Test Report No. KD/2013/50027A-01 Date 2013/07/01 Page 1 of 6 The following sample(s) was/were submitted and identified by/on behalf of the client as Sample Description Style/Item No. Sample Receiving Date Testing Period Sample Submitted By CN/SD SERIES CN, SD GRADES 2013/05/16 2013/05/16 TO 2013/05/22 ======================================================================================== Test Requested Test Result(s) As specified by client, with reference to RoHS Directive 2011/65/EU Annex II to determine Cadmium, Lead, Mercury, Cr(VI), PPBs,PBDEs contents in the submitted Please refer to next page(s). This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http//www.sgs.com/terms_and_conditions.htm.
Test Report No. KD/2013/50027A-01 Date 2013/07/01 Page 2 of 6 Test Result(s) PART NAME No.1 PART NAME No.2 PART NAME No.3 Cadmium (Cd) Lead (Pb) Mercury (Hg) Test Item(s) Hexavalent Chromium Cr(VI) Sum of PBBs Monobromobiphenyl Dibromobiphenyl Tribromobiphenyl Tetrabromobiphenyl Pentabromobiphenyl Hexabromobiphenyl Heptabromobiphenyl Octabromobiphenyl Nonabromobiphenyl Decabromobiphenyl Sum of PBDEs Monobromodiphenyl ether Dibromodiphenyl ether Tribromodiphenyl ether Tetrabromodiphenyl ether Pentabromodiphenyl ether Hexabromodiphenyl ether Heptabromodiphenyl ether Octabromodiphenyl ether Nonabromodiphenyl ether Decabromodiphenyl ether BLACK FOAM (LD30SD) BLACK FOAM (LD32CN) BLACK FOAM (EV45CN) Unit Method mg/kg With reference to IEC 62321 2008 and performed by ICP-AES. mg/kg With reference to IEC 62321 2008 and performed by ICP-AES. mg/kg With reference to IEC 62321 2008 and performed by ICP-AES. mg/kg With reference to IEC 62321 2008 and performed by UV-VIS. Result MDL No.1 No.2 No.3 mg/kg - n.d. n.d. n.d. mg/kg With reference to IEC 62321 2008 5 n.d. n.d. n.d. mg/kg and performed by GC/MS. - n.d. n.d. n.d. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http//www.sgs.com/terms_and_conditions.htm.
Test Report No. KD/2013/50027A-01 Date 2013/07/01 Page 3 of 6 Note 1. mg/kg = ppm;0.1wt% = 1000ppm 2. n.d. = Not Detected 3. MDL = Method Detection Limit 4. " - " = Not Regulated 5. This is the additional test report of KD/2013/50027 which was issued on 2013/05/22. Please refer to KD/2013/50027 for original information. 5. This report supersedes all previous documents bearing the test report number KA/201X/XXXXX. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http//www.sgs.com/terms_and_conditions.htm.
Test Report No. KD/2013/50027A-01 Date 2013/07/01 Page 4 of 6 1) These samples were dissolved totally by pre-conditioning method according to below flow chart. (Cr6+ test method excluded) 2) Name of the person who made measurement Alex Chang 3) Name of the person in charge of measurement Ray Chang Cutting / Preparation Sample Measurement Pb Cd Hg Cr 6+ Acid digestion by suitable acid depended on different sample material (as below table) Microwave digestion with HNO 3 /HCl/HF Add appropriate amount of digestion reagent Filtration Heat to appropriate temperature to extract Solution Residue Cool, filter digestate through filter ICP-AES 1) Alkali Fusion 2) HCl to dissolve Add diphenyl-carbazide for color development Sample Material Digestion Acid Steel, copper, aluminum, solder Aqua regia, HNO 3, HCl, HF, H 2O 2 Measure the absorbance at 540 nm by UV-VIS Glass Gold, platinum, palladium, ceramic HNO 3/HF Aqua regia Silver HNO 3 Plastic Others H 2SO 4, H 2O 2, HNO 3, HCl Any acid to total digestion Note**(1) For non-metallic material, add alkaline digestion reagent and heat to 90~95. (2) For metallic material, add pure water and heat to boiling. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http//www.sgs.com/terms_and_conditions.htm.
Test Report No. KD/2013/50027A-01 Date 2013/07/01 Page 5 of 6 PBB/PBDE analytical FLOW CHART 1) Name of the person who made measurement Anson Tsao 2) Name of the person in charge of measurement Ray Chang First testing process Optional screen process Confirmation process Sample Sample pretreatment Screen analysis Sample extraction/ Soxhlet method Concentrate/Dilute Extracted solution Filter Analysis by GC/MS Issue Report This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http//www.sgs.com/terms_and_conditions.htm.
Test Report No. KD/2013/50027A-01 Date 2013/07/01 Page 6 of 6 * The tested sample / part is marked by an arrow if it's shown on the photo. * ** End of Report ** This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http//www.sgs.com/terms_and_conditions.htm.