acid and/or oleum with ammonia. Ammonium Sulphate can also be obtained in the caprolactam manufacturing process. The primary application of Ammonium Sulphate is as a fertilizer. Besides that, it is used in a variety of applications. It is used as a phcorrective agent and as chemical intermediate in a range of chemical manufacturing processes. It finds also application in insecticides, herbicides and fungicides, as an ingredient in pharmaceutical and cosmetic products, as well as in flame retardants and as laboratory chemicals. Although the substance may be contained in certain products for professional or consumer use, Ammonium Sulphate is mainly applied in pure or more concentrated form in products for industrial use. April 3 rd, 2012 Page 1

PHYSICAL CHEMICAL PROPERTIES Ammonium Sulphate is a white odorless crystalline solid at room temperature and pressure. Melting point/range: >280 C Boiling point/boiling range: Not applicable, as the substance decomposes before boiling Decomposition temperature: 280 C Flammability (solid, gaseous): Product is not flammable. It does not release flammable gases in contact with water. Ignition temperature: Not determined Explosion limits: Lower: Not determined Upper: Not determined Molecular weight: 132.1395 g/mol ph value: 5-6 log Pow: Not applicable Vapor pressure: 4.053E-9 hpa at 25 C Relative density: 1.77 g/cm3 at 25 C Dissociation constant: Not applicable, as the substance is a salt Solubility in/miscibility with water: 767 g/l (at 20 C) HEALTH EFFECTS Ammonium Sulphate is not classified as a hazardous substance. Its acute toxicity is low via all exposure routes. Studies have not shown long term effects or CMR properties. Ammonium Sulphate has neither irritant nor sensitizing properties. If it is taken up in the body via ingestion or inhalation, then it dissociates in the ammonium and sulphate ions (NH4 +, SO4 2-). Ammonium is an endogenous substance that serves a major role in the maintenance of the acid-base balance. Sulphate is a normal intermediate in the metabolism of endogenous sulphur compounds and is excreted unchanged or in conjugated form in urine. Inhalation of ammonium in dust form should be avoided. EFFECT ASSESSMENT Acute Toxicity (oral/dermal/inhalation) Irritation/Corrosivity (skin/eye/respiratory tract) Sensitization (skin/respiratory tract) Repeated Exposure Mutagenicity Carcinogenicity Reproductive Toxicity RESULT Ammonium Sulphate is of low acute toxicity via oral, skin and inhalation routes of exposure. Ammonium Sulphate is not irritating to the skin or to the eyes. Based on the available data Ammonium Sulphate is not considered to have skin or respiratory sensitization properties. There is no information related to repeated exposure via the inhalation route. The information on repeated exposure via the oral and dermal route suggests that there is no marked repeated dose toxicity. Available in/vitro and in/vivo data indicate that Ammonium Sulphate does not cause mutagenic effects. No evidence of a carcinogenic potential was observed in carcinogenicity studies addressing oral exposure. Studies have not shown any fertility and teratogenicity effects. Therefore Ammonium Sulphate is not considered as toxic for reproductivity. April 3 rd, 2012 Page 2

ENVIRONMENTAL EFFECTS In aqueous solution, ammonium salts are completely dissociated into the ammonium ion and the corresponding anion, in this case the sulphate ion. Un-ionized ammonia (NH3) exists in the aquatic environment and the fraction of un-ionized ammonia steeply increases with elevated ph value or temperature. It is well known that toxicity to aquatic organisms has been attributed to un-ionized ammonia species, and NH4 + species is considered to be non- or significantly less-toxic. Therefore toxicity values for ammonium salts (such as: ammonium -sulphates, phosphates, carbonates, chlorides or nitrates), where the major toxic component is ammonia, can be considered as equivalent. EFFECT ASSESSMENT Aquatic Toxicity FATE AND BEHAVIOR Biodegradation Bioaccumulation potential PBT/vPvB conclusion RESULT Ammonium Sulphate is almost totally dissociated in ammonium and sulphate ions in water. Depending on the ph of the water the ammonium- ion is in equilibrium with some unionized ammonia. The concentration of free ammonia is generally low. Therefore the overall aquatic toxicity of Ammonium Sulphate is also low. RESULT Biodegradation criteria do not apply due to the inorganic nature of Ammonium Sulphate and its presence in the environment in ionic form. Bioaccumulation is not expected due to the high water solubility and the ionic nature of Ammonium Sulphate. Ammonium Sulphate does not meet the criteria for PBT and vpvb classification. EXPOSURE Human Health Exposure can occur either in Ammonium Sulphate manufacturing facilities, by other industrial users of Ammonium Sulphate or by professional users. Based on its physical properties, ingestion or skin contact are the most likely routes of exposure. Of all uses of Ammonium Sulphate the uses in insecticides, herbicides and fertilizers are probably the only ones that may cause some degree of exposure to the general population. However, in these applications the general population is only exposed to Ammonium Sulphate in diluted form. Consumer applications are such that consumer exposure will typically be infrequent, for brief periods or in small quantities. Therefore the use of Ammonium Sulphate by the consumer is not considered to pose a health risk. Environment Ammonium Sulphate occurs in the environment only in its dissociated form, i.e. as ammonium and sulphate ions. Therefore there is no environmental exposure to Ammonium Sulphate itself. The ammonium ion is in equilibrium with non-ionized ammonia, which itself is a harmful substance. However, under typical environmental conditions, the concentration of non-ionized ammonia is so low that it poses no risk. Therefore, all uses of Ammonium Sulphate are considered to be safe for the environment. April 3 rd, 2012 Page 3

