Solution Concentration solution: homogeneous mixture of substances present as atoms, ions, and/or molecules solute: component present in smaller amount solvent: component present in greater amount Note: Unless otherwise stated, the solvent for most solutions considered in this class will almost always be water! Aqueous solutions are solutions in which water is the solvent.
How do we measure concentration? A concentrated solution has a large quantity of solute present for a given amount of solution. A dilute solution has a small quantity of solute present for a given amount of solution. amount of solute SOLUTION CONCENTRATION = amount of solvent The more solute in a given amount of solution the more concentrated the solution Example: Explain the difference between the density of pure ethanol and the concentration of an ethanol solution.
How do we measure Concentration can be measured a number of ways: ppm (parts per million) one part in a million parts ppb (parts per billion) one part in a billion parts g/kg (grams per kilogram) one gram solute per one kilogram of solvent The chemical standard most used is Molarity Molarity = concentration? moles of solute liters of solution units: M (molar = mol/l)
Ion Concentrations When an ionic compound is dissolved in water, the concentration on the individual ions is based on their molecular formula For example: 1 M NaCl solution contains 1 M Na + and 1 M Cl - 2 M NaCl solution contains 2 M Na + and 2 M Cl - 1 M CaCl 2 solutions contains 1 M Ca 2+ and 2 M Cl - 2 M CaCl 2 solutions contains 2 M Ca 2+ and 4 M Cl -
Solving Concentration Problems Keep in mind that if molarity and volume are both given, you can calculate # of moles since: volume molarity = volume (in L) moles of solute liters of solution so volume units will cancel # of moles! If you are given volume and molarity for a solution, multiply them together to get # of moles!
Preparing Solutions
Dilutions More concentrated standard solutions (with accurately known concentrations) are often diluted with deionized water to get a solution with a specific concentration
Dilutions Dilutions are carried out this way: A determined volume of a more concentrated solution is measured out in a small flask. The more concentrated solution is then transferred to a larger empty volumetric flask. The solution is diluted with deionized water to obtain the calibrated volume of the flask. Dilution Equation: M 1 V 1 = M 2 V 2
M 1 V 1 = M 2 V 2 M 1 =initial molarity, V 1 =initial volume M 2 =final molarity, V 2 =final volume The dilution equation is used to determine the new molarity of the dilute solution (M 2 ) given the molarity of the more concentrated solution (M 1 ) or the volume of the more concentrated solution to use (V 1 ) given the new total volume of the dilute solution (V 2 ) required.
Dilution Example Calculate the molarity of a hydrochloric acid solution prepared by diluting 15.0 ml of 6.00M hydrochloric acid to give a total volume of 100.0 ml. M 1 = 6.00 M M 2 =? V 1 = 15.0 ml V 2 = 100.0 ml M 1 V 1 = M 2 V 2 M 2 = M 1 V 1 /V 2 M 2 = (6.00 M)*(15.0 ml)/100 ml = 0.900 M
Solution Stoichiometry One important property of oxalic acid, H 2 C 2 O 4 (aq), is its ability to remove rust, Fe 2 O 3, as shown in the following equation: Fe 2 O 3 (s)+6 H 2 C 2 O 4 (aq) 2 Fe(C 2 O 4 ) 3 3 (aq) + 3 H 2 O(l)+6 H + (aq) What volume of a 0.500M oxalic acid solution is required to remove 25.0 g of rust? MW of Fe 2 O 3 = 159.69 g/mol 25.0 g of Fe 2 O 3 = 0.157 mol Need 6 mol of oxalic acid for 1 mol of Fe 2 O 3 0.0157 mol Fe 2 O 3 *6 = 0.939 mol oxalic acid 0.939 mol/0.500 M = 1.88 L oxalic acid solution
Definitions: Acid-Base Titrations standard solution: an acid or base solution where the concentration is known, generally to at least 3 or more sig figs used to analyze properties of substances, such as the neutralizing power of commercial antacids, the tartness of wine, etc. acid-base indicators: Solutions that are ph sensitive and change color Generally have color changes occurring for ph close to 7 since reactions monitored are neutralization reactions which occur near ph=7
Acid-Base Indicators
Acid-Base Titrations Definitions (cont d) titration: The gradual addition of a solution from a buret to another solution in a flask or beaker until the reaction between the two is complete, as signaled by the indicator changing color. titrant: the solution in the buret
Acid-Base Titrations Definitions (cont d) analyte: the solution for which a property (e.g. molar concentration) is being determined In some titrations, the titrant is also the analyte, in which case a known amount of acid or base is present in the flask, and the amount of titrant necessary to neutralize it will be used to determine the concentration of the titrant. In other titrations, the titrant s concentration is known, and the amount of titrant used to neutralize it will determine the concentration of the solution in the flask.
Definitions (cont d) Acid-Base Titrations equivalence point: Theoretical point in the titration when the amount of base added is exactly equal to the acid present, so the base completely neutralizes the acid. endpoint: The moment when the acid-base indicator changes color. Note: in most acid-base titrations, the phenolphthalein indicator does not change color until the solution is basic, so in reality, there is a slight excess of hydroxide ion present in the solution when it turns pink. Ideally, the endpoint is reached with one drop or a fraction of a drop of titrant, so the endpoint is very close to the equivalence point.
Endpoint