Aluminum Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request 0/0 PLL-SI VALUE 0 0 Nominal case size (Ø D x L in mm) Rated capacitance range 0 μf to (E series), 000 μf Tolerance on ± 0 % x to x 0 μf to 00 μf Rated voltage range, U () R 0 V to 00 V 00 V to 0 V Category temperature range - C to + C - C to + C Endurance test at C 000 h (0 V: 000 h) Useful life at C 000 h (0 V: 000 h) Useful life at 0 C and. x applied 0 000 h (0 V: 0 000 h) Shelf life at 0 V, C 00 h Based on sectional specification IEC 0-/EN000 Climatic category IEC 00 0/0/0 /0/ FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, minimized dimensions, cylindrical aluminum case, insulated with a blue sleeve Pressure relief on the top of the aluminum case Charge and discharge proof Long useful life: 000 h at C High ripple current capability Keyed polarity version available Material categorization: For definitions of compliance please see www.vishay.com/doc? APPLICATIONS General purpose, industrial and audio/video systems Smoothing and filtering Standard and switched mode power supplies Energy storage in pulse systems MARKING The capacitors are marked (where possible) with the following information: Rated capacitance (in μf) Tolerance code on rated capacitance, code letter in accordance with IEC 00 (M for ± 0 %) Rated voltage (in V) Date code (YYMM or in digits according to IEC 00) Name of manufacturer Code for factory of origin - sign to identify the negative terminal, visible from the top and side of the capacitor Code number Climatic category in accordance with IEC 00 SELECTION CHART FOR, U R, AND RELEVANT NOMINAL CASE SIES FOR 0 SERIES (Ø D x L in mm) U R (V) (μf) 0 0 0 00 0 - - - - - - x 0 - - - - - - x 0 000 00 00 - - - - - x x 0 - - - - - - x 0 - - - - x x 0 0 x 0 - - - - - - x 0 - - - x x 0 x 0 0 x 0 - - - - - x 0 x 0 Revision: -Apr- Document Number: 0 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?000
SELECTION CHART FOR, U R, AND RELEVANT NOMINAL CASE SIES FOR 0 SERIES (Ø D x L in mm) U R (V) (μf) 0 0 0 00 00 00 00 0 000 000 000 000 - - x x 0 x 0 0 x 0 x 0 - - - - x 0 x 0 0 x 0 - x x 0 x 0 0 x 0 0 x 0 x 0 - - - x 0 x 0 x 0 - x x 0 x 0 0 x 0 0 x 0 x 0 - - - x 0 x 0 x 0 0 x 0 - x 0 x 0 0 x 0 0 x 0 x 0 x 0 - - x 0 x 0 x 0 0 x 0 - - x 0 0 x 0 0 x 0 x 0 x 0 - - x 0 x 0 x 0 0 x 0 - - - 0 x 0 0 x 0 x 0 x 0 - - - x 0 x 0 0 x 0 - - - - 0 x 0 x 0 x 0 - - - - x 0 0 x 0 - - - - - x 0 x 0 - - - - - 000 0 x 0 - - - - - - 000 x 0 - - - - - - SELECTION CHART FOR, U R, AND RELEVANT NOMINAL CASE SIES FOR 0 SERIES (Ø D x L in mm) U R (V) (μf) 00 0 00 0 - - x x x 0 - - x 0 x 0 x 0 00 0 0 0 0 0 - x x 0 x 0 0 x 0 - - x 0 x x - - x - - x x 0 0 x 0 0 x 0 x 0 - - x 0-0 x - - - x 0 - x 0 x 0 0 x 0 x x 0 - x 0 0 x 0 x 0 0 x - - 0 x - - - - x 0 - - x 0 0 x 0 x x 0 x 0 x 0 x 0 - x 0 x 0 x 0 0 x 0 x 0 x 0 - x 0 x 0 x - - 0 x 0 x 0 - - - x 0 0 x 0 - - - x 0 x 0 - - - 000 0 x 0 - - - - 00 x 0 - - - - Revision: -Apr- Document Number: 0 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?000
