SOLNOID VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) brass body, NMUR, / / N / /-/ Series 0 FTURS The monostable spool valves, series, have TÜV certifi ed I 60 Functional Safety data and can be used up to SIL /K 7 The solenoid operated spool valves have threaded port connections and NMUR interface The same spool valve can be adapted for / N or / functions for controlling double-acting and single-acting actuators ll the exhaust ports of this spool valve are connectable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matter (environmentally-protected construction) an be externally piloted (external air pilot supply) to convert valve to zero minimum operation by fl ipping a gasket The solenoid valves satisfy all relevant Directives GNRL Differential pressure - 0 bar [ bar 00 kpa] Flow (Qv at 6 bar) 700 l/min (NR) fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, fi ltered - 0 to + 60 VMQ (silicone) + PUR (polyurethane) MTRILS IN ONTT WITH FLUID ( ) nsure that the compatibility of the fluids in contact with the materials is verified ody, end covers rass Spool valve internal parts rass, stainless steel, POM Interface plates Glass-fi lled P ore tube Stainless steel ore and plugnut Stainless steel ore spring Stainless steel Seals & discs NR Top disc P Disc holder POM artridge () Welded, packless ISI 0 Seat rass Seat insert POM Shading coil opper Rider ring () PTF UP LP Not vailable 0,W -,W RP-MP P Not vailable 0,W -,W Ultra Low Low Reduced and Medium asic POWR LVLS - cold electrical holding values (watt) SPIFITIONS pipe orifice flow coefficient kv operating pressure differential (bar) prefix optional solenoids max. (PS) level NM TX/NL (gas/dust) min. () basic catalogue number IP6 air ( ) 7 & x d x em x m x i x n ( ) (mm) (m /h) (l/min) ~ ~/ F NF NK M PV IS ZN S Solenoid air pilot operated - spring return (monostable) / 6 0,6 0 0 / 0 0 P - - 0 () / 6 0,6 0 0 / 0 0 P - - - - - - - G0 () / 6 0,6 0 0 / 0 0 LP - - 0 () / 6 0,6 0 0 / 0 0 LP - - - - - - - G0 () Solenoid air pilot operated and return (bistable) / 6 0,6 0 0 / 0 0 P - - 0 / 6 0,6 0 0 / 0 0 P - - - - - - - G0 / 6 0,6 0 0 / 0 0 LP - - 0 / 6 0,6 0 0 / 0 0 LP - - - - - - - G0 Select for NPT NSI.0. or select G for ISO G (/) vailable feature vailable feature in D only. () ertifi ed I 60 Functional Safety data, use suffi x "SL". () Zero minimum is only achieved if external pressure is applied. ll leafl ets are available on: www.asco-process-scope.com 007/R0 第 / 页 PI-6--G
SRIS PRFIX TL prefi x level description 6 7 LP RP MP P S D U Dustproof TX (N 0--) * - - - F xplosionproof - NM,, 6, 7, - - V xplosionproof - NM,, 6, 7, - 6 SS - - M ncapsulated TX (N 00 & N 00) * - - T Threaded conduit/hole (M0 x.) - - I S S Intrinsically safe with S coil TX (N 000) * - - - N F Flameproof - lum. TX (N 00) * - - N L Flameproof - ast Iron TX (N 00) * - - N K Flameproof - lum. TX (N 00) * - - - P V ncapsulated TX (N 00) * - - S Solenoid with spade plug connector (N 6070) - - W P Waterproof IP67 - Metal enclosure (N 6070) - - W S Waterproof IP67-6 SS enclosure (N 6070) - - W S M 6 SS "M" enclosure TX (N 00 & N 000) * - - W P D U Dustproof TX (N 0--) - Metal enclosure * - - - W S D U Dustproof TX (N 0--) - 6 SS enclosure * - - - W P I S I.S. with Metal IP67 enclosure TX (N 000) * - - - W S I S I.S. with Metal IP67-6 SS enclosure TX (N 000) * - - - W S N F Flameproof - 6 SS TX (N 