TX14/15 SERIES CONNECTORS

Similar documents
3M HDC Socket.100 Right Angle, PCB, 3 or 4-Row, Solder Tail or Press-Fit HDC Series

D-DF. Right angle version: full gold plating over 2µm. Straight version: full gold plating over 2µm

Product Series Specification Document

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION SEARAY CONNECTOR SYSTEM

DIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD

SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF SCA-2 CONNECTOR SERIES

3M CP2 Press-Fit Header

Blower Motor 3P Connector

Qualification Test Report

Product Data Sheet PD-0053-A

Connector~Tech Providing Harsh Environment Connector

0.3mm Pitch Connector for FPC. FF02S Series

3M MetPak CP2 Press-Fit Header 2 mm Type C, 55 Signal Contacts, Left Guidance CP2 Series

Single Module EN4165 ARINC BACC 65 EN4165. The New Standard Connector for Aircraft equipment and cabin systems. Advantages

EMI Filtered Connectors

3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA. 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA

File E28476 Vol. 7 Sec. 44 Page 1 Issued: Vol. 23 Sec. 18 Revised: Vol. 67 Sec. 4 and Report D E S C R I P T I O N

ATC 200 A Series BX Ceramic Multilayer Capacitors

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION

2mm Hard Metric Connectors

Pin & Socket Connectors

Imformation of C091D series

3M Serial Attached SCSI (SAS) Connector Boardmount Through-Hole, Vertical Receptacle

ZIF Connectors. DLM Product Introduction Cannon has expanded the DL-ZIF Series. Materials and Finishes

PRODUCT SPECIFICATION

Ÿ 9-50-way std density Ÿ way high Density Ÿ Mixed layout constructions ( e.g. 7W2, 9W4, 17W5) Ÿ Power constructions in 20A -40A ( e.g.

3M Pak 10 Plug, PK10 series PK10-XXXPX-X-DA. 3M Pak 10 Socket, PK10 series PK10-XXXSX-X-DA

Spezifikation Z56-xx Series ZIF FFC/FPC Connector 0,5mm Pitch Double Contact H1,96mm Piano

Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors C 091 A/B/D Series

Metal can, sealed time delay relay, with 2PDT output 25,8 x 25,8 x 25,7 mm maxi. Mating socket SRE 410, SME 410 STF 410 see page 9

C Electrical Connector Subsea / Underwater / Marine

3M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse

High Power Contacts - Up to 850A

American Zettler AZ742 RELAY Datasheet

CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, NON-REMOVABLE GAUGE 26 PCB PIN CONTACTS BASED ON TYPE 8MCG

SERIES 10 ELEKTRISCHE STECKVERBINDER FÜR MEERES- UND MARINETECHNIK HIGH PERFORMANCE UNDERWATER ELECTRICAL CONNECTORS

Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH

CLASSix UTP Patch Cords

General-purpose Multi-Contact Circular Waterproof Connectors

5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3

2.3. Rockers. Contents

Base S C T B

Product Data Sheet PD-0037-B

RJ Connector. IP 67 Receptacle I Unmated & Mated Overmolded with Cable I Mated Field Installable I Mated. RJ Connector I Range Overview

PRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..

MOLEX TAIWAN LTD ( GC ) TITLE : SINGLE PORT UP-RIGHT TYPE USB CONNECTOR

Distinctive Characteristics

A B C D E F G H J K L M N P Q

Product Data Sheet PD-0036-B. 3M PC Boardmount Plug and Receptacle, 2 mm 95X Series

Terminal Block Accessories

REGLETA RECTA SIMPLE FILA

Mounting kits for insulation of power transistors

DC~40GHz) Interface Dimensions. Microwave Town mm Connectors

Product Specification

TF Series Miniature Snap-acting Switches

ATC 900 C Series X7R Ceramic RF Power Multilayer Capacitors

ATC 700 B Series NPO Porcelain and Ceramic Multilayer Capacitors

This specification covers the requirements for product performance, test methods and quality assurance provisions of FG Terminal.

WW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201

Slide Switches, Vertical, Single or Dual Actuator

TF Series Miniature Snap-acting Switches

PRODUCT. Part. A1 Micro USB USB3140. Rev. Page. Description Doc USB3140.

