eatures Super-luminosity chip LED. White SMT package. Built in Red, Green, and Blue chips. Lead frame package with individual 6 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free. The product itself will remain within RoHS compliant version. Descriptions Due to the package design, 61-236 has wide viewing angle, low power consumption and adjusting each color is possible thanks to serial connection by 6 terminal connection (Individual driving by each terminal) in case of using several number of LED. And makes it ideal for light pipe application. Applications Amusement equipment. Information boards. lashlight for digital camera of cellular phone. Device Selection Guide Type Chip Material Emitted Color Resin Color RS AlGaInP Brilliant Red GB InGaN Brilliant Green Water Clear B7 InGaN Blue Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 1 of 14 Device No.: Prepared date: 3-Jun-28 Prepared by: Josh Chou
Package Outline Dimensions 1 2 + Red 3 4 + Green 5 6 Polarity + Blue Recommend solding pad design Note: The tolerances unless mentioned is ±.1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 2 of 14 Device No.: Prepared date: 3-Jun-28 Prepared by: Josh Chou
Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Unit Reverse Voltage V R 5 V RS 5 orward Current I GB 3 ma B7 3 RS 1 Peak orward Current (Duty 1/1 @ 1KHZ) I P GB 1 ma B7 1 RS 12 Power Dissipation Pd GB 11 mw B7 11 Electrostatic Discharge(HBM) ESD 1 V Operating Temperature Topr -4 ~ +85 Storage Temperature Tstg -4~ +9 Soldering Temperature Tsol Reflow Soldering : 26 for 1 sec. Hand Soldering : 35 for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 3 of 14 Device No.: Prepared date: 3-Jun-28 Prepared by: Josh Chou
Electro-Optical Characteristics (Ta=25 ) Parameter Symbol Min. Typ. Max. Unit Condition RS 45 ----- 9 Luminous Intensity Iv GB 9 ----- 18 mcd I =2mA B7 225 ----- 45 Viewing Angle 2θ 1/2 ----- 12 ----- deg I =2mA RS ----- 632 ----- Peak Wavelength λp GB ----- 518 ----- nm I =2mA B7 ----- 468 ----- Dominant Wavelength λd RS 617.5 ----- 629.5 GB 525 ----- 535 B7 465 ----- 475 nm I =2mA Spectrum Radiation Bandwidth λ RS ----- 2 ----- GB ----- 35 ----- B7 ----- 35 ----- nm I =2mA RS 1.75 ----- 2.35 orward Voltage V GB 2.75 ----- 3.95 V I =2mA B7 2.75 ----- 3.95 RS ----- ----- 1 Reverse Current I R GB ----- ----- 5 μa V R =5V B7 ----- ----- 5 Notes: 1.Tolerance of Luminous Intensity: ±11% 2.Tolerance of Dominant Wavelength: ±1 nm 3.Tolerance of orward Voltage: ±.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 4 of 14 Device No.: Prepared date: 3-Jun-28 Prepared by: Josh Chou
Bin Range of Luminous Intensity Symbol Bin Code Min. Max. Unit Condition U1 45 565 RS U2 565 715 V1 715 9 V2 9 112 GB W1 112 142 mcd I =2mA W2 142 18 S2 225 285 B7 T1 285 36 T2 36 45 Bin Range of Dominant Wavelength Symbol Bin Code Min. Max. Unit Condition E4 617.5 621.5 RS E5 621.5 625.5 E6 625.5 629.5 GB Y 525 53 Z 53 535 nm I =2mA X 465 47 B7 Y 47 475 Notes: 1.Tolerance of Luminous Intensity: ±11% 2.Tolerance of Dominant Wavelength: ±1 nm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 5 of 14 Device No.: Prepared date: 3-Jun-28 Prepared by: Josh Chou
Bin Range of orward Voltage Symbol Bin Code Min. Max. Unit Condition 1 1.75 1.95 RS 2 1.95 2.15 3 2.15 2.35 5 2.75 3.5 GB 6 3.5 3.35 7 3.35 3.65 V I =2mA 8 3.65 3.95 5 2.75 3.65 B7 6 3.5 3.5 7 3.35 3.65 8 3.65 3.95 Note: Tolerance of orward Voltage: ±.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 6 of 14 Device No.: Prepared date: 3-Jun-28 Prepared by: Josh Chou