00) * - - Z N ncapsulated Non Sparking TX (N 00) * - - T Threaded conduit (/" NPT) - - H T lass H - High temperature, +0 ambient temp. - - - X Other special constructions - - SUFFIX TL suffi x level description 6 7 LP RP MP P M O Push type or screw type manual operator / - - S L ertifi ed I 60 Functional Safety data () / - - PRODUT SLTION GUID STP Select basic catalogue number, including pipe thread identifi cation letter. Refer to the specifi cations table on page. xample: G0 STP Select prefi x (combination). Refer to the specifi cations table on page and the prefi x table on page, respect the indicated level. xample: M STP Select suffi x (combination) if required. Refer to the suffi x table on page, respect the indicated level. xample: MO STP Select voltage. Refer to standard voltages on page. xample: 0V / 0Hz STP Final catalogue / ordering number. xample: M G0MO 0 V / 0 Hz OPTIONS & SSORIS series pipe exhaust protector (stainless steel) G / 600 () NPT / 600 () vailable feature vailable feature in D only - Not available * TX solenoids are also approved to N 0-- (dust) and N 6- (non electrical valves) () Provided with "SL" suffi x () Not to use with MO suffi x ORDRING XMPLS: S G 0 0V / 0 Hz S G 0 SL 0V / 0 Hz S G 0 MO 0V / 0 Hz SHT 0 MO 0V / 0 Hz ISS G 0 MO V / D WPIS G 0 V / D M 0 MO 0V / 0 Hz F G H 0 MO 0V / 60 Hz prefi x () pipe thread voltage basic number () suffi x () Prefi x F should always be used with the letter H in the basic number. ll leafl ets are available on: www.asco-process-scope.com 6-- 第 / 页 007/R0
LTRIL HRTRISTIS oil insulation class F onnector Spade plug (cable Ø 6-0 mm) onnector specification ISO 00 / N 70-0, form lectrical safety I Standard voltages D () V - V (~) V - V - V - 0V/0Hz; other voltages and 60Hz are available on request ratings operator electrical ambient replacement coil prefix inrush holding hot/cold temperature enclosure safety code option range (TS) protection type ~ ~ ~ () (V) (V) (W) (W) ( ) (N 60) 0 V/0 Hz V D asic (P) S 0, /, -0 to +7 N 6070 moulded IP6 00-7 00-0 SDU 0, /, -0 to +7 II D IP6 T 00 (~)/ () moulded IP6 - () - () 0 WP 0, /, -0 to +7 N 6070 steel IP67 000-7 000-0 WPDU 0, /, -0 to +7 II D IP67 T 00 steel IP67 - () - () 0 WS 0, /, -0 to +7 N 6070 st. steel IP67 000-7 000-0 WSDU 0, /, -0 to +7 II D IP67 T 00 st. steel IP67 - () - () 0 (WS)NF/NL 0, - -60 to +/0/60 II G/D x d II T6/T/T alu/steel IP67 000-7 - 0 (WS)NF/NL - - - /, -60 to +0/60/7 II G/D x d II T6/T/T alu/steel IP67-000- 0 NK 0, /, -0 to +0/60 II G/D x d II+H T(~/) aluminium IP6 000-7 000-0 M 0, /, -0 to +0 II G/D x em II T steel IP67 000-7 00-0 WSM 0, /, -0 to +0 II G/D x em II T st. steel IP67 000-7 00-0 PV 0, /, -0 to +6 II G/D x m II T(~)T() moulded IP6 - () - () 0 F 0, /, -0 to +/0 NM Types 7 and NM X 60-0 70-006 06 V 0, /, -0 to +/0 NM Types 7 and -6 SS NM X 60-0 70-006 06 ZN 0, /, -0 to +0 II G/D x n II T moulded IP6 - () - () 0 (LP) S,,,,7/,7-0 to +60 N 6070 moulded IP6 - () - () 07 WP,,,,7/,7-0 to +60 N 6070 steel IP67 - () - () 0 WS,,,,7/,7-0 to +60 N 6070 st. steel IP67 - () - () 0 NF - -, -/, -0 to +7 II G/D x d II T6 aluminium IP67 - () - () 0 NL - -, -/, -0 to +7 II G/D x d II T6 cast iron IP67 - () - () 0 WSNF - -, -/, -0 to +7 II G/D x d II T6 st. steel IP67 - () - () 0 M,,,,7/,7-0 to +0/ II G/D x em II T6/T steel IP67 - () - () 0 WSM,,,,7/,7-0 to +0/ II G/D x em II T6/T st. steel IP67 - () - () 0 PV - - -,7/,7-0 to +60 II G/D x m II T6 moulded IP6 - - () 0 F - - -,7/,7-0 to +0 NM Types 7 and NM X - - () V - - -,7/,7-0 to +0 NM Types 7 and -6 SS NM X - - () ISS () - - - 0,/0, -0 to +60 II G/D x ia II T6 moulded IP6-676-00 WPIS () - - - 0,/0, -0 to +60 II G/D x ia II T6 steel IP67-600-00 0 WSIS () - - - 0,/0, -0 to +60 II G/D x ia II T6 st. steel IP67-600-00 0 ZN - - -,7/,7-0 to +0 II G/D x n II T moulded IP6 - - () 07 - Not available () Refer to the dimensional drawings on pages to 6. () Intrinsically safe pilots: heck the electrical characteristics in the corresponding catalogue pages (ISS/WPIS/WSIS operators). () Multiple coil kits available under TX, contact us safety parameters prefix U I I I P I L I I option (D) (V) (m) (W) (µf) (mf) (LP) ISS 00, 0 0 WPIS/WSIS 00, 0 0 DDITIONL OPTIONS Valves confi gured for external pilot air supply, TPL 07 Other pipe threads are available on request x m (prefi x "PV") execution can be supplied in various cable lengths ompliance with "UL", "S" and other local approvals available on request /" NPT (prefi x "T") and M0 x. (prefi x "T") conduits (aluminium or 6 SS) available for steel solenoid housing Set of stainless steel mounting screws, catalogue number 70 INSTLLTION Installation/maintenance instructions are included with each valve The solenoid valves can be mounted in any position without affecting operation I 60 Functional Safety (Suffi x SL), allowable temperature range: -0 to +60. Probability of failure on demand, contact us Spool valve supplied with two interface plates with NMUR mating surfaces. Depending on function (/ N or /), position one of the two plates on the spool valve body before installing on actuator Dowel pin (if necessary), bolts and gaskets are standard supplied It is necessary to connect pipes or fi ttings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifi er is: NPT (NSI.0.); G G (ISO /) x d (prefi x "NF") enclosure is provided with a /" NPT threaded entry hole [optionally, M0 x, (prefi x "T")] and is supplied without cable gland x d (prefi x "NK") enclosure is provided with a /" NPT threaded entry hole [optionally, /" NPT (prefix "T") or M0 x, (prefix "T")] and is supplied without cable gland x em (prefi x "M") execution: solenoid enclosure has a cable gland with integral strain relief for cables with an o.d. from 7 to mm and is provided with an internal and external connection facility for an earthing or bonding conductor Valves with suffi x "SL" are provided with a specifi c exhaust protector 第 / 页 SRIS ll leafl ets are available on: www.asco-process-scope.com 6-- 007/R0
SRIS DIMNSIONS (mm), WIGHT (kg) ll types D Interface plates mounting holes. mm dia.; 0, 6 / x / x / 7 7 Spotfacing: mm dia., depth mm; screws (Hc M x ), engaged length: 7 mm One mm dia. hole for dowel pin - in position : / N function plate - in position : / function plate D O-ring seals (supplied) TYP 0 Prefi x "S", "ZN" and "SDU" Solenoid asic poxy moulded I / ISO 00 (S/SDU) N 00 (ZN) IP6 / II D IP6 T 00 to 00 / II G/D x n II 0 / 0 TYP 0 Prefi x "NF", "NL" and "WSNF" Solenoid asic luminium, steel; epoxy coated (NF and NL) ISI 6 SS (WSNF) N 00 and N 0-- IP67 / II G/D x d II 0 / 0 6 / 60 0 60 / NPT D 0 6 0 / 0 TYP 0 Prefi x "NK" Solenoid asic luminium; epoxy coated N 00 and N 0-- IP6 / II G/D x d II + H TYP 0 Prefi x "WP", "WS" / "WPDU", "WSDU" / "M", "WSM" Solenoid asic Steel; epoxy coated (WP, WPDU and M) ISI 6 SS (WS, WSDU and WSM) I / N 00 & N 00 N 0-- IP67 / II D IP6 T to 00 / II G/D x em II 0 / 0 / / / NPT 60 60, 6, 00 6 0 ll leafl ets are available on: www.asco-process-scope.com 6-- 第 / 页 007/R0