PRELIMINARY PRODUCT SPECIFICATION. Part Number Product Description Doc Number

Quad 10GBASE-T to XAUI Converter

MLCC with FLEXITERM. General Specifications GENERAL DESCRIPTION APPLICATIONS PRODUCT ADVANTAGES HOW TO ORDER

Commercial Generator Parts Catalog. PROTEC Series

CS-32 ROTARY SELECTOR SWITCHES (SMD) C S Z E T A FEATURES PART NUMBER DESIGNATION

Distinctive Characteristics

Amphenol Amphenol-Tuchel Electronics GmbH. C 091 A/B/D Series. Circular Connectors.

Table of Contents Pin-Configuration Selection Guide for HDE, HDS, & EFP

Protected. Main specifications. Additional specifications. Product adaptations

Overview. Benefits. Applications

Features. Circuit Schematic. Typical Electrical Characteristics. Applications. Surface Mount EMI Filters Three Terminal Chips

HARTING D-Sub Selection Guide

MLCC with FLEXITERM. General Specifications GENERAL DESCRIPTION APPLICATIONS PRODUCT ADVANTAGES HOW TO ORDER C 104 K A Z 2 A

PTF Series Long Life Slide Potentiometer

Eaton s Arrow Hart Controlled receptacles. Control marked receptacles are the ideal solution for minimizing energy usage.

Scalloped Square Square Model (Width) # of Resistors Circuit Industry Size Convex Convex Concave

Section 12. EC Cores PHYSICAL DIMENSIONS MAGNETIC DATA

High Voltage MLC Chips

WK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603

SULFURATION-RESISTANT CHIP RESISTOR

Surface Mount and Through-Hole Multilayer Ceramic Chip Stacked Capacitors KPS-MCC High Temperature 200 C SMPS, 50 2,000 VDC (Industrial Grade)

Rotary Switches AC09, 16 and 32

How To Order SHELL SIZE MATERIAL AND CONTACT TERMINATION CONTACT ARRANGEMENT ALTERNATE INSERT POLARIZATION

EV Series 1.5 Amp Sensitive SCRs. Description. Features. Surge capability > 15Amps Blocking voltage (V DRM / V RRM.

Amphenol MS/97 SERIES STANDARD CIRCULAR THREAD COUPLED SOLDER AND CRIMP CONNECTORS

ATC 800 C Series NPO Ceramic High RF Power Multilayer Capacitors

Vishay Dale Wirewound Resistors, Military, MIL-PRF Qualified, Type RE, Aluminum Housed, Chassis Mount FEATURES RESISTANCE RANGE 18546

GENERAL PURPOSE CAPACITORS

DATA SHEET. Radial series Leaded ceramic multilayer capacitors. BCE Sud Passive Components Oct 16

Ring encoder with 4mm height contribute to space saving and multifunctioning. Typical Specifications. Rating. Operating life

DATA SHEET: TEMPOWER2 ACB

Excellent Integrated System Limited

MS/Standard how to order

FASTON Terminals (Insulated and Uninsulated)

fischer connectors General Catalogue Edition 5.2

Transcription:

The leaf-type design (non-pin) contact of this board-to-board connector is superior in reliability and stability due to its resistance to twisting. The receptacle (TX1) and plug (TX15) combination can be arranged in horizontal, vertical or parallel connections. Straight through hole and right angle through hole types are available. With 5 variable heights of the straight through hole type, this series is particularly adaptable to parallel board assemblies spaced within a range of 12 to 20mm (.72-.787"). These connectors are ideal for all types of office/factory automation equipment, computers, and other electronic equipment. GENERAL SPEIIATIONS EATURES Greater stability and reliability due to extra long contact wipe Leaf-type contact design resists damage from twisting irst-to-make-last-to-break contact action Nine optional stacking heights: 12 to 20mm (.72 to.787"), 1mm (.039") intervals 16 optional polarization keying positions With/without hook pin onnector Profile (Ref.) Number of 30 to 80, 100, 120, 10, 160, 180, 200 ontact Spacing urrent Rating Dielectric Withstanding Voltage Insulation Resistance ontact Resistance Operating Temperature 1.27mm (.050"), Double row 0.5 Amps 500 VA r.m.s. (for one minute) 100 megohms min. 0 milliohms max. -0 to +80 PB Thickness 1.6mm (0.063") MATERIALS AND INISHES Description ontact Insulator Spacer Materials/inishes opper Alloy onnecting area: Gold 0.1µm (.00000") min. over Nickel Terminal area: Tin plating Glass-filled Nylon (UL9V-0, Black) Glass-filled Nylon (UL9V-0, Black) Phosphor Bronze/Tin plating ORDERING INORMATION TX** ** * * ** * * 1 Series TX1/TX15 30, 0, 50, 60, 70, 80, 100, 120, 10, 160, 180, 200 onnector Type P Plug R Receptacle Mating Height ode (ST) 6 to 10 (LT) None Termination Style ST Straight Through Hole LT Right Angle Through Hole Mounting Ears M With Mounting Ears Blank Without Mounting Ears H With N Without inish ode 1 onnecting Area: Gold 0.1µm (.00000") min. over Nickel Terminal Area: Tin plating Dimensions in mm (inches).

