Management Level- Summary of Academic Syllabus Changes

Similar documents
Rate of Flow Quantity of fluid passing through any section (area) per unit time

Lecture 3 The energy equation

BACHELOR OF TECHNOLOGY IN MECHANICAL ENGINEERING (COMPUTER INTEGRATED MANUFACTURING)

CHIEF ENGINEER REG III/2 APPLIED MECHANICS

Chapter 4 DYNAMICS OF FLUID FLOW

If a stream of uniform velocity flows into a blunt body, the stream lines take a pattern similar to this: Streamlines around a blunt body

Experiment (4): Flow measurement

LECTURE 6- ENERGY LOSSES IN HYDRAULIC SYSTEMS SELF EVALUATION QUESTIONS AND ANSWERS

Hydraulics and hydrology

B.E/B.Tech/M.E/M.Tech : Chemical Engineering Regulation: 2016 PG Specialisation : NA Sub. Code / Sub. Name : CH16304 FLUID MECHANICS Unit : I

COURSE CODE : 3072 COURSE CATEGORY : B PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE

CH.1 Overview of Fluid Mechanics/22 MARKS. 1.1 Fluid Fundamentals.

vector H. If O is the point about which moments are desired, the angular moment about O is given:

University of Engineering and Technology, Taxila. Department of Civil Engineering

Steven Burian Civil & Environmental Engineering September 25, 2013

s and FE X. A. Flow measurement B. properties C. statics D. impulse, and momentum equations E. Pipe and other internal flow 7% of FE Morning Session I

ESSEX COUNTY COLLEGE Engineering Technologies and Computer Sciences Division MET 215 Fluid Mechanics Course Outline

Discharge measurements

V/ t = 0 p/ t = 0 ρ/ t = 0. V/ s = 0 p/ s = 0 ρ/ s = 0

FLUID MECHANICS WITH ENGINEERING APPLICATIONS

Basic Fluid Mechanics

New Website: Mr. Peterson s Address:

SSC JE MECHANICAL Paper Pattern & Syllabus

REE 307 Fluid Mechanics II. Lecture 1. Sep 27, Dr./ Ahmed Mohamed Nagib Elmekawy. Zewail City for Science and Technology

SCHOOL OF CHEMICAL ENGINEERING FACULTY OF ENGINEERING AND TECHNOLOGY SRM UNIVERSITY COURSE PLAN

MAHATMA GANDHI MISSION S JAWAHARLAL NEHRU ENGINEERING COLLEGE, AURANGABAD. (M.S.)

ME3560 Tentative Schedule Spring 2019

Sourabh V. Apte. 308 Rogers Hall

SECOND ENGINEER REG. III/2 APPLIED MECHANICS

Chapter Four fluid flow mass, energy, Bernoulli and momentum

Flow Measurement in Pipes and Ducts COURSE CONTENT

Objectives. Conservation of mass principle: Mass Equation The Bernoulli equation Conservation of energy principle: Energy equation

Experiment No.4: Flow through Venturi meter. Background and Theory

ME3560 Tentative Schedule Fall 2018

Fluid Mechanics Prof. S.K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur

Approximate physical properties of selected fluids All properties are given at pressure kn/m 2 and temperature 15 C.

ENGR 292 Fluids and Thermodynamics

Experiment- To determine the coefficient of impact for vanes. Experiment To determine the coefficient of discharge of an orifice meter.

CEE 3310 Control Volume Analysis, Oct. 7, D Steady State Head Form of the Energy Equation P. P 2g + z h f + h p h s.

3.25 Pressure form of Bernoulli Equation

Angular momentum equation

Hydraulic Fundamentals Hydraulics Definition Advent of Oil Hydraulics Pascal s Law Pressure

An-Najah National University Civil Engineering Department. Fluid Mechanics. Chapter 1. General Introduction

EXPERIMENT No.1 FLOW MEASUREMENT BY ORIFICEMETER

Exam #2: Fluid Kinematics and Conservation Laws April 13, 2016, 7:00 p.m. 8:40 p.m. in CE 118

Laboratory work No 2: Calibration of Orifice Flow Meter

MECHANICAL ENGINEERING (ME)

CEE 3310 Control Volume Analysis, Oct. 10, = dt. sys

405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Data Book and Flow Handbook

