Approval Sheet MODEL NAME PART NUMBER CUSTOMER NAME CUSTOMER P/NO. APPROVED DATE SMD LED DBL-3030AZ-C Shenzhen DongBei Technology Co,.Ltd. 7F,NO.711,210 west,tairan industrial park., Futian,Shenzhen Tel:0755-23820456 Fax:0755-28156077 http://www.dongbei.com
DONPER Mobile Flash LED AM - WH303012AZ - C Datasheet DONPER is designed for high current and high luminous power application fields. Superior thermal conductivity and high luminous efficiency based on ceramic substrate will provide highest level of flux output and thermal management. Furthermore, DONPER LEDs exclusive package is ideal solution for ease of use and convenience of customer self design. Features Package : Ceramic package Typical Luminous Flux : 15 cd @ 150mA Color Temperature : 5000 ~ 8500K Thermal Resistance : 14 C/W RoHS Compliant Application Mobile flash lighting LCD TV / Monitor backlighting Indoor and outdoor architectural lighting Aircraft / Car / Bus reading lamp 17-1
Part Number MSL-3030AZ-C Revision Date Revision No. Summary of Revision Remark 2012.01.02 00 Newly Establishments 2012.05.01 01 Changing chip 2012.10.10 02 Changing Specification 2
1. Outline Dimension Note All dimensions are in millimeters 3
2. Specification 2-1. Absolute Maximum Ratings Characteristic Symbol Ratings Unit Power Dissipation Pd 0.5 W Forward Current IF 150 ma Peak Forward Current [1] IFP 500 ma Operating Temperature Iopr -30 to +85 Storage Temperature Tstg -40 to +100 2-2. Electrical Characteristics at I F = 150 T A = 25 C Characteristics Symbol Min. Typ. Max Unit Luminous Intensity [2] @ 150mA E, F, G Rank Iv 10-20 cd Φv 25-50 lm Forward Voltage [3] VF 3.0-3.7 V Color Rendering Index [4] CRI 65 70 75 - Color Temperature CCT 5000-8500 K Viewing Angle (FWHM) 2Θ½ - 120 - deg Note [1] Duty Ratio 1/10, Pulse Width 100ms [2] Luminous flux measurement tolerance : ± 10 % [3] Forward voltage measurement tolerance : ± 0.1 [4] Cool White Typical CRI : 70, 4
3. Sorting Table 3-1. Luminous Intensity Table 3-2. Forward Voltage Table Code Min Intensity [cd] Max Code Min Voltage [V] Max A 10 20 A 3.0 3.7 Note Luminous flux measurement tolerance : ± 10 % Forward voltage measurement tolerance : ± 0.1V 5
3-3. Cx, Cy, CCT Table Cool White Bin Rank CA CB Cx Cy Cx Cy 0.3030 0.2820 0.3235 0.3132 0.2930 0.3100 0.3208 0.3520 0.3208 0.3520 0.3462 0.3905 0.3235 0.3132 0.3440 0.3447 Note Color Coordinate measurement tolerance : ± 0.005 6
4. Characteristic Diagrams 4-1. Luminous Intensity vs. Forward Current Characteristics, based on T A = 25 C 4-2. Forward Current vs. Forward Voltage Characteristics, based on T A = 25 C 7
4-3. Luminous Intensity vs. Wavelength Distribution, based on T A = 25 C 4-4. Luminous Intensity vs. Angle Distribution, based on T A = 25 C 5. Part Numbering 8
Number 1 WH WP Color Normal White Whitening White Number 2 Package size (mm) 2016 2.0*1.6 3030 3.0*3.0 5050 5.0*5.0 9070 9.0*7.0 Number 3 Size (mm) 07 0.75 12 1.2 17 1.7 38 3.8 Number 4 Chip Number A 1 B 2 C 3 D 4 Number 5 V Z N Information Varistor Included Zener Diode Included Normal Package Number 6 Power (W) Number 6 Power (W) A 0.1 G 1.5 B 0.3 H 2.0 C 0.5 I 2.5 D 0.8 J 3.0 E 1.0 K 4.0 F 1.3 L 5.0 9
6. Packing Specifications (1) Dimensions of Carrier Tape Material: PS, Conductivity: Ω ~ Ω (2) Dimensions of Reel Material: PS, Conductivity: Ω ~ Ω 10
(3) Packing Each reel is sealed in an antistatic shielding bag with silica gel. 1) Reel 2) Shield Bag (2000ea) 3) Out Box (20000ea) 11
7. Soldering Profile Solder conditions Reflow Soldering Manual Soldering Lead solder Lead-free [1] Lead Solder Lead-free [1] Pre-heating 140 ~ 160 C 180~200 C Temperature max. 300 C max. 350 C. Pre-heat time 60 ~ 120 sec. 120 sec. Time max. 3 sec. max. 3 sec. Peak temperature max. 240 C max. 260 C Soldering time max. 5 sec. max. 5 sec. No multiple soldering allowed *After reflow soldering, rapid cooling should be avoided. [1] : N2 reflow is recommended Temperature profile 12
8. Storage Condition In order to avoid the absorption of humidity in storage, this product is water proof packed Temperature : 5 ~30 Humidity : Less than 60% RH 9. Treatment after opening 1) Please make a soldering within 2 day after opening under following conditions : Temperature : 5 ~ 30 Humidity : Less than 60% RH 2) In case the devices are not used for a long time after opening, the storage in dry box is recommendable. Or it is better to repack the devices with a silica-gel by the sealer, and put them in the same storage condition as 9-1). Then they should be used within 2 weeks 3) Please make a soldering after a following baking treatment if unused term should be over the conditions of 9-2). In taping : Temperature : 60 Maintain time : 9 ~ 10 Hours In individual (or PWB) : Temperature : 110 Maintain time : 3 ~ 4 Hour 13
10. Reliability Test Conditions Test Items Test Conditions Hours/Cycles Test Item Heat Resistance test (High Humidity, High Temperature Storage + Reflow + Temperature Shock Cycle) T a =85, RH=85% Storage 24hrs 260,10Sec Reflow 3 times -40 ~ 110 60min 30 cycles Forward Voltage High Humidity, Temperature Life test High Humidity, Temperature On/OFF test Durability Life test T a =85, RH=85% @ 150mA T a =85, RH=85% Pulse Width 100msec, Duty Ratio 1/10 @ 500mA T a =65, RH=93% ~ -10 @ 150mA Durability Storage test T a =65, RH=93% ~ -10 120hrs 100,000 cycles 5 times Luminous Intensity, Flux 11. Criteria For Judging The Damage Conditions Items Symbol Test Conditions Min Limit Max Forward Voltage V F I F = 150mA L.S.L + 0.1 Luminous Intensity, Flux Φv I F = 150mA L.S.L * 0.5 Note U. S. L : Upper Standard Level L. S. L : Lower Standard Level 14
12. Precaution for use 1. This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA should be used. 2. When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. 3. LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3months or more after being shipped from DONPER, a sealed container with a nitrogen atmosphere should be used for storage. 4. The LEDs must be used within seven days after opening the moisture proof packing. Repack unused Products with anti-moisture packing, fold to close any opening and then store in a dry place. 5. The appearance and specifications of the product may be modified for improvement without notice. 6. This LED is sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. On manual soldering, a solder tip must be needed as grounded for usage. If over voltage which exceeds the absolute maximum rating is applied to LEDs, it will cause damage LEDs and result in destruction. Damaged LEDs will show some unusual characteristics such as leak current remarkably increase, turn-on voltage becomes lower and the LEDs get unlighted at low current. 15