TX1 REEPTALE STRAIGHT THROUGH HOLE (With Mounting Ears) TX1 **R *ST M*1 TX15 PLUG STRAIGHT THROUGH HOLE (With Mounting Ears) TX15 **P *ST M*1 7 (.276 ) 18.6 to 22.6 18.6 to 22.6 (.732 to.890) (.732 to.890) 12 to 20 (.72 to.787 ) STRAIGHT THROUGH HOLE (Without Mounting Ears) TX1 **R *ST N1 7 (.276 ) STRAIGHT THROUGH HOLE (Without Mounting Ears) TX15 **P *ST N*1 7 (.276 ) ANGLE THROUGH HOLE (With Mounting Ears) TX1 **R LT M*1 ANGLE THROUGH HOLE (With Mounting Ears) TX15 **P LT M*1 25.2 (.992) 7 (.276 ) Note : R Receptacle, P Plug Receptacle a Insulator Height (Straight Through Hole) Mating Height ode 6 7 8 9 10 Receptacle a 8.9 (.350) 9.9 (.390) 10.9 (.29) 11.9 (.69) 12.9 (.508) Plug b 9.2 (.362) 10.2 (.02) 11.2 (.1) 12.2 (.80) 13.2 (.520) Plug b Parallel Board-to-Board Distance Plug Receptacle Mating Height ode 6 7 8 9 10 6 12 (.72) 13 (.512) 1 (.551) 15 (.591) 16 (.630) 7 13 (.512) 1 (.551) 15 (.591) 16 (.630) 17 (.669) 8 1 (.551) 15 (.591) 16 (.630) 17 (.669) 18 (.709) 9 15 (.591) 16 (.630) 17 (.669) 18 (.709) 19 (.78) 10 16 (.630) 17 (.669) 18 (.709) 19 (.78) 20 (.787) Dimensions and specifications subject to change without notice.

TX1 REEPTALE STRAIGHT THROUGH HOLE (ST) TYPE WITH MOUNTING EARS (M): 30 TO 120 ONTATS With : TX1-**R- ST-MH1 Without : TX1-**R- ST-MN1 D w 0. x t 0.3 ( w.016 x t.012) (Note 1) 2.6 (.102) 3.1 (.122) 0.5 (.020).9 (.193) + 0 (.000) 0.2 (.008) Note 2: Shown with hook pins. Insulator height. Refer to Mating Height Table. PB Hole Patterns (Ref.) 30, 50, 70 0, 60, 80, 100, 120 Polorization Key Polorization Key (Note 3) (Note 3) A A D D Note 3: Holes on both sides are needed for hook pin type. A D +0.1 +.00-0.3 ( -.012) 30 TX1-30R- ST-M*1 17.78 (.700) 23.78 (.936) 27.9 (1.100) 3.98 (1.377) 0 TX1-0R- ST-M*1 2.13 (.950) 30.13 (1.186) 3.29 (1.350) 1.33 (1.627) 50 TX1-50R- ST-M*1 30.8 (1.200) 36.8 (1.36) 0.6 (1.600) 7.68 (1.877) 60 TX1-60R- ST-M*1 36.83 (1.50) 2.83 (1.686) 6.99 (1.850) 5.03 (2.127) 70 TX1-70R- ST-M*1 3.18 (1.700) 9.18 (1.936) 53.3 (2.100) 60.38 (2.377) 80 TX1-80R- ST-M*1 9.53 (1.950) 55.53 (2.186) 59.69 (2.350) 66.73 (2.627) 100 TX1-100R- ST-M*1 62.23 (2.50) 68.23 (2.686) 72.39 (2.850) 79.3 (3.127) 120 TX1-120R- ST-M*1 7.93 (2.950) 80.93 (3.186) 85.09 (3.350) 92.13 (3.627) Dimensions Dimensions in mm in mm (inches). (inches).

