Test Report No. : KA/2010/C2116 Date : 2011/01/05 Page : 1 of 6 The following sample(s) was/were submitted and identified by/on behalf of the client as : Sample Description : Color : Sample Receiving Date : Testing Period : UL DEV-300 DEV-600 VW-1 PVC 105 E152386 DEVELOP LR77177 CAS 105 NHS VW-1 PVC DEV-300DEV-600 BLACK 2010/12/30 2010/12/30 TO 2011/01/05 =================================================================================== Test Requested : Test Method : Test Result(s) : In accordance with the RoHS Directive 2002/95/EC, and its amendment directives. With reference to IEC 62321: 2008 Procedures for the Determination of Levels of Regulated Substances in Electrotechnical Products. (1) (2) (3) (4) (5) Determination of Cadmium by ICP-AES. Determination of Lead by ICP-AES. Determination of Mercury by ICP-AES. Determination of Hexavalent Chromium by UV/Vis Spectrometry. Determination of PBB and PBDE by GC/MS. Please refer to next page(s).
Test Report No. : KA/2010/C2116 Date : 2011/01/05 Page : 2 of 6 Test results by chemical method (Unit: mg/kg) Cadmium (Cd) Lead (Pb) Mercury (Hg) Hexavalent Chromium Cr(VI) by alkaline extraction Sum of PBBs Monobromobiphenyl Dibromobiphenyl Tribromobiphenyl Tetrabromobiphenyl Pentabromobiphenyl Hexabromobiphenyl Heptabromobiphenyl Octabromobiphenyl Nonabromobiphenyl Decabromobiphenyl Test Item (s): Sum of PBDEs Monobromodiphenyl ether Dibromodiphenyl ether Tribromodiphenyl ether Tetrabromodiphenyl ether Pentabromodiphenyl ether Hexabromodiphenyl ether Heptabromodiphenyl ether Octabromodiphenyl ether Nonabromodiphenyl ether Decabromodiphenyl ether Method (Refer to) (1) (2) (3) (4) (5) Result No.1 MDL n.d. - n.d. - TEST PART DESCRIPTION: NO.1 : BLACK UL DEV-300 DEV-600 VW-1 PVC 105 E152386 DEVELOP LR77177 CA
Test Report No. : KA/2010/C2116 Date : 2011/01/05 Page : 3 of 6 Note: 1. mg/kg = ppm;0.1wt% = 1000ppm 2. n.d. = Not Detected 3. MDL = Method Detection Limit 4. "-" = Not Regulated 7. This report supersedes all pervious documents bearing the test report number KA/200X/XXXXX. 8. This is the additional test report of KA/200X/XXXXX which was issued on yyyy/mm/dd. Please refer to KA/200X/XXXXX for original information.
Test Report No. : KA/2010/C2116 Date : 2011/01/05 Page : 4 of 6 1) These samples were dissolved totally by pre-conditioning method according to below flow chart. (Cr6+ test method excluded) 2) Name of the person who made measurement: Alex Chang 3) Name of the person in charge of measurement: Ray Chang Cutting / Preparation Sample Measurement Pb Cd Hg Cr 6+ Acid digestion by suitable acid depended on different sample material (as below table) Microwave digestion with HNO 3 /HCl/HF Add appropriate amount of digestion reagent Filtration Heat to appropriate temperature to extract Solution Residue Cool, filter digestate through filter ICP-AES 1) Alkali Fusion 2) HCl to dissolve Add diphenyl-carbazide for color development Sample Material Digestion Acid Steel, copper, aluminum, solder Aqua regia, HNO 3, HCl, HF, H 2O 2 Measure the absorbance at 540 nm by UV-VIS Glass Gold, platinum, palladium, ceramic HNO 3/HF Aqua regia Silver HNO 3 Plastic Others H 2SO 4, H 2O 2, HNO 3, HCl Any acid to total digestion
Test Report No. : KA/2010/C2116 Date : 2011/01/05 Page : 5 of 6 PBB/PBDE analytical FLOW CHART 1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang First testing process Optional screen process Confirmation process Sample Sample pretreatment Screen analysis Sample extraction/ Soxhlet method Concentrate/Dilute Extracted solution Filter Analysis by GC/MS Issue Report
Test Report No. : KA/2010/C2116 Date : 2011/01/05 Page : 6 of 6 ** End of Report **