Measurement. Measurement in Chemistry. Measurement. Stating a Measurement. The Metric System (SI) Basic Chemistry. Chapter 2 Measurements

Similar documents
2.1 Units of Measurement. Copyright 2011 Pearson Education, Inc.

Measurement Chapter 1.6-7

Measurement and Calculations

Chemistry in Our Lives. Chemistry and Chemicals

Name Period Date. Measurements. Fill-in the blanks during the PowerPoint presentation in class.

Welcome to Chemistry 121

Learning Plan 4 Chapter 9

Math Skills Needed For Chemistry

Lecture Presentation. Chapter 1. Chemistry in Our Lives. Karen C. Timberlake

Chapter 1 and 3 Guided Notes

Chapter 1 Matter,Measurement, and Problem Solving

Measurement. Scientific Notation. Measurements and Problem Solving. Writing Numbers in Scientific Notation

Pre-Lab 0.2 Reading: Measurement

Chapter 2: Standards for Measurement. 2.1 Scientific Notation

Chapter 2. Measurements and Calculations

2 Standards for Measurement. Careful and accurate measurements of ingredients are important both when cooking and in the chemistry laboratory!

Chapter 2 Measurements & Calculations. Quantity: A thing that can be measured. ex. Length (6.3 ft), mass (35 kg), and time (7.2 s)

Introductory Chemistry: A Foundation, 6 th Ed. Introductory Chemistry, 6 th Ed. Basic Chemistry, 6 th Ed.

Chapter 2 Measurement and Problem Solving

Unit 1 - INTRODUCTION MEDICAL MATH Listening guide

Chemistry and Measurement

5) If you count 7 pennies, you can only report one significant figure in that measurement. Answer: FALSE Diff: 1 Page Ref: 2.3

Chapter 5 Assessment. 164 Chapter 5 Measurements and Calculations. 8. Write each of the following numbers in standard scientific notation. a.

The number of stars in a galaxy is an example of an estimate that should be expressed in scientific notation.

Measurement and Units. An Introduction to Chemistry By Mark Bishop

Length is the distance from one point to another. Length has standard units of measurement such as inches or centimeters.

Name /100. MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

WHAT IS CHEMISTRY? Chemistry 51 Chapter 1. Chemistry is the science that deals with the materials of the universe, and the changes they undergo.

Chapter 3 Metric Units and Conversions

International System of Units 3.2. Slide 1of 33

Analyzing Data. Units and Measurement In your textbook, read about SI units. STUDY GUIDE. Section 2.1 CHAPTER 2. Complete the following table.

Accuracy of Measurement: how close your measured value is to the actual measurement

CHAPTER 2 Data Analysis

CHEM134, Fall 2018 Dr. Al-Qaisi Chapter 1 review

Syllabus Tutors Review from previous class. Resources. Lecture: MW 5:30PM-6:50PM Room 425

Measurement Stations. Length, Mass, Volume, Density, Temperature, and Time

SEVENTH EDITION and EXPANDED SEVENTH EDITION

2 Standards of Measurement

Chapter 2 - Measurements and Calculations

James Chickos Room B435. Introductory Chemistry 1111

Measurements in Chemistry Chapter 2

CHAPTER 2: MEASUREMENTS IN CHEMISTRY

Name: Class: Date: General Organic and Biological Chemistry 7th Edition Stoker SOLUTIONS MANUAL

Scientific Measurement

Chemistry 104 Chapter Two PowerPoint Notes

Matter & Measurement. Chapter 1 Chemistry 2A

MEASUREMENT CALCULATIONS AND. Chapter 2 Chemistry I

MindTrap. Read the question. Think about the question. Please Do not yell out the answer

Chapter 3 Scientific Measurement

Measurement and Chemical Calculations. Measurement and Chemical Calculations

Chapter 2a. Measurements and Calculations

The behavior and changes of matter and the related energy changes. Matter and processes of living organisms

Number vs. Quantity. Quantity - number + unit UNITS MATTER!! for a measurement to be useful, must include both a number and unit

In your textbook, read about base units and derived units. For each SI unit in Column A, write the letter of the matching item from Column B.