TX1 REEPTALE STRAIGHT THROUGH HOLE (ST) TYPE WITH MOUNTING EARS (M): 10 TO 200 ONTATS With : TX1-**R- ST-MH1 Without : TX1-**R- ST-MN1 D w 0. X t 0.3 (w.016 Xt.012) 6.99 (1.850) (Note1) Porarizing 2.6 (.102) 3.1 (.122) 0.5 (.020).9 (.193) + 0 (.000) 0.2 (.008) B (Note 3) Polorization Key (Note 3) Polorization Key A A A A B B D D A B D +0.1 +.00-0.3 ( -.012) 10 TX1-10R- ST-M*1 3.18 (1.700) 90.17 (3.550) 96.17 (3.786) 100.33 (3.950) 107.37 (.227) 160 TX1-160R- ST-M*1 9.53 (1.950) 102.87 (.050) 108.87 (.286) 113.03 (.50) 120.07 (.727) 180 TX1-180R- ST-M*1 55.88 (2.200) 115.57 (.550) 121.57 (.786) 125.73 (.950) 132.77 (5.227) 200 TX1-200R- ST-M*1 62.23 (2.50) 128.27 (5.050) 13.27 (5.286) 138.3 (5.50) 15.7 (5.727) Dimensions and specifications subject to change without notice.

TX1 REEPTALE STRAIGHT THROUGH HOLE (ST) TYPE WITHOUT MOUNTING EARS (N): 30 TO 120 ONTATS Without : TX1-**R- ST-N1 w 0. x t 0.3 ( w.016 x t.012) 3.1 (.122) (Note 1).9 (.193) + 0 (.000) 0.2 (.008) D Insulator height. Refer to Mating Height Table. PB Hole Patterns (Ref.) 30, 50, 70 0, 60, 80, 100, 120 Polorizing Key Polorizing Key A A A D +0.1 +.00-0.3 -.012 ( ) 30 TX1-30R- ST-N1 17.78 (.700) 23.78 (.936) 26.38 (1.039) 0 TX1-0R- ST-N1 2.13 (.950) 30.13 (1.186) 32.73 (1.289) 50 TX1-50R- ST-N1 30.8 (1.200) 36.8 (1.36) 39.08 (1.539) 60 TX1-60R- ST-N1 36.83 (1.50) 2.83 (1.686) 5.3 (1.789) 70 TX1-70R- ST-N1 3.18 (1.700) 9.18 (1.936) 51.78 (2.039) 80 TX1-80R- ST-N1 9.53 (1.950) 55.53 (2.186) 58.13 (2.289) 100 TX1-100R- ST-N1 62.23 (2.50) 68.23 (2.686) 70.83 (2.789) 120 TX1-120R- ST-N1 7.93 (2.950) 80.93 (3.186) 83.53 (3.289) Dimensions Dimensions in mm in (inches). mm (inches).

TX1 REEPTALE STRAIGHT THROUGH HOLE (ST) TYPE WITHOUT MOUNTING EARS (N): 10 TO 200 ONTATS Without : TX1-**R- ST-N1 w0. X t0.3 (w0.16 X t0.12) 6.99 (1.850) 3.1 (.122) ompany Logo (Note 1).9 (.193) + 0 (.000) 0.2 (.008) B D Note 1 Insulator height. Refer to Mating Height Table. Polorizing Key PB Hole Patterns (Ref.) 10, 180 160, 200 Polorizing Key A A B A A B A B D +0.1 +.00-0.3 (-.012) 10 TX1-10R- ST-N1 3.18 (1.700) 90.17 (3.550) 96.17 (3.786) 98.77 (3.889) 160 TX1-160R- ST-N1 9.53 (1.950) 102.87 (.050) 108.87 (.286) 111.7 (.389) 180 TX1-180R- ST-N1 55.88 (2.200) 115.57 (.550) 121.57 (.786) 12.17 (.889) 200 TX1-200R- ST-N1 62.23 (2.50) 128.27 (5.050) 13.27 (5.286) 136.87 (5.389) Dimensions and specifications subject to change without notice.

TX1 REEPTALE RIGHT ANGLE THROUGH HOLE (LT) TYPE WITH MOUNTING EARS (M): 30 TO 120 ONTATS With : TX1-**R-LT-MH1 Without : TX1-**R-LT-MN1 D 2.5 (.098) 0.5 (.020) 3 (.118) 15.5 (.610) 3.1 (.122) 3.7 (.16).9 (.193) + 0 (.000) 0.2 (.008) w0. X t0.3 (w.016 X t.012) (Note 1) Shown with hook pins. PB Hole Patterns (Ref.) 30, 50, 70 0, 60, 80, 100, 120 A A D D Note 2: Applicable screws for without-hook-pin type: M2 A D +0.1 +.00-0.3 (-.012) 30 TX1-30R-LT-M*1 17.78 (.700) 23.78 (.936) 27.9 (1.100) 3.98 (1.377) 0 TX1-0R-LT-M*1 2.13 (.950) 30.13 (1.186) 3.29 (1.350) 1.33 (1.627) 50 TX1-50R-LT-M*1 30.8 (1.200) 36.8 (1.36) 0.6 (1.600) 7.68 (1.877) 60 TX1-60R-LT-M*1 36.83 (1.50) 2.83 (1.686) 6.99 (1.850) 5.03 (2.127) 70 TX1-70R-LT-M*1 3.18 (1.700) 9.18 (1.936) 53.3 (2.100) 60.38 (2.377) 80 TX1-80R-LT-M*1 9.53 (1.950) 55.53 (2.186) 59.69 (2.350) 66.73 (2.627) 100 TX1-100R-LT-M*1 62.23 (2.50) 68.23 (2.686) 72.39 (2.850) 79.3 (3.127) 120 TX1-120R-LT-M*1 7.93 (2.950) 80.93 (3.186) 85.09 (3.350) 92.13 (3.627) Dimensions Dimensions in mm in (inches). mm (inches).

TX1 REEPTALE RIGHT ANGLE THROUGH HOLE (LT) TYPE WITH MOUNTING EARS (M): 10 TO 200 ONTATS With : TX1-**R-LT-MH1 Without : TX1-**R-LT-MN1 D 15.5 (.610) 3 (.118) 2.5 (.098) 6.99 (1.850) 0.5 (.020) 3.1 (.122) 3.7 (.16).9 (.193) + 0 (.000) 0.2 (.008) w0. X t0.3 (w0.16 X t0.12) (Note1) B Shown with hook pins. PB Hole Patterns (Ref.) 10, 180 160, 200 A A A B B D D Note 2: A Applicable screws for without-hook-pin type: M2 A B D +0.1 +.00-0.3 ( -.012) 10 TX1-10R-LT-M*1 3.18 (1.700) 90.17 (3.550) 96.17 (3.786) 100.33 (3.950) 107.37 (.227) 160 TX1-160R-LT-M*1 9.53 (1.950) 102.87 (.050) 108.87 (.286) 113.03 (.50) 120.07 (.727) 180 TX1-180R-LT-M*1 55.88 (2.200) 115.57 (.550) 121.57 (.786) 125.73 (.950) 132.77 (5.227) 200 TX1-200R-LT-M*1 62.23 (2.50) 128.27 (5.050) 13.27 (5.286) 138.3 (5.50) 15.7 (5.727) Dimensions and specifications subject to change without notice.