SRIS DIMNSIONS (mm), WIGHT (kg) TYP 0 Prefi x "PV" Solenoid asic poxy encapsulated N 00 and N 0-- II G/D x m II IP6 0 / 0 / TYP 06 Prefi x "F" and "V" Solenoid asic poxy encapsulated IS-6 NSI / NM Types 7 and Note: applicable to solenoid only G0 / G0 / "T" (M0x,) "T" (/ NPT) 60 60 D 6 D TYP 07 Prefi x "S" / "ZN" Solenoid poxy moulded I / ISO 00 (S) N 00 (ZN) IP6 / II G/D x n II 0 / 0 TYP 0 Prefi x "NF", "NL" and "WSNF" Solenoid luminium, steel; epoxy coated (NF and NL) ISI 6 SS (WSNF) N 00 and N 0-- IP67 / II G/D x d II 0 / 0 / NPT 60 0 60 / NPT D 0 6 TYP 0 Prefi x "WP", "WS" / "M", "WSM" Solenoid Prefi x "WPIS" / "WSIS" Solenoid Metal; epoxy coated / ISI 6 SS I / N 00 & N 00 / N 000 N 0-- IP67 / II G/D x em II / II G/D x ia II 0 / 0 TYP 0 Prefi x "PV" Solenoid poxy encapsulated N 00 and N 0-- II G/D x m II IP6 0 / 0 / NPT / NPT 60 60 0 D 6 第 / 页 ll leafl ets are available on: www.asco-process-scope.com 6-- 007/R0
SRIS DIMNSIONS (mm), WIGHT (kg) TYP TYP Prefi x "F" and "V" Solenoid poxy encapsulated IS-6 NSI / NM Types 7 and Note: applicable to solenoid only G0 / G0 0 / 0 Prefi x "ISS" Solenoid Polypropylene moulded N 000 and N 0-- II G/D x ia II / "T" (M0x,) "T" (/ NPT) / NPT 60 6 60 D D 67 type prefix option level D weight () monostable bistable 0 S / SDU / ZN basic 07,7, 6,,,6 0 NF basic 70 6 6, - -,, 0 WSNF basic 70 6 6, - -,7, 0 NL basic 70 6 6, - -,, 0 NK basic 0 07 - -,6,6 0 WP/WPDU/WS/WSDU/M/WSM basic 60 6 0 - -,6, 0 PV basic, 67,,6, 06 F / V basic, 0,, 7,,7,0 07 S / ZN low, 06,, 7,,, 0 NF low 70 6 6, - -,, 0 WSNF low 70 6 6, - -,7, 0 NL low 70 6 6, - -,, 0 WP / WS / M / WSM / WPIS / WSIS low 60 6 07, - -,6, 0 PV low 0,, 67,,67,0 F / V low, 0,, 7,,66, ISS low 7,,,,70,6 () Incl. coil(s) and connector(s) x d certifi ed cable gland (on request) Three-core cable, length m able gland for unarmoured cable with 7 to mm dia. sheath 6 onnector rotatable by 0 increments (Ø 6-0 mm) Push type or screw type manual operator, suffi x MO xternal pilot air supply, / pipe onnectable pilot exhaust port Non-connectable pilot exhaust port SSORIS ø / NPT ø 0 / NPT pilot exhaust protector part number 76-0-00 / NPT pilot top exhaust low (SO solenoid interface) Ø Ø - / - - 0 - exhaust protector (stainless steel) ll leafl ets are available on: www.asco-process-scope.com 007/R0 6--6 第 6/ 页
SPOOL VLVS pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, NMUR, / 0 0 /-/ Series FTURS The monostable spool valves, series, have TÜV certifi ed I 60 Functional Safety data and can be used up to SIL /K 7 The solenoid operated spool valves have threaded port connections and NMUR interface The same spool valve can be adapted for / N or / functions for controlling double-acting and single-acting actuators ll the exhaust ports of this spool valve are connectable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matter (environmentally-protected construction) The solenoid valves satisfy all relevant Directives GNRL Differential pressure Flow (Qv at 6 bar) - 0 bar [ bar 00 kpa] 700 l/min (NR) fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, fi ltered - to + 0 VMQ (silicone) + PUR (polyurethane) MTRILS IN ONTT WITH FLUID ( ) nsure that the