ENGINEERING FLUID MECHANICS. CHAPTER 1 Properties of Fluids

Hydraulic modeling assessment Copyright 2010, Optimized Technical Solutions, LLC

Predictionof discharge coefficient of Venturimeter at low Reynolds numbers by analytical and CFD Method

405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Data Book and Flow Handbook

For example an empty bucket weighs 2.0kg. After 7 seconds of collecting water the bucket weighs 8.0kg, then:

405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Data Book and Flow Handbook

DEPARTMENT OF CHEMICAL ENGINEERING University of Engineering & Technology, Lahore. Fluid Mechanics Lab

5 ENERGY EQUATION OF FLUID MOTION

Introduction to Fluid Machines and Compressible Flow Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur

Chapter (6) Energy Equation and Its Applications

SYLLABUS FORM WESTCHESTER COMMUNITY COLLEGE Valhalla, NY lo595. l. Course #: PHYSC NAME OF ORIGINATOR /REVISOR: ALENA O CONNOR

Introduction. Simple Viscometer

Lesson 6 Review of fundamentals: Fluid flow

: ME0232 : Thermodynamics and Fluid Mechanics :4 : Even (November May 2014)

Mass of fluid leaving per unit time

DETERMINATION OF DISCHARGE AND HEAD LOSS USING A FLOW-MEASURING APPARATUS

VENTURIMETER EXPERIMENT

POE Concepts and Learning Objectives

COURSE NAME : BE - MARINE ENGINEERING SEMESTER : I Sl. SUB SUBJECT TITLE C L T P M 1 UCLEC01 TECHNICAL ENGLISH-I

MAHATMA GANDHI MISSION S JAWAHARLAL NEHRU ENGINEERING COLLEGE, FLUID MECHANICS LABORATORY MANUAL

Theory and Fundamental of Fluid Mechanics

FLUID MECHANICS. Chapter 3 Elementary Fluid Dynamics - The Bernoulli Equation

Department of Mechanical Engineering

Mechanical Engineering Science for Medical Engineers Level: 4 Credit value: 8 GLH: 62 TQT: 80

Administrative-Master Syllabus form approved June/2006 revised Page 1 of 1

Chapter 3 Bernoulli Equation

UNIVERSITY POLYTECHNIC B.I.T., MESRA, RANCHI

BRCM COLLEGE OF ENGINEERING & TECHNOLOGY Practical Experiment Instructions Sheet

CHAPTER THREE FLUID MECHANICS

Experimental and Numerical Investigation of Two- Phase Flow through Enlarging Singularity

MCT-331: MODELING AND SIMULATION 4(3,1)

FLUID FLOW FOR THE PRACTICING CHEMICAL ENGINEER

When fluid incompressible...flow velocity, volumetric, and mass flow are proportional.

Principles Of Engineering Detailed Outline

A Model Answer for. Problem Set #7

nozzle which is fitted to a pipe through which the liquid is flowing under pressure.

PROPERTIES OF FLUIDS

Lecture 2 Flow classifications and continuity

Applied Fluid Mechanics

Pre-requisites: Concepts of Engineering mechanics, basic physics, Newton s Laws

Applied Fluid Mechanics

UNIVERSITY OF BOLTON SCHOOL OF ENGINEERING BENG (HONS) ELECTRICAL & ELECTRONICS ENGINEERING EXAMINATION SEMESTER /2018

FE Exam Fluids Review October 23, Important Concepts

AE302,ME302,DAE14,DME14

Soil Mechanics Objective Type Question Answers Pdf

FLOW MEASUREMENT IN PIPES EXPERIMENT

INSTITUTE OF AERONAUTICAL ENGINERING DUNDIGAL ELECTRICAL AND ELECTRONICS ENGINEERING

Chemical Engineering 3P04 Process Control Tutorial # 1 Learning goals

GATE 2018 Online Test Series - Mechanincal Engineering. Numerical Methods,Vector Calculus,Complex Engineering Mathematics-III Analysis

CALCULATION OF COEFFICIENT OF DISCHARGE OF ORIFICE PLATE AND FLOW NOZZLE

Detailed Outline, M E 320 Fluid Flow, Spring Semester 2015

Transcription:

Management Level- Summary of Academic Syllabus Changes Dhruva Kumar Faculty of Nautical Studies 24 January 2017 2017 City of Glasgow College Charity Number: SCO 36198