Welcome to General Chemistry I

INTRODUCTORY CHEMISTRY Concepts and Critical Thinking Seventh Edition by Charles H. Corwin

Chapter 2 Measurement and Problem Solving. What Is a Measurement? Scientific Notation 8/20/09. Introductory Chemistry, 3 rd Edition Nivaldo Tro

In Class Activity. Chem 107 Cypress College

CHEM 103 Measurement in Chemistry

Chapter 1 (Part 2) Measurements in Chemistry 1.6 Physical Quantities

1.5 Reporting Values from Measurements. Accuracy and Precision. 20 Chapter 1 An Introduction to Chemistry

SOLUTIONS - CHAPTER 1 Problems

Page 24 Monday August 03, 2015

PREFIXES AND SYMBOLS SI Prefixes you need to know by heart

Unit 1 Part 1: Significant Figures and Scientific Notation. Objective understand significant figures and their rules. Be able to use scientific

Study guide for AP test on TOPIC 1 Matter & Measurement

Chapter 1. Chemistry: The Study of Change. Chemistry, Raymond Chang 10th edition, 2010 McGraw-Hill

Chapter 1 Scientific Measurements

Chapter 1. Introduction: Matter and Measurement

Chapter: Measurement

Chapter 3 Scientific Measurement

CHAPTER TWO: MEASUREMENTS AND PROBLEM SOLVING

What are significant digits? Why do we need them when measuring?

Bio 105 Lab 1: Metric System, Dimensional Analysis, and Measuring

1 centimeter (cm) 5 10 millimeters (mm) 1 meter (m) centimeters. 1 kilometer (km) 5 1,000 meters. Set up equivalent ratios and cross multiply.

Scientific Measurement

Chapter 5 Measurements and Calculations Objectives

Chapter 1B. Measurement CHAPTER OUTLINE

Measurements in Chemistry Chapter 2

Table One. Mass of a small package using three different measurement methods

Chapter 2. Preview. Objectives Scientific Method Observing and Collecting Data Formulating Hypotheses Testing Hypotheses Theorizing Scientific Method

Co Curricular Data Analysis Review

1 gram = kg = 1.0 x 10 3 kg. 1 milligram (1 mg) = 1.0 x 10 3 g. 1 microgram (1µg) = 1.0 x 10 6 g

PREFIXES AND SYMBOLS SI Prefixes you need to know by heart

Metric System. An Overview of the Concepts of Mass, Volume, Length, Temperature, and Density

Chapter: Measurement

MATTER AND MEASUREMENTS

links: the world's smallest billboard at What is chemistry? A working definition

Chemistry Basic Science Concepts. Observations: are recorded using the senses. Examples: the paper is white; the air is cold; the drink is sweet.

CHM 130 Measurements, Significant Figures, Derived Quantities, and Unit Conversions

Regents Earth Science Unit 1: Observations and Measurement Observation

The Metric System & Conversions

Name Date Class MEASUREMENTS AND THEIR UNCERTAINTY

Chapter 1 Matter and Energy. Classifying Matter An Exercise. Chemical Classifications of Matter

Chem 140 Section C Instructor: Ken Marr. Chem 140 Section A Instructor: Ken Marr. Chem 140 Section E Instructor: Ken Marr. Day 1 Activities CHEMISTRY

Law vs. Theory. Steps in the Scientific Method. Outcomes Over the Long-Term. Measuring Matter in Two Ways

Section 5.1 Scientific Notation and Units Objectives

Unit I: Measurements A. Significant figures B. Rounding numbers C. Scientific notation D. Using electronic calculators E.

Scientific Measurement

Chapter 1 Introduction: Matter and Measurement

Transcription:

Chapter 2 Lecture Chapter 2 Measurements 2.1 Units of Measurement Fifth Edition Measurement You make a measurement every time you measure your height read your watch take your temperature weigh a cantaloupe Learning Goal Write the names and abbreviations for the metric or SI units used in measurements of length, volume, mass, temperature, and time. 2 Measurement in Chemistry In chemistry we measure quantities do experiments calculate results use numbers to report measurements compare results to standards Measurement A measuring tool is used to compare some dimension of an object to a standard. An electronic balance is the measuring tool used to determine the mass of a nickel. 3 4 Stating a Measurement In every measurement, a number is followed by a unit. Observe the following examples of measurements: Number Unit 35 m 0.25 L 225 lb 3.4 h The Metric System (SI) The metric system and SI (international system) are decimal systems based on 10 used everywhere by scientists used in most of the world 5 6 1

Units in the Metric System In the metric and SI systems, one unit is used for each type of measurement: Measurement Metric SI Length meter (m) meter (m) Volume liter (L) cubic meter (m 3 ) Mass gram (g) kilogram (kg) Time second (s) second (s) Temperature degree Celsius ( C) Kelvin (K) Length Measurement Length is measured using a meterstick has the unit meter (m) in both the metric and SI systems 7 8 Inches and Centimeters The unit of an inch (in.) is equal to 2.54 cm in the metric and SI systems. 1 in. = 2.54 cm Volume Measurement Volume is the space occupied by a substance has the unit liter (L) in the metric system 1 L = 1.057 qt has the unit m 3 (cubic meter) in the SI system is measured using a graduated cylinder 9 10 Mass Measurement The mass of an object is the quantity of material it contains is measured on a balance has the unit gram(g) in the metric system has the unit kilogram(kg) in the SI system Temperature Measurement The temperature indicates how hot or cold it is is measured on the Celsius ( C) scale in the metric system is measured on the Kelvin(K) scale in the SI system on this thermometer is 18 ºC or 64 ºF 11 12 2