DIMENSIONS in millimeters AND AVAILABLE FORMS TWO TERMINAL SNAP-IN Ø D + TERMINAL - TERMINAL L L + max. 0 ± 0. Bottom view + 0. - mm The minus terminal can be marked with a black dot or with an imprinted - sign. Ø ± 0. ( x) THREE TERMINAL SNAP-IN Fig. - Two terminal snap-in Fig. - Mounting hole diagram Ø D Ø ± 0. ( x) Ø.± 0. + TERMINAL - TERMINAL minus pole marking Bottom view L L ± max. ± 0. The negative terminal has TWO pins which are BOTH electrically connected.. ± 0.. ± 0. Fig. - Three terminal snap-in Fig. - Mounting hole diagram Table DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIE Ø D x L Ø D max. L max. MASS (g) PACKAGING QUANTITIES (units per box) 0 ± 0. The 0 mm spacing of the pin snap-in is used as the base layout and a third hole is added. The third hole is closer to the negative primary hole so that polarization is always maintained, together with added mechanical stability. CARDBOARD BOX DIMENSIONS L x W x H (mm) x 00 0 x 0 x x 0 00 0 x 0 x x 0 00 0 x 0 x x 0 00 0 x 0 x x 0 00 0 x 0 x x 00 0 x 0 x x 0 00 0 x 0 x x 0 00 0 x 0 x 0 x 0 0 00 0 x 0 x 0 x 00 0 x 0 x 0 x 0 0 00 0 x 0 x 0 x 00 0 x 0 x 0 x 0 0 00 0 x 0 x x 0 0 x x x 0 0 0 x x x 0 0 x x x 0 0 0 x x Revision: -Apr- Document Number: 0 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?000
ELECTRICAL DATA SYMBOL I L I L DESCRIPTION Rated capacitance at 00 Hz Rated RMS ripple current at 00 Hz or 0 khz and C Max. leakage current after min at U R Max. leakage current after min at U R Max. equivalent series resistance at 00 Hz Max. impedance at 0 khz Note Unless otherwise specified, all electrical values in Tables and apply at T amb = 0 C, P = kpa to 0 kpa, RH = % to % ORDERING EXAMPLE Electrolytic capacitor 0 series 0 000 μf/ V; ± 0 % Nominal case size: Ø mm x 0 mm -terminal snap-in: Ordering code: MAL 00E Former NC: 00 -terminal snap-in: Ordering code: MAL 00E Former NC: 00 Table ELECTRICAL DATA AND ORDERING INFORMATION FOR 0 SERIES U R (V) 0 00 Hz (μf) NOMINAL CASE SIE Ø D x L (mm) 00 Hz C (A) 0 khz C (A) I L min I L min 00 Hz 0 khz ORDERING CODE MAL0... -TERM. -TERM. 00 x.0.0 0 E E 0 000 x 0..0 0 0 0E 0E 000 x 0.. 0 0 E E 000 x 0..00 0 0 E E 000 0 x 0..0 E E 000 x 0.. E E 000 0 x 0..0 E E 000 x 0.0. 0 E E 000 x 0.0.0 E E 000 0 x 0.. E E 000 x 0.. 0 E E 00 x.0. E E 00 x 0..00 E E 0 000 x 0.0. 0E 0E 0 000 x 0.. 0E 0E 000 0 x 0.. E E 000 x 0.00. E E 000 0 x 0.. 0 E E 000 x 0.. 0 E E 000 x 0.0. 00 E E 000 0 x 0.. 00 E E 000 x 0..0 0 E E 00 x.. E E 00 x 0..0 0 E E 00 x 0.. 0 E E 00 x 0.. 0 E E 0 000 0 x 0.. 0 0 0 0E 0E 0 000 x 0..0 0 0 0 0E 0E 000 0 x 0.. 0 E E 000 x 0.. E E 000 x 0.. 0 0 0 E E 000 0 x 0.. 0 0 E E 000 x 0.. E E Revision: -Apr- Document Number: 0 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?000