Overview Applied Mechanics (040-31)... 3 Attachment 1-Management Level Applied Mechanics Syllabus... 3 Applied Heat (040-32)... 4 Attachment 2-Mangement Level Applied Heat Syllabus... 4 Electro-Technology (040-33)... 5 Attachment 3-Mangement Level Electro-Technology Syllabus... 5 Naval Architecture (040-34)... 5 Attachment 4-Mangement Level Electro-Technology Syllabus... 5 Mathematics (040-35)... 6 Attachment 5-Mangement Level Mathematics Syllabus... 6 Engineering, Systems and Ship Drawing (040-36)... 6 Attachment 6-Mangement Level Eng Systems and Ship Drg Syllabus... 6 2017 City of Glasgow College 2

Applied Mechanics (040-31) Syllabus changes in the Applied Mechanics (040-31) at the Mangement Level (III/2) from Jan 2017 as compared with previous Chief Engineer Level Applied Mechanics (041-31): The following titles are moved/removed from the old syllabus: 1- Vector representation (removed) 8- Hydrostatics (moved to naval architecture) 9- Hydrodynamics (moved to applied heat) 10- Mathematical solutions of control system problems (removed) Section B- Statics- Expanded to include 2 nd Engineer syllabus of this unit Section C- Friction: A little of 2 nd Engineer syllabus included Section D- Kinematics: Double Projectiles dropped Section E- Dynamics: clutches formulae still given, Section F: Machines: All new from second Syllabus Section G: SoM expanded to include 2 nd Engineer syllabus Double click on the pdf document attached below: Acrobat Document Attachment 1-Management Level Applied Mechanics Syllabus 2017 City of Glasgow College 3

Applied Heat (040-32) Entire new topic Hydrodynamics added. Please see the attachecd Topics added to Heat Engine Cycles: Two state & Multi stage compressor, Reheat and Optional heat exchanger (recuperator) Explain the concepts of energy related to the steady flow motion of liquids. Explain the volumetric and mass flow rates of liquids and state the continuity equation. Explain the concept of coefficient of velocity (CV), coefficient of contraction (CC), and coefficient of discharge (Cd) for a sharp edged orifice. Identify the various forms of energy possessed by a liquid in motion and state the expression for these in terms of energy and equivalent head. Apply the principle of the conservation of energy and the Bernoulli expression. Explain the effect of friction related to flow problems and how this is included with the Bernoulli statement. Apply the above to a venturi meter. For more details refer to attached documents Double click on the pdf document attached below: Acrobat Document Attachment 2-Mangement Level Applied Heat Syllabus 2017 City of Glasgow College 4

Electro-Technology (040-33) Kirchhoff s laws reduced to two unknowns Non-linear circuits removed Single phase circuits seem to be limited to transformers only Load line calculations for amplifier circuits seem to have disappeared For more details Double click on the pdf document attached below: Acrobat Document Attachment 3-Mangement Level Electro-Technology Syllabus Naval Architecture (040-34) New material added are the topics of Hydrostatics (from Mechanics), Grounding & Docking. There will be far fewer descriptive questions eg. Sections (H K) are not included in the new syllabus:- H Ship Stresses I Ship Construction J Classification, Structural Fire Protection, Life-Saving Appliances and Pollution Control K Vibration and Noise For more details Double click on the pdf document attached below: Adobe Acrobat Document Attachment 4-Mangement Level Electro-Technology Syllabus 2017 City of Glasgow College 5

Mathematics (040-35) The new 2nd Mathematics examination includes Complex numbers, Binary, Hexadecimal Number system and Logic. Arithmetic and Mensuration have been omitted. For more details Double click on the pdf document attached below: Adobe Acrobat Document Attachment 5-Mangement Level Mathematics Syllabus Engineering, Systems and Ship Drawing (040-36) Old syllabus of Engineering Drawing (042-24) is entirely changed to this Management Level Engineering, Systems and Ship Drawing (040-36), which have five subject areas: Mechanical Assembly Drawings Piping Systems Drawings Hydraulic & Pneumatic Systems Drawings Electrical Systems Drawings Ships Construction Drawings Adobe Acrobat Document Attachment 6-Mangement Level Eng Systems and Ship Drg Syllabus 2017 City of Glasgow College 6