compatibility of the fluids in contact with the materials is verified ir operated NOMO solenoid (pilot) interface ody, end covers rass, ISI 6L rass, ISI 6L Interface plates Glass-fi lled P Glass-fi lled P Spool valve internal parts rass, stainless steel, POM rass, stainless steel, POM Seals NR NR Pilot internal parts - Size (06.6.0N), refer to catalogue pages: 0 pilot (FS/FSD/ FVT/FL/FSIS/ FSDIS/FVTIS) and 60 piezotronic pilot (PIS/PISIS) IR OPRTD SPIFITIONS pipe orifice flow coefficient kv operating pressure differential (bar) max. (PS) prefix optional basic catalogue number min. air ( ) ( ) (mm) (m /h) (l/min) ~ Pilot air operated - spring return (monostable) / 6 0,7, 0 0-0 () Pilot air operated and return (bistable) / 6 0,7, 0 0-0 UP LP 0,00W - 0,W 0,W -,W Ultra Low Low RP-MP Not available Reduced and Medium P Not available asic POWR LVLS - cold electrical holding values (watt) NOMO SOLNOID (PILOT) INTRF SPIFITIONS pipe orifice flow coefficient kv operating pressure differential (bar) max. (PS) min. air ( ) level prefix optional solenoids basic catalogue number TX/NL IP6 x i ( ) (mm) (m /h) (l/min) ~ ~/ FSIS FSDIS FVTIS PISIS FS FSD FVT FL PIS NOMO Solenoid air pilot operated - spring return (monostable) / 6 0,6 0 0 0 LP - - - - - 0 () / 6 0,6 0 - LP - - - - - - 0 () / 6 0,6 0 UP - - - - - - - 0 () Solenoid air pilot operated and return (bistable) / 6 0,6 0 0 0 LP - - - - - 0 / 6 0,6 0 - LP - - - - - - 0 / 6 0,6 0 UP - - - - - - - 0 Select for NPT NSI.0. or select G for ISO G (/) vailable feature vailable feature in D only. () ertifi ed I 60 Functional Safety data, use suffi x "SL". 第 7/ 页 ll leafl ets are available on: www.asco-process-scope.com 6--7 007/R0
SRIS PRFIX TL prefi x level description 6 7 UP LP RP P F S Solenoid + spade plug DIN 60,, mm, industry standard (N 6070) - - - F S D Solenoid + spade plug ISO 7/DIN 60, mm, form (N 6070) - - - F V T Solenoid with connection M, LD + protection (N 6070) - - - F L Solenoid with cable ends, LD + protection (N 6070) - - - F S I S Intrinsically safe, spade plug DIN 60,, mm, industry stand., TX (N 000) * - - - F S D I S Intrinsically safe, spade plug ISO 7/DIN 60, mm, form, TX (N 000) * - - - F V T I S Intrinsically safe, connector M (straight), LD + protection, TX (N 000) * - - - P I S Solenoid, spade plug DIN 60,, mm, industry stand., TX (N 6070) - - - P I S I S Intrinsically safe, spade plug DIN 60,, mm, industry stand., TX (N 000) * - - - SUFFIX TL suffi x level description 6 7 UP LP RP P G D Non-electrical, GD c, construction safety, gas/dust-tx (N 6-) - - - - M S Screw type manual operator () - / - - M O Push type manual operator / / - - S L ertifi ed I 60 Functional Safety data / / - - OPTIONS & SSORIS series exhaust pipe protector (stainless steel) G / 600 ( ) NPT / 600 () M 600 () vailable feature vailable feature in D only - Not available * TX solenoids are also approved to N 0-- (dust) and N 6- (non electrical valves) () Not to use with "SL" suffi x () Provided with "SL" suffi x PRODUT SLTION GUID STP Select basic catalogue number, including pipe thread identifi cation letter. Refer to the specifi cations table on page 7. xample: G0 STP Select prefi x (combination). Refer to the specifi cations table on page 7 and the prefi x table on page, respect the indicated level. ir operated version, does not use prefi x. xample: FS STP Select suffi x (combination) if