RISK MANAGEMENT RECOMMENDATIONS Ammonium Sulphate is not known to cause adverse human health or environmental effects. However it is a good practice to train personnel that handle the substance and to protect workers who may be exposed to Ammonium Sulphate by taking the usual precautionary measures to protect against chemical exposure. Therefore protective clothing, gloves and safety glasses with side shields should be worn when handling Ammonium Sulphate. It is recommended to prevent the formation of dust, to avoid contact with eyes, skin and clothing. Good ventilation at the workplace should be provided and local suction extraction should be installed if dust formation cannot be avoided. Respiratory protection should be worn if local extraction is absent or insufficient. Soiled and contaminated clothing should be removed. Ammonium Sulphate should be kept away from foodstuffs, beverages and feed. Workers should not eat, drink, smoke or sniff while working with the product and they should wash their hands before breaks and at the end of work. Ammonium Sulphate should be stored in dry conditions and away from water, alkaline substances, nitrites and nitrates. For environmental protection in case of accidental release: do not allow product to reach sewage system or any water course. Retain and dispose of contaminated wash water. STATE AGENCY REVIEW This substance has been registered under REACH (EC) No. 1907/2006. Ammonium Sulphate is included in the OECD list of High Production Volume (HPV) chemicals. Ammonium Sulphate is listed in the following Chemical Inventories: TSCA, EINECS, ENCS, AICS, Canadian DSL, KECI, PICCS, IECSC, and NZIoC. REGULATORY INFORMATION/CLASSIFICATION AND LABELING Classification of the substance according to REGULATION (EC) No 1272/2008: Not classified. Labeling according to REGULATION (EC) No 1272/2008: Pictogram: none Signal word: none Hazard statements: none CONTACT INFORMATION WITHIN COMPANY For further information on this substance or product safety summaries in general, please contact: Company: UBE Chemical Europe, S.A Department: Corporate Social Responsibility Address: Poligono Industrial El Serrallo, s/n Town/Country: Grao de Castellon (Castellon), Spain Postal code: 12100 E-mail: sds.ube.eu@ube.es Additional information can be found at: http://www.ube.es http://www.icca-chem.org/en/home/icca-initiatives/global-product-strategy/ April 3 rd, 2012 Page 4

GLOSSARY Acute toxicity AICS Biodegradation Bioaccumulation Canadian DSL Carcinogenicity CAS Chronic toxicity EINECS ENCS Flash point Genotoxicity GHS HPV Hydrolyze IECSC Intermediate KECI Monomer Mutagenicity NZIoC PBT Persistence PICCS Risk Management Measures Harmful effect resulting from a single or short term exposure to a substance. Australian Inventory of Chemical Substances. Decomposition or breakdown of a substance under natural conditions (actions of micro-organisms etc). Progressive accumulation in living organisms of a chemical substance present in the environment. Domestic Substances List of Canada. Substance effects causing cancer. Chemical Abstracts Service (division of the American Chemical Society). Harmful effect after repeated exposures or long term exposure to a substance. European Inventory of Existing Commercial Chemical Substances Existing Notified Chemical Substances (Japan). The lowest temperature at which vapor of the substance may form an ignitable mixture with air. Substance effect that causes damage to genes, including mutagenicity and clastogenicity. Globally Harmonized System of Classification and Labeling of Chemicals High Production Volume Chemicals. Undergo hydrolysis; decompose by reacting with water. Inventory of Existing Chemical Substances Produced or Imported in China. Substance that is manufactured for and consumed in or used for chemical processing in order to be transformed into another substance. Korean Existing Chemical Inventory. Means a substance which is capable of forming covalent bonds with a sequence of additional like or unlike molecules under the conditions of the relevant polymer-forming reaction used for the particular process. Substance effect that cause mutation on genes. New Zealand Inventory of Chemicals Persistent, bioaccumulative, toxic chemical. Refers to the length of time a compound stays in the environment, once introduced. Philippine Inventory of Chemicals and Chemical Substances. Engineering controls, conditions and protective equipment needed to be implemented to ensure that the risks to human health and the environment are adequately controlled. April 3 rd, 2012 Page 5

REACH (EC) No. 1907/2006 REGULATION (EC) No 1272/2008 Reprotoxicity Sensitizing Sediment TSCA Vapor pressure vpvb European Commission Regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. European Commission Regulation on Classification, Labeling and Packaging of Substances and Mixtures. Including teratogenicity, embryotoxicity and harmful effects on fertility. Allergenic. Topsoil, sand and minerals washed from land into water forming in the end a layer at the bottom of rivers and sea. Toxic Substance Control Act (USA). A measure of a substance s property to evaporate. Very persistent, very bio-accumulative. DATE OF ISSUE April 2012 REVISION Version 1.0 DISCLAIMER The information contained in this paper is intended as advice only and whilst the information is provided in utmost good faith and has been based on the best information currently available, is to be relied upon at the user s own risk. No representations or warranties are made with regards to its completeness or accuracy and no liability will be accepted by UBE Chemical Europe, S.A for damages of any nature whatsoever resulting from the use of or reliance on the information. April 3 rd, 2012 Page 6