TX15 PLUG STRAIGHT THROUGH HOLE (ST) TYPE WITH MOUNTING EARS (M): 30 TO 120 ONTATS With : TX15-**P- ST-MH1 Without : TX15-**P- ST-MN1.2 3.3 (.130) 5.9 (.232) w0. X t0.3 (w0.16 X t0.12) D (Note1) 2.6 (.102) Note 2: Shown with hook pins. Insulator height. Refer to Mating Height Table. PB Hole Patterns (Ref.) 30, 50, 70 0, 60, 80, 100, 120 (Note 3) (Note 3) Polarization Key Polarization Key A A D D Note 3: Holes on both sides are needed for hook pin type. A D +0.3 +.012-0.1 -.00 ( ) 30 TX15-30P- ST-M*1 17.78 (.700) 23.98 (.9) 27.9 (1.100) 3.98 (1.377) 0 TX15-0P- ST-M*1 2.13 (.950) 30.33 (1.19) 3.29 (1.350) 1.33 (1.627) 50 TX15-50P- ST-M*1 30.8 (1.200) 36.68 (1.) 0.6 (1.600) 7.68 (1.877) 60 TX15-60P- ST-M*1 36.83 (1.50) 3.03 (1.69) 6.99 (1.850) 5.03 (2.127) 70 TX15-70P- ST-M*1 3.18 (1.700) 9.38 (1.9) 53.3 (2.100) 60.38 (2.377) 80 TX15-80P- ST-M*1 9.53 (1.950) 55.73 (2.19) 59.69 (2.350) 66.73 (2.627) 100 TX15-100P- ST-M*1 62.23 (2.50) 68.3 (2.69) 72.39 (2.850) 79.3 (3.127) 120 TX15-120P- ST-M*1 7.93 (2.950) 81.13 (3.19) 85.09 (3.350) 92.13 (3.627) Dimensions Dimensions in mm in (inches). mm (inches).

TX15 PLUG STRAIGHT THROUGH HOLE (ST) TYPE WITH MOUNTING EARS (M): 10 TO 200 ONTATS With : TX15-**P- ST-MH1 Without : TX15-**P- ST-MN1 B.2 6.99 (1.850).2 3.3 (.130) 5.9 (.232) 2.6 (.102) w0. X t0.3 (w0.16 X t0.12) D (Note1) Note 2: Shown with hook pins. Insulator height. Refer to Mating Height Table. (Note 3) PB Hole Patterns (Ref.) 10, 180 160, 200 (Note 3) Polarization Key Polarization Key A A A B D Note 3: B D A Holes on both sides are needed for hook pin type. A B D +0.3-0.1 +.012 ( -.00) 10 TX15-10P- ST-M*1 3.18 (1.700) 90.17 (3.550) 96.37 (3.79) 100.33 (3.950) 107.37 (.227) 160 TX15-160P- ST-M*1 9.53 (1.950) 102.87 (.050) 109.07 (.29) 113.03 (.50) 120.07 (.727) 180 TX15-180P- ST-M*1 55.88 (2.200) 115.57 (.550) 121.77 (.79) 125.73 (.950) 132.77 (5.227) 200 TX15-200P- ST-M*1 62.23 (2.50) 128.27 (5.050) 13.7 (5.29) 138.3 (5.50) 15.7 (5.727) Dimensions and specifications subject to change without notice.

TX15 PLUG STRAIGHT THROUGH HOLE (ST) TYPE WITHOUT MOUNTING EARS (N): 30 TO 120 ONTATS Without : TX15-**P- ST-N1 D.2 3.3 (.130) (Note 1) w0. X t0.3 (w0.16 X t0.12) Insulator height. Refer to Mating Height Table. PB Hole Patterns (Ref.) 30, 50, 70 0, 60, 80, 100, 120 Polarization Key Polarization Key A A A D +0.3 +.012-0.1 (-.00) 30 TX15-30P- ST-N1 17.78 (.700) 23.98 (.9) 26.38 (1.039) 0 TX15-0P- ST-N1 2.13 (.950) 30.33 (1.19) 32.73 (1.289) 50 TX15-50P- ST-N1 30.8 (1.200) 36.68 (1.) 39.08 (1.539) 60 TX15-60P- ST-N1 36.83 (1.50) 3.03 (1.69) 5.3 (1.789) 70 TX15-70P- ST-N1 3.18 (1.700) 9.38 (1.9) 51.78 (2.039) 80 TX15-80P- ST-N1 9.53 (1.950) 55.73 (2.19) 58.03 (2.289) 100 TX15-100P- ST-N1 62.23 (2.50) 68.3 (2.69) 70.83 (2.789) 120 TX15-120P- ST-N1 7.93 (2.950) 81.13 (3.19) 83.53 (3.289) Dimensions in mm (inches). Dimensions in mm (inches).

TX15 PLUG STRAIGHT THROUGH HOLE (ST) TYPE WITHOUT MOUNTING EARS (N): 10 TO 200 ONTATS Without : TX15-**P- ST-N1 D B ± 0.1(.00).2 6.99 (1.850).2 3.3 (.130) (Note 1) w0. X t0.3 (w0.16 X t0.12) Insulator height. Refer to Mating Height Table. PB Hole Patterns (Ref.) 10, 180 160, 200 Polarization Key Polarization Key B B A A A A A B D +0.3 +.012 ( ) -0.1 -.00 10 TX15-10P- ST-N1 3.18 (1.700) 90.17 (3.550) 96.37 (3.79) 98.77 (3.889) 160 TX15-160P- ST-N1 9.53 (1.950) 102.87 (.050) 109.07 (.29) 111.7 (.389) 180 TX15-180P- ST-N1 55.88 (2.200) 115.57 (.550) 121.77 (.79) 12.17 (.889) 200 TX15-200P- ST-N1 62.23 (2.50) 128.27 (5.050) 13.7 (5.29) 136.87 (5.389) Dimensions and specifications subject to change without notice.

TX15 PLUG RIGHT ANGLE THROUGH HOLE (LT) TYPE WITH MOUNTING EARS (M): 30 TO 120 ONTATS With : TX15-**P-LT-MH1 Without : TX15-**P-LT-MN1.2 3.3 (.130) 5.9 (.232) D 2.5 (.098) 9. (.370) 15.8 (.622) w0. X t0.3 (w0.16 X t0.12) (Note1) Shown with hook pins. PB Hole Patterns (Ref.) 30, 50, 70 0, 60, 80, 100, 120 A A D D Note 2: Applicable screws for without-hook-pin type: M2 A D +0.3 +.012-0.1 (-.00) 30 TX15-30P-LT-M*1 17.78 (.700) 23.98 (.9) 27.9 (1.100) 3.98 (1.377) 0 TX15-0P-LT-M*1 2.13 (.950) 30.33 (1.19) 3.29 (1.350) 1.33 (1.627) 50 TX15-50P-LT-M*1 30.8 (1.200) 36.68 (1.) 0.6 (1.600) 7.68 (1.877) 60 TX15-60P-LT-M*1 36.83 (1.50) 3.03 (1.69) 6.99 (1.850) 5.03 (2.127) 70 TX15-70P-LT-M*1 3.18 (1.700) 9.38 (1.9) 53.3 (2.100) 60.38 (2.377) 80 TX15-80P-LT-M*1 9.53 (1.950) 55.73 (2.19) 59.69 (2.350) 66.73 (2.627) 100 TX15-100P-LT-M*1 62.23 (2.50) 68.3 (2.69) 72.39 (2.850) 79.3 (3.127) 120 TX15-120P-LT-M*1 7.93 (2.950) 81.13 (3.19) 85.09 (3.350) 92.13 (3.627) Dimensions in mm (inches). Dimensions in mm (inches).

TX15 PLUG RIGHT ANGLE THROUGH HOLE (LT) TYPE WITH MOUNTING EARS (M): 10 TO 200 ONTATS With : TX15-**P-LT-MH1 Without : TX15-**P-LT-MN1 B.2 6.99 (1.850).2 3.3 (.130) 5.9 (.232) 9. (.370) 15.8 (.622) D 2.5 (.098) w0. X t0.3 (w0.16 X t0.12) (Note1) Shown with hook pins. PB Hole Patterns (Ref.) 10, 180 160, 200 A A A A B B D D Note 2: Applicable screws for without-hook-pin type: M2 A B D +0.3 +.012-0.1 ( -.00) 10 TX15-10P-LT-M*1 3.18 (1.700) 90.17 (3.550) 96.37 (3.79) 100.33 (3.950) 107.37 (.227) 160 TX15-160P-LT-M*1 9.53 (1.950) 102.87 (.050) 109.07 (.29) 113.03 (.50) 120.07 (.727) 180 TX15-180P-LT-M*1 55.88 (2.200) 115.57 (.550) 121.77 (.79) 125.73 (.950) 132.77 (5.227) 200 TX15-200P-LT-M*1 62.23 (2.50) 128.27 (5.050) 13.7 (5.29) 138.3 (5.50) 15.7 (5.727) Dimensions and specifications subject to change without notice.

2024 © sciencedocbox.com Privacy Policy | Terms of Service | Feedback