DYNAMIC VAPOR SORPTION ANALYZER FULLY AUTOMATED COMPACT BENCH-TOP DVS ANALYZER, FOR FAST AND ACCURATE SORPTION MEASUREMENTS. www.hidenisochema.com
The IGAsorp is a fully automated compact bench-top DVS analyzer, for fast and accurate sorption measurements using the dynamic flow technique for water and organic vapors. The measured vapor uptake and kinetics are used to characterize and understand materials in precisely defined environmental conditions. The IGAsorp has an ultra-sensitive microbalance which measures the weight of the sample as a function of humidity and temperature. Multiple sensors at the sample position allow precise feedback control of the experimental parameters. Humidity is determined by relative mixing of wet and dry gas streams which is measured and regulated at the sample position. The temperature is controlled by active feedback fluid circulation. TYPES OF MEASUREMENTS THAT CAN BE RECORDED Isotherm and kinetics analysis Cyclic/lifetime studies Moisture content determination Hydrate analysis Permeation and diffusion studies (MVTR) Amorphous phase detection TYPES OF MATERIALS THAT CAN BE TESTED Polymers Textiles Pharmaceuticals Porous materials Packaging materials Building and construction materials Food products and other consumables Wood, fibres, clays and other natural materials The IGAsorp uses the unique IGA method for the determination of the sorption kinetics and equilibrium isotherms. This ensures accurate and consistent analysis with faster analysis times making the optimum use of instrument time.
ACCURATE, CONSISTENT, RELIABLE. Providing optimal performance for demanding research applications, method critical quality control, and process analysis. ACCURATE Unrivalled long term microbalance stability. Traceable calibration and conformance values. CONSISTENT Unrivalled temperature and humidity control. IGA method for objective sorption equilibration determination. RELIABLE Designed for continuous operation in demanding R&D, process and QC environments. Minimal operator maintenance required. Built-in user conformance tests for verification of weight, humidity and temperature readings. System optimized for small sample sizes. Anodized aluminium sample chamber to eliminate static charge. Three independent temperature sensors to verify isothermal conditions. On-line embedded video help. Full 3 year parts and labour warranty as standard. UPTAKE E n THE IGA METHOD RELATIVE HUMIDITY TIME RH n The relative humidity in the sample chamber is ramped to the set point, RH n, and held constant through active control of the wet and dry gas streams. Equilibrium points are collected and plotted as an isotherm. RH n RELATIVE HUMIDITY WEIGHT TIME E n The weight change is analyzed in real time to determine kinetic parameters and simultaneously predict the equilibrium point, E n.
USER-FRIENDLY, VERSATILE. The IGAsorp offers straightforward and user-friendly operation with pre-programmed methods for routine use, such as materials screening and QC applications. Method templates may also be easily edited to suit individual requirements. The IGAsorp is versatile for advanced users with fully programmable options for detailed and demanding method development. The HIsorp software allows the programming of sample pre-treatments, heating and cooling ramps, multiple set-point temperatures for isotherm determination, and full control over the relative humidity or partial pressure in the sample chamber. HISORP SOFTWARE Fully compatible with all MS Windows operating systems, and featuring an intuitive user interface and high resolution graphics, HIsorp offers the user complete control of the IGAsorp. HIsorp uses the unique IGA method for real time kinetic analysis, and endpoint prediction. It also incorporates a series of useful and timesaving features including a PDF report generator, single click exports to Excel, automatic email notification on completion of measurement and on-line video help. Options include full 21CFR Part II compliance. TECHNIQUE HYPHENATION All IGAsorp models can be interfaced with complementary characterization tools, including Raman and Infrared (IR) probes, optical systems and a range of Hiden Analytical quadrupole mass spectrometers. EXTENDED OPERATING RANGES The standard IGAsorp analyzer can be readily upgraded to other IGAsorp models, IGAsorp-CT and IGAsorp-HT, offering extended operating temperature and vapor partial pressure ranges, as required. OPTIONS AND ACCESSORIES A range of options and accessories are available including moisture vapor transmission rate (MVTR) cells, organic vapor measurement capability, and an electrically actuated external water feed for extended operation.