Time Measurement Time measurement uses the unit second(s) in both the metric and SI systems is based on an atomic clock that uses a frequency emitted by cesium atoms For each of the following, indicate whether the unit describes 1) length 2) mass or 3) volume. A. B. C. D. A bag of onions has a mass of 2.6 kg. A person is 2.0 m tall. A medication contains 0.50 g of aspirin. A bottle contains 1.5 L of water. 13 14 Identify the measurement that has an SI unit. A. John s height is. 1) 1.5 yd 2) 6 ft 3) 2.1 m B. The race was won in. 1) 19.6 s 2) 14.2 min 3) 3.5 h Chapter 2 Lecture Chapter 2 Measurements 2.2 Measured Numbers and Fifth Edition C. The mass of a lemon is. 1) 12 oz 2) 0.145 kg 3) 0.6 lb D. The temperature is. 1) 85 C 2) 255 K 3) 45 F 15 Learning Goal Identify a number as measured or exact; determine the number of significant figures in a measured number. Measured Numbers A measuring tool is used to determine a quantity such as the length or the mass of an object provides numbers for a measurement called measured numbers Reading a Meterstick. l 2.... l.... l 3.... l.... l 4.. cm The markings on the meterstick at the end of the orange line are read as The first digit 2 plus the second digit 2.7 The last digit is obtained by estimating. The end of the line might be estimated between 2.7 2.8 as half-way (0.05) or a little more (0.06), which gives a reported length of 2.75 cm or 2.76 cm. 17 18 3

Known + Estimated Digits In the length reported as 2.76 cm, the digits 2 and 7 are certain (known) the final digit 6 was estimated (uncertain) all three digits (2.76) are significant including the estimated digit. l 8.... l.... l 9.... l.... l 10.. cm What is the length of the red line? 1) 9.0 cm 2) 9.03 cm 3) 9.04 cm 19 20 Zero as a Measured Number. l 3.... l.... l 4.... l.... l 5.. cm For this measurement, the first and second known digits are 4.5. Because the line ends on a mark, the estimated digit in the hundredths place is 0. This measurement is reported as 4.50 cm. in Measured Numbers Significant figures obtained from a measurement include all of the known digits plus the estimated digit. The number of significant figures reported in a measurement depends on the measuring tool. 21 22 Counting All nonzero numbers in a measured number are significant. Measurement Number of 38.15 cm 4 5.6 ft 2 65.6 lb 3 122.55 m 5 23 24 4

Sandwiched Zeros Sandwiched zeros occur between nonzero numbers are significant Measurement Number of Significant Figures 50.8 mm 3 2001 min 4 0.0702 lb 3 0.40505 m 5 Trailing Zeros Trailing zeros follow nonzero numbers in numbers without decimal points are placeholders are not significant Measurement 25 000 cm 2 200 kg 1 48 600 ml 3 25 005 000 g 5 Number of Significant Figures 25 26 Leading Zeros Leading zeros precede nonzero digits in a decimal number are placeholders are not significant Measurement Number of 0.008 mm 1 0.0156 oz 3 0.0042 lb 2 0.000262 ml 3 in Scientific Notation In scientific notation all digits including zeros in the coefficient are significant Scientific Notation Number of 8 x 10 4 m 1 8.0 x 10 4 m 2 8.00 x 10 4 m 3 27 28 State the number of significant figures in each of the following measurements: A. 0.030 m B. 4.050 L C. 0.0008 g D. 2.80 m A. Which answer(s) contain three significant figures? 1) 0.4760 2) 0.00476 3) 4.76 x 10 3 B. All the zeros are significant in 1) 0.00307 2) 25.300 3) 2.050 x 10 3 C. The number of significant figures in 5.80 x 10 2 is 1) one 3) two 3) three 29 30 5

Exact Numbers Examples of Exact Numbers An exact number is obtained when objects are counted Example: counting objects 2 baseballs 4 pizzas from numbers in a defined relationship Example: defined relationships 1 foot = 12 inches 1 meter = 100 cm 31 32 A. Exact numbers are obtained by 1. using a measuring tool 2. counting 3. definition B. Measured numbers are obtained by 1. using a measuring tool 2. counting 3. definition Classify each of the following as exact (E) or measured numbers (M). Explain your answer. A. Gold melts at 1064 C. B. 1 yd = 3 ft C. The diameter of a red blood cell is 6 x 10 4 cm. D. There are 6 hats on the shelf. E. A can of soda contains 355 ml of soda. 33 34 6