ELECTRICAL DATA AND ORDERING INFORMATION FOR 0 SERIES U R (V) 0 0 00 00 Hz (μf) NOMINAL CASE SIE Ø D x L (mm) 00 Hz C (A) 0 khz C (A) I L min I L min 00 Hz 0 khz ORDERING CODE MAL0... -TERM. -TERM. 00 x.. 0 E E 00 x 0.0. 0 E E 00 x 0.. 0 0 E E 00 x 0.0. 0 E E 00 0 x 0.. E E 00 x 0.0. 0 E E 0 000 0 x 0.0. 0 0 0E 0E 0 000 x 0.. 0 0 0E 0E 000 x 0.0. 0 0 E E 000 0 x 0.. 0 0 E E 000 x 0.. 0 E E 00 x.. 0 0 E E 00 x 0.. 0 E E 00 x 0.. 0 E E 00 x 0.. 0 E E 00 0 x 0.. E E 00 x 0.. E E 00 0 x 0.. 0 E E 00 x 0.. 0 0 E E 0 000 x 0.0. 00 00 0E 0E 0 000 0 x 0.0. 00 00 0 0E 0E 000 x 0..0 0 0 E E 000 x.. 0 0 0E 0E 00 x 0.. 0 E E 00 x 0.. E E 00 x 0..0 E E 00 0 x 0..0 0 0 E E 00 x 0.. 0 E E 00 0 x 0.. 0 0 E E 00 x 0.. 0 E E 00 x 0.. E E 00 0 x 0..0 E E 0 000 x 0.. 0 0E 0E 0 x 0. 0. 0 E E 0 x 0 0.. 0 E E 000 x 0.. 0 0 0E 0E 000 x 0.. 0 0 0 0E 0E 00 0 x 0..0 0 0 0 0 E E 00 x 0.. 0 0 0 0 E E 00 0 x 0.. 0 0 E E 00 x 0.0.0 0 E E 00 x 0.. 00 E E 00 0 x 0.. E E 00 x 0.. 0 E E Revision: -Apr- Document Number: 0 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?000
Table ELECTRICAL DATA AND ORDERING INFORMATION FOR 0 SERIES U R (V) 00 0 00 0 00 Hz (μf) NOMINAL CASE SIE Ø D X L (mm) 00 Hz C (A) I L min I L min 00 Hz 0 khz ORDERING CODE MAL0... -TERM. -TERM. 0 x 0. 0 0 E E 0 x 0.00 0 E E 0 x 0. 00 0 0 E E 0 x 0. 00 0 0 E E 0 0 x 0.0 0 0 E E 0 x 0.0 0 0 E E 0 0 x 0. 0 0 0 E E 0 x 0. 0 0 0 E E 000 x 0. 0 0 0 0E 0E 000 0 x 0. 0 0 0 0E 0E 00 x 0. 0 0 0 0 E E 00 x 0. 0 0 0E 0E 0 x 0 0. 0 0 E E 0 x 0.0 0 E E 0 x 0.0 0 E E 0 0 x 0. 0 E E 0 x 0. 0 E E 0 0 x 0. 0 0 E E 0 x 0. 0 0 E E 0 x 0.0 0 0 E E 0 0 x 0.0 0 0 E E 000 x 0. 0 0 0 0 0E 0E x 0.0 0 000 00 E E x 0 0. 00 000 E E 00 x 0 0. 00 0 0E 0E 00 x 0 0. 00 0 0E 0E 00 x 0. 00 0 0E 0E 0 0 x 0. 0 0 0 E E 0 x 0. 0 0 0 E E 0 0 x 0. 0 00 E E 0 0 x.0 0 00 E 00E 0 x 0. 0 00 E E 0 x. 0 0 E E 0 0 x. 0 0 E E 0 x 0.0 0 0 0 E E 0 x. 0 0 0 E E x 0.0 000 00 E E x 0 0. 00 000 E E 00 x 0 0. 00 0 0E 0E 00 x 0. 0 00 0 0E 0E 0 0 x 0. 0 0 E 00E 0 x 0. 0 0 E E 0 0 x.0 0 0 00 E 00E 0 x 0. 0 0 00 E E 0 x 0. 0 0 E E 0 0 x 0. 0 0 E E 0 x 0.0 0 0 0 E E x 0 0. 00 00 E E x 0 0. 00 00 E E 00 0 x 0 0. 00 00 0E 0E 00 x 0. 00 00 0E 0E 0 0 x 0. 0 0 00 00 E E 0 x 0 0.0 0 0 00 00 E E 0 x 0 0. 0 00 00 E E 0 0 x 0. 0 00 00 E E 0 x 0. 0 00 00 E E 0 x.0 0 00 00 E E Revision: -Apr- Document Number: 0 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?000
ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage 0 V versions U s =. x U R V versions U s =. x U R Reverse voltage U rev V Current Leakage current after min at U R I L 0.00 x U R + μa after min at U R I L 0.00 x U R + μa Inductance Equivalent series inductance (ESL) all case sizes typ. nh max. nh CAPACITANCE (C) EQUIVALENT SERIES RESISTANCE (). C C 0. 0 0 Curve : U R 0 V Curve : U R = 00 V Curve : U R 00 V.0 0. 0. 0. Curve : U R = 00 V Curve : U R = 00 V Curve : U R 0 V and 0 V, C 0 = capacitance at 0 C and 00 Hz 0. - 00-0 0 0 00 T amb ( C) Fig. - Typical multiplier of capacitance as a function of ambient temperature 0 = typical at 0 C and 00 Hz - 00-0 0 0 00 0 T amb ( C) Fig. - Typical multiplier of as a function of ambient temperature C C 0..0. 0 0..0 0. 0. Curve : U R = 0 V and V Curve : U R = V, V and 0 V Curve : U R 0 V 0. Curve : U R > 00 V Curve : U R 00 V C 0 = capacitance at 0 C and 00 Hz 0. 0 0 0 0 Fig. - Typical multiplier of capacitance as a function of frequency 0 = typical at 0 C and 00 Hz 0 0 0 0 0 Fig. - Typical multiplier of as a function of frequency Revision: -Apr- Document Number: 0 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?000
IMPEDANCE () 0 0 Curve : U R 0 V Curve : U R = 00 V Curve : U R 00 V 0 0 Curve : µf Curve : 00 µf Curve : 0 µf Curve : 0 µf Curve : 0 µf Curve : 000 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve 0: 00 µf Curve : 00 µf 0 0, 0 0 = typical impedance at 0 C and 0 khz - 00-0 0 0 00 0 T amb ( C) Fig. 0 - Typical multiplier of impedance as a function of ambient temperature Case Ø D x L = mm x mm T amb = 0 C 0 0 0 0 0 0 0 0 Fig. - Typical impedance as a function of frequency 0 0 0 0 0 Curve : µf Curve : 0 µf Curve : 0 µf Curve : 0 µf Curve : 0 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve 0: 00 µf Curve : 0 000 µf 0 0 0 0 0 Curve : 00 µf Curve : 0 µf Curve : 0 µf Curve : 0 µf Curve : 000 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve 0: 0 000 µf Curve : 000 µf T amb = 0 C Case Ø D x L = mm x 0 mm T amb = 0 C 0 0 0 0 0 0 0 0 Fig. - Typical impedance as a function of frequency Case Ø D x L = mm x 0 mm and mm x 0 mm 0 0 0 0 0 0 0 0 Fig. - Typical impedance as a function of frequency 0 0 0 0 0 Curve : 0 µf Curve : 0 µf Curve : 0 µf Curve : 0 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve : 0 000 µf Curve 0: 000 µf Curve : 000 µf T amb = 0 C 0 0 0 0 0 Curve : 0 µf Curve : 0 µf Curve : 0 µf Curve : 000 µf Curve : 00 µf Curve : 00 µf Case Ø D x L = 0 mm x 0 mm and mm x 0 mm Curve : 00 µf Curve : 0 000 µf Curve : 000 µf Curve 0: 000 µf Curve : 000 µf Case Ø D x L = 0 mm x 0 mm and mm x 0 mm 0 0 0 0 0 0 0 0 Fig. - Typical impedance as a function of frequency T amb = 0 C 0 0 0 0 0 0 0 0 Fig. - Typical impedance as a function of frequency Revision: -Apr- Document Number: 0 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?000
