ELECTRONIC CIRCULATORS FOR HEATING AND COOLING SYSTEMS. ErP. eady

Similar documents
ELECTRONIC WET ROTOR CIRCULATORS

ELECTRONIC CIRCULATORS FOR HEATING AND COOLING SYSTEMS

EVOTRON WET ROTOR ELECTRONIC CIRCULATORS TECHNICAL DATA APPLICATIONS ADVANTAGES

ELECTRONIC WET ROTOR CIRCULATORS

SUBMERSIBLE PUMPS FOR SEWAGE

NKVE VERTICAL AXIS MULTISTAGE CENTRIFUGAL PUMPS WITH MCE/P INVERTER

50/60 Hz. ecocirc XL and XLplus. high efficiency WET ROTOR circulators. ErP 2009/125/EC

K DOUBLE-IMPELLER DOUBLE-IMPELLER ELECTRIC PUMPS

SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS in cast iron

CMA - B - C - D - CMR

High-efficiency Circulator Pump. Rio-Eco N / Rio-Eco Z N. Type Series Booklet

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps

Calio-Therm NC Type Series Booklet

Direct-operated 2/2-way compact solenoid valves Type EV210A

Solenoid valves 2/2-way direct-operated type EV210A

CME / CM-GE / DCME IN-LINE CONSTANT PRESSURE PUMPS. TECHNICAL DATA - CME/CM-GE single flanged

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps

IL series. Centrifugal marine IN-LINE pumps

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps

DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, 3x400V AP-, AKP- and AEP- series, threaded G1/2 G1 ¼ LOREM IPSUM JE ZULT MAAR 60 HZ.

Contents. Identification LHC. Horizontal split case pumps. Type key. Identification Type key

Circulation pumps CATALOGUE. Wet rotor circulators and accessories. Heating, air-conditioning, solar, domestic water

barmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"

Contents. Performance Curves/Technical Data. General Data Performance Range Sectional Drawing TPH 2T TPH 4T TPH 8T TPH 12T TPH 25T TPH 50T

TPH Series 50Hz Multi-stage Centrifugal Pump

TPH. 60Hz. Standard mode TPH 4T 2K. Code TPH 4T 2K S F A H

EVOPLUS SMALL / EVOPLUS SMALL SAN

ELECTRONIC CIRCULATORS FOR SMALL COMMUNITY HEATING AND AIR CONDITIONING SYSTEMS

Direct-operated 2/2-way solenoid valves Type EV210B

50 Hz n= 2900 rpm. Standardised EN 733 centrifugal pumps INSTALLATION AND USE. PERFORMANCE RANGE Flow rate up to 6000 l/min (360 m³/h) Head up to 98 m

MULTISTAGE CENTRIFUGAL PUMP TPH 2/4/8/12/25/50T. 50Hz. WALRUS PUMP ISO 9001 Certified

Prima range. Alifter range. magnetical driven pumps in thermoplastic materials TMP TMA. centrifugal. self-priming

NM, NMD 60 Hz NM, NMD. Close Coupled Centrifugal Pumps with threaded ports

Flow rates to 750 l/min

Flow rates to 750 l/min

SERIES. Maximum pressure 8 bar

VOLUMEC. Valve Position Indicator 5

Single Phase Motors Technical Datasheets

VD1 CLC. Small Valves DIN-range with a higher k v -value

Flow rates to 475 l/min

Standardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H

KLME - KLPE / DKLME - DKLPE IN-LINE CONSTANT PRESSURE PUMPS

KLM / KLP / DKLM / DKLP TECHNICAL DATA - KLM/KLP SINGLE WITH OVAL FLANGES HEATING, AIR CONDITIONING, SOLAR PANEL AND HOT WATER SYSTEM IN-LINE PUMPS

Working pressure. 320 bar. Style T. Style D. Style S. Style B B B D.I. D.I. D.I. D.I.

GRUNDFOS PRODUCT GUIDE. VersaFlo UP, UPS. Series 200 circulator pumps 60 Hz

Single Phase Motors Technical Datasheets

LES. Single-stage end-suction pumps Identification Type key

SERIES FMP. Working pressure. 280 bar. Style D Style V Style Z. Style T. Style B. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.

Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS. No. E14/A1

CHINA MP FILTRI P.O. Box Shanghai Phone: Fax:

Flow rates to 485 l/min

Flow rates to 485 l/min

SERIES INLINE FILTERS LMP 210. Maximum pressure 60 bar Maximum flow to l / mi n

Working pressure. 420 bar. Style T. Style B. Style D Style V Style Z. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.

P U M P S. The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 50Hz

Flow rates to 485 l/min

PiB Series. PiB (Pump-in-a-Box) 4380 & 4392 Series

e-mp Series MPA, MPR, MPD, MPV Lenntech 50 Hz Tel Fax

Pneumatic Universal. Actuator MOTORIZED VALVES USE TECHNICAL FEATURES OF THE ACTUATOR. Data sheet

P U M P S. The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 50Hz

VDN2.. VEN2.. VUN2.. Radiator valves. Building Technologies HVAC Products ACVATIX TM. NF norm, for 2-pipe heating systems

DEBEM IM VERTICAL CENTRIFUGAL PUMPS.

14:1400 (0206) KRAL Volumeter - OMG

60 Hz. e-nsc Series HORIZONTAL CENTRIFUGAL ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS

TPH Series WALRUS PUMP. Multi-stage Centrifugal Pump. All specifications are subject to change without notice. 014

Accumulators Virginia KMP Suction Line Accumulators

Polígono Indutrial O Rebullón s/n Mos - España -

ANSI - CURVE BOOK CHEMICAL PROCESS PUMPS

SITRANS F flowmeters. SITRANS F US System information SITRANS F US Ultrasonic flowmeters 4/181

Polígono Indutrial O Rebullón s/n Mos - España -

A wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel.

IBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap

IBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap

The FLUX F 430 with mechanical seal

PREMIUM PM Automatic horizontal sliding car door EN compliance

CALEFFI. Modulating digital controller for heating and cooling. 161 series 01122/08 GB. replaces dp 01122/05

ISO-C Series chemical Pump

Pressure transmitters for industrial applications MBS 32 and MBS 33

HiPace 300 with TC 110 and power supply pack OPS 100, DN 100 CF-F

CV3000 Series. Characterized Insert Control Valves

High Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min

Return fi lters. FRI series. Maximum pressure up to 20 bar - Flow rate up to 1500 l/min. Return fi lters

Relative pressure transmitter type 520

Temperature field study of hot water circulation pump shaft system

HiPace 1200, with TC 1200, DN 200 CF-F

Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00

JET GENERAL DATA JET JET JET DAB PUMPS reserve the right to make modifications without prior notice

Facts and figures MULTILIFT SELECT 15

Schlüter -KERDI-SHOWER. System components for floor level showers

50 Hz. e-lne Series SINGLE IN-LINE ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS. ErP 2009/125/EC

Standardized Chemical Pumps to EN /ISO 2858/ISO 5199 sealless, with magnetic drive. Fields of Application. Designation. Design.

SVH with HYDROVAR (HVL range)

PRO-CLEAN STRATIFIED TANK

DVZ. Vortex Flowmeter Compact. for low viscosity liquids. Range: l/min. Accuracy: ±2.5% of full scale. p max : 20 bar; t max : 80 C

SMB20, SMB30 Series. UK market only

1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA:

Turbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas

Air Cooler Industry AC-LN 1-7 / ACA-LN 2-7 / ACAF-LN 2-7

PRESSURE GAUGE SELECTORS

Transcription:

ELECTRONIC CIRCULATORS OR EATING AND COOLING SYSTEMS ErP eady

TECNICAL DATA EVOSTA 2 WET ROTOR ELECTRONIC CIRCULATORS Operating range:,-3,6 m 3 /h with head up to 6,9 metres. Pumped liquid temperature range: from -1 C to +11 C Working pressure: 1 bar (1 kpa) Protection class: IPX Insulation class: Installation: with horizontal motor axis Standard power input:: single-phase 1x23 V~ /6 z Pumped liquid Clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 3%). in line with European Directive ErP 29/12/EC (formerly EuP) of 21 APPLICATIONS Low energy consumption electronic pump for water circulation in all types of domestic heating and cooling systems. ADVANTAGES The new range of EVOSTA 2 circulators by DAB combines the strength of an mechanical circulator with the benefits of the electronic circulator. Thanks to the permanent magnet synchronous motor, the frequency converter and the energy efficiency of EEI.1, as well as the protection class IPX and the integrated bleeding plug, the EVOSTA 2 family ranks as one of the best products in the category in terms of performance and reliability. The range of EVOSTA 2 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The product is also extremely user-friendly, with a single button for sequential setting and direct access to the motor shaft for unlocking it when necessary. CONSTRUCTION EATURES Cast iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on graphite bushings lubricated by the pumped liquid. Stainless steel rotor liner, stator liner and closing flange. Ceramic thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection. CONTROL PANEL The settings of the EVOSTA 2, EVOSTA 3 circulators can be modified in the control panel on the facia of the pump device. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting. EVOSTA 3 circulator has a display showing the following data: - ead of the selected curve - Instantaneous power consumption in Watts. - Instantaneous head in m - Instantaneous flow rate in m 3 /h

EVOSTA 2 WET ROTOR ELECTRONIC CIRCULATORS MATERIALS N. PARTS MATERIALS 1 1 11 12 1 ROTOR CAN LANGE AISI 316 2 IMPELLER ULTRASON 3 SAT ALUMINA ROTOR e BEARING OUSING BRASS 6 BEARING ALUMINA 7 AXIAL BEARING CARBON AXIAL OUSING EPDM 9 PLUG BRASS 1 O-ring EPDM 11 STATOR OUSING AISI 3 12 ENCLOUSER SELL POLYCARBONATE 13 ENCLOUSER POLYCARBONATE 1 ROTOR SLEEV AISI 3 1 SEAL EPDM 16 PUMP OUSING CAST IRON - BRONZE (SAN VERSION) 17 NECK RING AISI 3 1 CONNECTOR POLYCARBONATE 16 2 17 6 3 7 1 13 9 1 1 1 RO 2 IMP 3 SA RO BEA 6 BEA 7 AXI AXI 9 PLU 1 O-ri 11 STA 12 ENC 13 ENC 1 RO 1 SEA 16 PUM REGULATION MODE PROPORTIONAL PRESSURE REGULATION MODE CONSTANT PRESSURE REGULATION MODE CONSTANT PRESSURE REGULATION MODE PP1 PP2 PP3 CP1 CP2 CP3 I II III Model Number (example) EVOSTA /7 13 ½ X Threaded connections electronic circulator Maximum head range (dm) Centre distance (mm) ½ = 1 ½ Threaded connections = 1 Threaded connections Standard (no ref.) = 1 ½ threaded connections ½ = 1 threaded connections X = 2 threaded connections

EVOSTA 2 - ELECTRONIC CIRCULATORS OR DOMESTIC EATING AND COOLING SYSTEMS - SINGLE, WIT UNIONS Pumped liquid temperature range: from -1 C to +11 C - Maximum operating pressure: 1 bar (1 kpa) (kpa) 7 6 (m) 7 6 2 6 1 12 1 16 1 Q US gpm 2 6 1 12 1 16 Q IMP gpm ft 2 2 L 16 L2 3 2 1 3 2 1 12, 1 1, 2 2, 3 3,, Q m³h.2..6. 1. 1.2 Q l/sec 1 2 3 6 7 Q l/min P (W) 3 3 2 2 1 1 2 6 1 12 1 16 1 Q US gpm 2 6 1 12 1 16 Q IMP gpm, 1 1, 2 2, 3 3,, Q m³h.2..6. 1. 1.2 Q l/sec 1 2 3 6 7 Q l/min B1 B2 B The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. Q=m 3 h,,3,6,9 1, 2, 3, 3,6 Q=l/min 1 1 3 6 EVOSTA 2-7/13 1 6,9 6,9,,1 3, 2, 1,6, EVOSTA 2-7/13 1/2 6,9 6,9,,1 3, 2, 1,6, (m) EVOSTA 2-7/1 1 6,9 6,9,,1 3, 2, 1,6, EVOSTA 2-7/1X 1 1/ 6,9 6,9,,1 3, 2, 1,6, CENTRE DISTANCE mm PUMP CONNECTIONS POWER INPUT z P1 MAX W In A EEI * MINIMUM SUCTION PRESSURE t 9 EVOSTA 2-7/13 1 13 DN2 TREADED ( G 1 ½) 1x23 V ~ 3,3 -,32,1 m.c.a. 1 EVOSTA 2-7/13 1/2 13 DN1 TREADED ( G 1 ) 1x23 V ~ 3,3 -,32,1 m.c.a. 1 EVOSTA 2-7/1 1 1 DN2 TREADED ( G 1 ½) 1x23 V ~ 3,3 -,32,1 m.c.a. 1 EVOSTA 2-7/1X 1 1/ 1 DN32 TREADED ( G 2 ) 1x23 V ~ 3,3 -,32,1 m.c.a. 1 The parameter of reference for the more efficient circulators is EEI,1 L L1 L2 B B1 B2 PACKING DIMENSIONS L B VOLUME m 3 WEIGT kg EVOSTA 2-7/13 1 13 96 6 13.6 3. 99.1 91 1 ½ 12 99 1,21 2,2 EVOSTA 2-7/13 1/2 13 96 6 13.6 3. 99.1 91 1 12 99 1,21 1,6 EVOSTA 2-7/1 1 1 96 9 13.6 3. 99.1 91 1 ½ 192 99 1,2 2,19 EVOSTA 2-7/1X 1 1/ 1 96 9 13.6 3. 99.1 91 2 192 99 1,2 2,3

TECNICAL DATA EVOSTA 2 SAN WET ROTOR ELECTRONIC CIRCULATORS Operating range:,-3,3 m 3 /h with head up to 6,9 metres. Pumped liquid temperature range: from -1 C to +11 C Working pressure: 1 bar (1 kpa) Protection class: IPX Insulation class: Installation: with horizontal motor axis. Standard power input:: single-phase 1x23 V~ /6 z Pumped liquid Clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 3%). in line with European Directive ErP 29/12/EC (formerly EuP) of 21 APPLICATIONS Low energy consumption electronic pump for domestic hot water circulation. ADVANTAGES The new range of EVOSTA 2 SAN circulators by DAB combines the strength of a mechanical circulator with the benefits of an electronic circulator. Thanks to the permanent magnet synchronous motor, the frequency converter and the energy efficiency of EEI.1, as well as the protection class IPX and the integrated bleeding plug. EVOSTA 2 SAN family ranks as one of the best products in the category in terms of performance and reliability. The range of EVOSTA 2 SAN circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The product is also extremely user-friendly, with a single button for sequential setting and direct access to the motor shaft for unlocking it when necessary. CONSTRUCTION EATURES Bronze pump body and wet rotor motor. Steel motor casing, technopolymer impeller. Graphite motor shaft on ceramic bushings lubricated by the pumped liquid. Stainless steel rotor liner and closing flange. Graphite thrust ring. EPDM seal ring and brass air bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection. CONTROL PANEL The settings of EVOSTA 2 SAN circulators can be modified in the control panel on the facia of the pump. The pump has nine settings that can be selected scrolling the MODE button. Six illuminated segments on the display indicate the settings of the pump.

EVOSTA 2 SAN WET ROTOR ELECTRONIC CIRCULATORS MATERIALS N PARTS MATERIALS 1 1 11 12 1 ROTOR CAN LANGE AISI 316 2 IMPELLER ULTRASON 3 SAT ALUMINA ROTOR e BEARING OUSING BRASS 6 BEARING ALUMINA 7 AXIAL BEARING CARBON AXIAL OUSING EPDM 9 PLUG BRASS 1 O-ring EPDM 11 STATOR OUSING AISI 3 12 ENCLOUSER SELL POLYCARBONATE 13 ENCLOUSER POLYCARBONATE 1 ROTOR SLEEV AISI 3 1 SEAL EPDM 16 PUMP OUSING CAST IRON - BRONZE ( SAN VERSION) 17 NECK RING AISI 3 1 CONNECTOR POLYCARBONATE 16 2 17 6 3 7 1 13 9 1 1 1 RO 2 IMP 3 SA RO BEA 6 BEA 7 AXI AXI 9 PLU 1 O-ri 11 STA 12 ENC 13 ENC 1 RO 1 SEA 16 PUM REGULATION MODES PROPORTIONAL PRESSURE REGULATION MODE CONSTANT PRESSURE REGULATION MODE IXED CURVE REGULATION MODE PP1 PP2 PP3 CP1 CP2 CP3 I II III Model Number: (example) EVOSTA 2 SAN /7 1 Threaded connection electronic circulator Maximum head range (dm) Centre distance (mm)

EVOSTA 2 SAN - ELECTRONIC CIRCULATORS OR DOMESTIC EATING SYSTEMS - SINGLE, WIT UNIONS Pumped liquid temperature range: from -1 C to +11 C - Maximum operating pressure: 1 bar (1 kpa) L (kpa) 7 6 (m) 7 6 2 6 1 12 1 16 1 Q US gpm 2 6 1 12 1 16 Q IMP gpm ft 2 2 16 3 2 1 3 2 1 12, 1 1, 2 2, 3 3,, Q m³h.2..6. 1. 1.2 Q l/sec 1 2 3 6 7 Q l/min P (W) 3 3 2 2 1 1 2 6 1 12 1 16 1 Q US gpm 2 6 1 12 1 16 Q IMP gpm, 1 1, 2 2, 3 3,, Q m³h.2..6. 1. 1.2 Q l/sec 1 2 3 6 7 Q l/min B1 B2 B The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. EVOSTA 2 SAN -7/1 Q=m 3 h,,3,6,9 1, 2, 3, 3,6 Q=l/min 1 1 3 6 (m) 6,9 6,9,,1 3, 2, 1,6, CENTRE DISTANCE mm PUMP CONNECTIONS POWER INPUT z P1 MAX W In A EEI * MINIMUM SUCTION PRESSURE t 9 EVOSTA 2 SAN -7/1 1 DN2 TREADED ( G 1 ½) 1x23 V ~ 3,3 -,32,1 m.c.a. 1 *The parameter of reference for the more efficient circulators is EEI,1 L L1 B B1 B2 PACKING DIMENSIONS L B VOLUME m 3 WEIGT kg EVOSTA 2 SAN -7/1 1 96 13.6 3. 99.1 91 1 ½ 192 99 1,2 2,16

TECNICAL DATA EVOSTA 3 WET ROTOR ELECTRONIC CIRCULATORS Operating range:,-3,3 m 3 /h with head up to 6,9 metres. Pumped liquid temperature range: from -1 C to +11 C Working pressure: 1 bar (1 kpa) Protection class: IPX Insulation class: Installation: with horizontal motor axis. Standard power input:: single-phase 1x23 V~ /6 z Pumped liquid Clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 3%). in line with European Directive ErP 29/12/EC (formerly EuP) of 21 APPLICATIONS Low energy consumption electronic pump for water circulation in all types of domestic heating and cooling systems. ADVANTAGES The new range of EVOSTA 3 circulators by DAB combines the strength of an mechanical circulator with the benefits of the electronic circulator. Thanks to the permanent magnet synchronous motor, the frequency converter and the energy efficiency of EEI.19, as well as the protection class IPX and the integrated bleeding plug, the EVOSTA 3 family ranks as one of the best products in the category in terms of performance and reliability. The range of EVOSTA 3 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The product is also extremely user-friendly, with a single button for sequential setting and direct access to the motor shaft for unlocking it when necessary. EVOSTA 3 version has a display t showing the instantaneous flow rate, the instantaneous head and the instantaneous power consumption in Watts. EVOSTA 3 version also offers the new function of automatic degassing. CONSTRUCTION EATURES Cast iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on graphite bushings lubricated by the pumped liquid. Stainless steel rotor liner, stator liner and closing flange. Ceramic thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection. CONTROL PANEL The settings of the EVOSTA 2, EVOSTA 3 circulators can be modified in the control panel on the facia of the pump device. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting. EVOSTA 3 circulator has a display showing the following data: - ead of the selected curve - Instantaneous power consumption in Watts. - Instantaneous head in m - Instantaneous flow rate in m 3 /h

EVOSTA 3 WET ROTOR ELECTRONIC CIRCULATORS MATERIALS N PARTS MATERIALS 1 ROTOR CAN LANGE AISI 316 1 1 11 12 2 IMPELLER ULTRASON 16 3 SAT ALUMINA ROTOR e BEARING OUSING BRASS 19 2 13 6 BEARING ALUMINA 7 AXIAL BEARING CARBON 17 9 AXIAL OUSING EPDM 9 PLUG BRASS 1 1 O-ring EPDM 6 1 11 STATOR OUSING AISI 3 12 ENCLOUSER SELL POLYCARBONATE 13 ENCLOUSER POLYCARBONATE 1 ROTOR SLEEV AISI 3 1 SEAL EPDM 16 PUMP OUSING CAST IRON 17 NECK RING AISI 3 1 CONNECTOR POLYCARBONATE 3 7 1 1 ROTO 2 IMPEL 3 SAT ROTO BEAR 6 BEAR 7 AXIAL AXIAL 9 PLUG 1 O-ring 11 STATO 12 ENCLO 13 ENCLO 1 ROTO 1 SEAL 16 PUMP 19 INSULATION SELL PPE REGULATION MODES PROPORTIONAL PRESSURE REGULATION MODE CONSTANT PRESSURE REGULATION MODE IXED CURVE REGULATION MODE PP1 PP2 PP3 CP1 CP2 CP3 I II III Model Number (example) EVOSTA /7 13 ½ X Threaded connections electronic circulator Maximum head range (dm) Centre distance (mm) ½ = 1 ½ Threaded connections = 1 Threaded connections Standard (no ref.) = 1 ½ threaded connections ½ = 1 threaded connections X = 2 threaded connections