Typical Electro-Optical Characteristics Curves (RS) Relative luminous intensity (%) Relative luminous intensity (%) 1 75 5 25 1 1 1 55 1-6 Spectrum Distribution Relative Luminous Intensity vs. Ambient Temperature -4-2 2 4 6 6 65 7 75 Wavelength λ (nm) 8 Ambient Temperature T a( C) 1 orward Current I (ma) Relative luminous intensity (%) 5 4 3 2 1 1.2 1 1 1 1 orward Current vs. orward Voltage 1.6 2. 2.4 2.8 3. orward Voltage V (volts) Relative Luminous Intensity vs. orward Current f=1khz Duty=1/1 1 1 orward Current I (ma) 1 1 2 8 7 orward Current Derating Curve Radiation Diagram 1 2 3 orward Current I (ma) 6 5 4 3 2 1 2 4 6 8 1 1..9.8.7 4 5 6 7 8 9.5.3.1.2.4.6 Ambient Temperature T ( C) a Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 7 of 14 Device No.: Prepared date: 3-Jun-28 Prepared by: Josh Chou
Typical Electro-Optical Characteristics Curves (GB) Relative luminous intensity (%) Spectrum Distribution 1 75 5 25 45 5 55 6 65 Wavelength λ (nm) orward Current I (ma) 5 4 3 2 1 2.4 orward Current vs. orward Voltage 2.6 2.8 3.2 3.6 orward Voltage V (V) 4. Relative luminous intensity (%) 1 1 1 1-6 Relative Luminous Intensity vs. Ambient Temperature -4-2 2 4 6 Ambient Temperature T ( C) a 8 1 Relative luminous intensity (%) 1 1 1 1 1 Relative Luminous Intensity vs. orward Current f=1khz Duty=1/1 1 1 1 2 orward Current I (ma) I (ma) 6 5 Radiation Diagram 1 2 3 orward Current 4 3 2 1 2 4 6 8 1 1..9.8.7.5.3.1.2.4.6 4 5 6 7 8 9 Ambient Temperature T ( C) a Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 8 of 14 Device No.: Prepared date: 3-Jun-28 Prepared by: Josh Chou
Typical Electro-Optical Characteristics Curves (B7) Relative luminous intensity (%) 1 75 5 25 35 Spectrum Distribution 4 45 5 55 Wavelength λ (nm) orward Current I (ma) 5 4 3 2 1 2.4 orward Current vs. orward Voltage 2.6 2.8 3.2 3.6 orward Voltage V (V) 4. Relative luminous intensity (%) 1 1 1 1-6 Relative Luminous Intensity vs. Ambient Temperature -4-2 2 4 6 Ambient Temperature T ( C) a 8 1 Relative luminous intensity (%) 1 1 1 1 1 Relative Luminous Intensity vs. orward Current f=1khz Duty=1/1 1 1 1 2 orward Current I (ma) I (ma) 6 5 Radiation Diagram 1 2 3 orward Current 4 3 2 1 2 4 6 8 1 Ambient Temperature T ( C) a 1..9.8.7.5.3.1.2.4.6 4 5 6 7 8 9 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 9 of 14 Device No.: Prepared date: 3-Jun-28 Prepared by: Josh Chou
Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank RE: orward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±.1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 1 of 14 Device No.: Prepared date: 3-Jun-28 Prepared by: Josh Chou
Carrier Tape Dimensions: Loaded Quantity 8 pcs Per Reel Note: The tolerances unless mentioned is ±.1mm; Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 11 of 14 Device No.: Prepared date: 3-Jun-28 Prepared by: Josh Chou
Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level:9% LTPD:1% No. Items Test Condition 1 Reflow Soldering 2 Temperature Cycle 3 Thermal Shock Temp. : 26 ±5 Min. 5sec. H : +1 15min 5 min L : -4 15min H : +1 5min 1 sec L : -1 5min Test Sample Hours/Cycles Size Ac/Re 6 Min. 22 PCS. /1 3 Cycles 22 PCS. /1 3 Cycles 22 PCS. /1 4 High Temperature Storage Temp. : 1 1 Hrs. 22 PCS. /1 5 Low Temperature Storage Temp. : -4 1 Hrs. 22 PCS. /1 6 DC Operating Life I = 2 ma 1 Hrs. 22 PCS. /1 High Temperature / High 7 Humidity * or each die 85 / 85%RH 1 Hrs. 22 PCS. /1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 12 of 14 Device No.: Prepared date: 3-Jun-28 Prepared by: Josh Chou
Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 3 or less and 9%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 3 or less and 6% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 6±5 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 1~5 C / Sec. Pre-heating 18~2 C 6 Sec. Max. Above 22 C 26 C. Max. 1 Sec. Max. 12 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 35 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 13 of 14 Device No.: Prepared date: 3-Jun-28 Prepared by: Josh Chou
5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, ax: 886-2267-6244, 2267-6189, 2267-636 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 14 of 14 Device No.: Prepared date: 3-Jun-28 Prepared by: Josh Chou