IMPEDANCE () 0 0 0 0 0 Curve : 0 µf Curve : 0 µf Curve : 000 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Case Ø D x L = mm x 0 mm and 0 mm x 0 mm Curve : 0 000 µf Curve : 000 µf Curve : 000 µf Curve 0: 000 µf Curve : 000 µf T amb = 0 C 0 0 0 0 0 0 0 0 Fig. - Typical impedance as a function of frequency Fig. - Typical impedance as a function of frequency RIPPLE CURRENT AND USEFUL LIFE 0 0 0 Curve : 0 µf Curve : 000 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve : 0 000 µf Curve : 000 µf Curve : 000 µf Curve : 000 µf Curve 0: 000 µf Curve : 000 µf Case Ø D x L = mm x 0 mm 0 0 T amb = 0 C 0 0 0 0 0 0 0 0. MGA I A....0........ 0... Life multiplier I A = actual ripple current at 00 Hz and C = rated ripple current at 00 Hz and C () Useful life at C and applied: 000 h (0 V types: 000 h). ().0 0. 0. 0.0 0 0 0 0 0 T amb ( C) 0 0 0 0 Fig. - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: -Apr- Document Number: 0 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?000
Table MULTIPLIER OF RIPPLE CURRENT ( ) AS A FUNCTION OF FREQUENCY FREQUENCY MULTIPLIER (Hz) U R = 0 V to V U R = 0 V to 00 V U R > 00 V 0 0. 0. 0. 00.00.00.00 00.0.0. 00.0.0. 000... 000... 000... 0 000...0 Table TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance Useful life Shelf life (storage at high temperature) REFERENCE IEC 0-/ EN000 subclause. CECC 00 subclause.. IEC 0-/ EN000 subclause. PROCEDURE (quick reference) T amb = C; U R applied; 000 h (0 V types: 000 h) T amb = C; U R and applied; 000 h (0 V types: 000 h) T amb = C; no voltage applied; 00 h after test: U R to be applied for 0 min, h to h before measurement REQUIREMENTS U R 00 V; C/C: ± % U R > 00 V; C/C: ± 0 %. x spec. limit x spec. limit I L spec. limit U R 00 V; C/C: ± % U R > 00 V; C/C: ± 0 % x spec. limit x spec. limit I L spec. limit no short or open circuit, no visible damage total failure percentage: U R 00 V; % U R 00 V; % C/C: ± 0 %. x spec. limit I L x spec. limit Revision: -Apr- 0 Document Number: 0 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?000
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 0//EU of The European Parliament and of the Council of June, 0 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 00//EC. We confirm that all the products identified as being compliant to Directive 00//EC conform to Directive 0//EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS0A standards. Please note that some Vishay documentation may still make reference to the IEC -- definition. We confirm that all the products identified as being compliant to IEC -- conform to JEDEC JS0A standards. Revision: 0-Oct- Document Number: 000