Conservation of Energy Concept Questions

Similar documents
MASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Physics Physics IC_W05D1 ConcepTests

Angular Momentum System of Particles Concept Questions

Conservation of Energy Challenge Problems Problem 1

Simple Harmonic Oscillator Challenge Problems

8.01x Classical Mechanics, Fall 2016 Massachusetts Institute of Technology. Problem Set 8

Module 14: Application of the Principle of Conservation of Energy

AP Physics C. Work and Energy. Free-Response Problems. (Without Calculus)

Choose the best answer for Questions 1-15 below. Mark your answer on your scantron form using a #2 pencil.

Potential Energy & Conservation of Energy

Physics 103, Practice Midterm Exam 2

14.9 Worked Examples. Example 14.2 Escape Velocity of Toro

NAME. (2) Choose the graph below that represents the velocity vs. time for constant, nonzero acceleration in one dimension.

Practice Problems for Exam 2 Solutions

PSI AP Physics I Work and Energy

Webreview Torque and Rotation Practice Test

Chapter 6 Energy and Oscillations

Topic 2 Revision questions Paper

Circular Motion Dynamics Concept Questions

Problem Solving Circular Motion Dynamics Challenge Problems

CPS lesson Work and Energy ANSWER KEY

1 of 6 10/21/2009 6:33 PM

PHYS 101 Previous Exam Problems. Kinetic Energy and

Practice Exam 2. Name: Date: ID: A. Multiple Choice Identify the choice that best completes the statement or answers the question.

AP Physics C Summer Assignment Kinematics

Old Exams Questions Ch. 8 T072 Q2.: Q5. Q7.

AP Physics C. Momentum. Free Response Problems

Conservation of Mechanical Energy 8.01

IB Questionbank Physics NAME. IB Physics 2 HL Summer Packet

Healy/DiMurro. Vibrations 2016

Physics Test Review: Mechanics Session: Name:

5. A car moves with a constant speed in a clockwise direction around a circular path of radius r, as represented in the diagram above.

1. A sphere with a radius of 1.7 cm has a volume of: A) m 3 B) m 3 C) m 3 D) 0.11 m 3 E) 21 m 3

(a) On the dots below that represent the students, draw and label free-body diagrams showing the forces on Student A and on Student B.

( ) ( ) A i ˆj. What is the unit vector  that points in the direction of A? 1) The vector A is given by = ( 6.0m ) ˆ ( 8.0m ) Solution A D) 6 E) 6

AP Physics C: Mechanics Practice (Systems of Particles and Linear Momentum)

(A) 10 m (B) 20 m (C) 25 m (D) 30 m (E) 40 m

Name Lesson 7. Homework Work and Energy Problem Solving Outcomes

Physics 8 Monday, October 12, 2015

Exam 2: Equation Summary

Old Exam. Question Chapter 7 072

2 possibilities. 2.) Work is done and... 1.) Work is done and... *** The function of work is to change energy ***

Phys101 Second Major-152 Zero Version Coordinator: Dr. W. Basheer Monday, March 07, 2016 Page: 1

Page 1. Name:

s_3x03 Page 1 Physics Samples

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

Created by T. Madas WORK & ENERGY. Created by T. Madas

Physics 8 Monday, October 9, 2017

Physics 201, Midterm Exam 2, Fall Answer Key

6. Find the net torque on the wheel in Figure about the axle through O if a = 10.0 cm and b = 25.0 cm.

Phys101 Second Major-162 Zero Version Coordinator: Dr. Kunwar S. Saturday, March 25, 2017 Page: 1

frictionless horizontal surface. The bullet penetrates the block and emerges with a velocity of o

1. In part (a) of the figure, an air track cart attached to a spring rests on the track at the position x equilibrium and the spring is relaxed.

Physics 23 Exam 2 March 3, 2009

Use the following to answer question 1:

Suggested Problems. Chapter 1

AP Physics. Chapters 7 & 8 Review

The graph shows how an external force applied to an object of mass 2.0 kg varies with time. The object is initially at rest.

Work and Energy Chapter Questions. 2. Contrast the effects of external forces and internal forces on the total energy of a system.

Energy Conservation AP

Regents Physics. Physics Midterm Review - Multiple Choice Problems

C) D) 2. The diagram below shows a worker using a rope to pull a cart.

Summer Physics 41 Pretest. Shorty Shorts (2 pts ea): Circle the best answer. Show work if a calculation is required.