required. Refer to the suffi x table on page, respect the indicated level. GD suffi x available for air operated version only (do not use manual operator suffi x) xample: MO STP Select TPL, on page, mandatory for the pilot 60 (PISIS), HV D ( mw) and HV D ( mw). dd "X" between the prefi x "PISIS" and the basic catalogue number. STP Select voltage. Refer to standard voltages on page. xample: 0V / 0Hz STP 6 Final catalogue / ordering number. xample: FS G0MO 0 V / 0 Hz ORDRING XMPLS: FS G 0 0V / 0 Hz FS G 0 SL 0V / 0 Hz FSD G 0 MO 0V / 0 Hz FVT 0 MO 0V / 0 Hz FL G 0 MO V / D PISIS G 0 MO 6V / D PISIS G 0 SLMO 6V / D PISIS X G 0 MS TPL0666 HV /D G 0 G 0 GD G 0 GDSL G 0 prefi x pipe thread basic number voltage TPL suffi x ll leafl ets are available on: www.asco-process-scope.com 6-- 第 / 页 007/R0
NOMO SOLNOID (PILOT) INTRF LTRIL HRTRISTIS oil insulation class F onnector Spade plug (cable Ø - 6 mm or cable Ø 6-7 mm) onnector specification DIN 60,, mm, industry standard (FS/PIS/PISIS prefi xes) ISO 7 / DIN 60, mm, form (FSD/FSDIS prefi xes) M, I 607--/NOMO 0-6-0N (FVT/FVTIS prefi xes) onnection M (FVT/FVTIS prefi xes) or cable ends (FL prefi x) lectrical safety I Standard voltages D () FS/FSD: V - V; FVT/FL: V FSIS/FSDIS/FVTIS: V - V PIS: V to 70V; PISIS: 6V, V, V, V (~) FS/FSD: V - V - 0V/0Hz; other voltages and 60Hz are available on request PIS: V to 70V ratings operator electrical ambient replacement coil prefix inrush holding hot/cold temperature enclosure safety code option range (TS) protection type ~ ~ ~ () (V) (V) (W) (W) ( ) (N 60) - - (LP) FS/FSD,,, /, - to +60 N 6070 moulded IP6 - - 0 FS/FSD, (6),6 (6), (6) - - to +60 N 6070 moulded IP6 - - 0 FVT/FL () - - -,/, - to +60 N 6070 moulded IP67/IP6 - - 0-0 FSIS ()() - - - 0, -0 to +0 II GD x ia II T moulded IP6 - - 0 FSDIS ()() - - - 0, -0 to +0 II GD x ia II T moulded IP6 - - 0 FVTIS ()() - - - 0, -0 to +0 II GD x ia II T moulded IP67 - - 0 Ultra low (UP) PIS - - - 0,007-0 to +60 - moulded IP6 - - 06 PISIS ()() 6V - - - 0,00-0 to +0 II GD x ia II T6 moulded IP6 - - 06 PISIS ()() V - - - 0,0-0 to +0 II GD x ia II T6 moulded IP6 - - 06 PISIS ()() LV - - - 0,0-0 to +0 II GD x ia II T6 moulded IP6 - - 06 PISIS ()() HV - - - 0,0-0 to +0 II GD x ia II T6 moulded IP6 - - 06 PISIS ()() LV - - - 0,06-0 to +0 II GD x ia II T6 moulded IP6 - - 06 PISIS ()() HV - - - 0, -0 to +0 II GD x ia II T6 moulded IP6 - - 06 - Not available () Refer to the dimensional drawings on pages 0 and. () Piezotronic standard voltages: Prefi x PISIS: 6 V D / mw V D / mw L V D / mw H V D / mw L V D / 6 mw H V D / mw Turn ON voltage U ON 6.. V 7,.. V 0,.. 6 V 0,.. 6 V,6.. V,6.. V Turn OFF voltage U OFF V, V, V, V V V Peak current 6 m 0 m 6, m, m 0 m m Holding current 0, m, m m,7 m, m, m able + max. barrier resistances (R S + R ) 00 Ω max. 00 Ω max. 00 Ω max. 70 Ω max. 00 Ω max. 70 Ω max. safety parameters prefix option U I I I P I L I I (D) (V) (m) (W) (µf) (mf) (LP) FSIS 00,6 0 0 FSDIS/FVTIS 00,6 0 0 Ultra low (UP) PISIS 0 00 0, 0 0 () Intrinsically safe pilots: heck the electrical characteristics in the corresponding catalogue pages (FSIS/ FSDIS/FVTIS: 0 pilots / PISIS: 60 pilot). () FSIS/FSDIS/FVTIS (0 pilots): V : I (ON) min., with LD m; U (ON) min., V; U (max.) recommended V; U (OFF), V; I (OFF) 0 m V : I (ON) min., with LD m; U (ON) min. 6, V; U (max.) recommended V; U (OFF),7 V; I (OFF) 7 m () Values for LD + protection. Use with TPL 067 (FS and FSD prefi xes) (6) : 0 V - Not available DDITIONL OPTIONS TPL numbers: TPL 066: Piezotronic, PISIS prefi x, HV ( mw) TPL 0666: Piezotronic, PISIS prefi x, HV ( mw) TPL numbers: TPL 067: LD and protection, FS / FSD prefi xes - dd 0, W (D) and 0, W/V () Only available in V /D and V Set of stainless steel mounting screws, catalogue number 70 Other pipe threads are available on request SRIS INSTLLTION Installation/maintenance instructions are included with each valve The solenoid valves and air operated valves can be mounted in any position without affecting operation I 60 Functional Safety (Suffi x SL), allowable temperature range: -0 to +60. Probability of failure on demand, contact us Spool valve supplied with two interface plates with NMUR mating surfaces. Depending on function (/ N or /), position one of the two plates on the spool valve body before installing on actuator Dowel pin (if necessary), bolts and gaskets are standard supplied It is necessary to connect pipes or fi ttings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifi er is: NPT (NSI.0.); G G (ISO /) Valves with suffi x "SL" are provided with a specifi c exhaust protector 第 / 页 ll leafl ets are available on: www.asco-process-scope.com 6-- 007/R0
SRIS DIMNSIONS (mm), WIGHT (kg) Type 0..06: NOMO (06.6.0N) Type 07: ir operated - ( x /) ( x /) 6 mounting holes:, mm dia. (Spotfacing: mm dia., depth mm) One mm dia. hole for dowel pin: - in position : / N function plate - in position : / function plate O-ring seals (supplied) xhaust reducer or exhaust protector 6 Interface plate 0 G/ - ( x /) ( x /) 6 TYP 0 Prefi x "FS" and "FSD" Solenoid 0 pilot Polyarylamide I / DIN 60,, mm/ mm (cable - 6 mm) IP6 0 / 0 0MS / 0MS / 0MO / 0MO TYP 0 Prefi x "FVT" Solenoid 0 pilot Polyarylamide I / M connection + LD and protection IP67 0 / 0 0MS / 0MS / 0MO / 0MO 60 7, M M 0 7 7 TYP 0 Prefi x "FL" Solenoid 0 pilot Polyarylamide I / cable ends + LD and protection IP6 0 / 0 0MS / 0MS / 0MO / 0MO TYP 0 Prefi x "FSIS" and "FSDIS" Solenoid 0 pilot Polyarylamide I / DIN 60,, mm/ mm (cable 6-7 mm) N 000 and N 0-- IP6 / II GD x ia II 0MO / 0MO, M M 6 ll leafl ets are available on: www.asco-process-scope.com 0 007/R0 6--0 第 0/ 页
SRIS DIMNSIONS (mm), WIGHT (kg) TYP 0 Prefi x "FVTIS" Solenoid 0 pilot Polyarylamide I / connector M + LD and protection N 000 and N 0-- IP67 / II GD x ia II 0MO / 0MO TYP 06 Prefi x "PIS" and "PISIS" Solenoid Ultra low 60 pilot (piezotronic) Polyamide, epoxy coated I, DIN 60,, mm N 000 and N 0-- (PISIS) IP6 / II GD x ia II 0MO / 0MO, 60 7 M M 0 0 TYP 07 ir operated version No prefi x Use "SL", "GD" or "GDSL" suffi x IP6 / II GD c 0 / 0 0 onnector rotatable by 0 increments (cable - 6 mm) onnector rotatable by 0 increments (cable 6-7 mm) Manual operator location onnectable pilot exhaust port type prefix option level weight () monostable bistable 0 FS / FSD low 0,76,0 0 FVT low 0,76,0 0 FL low 0,6,07 0 FSIS / FSDIS low 0,,0 0 FVTIS low 0,0,6 06 PIS / PISIS ultra low 0,6,06 07 - - 0, 0, () Incl. connector(s), except FVT. SSORIS Ø Ø M / -, 0 - exhaust protector (stainless steel) 第 / 页 ll leafl ets are available on: www.asco-process-scope.com 6-- 007/R0
SRIS ll leafl ets are available on: www.asco-process-scope.com 6-- 第 / 页 PI-06-00-G -- vailability, design and specifications are subject to change without notice. ll rights reserved. 007/R0