EVOSTA 3 - ELECTRONIC CIRCULATORS OR DOMESTICEATING AND COOLING SYSTEMS - SINGLE, WIT UNIONS Pumped liquid temperature range: from -1 C to +11 C - Maximum operating pressure: 1 bar (1 kpa) 2 6 1 12 1 16 Q US gpm 2 6 1 12 1 Q IMP gpm ft 6 6 2 7 16 6 (kpa) (m) (kpa) L L1 3 2 1 3 2 1 12 3 2 1, 1, 1, 2, 2, 3, 3,, Q m³h.2..6. 1. Q l/sec 1 2 3 6 Q l/min 2 6 1 12 1 16 Q US gpm 2 6 1 12 1 Q IMP gpm 2 P (W) 1 1, 1, 1, 2, 2, 3, 3,, Q m³h.2..6. 1. Q l/sec 1 2 3 6 Q l/min B1 B2 B The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. Q=m 3 h 6 1 1 2 3 3 Q=l/min,,6,9 1,2 1, 2,1 2,9 EVOSTA 3 /13 1,, 3, 2,9 2, 1,7 1,3, EVOSTA 3 /13 1/2,, 3, 2,9 2, 1,7 1,3, (m) EVOSTA 3 /1 1,, 3, 2,9 2, 1,7 1,3, EVOSTA 3 /1 X 1 1/,, 3, 2,9 2, 1,7 1,3, CENTRE DISTANCE mm PUMP CONNECTIONS POWER INPUT z P1 MAX W In A EEI * MINIMUM SUCTION PRESSURE t 9 EVOSTA 3 /13 1 13 DN2 TREADED ( G 1 ½) 1x23 V ~ 2,3 -,1,17 m.c.a. 1 EVOSTA 3 /13 1/2 13 DN1 TREADED ( G 1 ) 1x23 V ~ 2,3 -,1,17 m.c.a. 1 EVOSTA 3 /1 1 1 DN2 TREADED ( G 1 ½) 1x23 V ~ 2,3 -,1,17 m.c.a. 1 EVOSTA 3 /1 X 1 1/ 1 DN3 TREADED ( G 2 ) 1x23 V ~ 2,3 -,1,17 m.c.a. 1 *The parameter of reference for the more efficient circulators is EEI,19 L L1 B B1 B2 PACKING DIMENSIONS L B VOLUME m 3 WEIGT kg EVOSTA 3 /13 1 13 17. 1.1 99.1 11 1 ½ 192 113, 1,3 2, EVOSTA 3 /13 1/2 13 17. 1.1 99.1 11 1 192 113, 1,3 1,9 EVOSTA 3 /1 1 1 17. 1.1 99.1 11 1 ½ 192 113, 1,3 2,22 EVOSTA 3 /1 X 1 1/ 1 17. 1.1 99.1 11 2 192 113, 1,3 2,3

EVOSTA 3 - ELECTRONIC CIRCULATORS OR DOMESTIC EATING AND COOLING SYSTEMS - SINGLE, WIT UNIONS Pumped liquid temperature range: from -1 C to +11 C - Maximum operating pressure: 1 bar (1 kpa) (kpa) (m) 2 6 1 12 1 16 Q US gpm 2 6 1 12 1 Q IMP gpm ft 6 6 2 16 L 3 3 12 2 2 L1 1 1, 1, 1, 2, 2, 3, 3,, Q m³h.2..6. 1. Q l/sec 1 2 3 6 Q l/min 2 6 1 12 1 16 Q US gpm 2 6 1 12 1 Q IMP gpm P (W) 3 3 2 2 1 1, 1, 1, 2, 2, 3, 3,, Q m³h.2..6. 1. Q l/sec 1 2 3 6 Q l/min B1 B2 B The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. Q=m 3 h,6 1,2 1, 2,1 2, 3, 3,6 Q=l/min 9 2 2 3 6 EVOSTA 3 6/13 1 6, 6,, 3, 2, 2,3 1,,7 EVOSTA 3 6/13 1/2 6, 6,, 3, 2, 2,3 1,,7 (m) EVOSTA 3 6/1 1 6, 6,, 3, 2, 2,3 1,,7 EVOSTA 3 6/1X 1 1/ 6, 6,, 3, 2, 2,3 1,,7 CENTRE DISTANCE mm PUMP CONNECTIONS POWER INPUT z P1 MAX W In A EEI * MINIMUM SUCTION PRESSURE t 9 EVOSTA 3 6/13 1 13 DN2 TREADED ( G 1 ½) 1x23 V ~ 3,2 -,33,1 m.c.a. 1 EVOSTA 3 6/13 1/2 13 DN1 TREADED ( G 1 ) 1x23 V ~ 3,2 -,33,1 m.c.a. 1 EVOSTA 3 6/1 1 1 DN2 TREADED ( G 1 ½) 1x23 V ~ 3,2 -,33,1 m.c.a. 1 EVOSTA 3 6/1X 1 1/ 1 DN3 TREADED ( G 2 ) 1x23 V ~ 3,2 -,33,1 m.c.a. 1 *The parameter of reference for the more efficient circulators is EEI,19 L L1 B B1 B2 PACKING DIMENSIONS L B VOLUME m 3 WEIGT kg EVOSTA 3 6/13 1 13 17. 1.1 99.1 11 1 ½ 192 113, 1,3 2, EVOSTA 3 6/13 1/2 13 17. 1.1 99.1 11 1 192 113, 1,3 1,9 EVOSTA 3 6/1 1 1 17. 1.1 99.1 11 1 ½ 192 113, 1,3 2,22 EVOSTA 3 6/1X 1 1/ 1 17. 1.1 99.1 11 2 192 113, 1,3 2,3

EVOSTA 3 - ELECTRONIC CIRCULATORS OR DOMESTIC EATING AND COOLING SYSTEMS - SINGLE, WIT UNIONS Pumped liquid temperature range: from -1 C to +11 C - Maximum operating pressure: 1 bar (1 kpa) L (kpa) 7 6 (m) 7 6 2 6 1 12 1 16 1 Q US gpm 2 6 1 12 1 16 Q IMP gpm ft 2 2 16 3 2 3 2 12 L1 1 1, 1 1, 2 2, 3 3,, Q m³h.2..6. 1. 1.2 Q l/sec 1 2 3 6 7 Q l/min 2 6 1 12 1 16 Q IMP gpm 6 2 6 1 12 1 16 1 Q US gpm P (W) 3 2 1, 1 1, 2 2, 3 3,, Q m³h.2..6. 1. 1.2 Q l/sec 1 2 3 6 7 Q l/min B1 B2 B The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. Q=m 3 h,6,9 1,2 2,7 3,3 3,9,2 Q=l/min 1 1 2 6 7 EVOSTA 3 /13 1,, 7,2 6, 3,7 2,6 1,6 1, EVOSTA 3 /13 1/2,, 7,2 6, 3,7 2,6 1,6 1, (m) EVOSTA 3 /1 1,, 7,2 6, 3,7 2,6 1,6 1, EVOSTA 3 /1X 1 1/,, 7,2 6, 3,7 2,6 1,6 1, CENTRE DISTANCE mm PUMP CONNECTIONS POWER INPUT z P1 MAX W In A EEI * MINIMUM SUCTION PRESSURE t 9 EVOSTA 3 /13 1 13 DN2 TREADED ( G - 1 ½) 1x23 V ~,3 -,7,19 m.c.a. 1 EVOSTA 3 /13 1/2 13 DN1 TREADED ( G - 1 ) 1x23 V ~,3 -,7,19 m.c.a. 1 EVOSTA 3 /1 1 1 DN2 TREADED ( G - 1 ½) 1x23 V ~,3 -,7,19 m.c.a. 1 EVOSTA 3 /1X 1 1/ 1 DN3 TREADED ( G - 2 ) 1x23 V ~,3 -,7,19 m.c.a. 1 *The parameter of reference for the more efficient circulators is EEI,19 L L1 B B1 B2 PACKING DIMENSIONS L B VOLUME m 3 WEIGT kg EVOSTA 3 /13 1 13 17. 1.1 99.1 11 1 ½ 192 113, 1,3 2, EVOSTA 3 /13 1/2 13 17. 1.1 99.1 11 1 192 113, 1,3 1,9 EVOSTA 3 /1 1 1 17. 1.1 99.1 11 1 ½ 192 113, 1,3 2,22 EVOSTA 3 /1X 1 1/ 1 17. 1.1 99.1 11 2 192 113, 1,3 2,3

EVOSTA 2 SAN WET ROTOR ELECTRONIC CIRCULATORS TECNICAL DATA Operating range: -,6 m 3 /h with head up to 1,1 metri Pumped liquid temperature range: : from +2 C to +7 C Working pressure: 1 bar (1 kpa) Protection class: IP2 Insulation class: II Installation: with horizontal motor axis. Standard power input: single-phase 1x11-23 V~ /6 z Pumped liquid: Clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 3%). in line with European Directive ErP 29/12/EC (formerly EuP) of 21 APPLICATIONS Low energy consumption electronic pump for domestic hot water circulation. CONSTRUCTION EATURES Self-protected synchronous motor with spherical rotor requiring just one seal ring between the motor and the pump body. Easy to clean or replace. Brass pump body with R ½ (G ½ ) internal thread in the R version, or with check valve and isolation valve supplied as standard in version V for connector with ½ external thread (G 1 ) Model Number: (example) EVOSTA 2 11/139 V R Threaded ports electronic circulator Maximum head range (dm) External thread: ½ G 1" Internal thread: R ½ (G ½ )

EVOSTA 2 SAN - ELECTRONIC CIRCULATORS OR DOMESTIC EATING AND COOLING SYSTEMS - SINGLE, WIT UNIONS Pumped liquid temperature range: from +2 C to +7 C - Maximum operating pressure: 1 bar (1 kpa) 2 1,2 1,, The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. L L1 (m),6 with valves without valves,,2, 1 2 3 6 Q l/h B Q=m 3 h,1,2,3,,,6 Q=l/h 1 2 3 6 EVOSTA 2 11/139 V 1,1,93,76,9,,23,7 (m) EVOSTA 2 11/ R 1,1 1,7,73,,,23 CENTRE DISTANCE mm PUMP CONNECTIONS POWER INPUT z P1 MAX W In A EEI * MINIMUM SUCTION PRESSURE t 9 EVOSTA 2 11/139 V 139 external thread G 1" 1x11-23 V~ /6 z 7,7A,1 m.c.a. 1 EVOSTA 2 11/ R internal thread G 1/2" 1x11-23 V~ /6 z 7,7A,1 m.c.a. 1 L L1 B 2 CABLE LENGT PACKING DIMENSIONS L B VOLUME m 3 EVOSTA 2 11/139 V 139-1 6 72 1,m 17 12 1,23 EVOSTA 2 11/ R - 1 6 72 1,m 17 12 1,23

Via Marco Polo, 1-33 Mestrino (PD) Italy - Tel. +39.9.12 - ax +39.9.129 www.dabpumps.com On-line product selection DAB PUMPS LTD. Unit and, Stortford all Industrial Park, Dunmow Road, Bishops Stortford, erts CM23 GZ - UK salesuk@dwtgroup.com Tel. + 1279 62 776 ax + 1279 67 727 DAB PUMPS B.V. Brusselstraat 1 B-172 Groot-Bijgaarden - Belgium info.belgium@dwtgroup.com Tel. +32 2 6633 ax +32 2 66921 DAB PUMPS B.V. Albert Einsteinweg, 11 DL Drunen - Nederland info.netherlands@dwtgroup.com Tel. +31 16 372 ax +31 16 37299 DAB PUMPS IBERICA S.L. Calle Verano 1-2-22 2 - Torrejón de Ardoz - Madrid Spain Info.spain@dwtgroup.com Tel. +3 91 669 ax: + 3 91 669676 DAB PUMPS UNGARY KT. - Nagykanizsa, Buda Ernő u. ungary Tel. +36 9317 DAB PUMPS POLAND Sp. z o.o. Mokotów Marynarska ul. Postępu 1C 2-676 Warszawa - Poland polska@dabpumps.com.pl Tel. + 223 16 OOO DAB PUMPS Novgorodskaya str. 1, block G office 3, 12727, Moscow - Russia info.russia@dwtgroup.com Tel. +7 9 122 3 ax +7 9 122 36 DAB PUMPS SOUT ARICA PTY Twenty One industrial Estate, 16 Purlin Street, Warehouse, Unit B Olifantsfontein - South - Africa info.sa@dwtgroup.com Tel. +27 12 361 3997 ax +27 12 361 3137 DAB PUMPS (QINGDAO) CO. LTD. No. Kaituo Road, Qingdao Economic & Technological Development Zone Qingdao City, Shandong Province - China PC: 266 sales.cn@dwtgroup.com Tel. +6 16 2 ax +6 3261221 DAB PUMPS DE MÉXICO, S.A. DE C.V. Av Amsterdam 11 Local Col. ipódromo Condesa, Del. Cuauhtémoc CP 617 Ciudad de México Tel. +2 6719 93 DAB PUMPEN DEUTSCLAND Gmb Tackweg 11 D - 791 Tönisvorst - Germany info.germany@dwtgroup.com Tel. +9 211 2136- ax +9 211 2136-36 DAB PUMPS INC. 3226 Benchmark Drive Ladson, SC 296 - USA info.usa@dwtgroup.com Tel. 1-3-797-2 ax 1-3-797-3366 DAB PUMPS OCEANIA PTY LTD 26 South Gippsland wy, Dandenong South VIC 317 Australia info.oceania@dwtgroup.com Tel. +61 13 373 677 617311-3/21