EXAMPLE APPLICATION DATA dm/dt (mg/min) %RH WEIGHT (mg).15 -.5 -.25 8 6 4 2 37.9 37.8 37.7 37.6 37.5 2 4 6 8 1 12 14 2 4 6 8 1 12 14 Figure 1: A simple test used to detect amorphous phase. Data courtesy of GSK Amorphous to crystalline phase transition 2 4 6 8 1 12 14 WEIGHT LOSS /MICROGRAMS -2-4 -6-8 -1-12 -14-16 5 1 15 2 25 Figure 2: MVTR results from a polymer film. Data courtesy of GSK 3 LEGEND FORMAT: H1 H2 MVTR (ug/cm/hour) 76% 66% RH MVTR=.85 76% 56% RH MVTR=.123 76% 46% RH MVTR=.1494 76% 36% RH MVTR=.174 75% 26% RH MVTR=.26 76% 16% RH MVTR=.241 76% 6% RH MVTR=.278 76% % MVTR=.313 14 1 WEIGHT CHANGE (%d.b) 12 1 8 6 4 WEIGHT RH 9 8 7 6 5 4 3 RELATIVE HUMIDITY (%) WEIGHT (%) WET BASIS.6.5.4.3.2 MEDIUM SORPTION RESOLUTION MEDIUM DESORPTION RESOLUTION COARSE SORPTION RESOLUTION COARSE DESORPTION RESOLUTION 2 2 1 5 1 15 2 25 3 35 4 45 5 Figure 3: Example of isothermal kinetic response data. Reference Hiden Isochema application note 121.1 1 2 3 4 5 6 7 8 9 %RH Figure 4: Comparision between isotherms at coarse and medium resolution. Data courtesy of Boehringer Ingelheim Pharma GmbH & Co KG 1 8 %RH 6 4 TREATED POLYMER UNTREATED POLYMER TOTAL WEIGHT (MILLIGRAMS) 2 NUCLEATION DELAY SURFACE ADSORPTION GROWTH MONOHYDRATE FORMATION MICROSCOPIC DIFFUSION COEFFICIENT 5 1 15 2 Figure 5: Example of a hydration-dehydration cycle. Data courtesy of Pharamaterials Ltd 1 2 3 4 5 6 RELATIVE HUMIDITY (%) Figure 6: Variation of the microscopic diffusion coefficient with relative humidity. Reference Hiden Isochema application note 124 7 8 9 1
TECHNICAL SPECIFICATIONS IGAsorp WEIGHT Capacity Weighing range Resolution Stability HUMIDITY Control range 5 gram 25 / 2 / 1 mg (fixed) or user selectable (optional) from.5 microgram nominal +/- 1 microgram / week to 98 %RH Absolute Calibration Accuracy +/-1 % (-9 %); +/-2 % (9-1 %) Regulation accuracy Minimum control increment Gas Supply Maximum flow rate +/-.1 %RH.2 %RH Dry air, N 2 or He 5 ml/min The IGAsorp is a fully automated compact bench-top DVS analyzer, for fast and accurate sorption measurements using the dynamic flow technique for water and organic vapors. TEMPERATURE Measurement range 5 5 C Regulation accuracy +/-.1 C Pre-heater Optional, to 25 C IGAsorp CT Temperature Measurement range 5 85 C Regulation accuracy +/-.1 C Pre-heater Optional, to 35 C IGAsorp HT Temperature Measurement range 5 3 C Pre-heater Included, to 35 C Water Vapor Partial Pressure Range 5 mbar SUPPORT Hiden Isochema offers unrivalled technical support free of charge, for the lifetime of the instrument. Telephone and email access to our team of highly qualified engineers with a guaranteed response within 24 hours. 3 year warranty as standard. A range of service contracts available. CONTACT US If you have any questions about IGAsorp or any of Hiden Isochema products or services, please give us a call, we will be happy to help. Tel: +44 () 1925 244 678 Email: info@hidenisochema.com Web: www.hidenisochema.com FS 535721