Circular Motion Concept Questions

AP Physics C: Work, Energy, and Power Practice

Slide 1 / 76. Work & Energy Multiple Choice Problems

Written Homework problems. Spring (taken from Giancoli, 4 th edition)

PHYS 1303 Final Exam Example Questions

PHYSICS 221, FALL 2010 EXAM #1 Solutions WEDNESDAY, SEPTEMBER 29, 2010

CHAPTER 6 WORK AND ENERGY

PHYSICS 221, FALL 2009 EXAM #1 SOLUTIONS WEDNESDAY, SEPTEMBER 30, 2009

(A) I only (B) III only (C) I and II only (D) II and III only (E) I, II, and III

End-of-Chapter Exercises

Momentum, Impulse, Work, Energy, Power, and Conservation Laws

Momentum, Impulse, Work, Energy, Power, and Conservation Laws

AP Physics B Summer Assignment

Potential Energy, Conservation of Energy, and Energy Diagrams. Announcements. Review: Conservative Forces. (path independent) 8.

8.012 Physics I: Classical Mechanics Fall 2008

Physics 8 Wednesday, October 11, 2017

PHY218 SPRING 2016 Review for Final Exam: Week 14 Final Review: Chapters 1-11, 13-14

Lecture 10. Example: Friction and Motion

(35+70) 35 g (m 1+m 2)a=m1g a = 35 a= =3.27 g 105

FINAL EXAM CLOSED BOOK

Exam 3--PHYS 101--F15

Physics 2211 ABC Quiz #3 Solutions Spring 2017

(1) (3)

is acting on a body of mass m = 3.0 kg and changes its velocity from an initial

16.07 Dynamics Final Exam

Physics Exam 2 October 11, 2007

3. How long must a 100 N net force act to produce a change in momentum of 200 kg m/s? (A) 0.25 s (B) 0.50 s (C) 1.0 s (D) 2.0 s (E) 4.

AP Physics 1: MIDTERM REVIEW OVER UNITS 2-4: KINEMATICS, DYNAMICS, FORCE & MOTION, WORK & POWER

St. Joseph s Anglo-Chinese School

1. The diagram below shows the variation with time t of the velocity v of an object.

UNIVERSITY OF SASKATCHEWAN Department of Physics and Engineering Physics

Potential energy functions used in Chapter 7

St. Mary's H.S. Physics. Midterm Review

Module 17: Systems, Conservation of Momentum and Center of Mass

Honor Physics Final Exam Review. What is the difference between series, parallel, and combination circuits?

LAHS Physics Semester 1 Final Practice Multiple Choice

2. What would happen to his acceleration if his speed were half? Energy The ability to do work

Phys101 Second Major-162 Zero Version Coordinator: Dr. Kunwar S. Saturday, March 25, 2017 Page: N Ans:

Transcription:

Conservation of Energy Concept Questions Question 1: A block of inertia m is attached to a relaxed spring on an inclined plane. The block is allowed to slide down the incline, and comes to rest. The coefficient of kinetic friction of the block on the incline is µ k. For which definition of the system is the change in total energy (after the block is released) zero? 1. block 2. block + spring 3. block + spring + incline 4. block + spring + incline + Earth Answer: 4. Since there is dissipative forces acting between the block and the incline plane some gravitational potential energy is dissipated into the block and incline plane increasing the thermal energy of those objects.

Question 2: (Note the slight notation change, using h max instead of h m.) A spring-loaded toy dart gun is used to shoot a dart straight up in the air, and the dart reaches a maximum height h max. The same dart is shot straight up a second time from the same gun, but this time the spring is compressed only half as far before firing. How far up does the dart go this time, neglecting friction and assuming an ideal spring? a) h max b) h / 2 max c) h / 4 max d) 2h max e) 4h max f) The dart escapes to infinity. Question 2 Solution: Answer c) is correct. This problem is most simply solved using energy considerations. Specifically, if the spring is compressed only half as much, the potential energy stored in the spring, which is the energy delivered to the dart, is one-fourth as much. In the absence of friction, all of this energy becomes potential energy when the dart is at its maximum height. Note that the intermediate calculation of the dart s speed when leaving the gun did not need to be calculated.

Question 3 An object of mass m slides down a plane that is inclined at an angle θ from the horizontal. The object starts out at rest. The center of mass of the cart is an unknown distance d from an unstretched spring with spring constant k that lies at the bottom of the plane. Assume the inclined plane to be frictionless. The spring compress a distance x when the mass first comes to rest? Find an expression for the distance d. 1 1. d = k x 2 " x 2mg sin! 1 2. d = k x 2 2mg sin! 1 3. d = k x 2 " xsin! 2mg 1 2 4. d = k x 2mg 1 2 5. d = k x + x 2mg sin! 1 2 6. d = k x + xsin! 2mg Solution 2: Let x denote the displacement of the spring from the equilibrium position. Choose the zero point for the gravitational potential energy U grav (x = 0)= 0 not at the very bottom of the inclined plane, but at the location of the end of the unstretched spring. Choose the zero point for the spring potential energy when the spring is at its equilibrium position, U (x = 0)= 0. spring Choose for the initial state the instant the object is released. The initial kinetic energy is K 0 = 0. The initial potential energy is non-zero, U 0 = mg d sin!. The initial mechanical energy is then

E = K +U = mg d sin! (3.1) 0 0 0 Choose for the final state the instant when the object first comes to rest and the spring is compressed a distance x at the bottom of the inclined plane. The final kinetic energy is K f = 0 since the mass is not in motion. The final potential energy is non-zero, U f = 1 k x 2! x mg sin". Notice that the gravitational potential energy is negative 2 because the object has dropped below the height of the zero point of gravitational potential energy. The final mechanical energy is then E f = K f + U f = 1 k x 2! x mg sin". (3.2) 2 Since we are assuming the track is frictionless, there is no non- conservative work. The change in mechanical energy is therefore zero, Thus mechanical energy is conserved, E f = E 0, or 0 = W = E f " E 0. (3.3) nc =!E mechanical Thus d mg sin! = 1 k x 2 " x mg sin!. (3.4) 2 1 2 d = 2mg sin! k x " x. (3.5)

Question 4 Marble Run A marble starts from rest and slides down hill. Which path leads to the highest speed at the finish? 1) 1 2) 2 3) 3 4) all result in the same final speed Answer 4. We are assuming that there is no friction on the paths so the mechanical energy is constant. The change in potential energy is the same for all three paths therefore the change in kinetic energy is also the same for all three paths.

Question 5 Marble Run Shortest Time A marble starts from rest and slides down hill. Which path results in the shortest time to the finish? 1) 1 2) 2 3) 3 4) all result in the same final speed Answer 3. We are assuming that there is no friction on the paths so the mechanical energy is constant. Because the speed is greatest on path 3, the horizontal component of the velocity is greater on path 3 than at any point on path 2 or path 1, (included the starting and ending segments). Therefore it takes less time on path 3 to traverse the horizontal distance between the starting and ending points of each path.

Question 6 Conservation Laws 1 A tetherball of mass m is attached to a post of radius by a string. Initially it is a distance r 0 from the center of the post and it is moving tangentially with a speed v 0. The string passes through a hole in the center of the post at the top. The string is gradually shortened by drawing it through the hole. Ignore gravity and any dissipative forces. Until the ball hits the post, 1. The kinetic energy of the ball is constant. 2. The kinetic energy of the ball changes. 3. Not enough information is given to determine whether the kinetic energy of the ball changes or not. Answer: 2. Since the path of the ball is not circular, a small displacement of the ball has a radial component inward so the dot product between the force by the rope on the ball with the displacement is non-zero hence the work done by the force is not zero. Therefore the kinetic energy of the ball changes..

Question 7 Conservation Laws 2 A tetherball of mass m is attached to a post of radius R by a string. Initially it is a distance r 0 from the center of the post and it is moving tangentially with a speed v 0. The string wraps around the outside of the post. Ignore gravity and any dissipative forces. Until the ball hits the post, 1. The kinetic energy of the ball is constant. 2. The kinetic energy of the ball changes. 3. Not enough information is given to determine whether the kinetic energy of the ball changes or not. Answer 1. A small displacement of the ball is always perpendicular to string since at each instant in time the ball undergoes an instantaneous circular motion about the string contact point with pole. Therefore the dot product between the force by the rope on the ball with the displacement is zero hence the work done by the force is zero. Therefore the kinetic energy of the ball does not change.

Question 8 Trolley A streetcar is freely coasting (no friction) around a large circular track. It is then switched to a small circular track. When coasting on the smaller circle its linear speed is 1. greater 2. less. 3. unchanged. Answer: 3. Unchanged. Carefully draw a free body diagram for the streetcar while it is on the link of track connecting the two circular tracks. In the vertical direction, the force of gravity at all times balances the vertical component of the normal force of the track on the car, so there is no acceleration in the vertical direction and we may ignore it for the rest of this problem. In the horizontal direction, the train is guided by the horizontal component of the normal force of the track on the wheels. This force is always normal to the direction of motion, so no work is done by this force. Therefore the streetcar's total energy does not change, and its speed remains constant.

MIT OpenCourseWare http://ocw.mit.edu 8.01SC Physics I: Classical Mechanics For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms.