0/08 MINIATURE MICROSWITCHES - PREMIUM V - 86 High precision flexible leaf snap-action mechanism Operation without balance-point, even at extremely slow actuating speed Broad range of operating forces from 0. N to N Ratings from A to 0(8) A 0 Va, 0() A 00 Va and / hp -0 Va Contact gap less or greater than mm (micro-disconnection (µ) or full disconnection) Operating temperature from -60 C up to +0 C - High resistance to shock and vibration Mechanical life up to 0 million cycles ENEC and curus approved Wide choice of actuators on possible fixing positions (pre-assembled or retrofittable) Main specifications Standard 86 High current 86 Standard UL Standard UL UL SP86 Function Connections I (changeover) W (solder) 860 868 867 I (changeover) W (QC 6.x0.8) 868 86 86 86 I (changeover) W6A (QC.8x0.) 860 86 * * - I (changeover) WR (QC 6.x0.8, Rast ) 860 8607 * * * I (changeover) W (screw + clamp) 860 869 * * - I (changeover) W6D8 (QC.8x0.8) 860 86 * * - I (changeover) W7A (QC.8x0.) 8609 860 - - - I (changeover) W7A8 (QC.8x0.8, double) 860 * * - R (normally closed) W (solder) 866 860 867 R (normally closed) W (QC 6.x0.8) 86 86066 R (normally closed) W6A (QC.8x0.) 869 * * - R (normally closed) WR - W - W6D8 - W7A - W7A8 * * * C (normally open) W (solder) 86 C (normally open) W (QC 6.x0.8) 86 866 C (normally open) W6A (QC.8x0.) 86 * * - C (normally open) WR - W - W6D8 - W7A - W7A8 * * * Electrical characteristics Rating nominal / 0 V AC (A) 6 0 Rating thermal / 0 V AC (A) 0 Rating ENEC/NF / 0 V AC (A) 6() 6() 0(8) 0(8) 0(8) Rating UL / /0 V AC (A) - 6 - /hp -. - /hp 0. - /hp Mechanical characteristics Maximum operating force (N) 0.8 ** Min. Release force (N) 0. 0. Maximum total travel force (N). Max. Allowable overtravel force (N) 0 0 Maximum rest position (mm) 6. 6. Operating position (mm).7 ±0..7 ±0. Maximum differential travel (mm) 0. 0. Min. overtravel (mm).. Ambient operating temperature ( C) -60 + -60 + Mechanical life for / OT (operations) x 0 7. x 0 Contact gap (mm) 0. 0. Weight (g).6.6 * Please consult us ** Also available with N operating force (86 SP6) Additional specifications - Case: PA6 GF (UL 9-V / GWFI 960 C) - Standard versions PBT GF (UL 9-V0 / GWFI 960 C) - UL versions PET GF (UL 9-V0 / GWFI 960 C / GWIT 77 C) - On request - Button: PA66 - Moving blade: silver-plated beryllium copper - Contacts: silver alloy, micro-profile (86: silver cadmium oxyde) - Terminals: brass (except W : copper nickel) - Levers: stainless steel or polyamide, polyamide roller - Nuts for 6L: nickel-plated brass - Degree of protection: IP0 (mechanism) - Proof tracking index: PTI 0 - Protection against electric shock: button and 6-type actuators have reinforced insulation for Ui 0V / Uimp,kV / pollution - Recommended min actuating speed: 0.00 mm/s - Certification marks: Standard versions: UL versions: Standard product Product made to order Contact us
0/08 Main specifications (continued) High force 86 Low force 86 Very low force 86 Ultra low force 86 SP6 Wide contact gap 866 Standard UL Standard UL Standard UL Standard UL Standard UL Func. Conn. 860 8608 860 86 860 860 8660 I W 868 866 860 860 86 869 867 8660 8666 I W 860 868 860 8607 860 8608 8677 * * I W6A 866 868 867 8669 I WR 86 860 8608 8609 86 8660 I W 86 869 8607 I W6D8 8689 860 * * I W7A 8609 * * I W7A8 867 869 86609 R W 8609 868 8660 R W 86070 86 * * R W6A * * R Others 860 8608 86 8689 C W 860 8688 860 86 86606 C W 86 86 860 * * C W6A * * C Others Electrical 6 0 Nom rating (A) 0 Therm rating (A) 6() 6() 0() 0() () () () () () () ENEC rating (A) - 6 - /hp - 6 - /hp - - /0hp - - /0hp - 6. - /hp UL rating (A) Mechanical 0. 0. 0. OF max (N) 0. 0.0 0.0 0. RF min (N).. 0.0 0. 6 TTF max (N) 0 0 0 0 0 AOF max (N) 6. 6. 6. 6. 6. RP max (mm).7 ±0..7 ±0..7 ±0..7 ±0.. ±0. OP (mm) 0. 0. 0. 0. 0.8 DT max (mm).... 0.9 OT min (mm) -60 + -60 + -0 + -0 + -60 + Temp ( C) 0 7 x 0 7 x 0 7 x 0 7 x 0 Mech. life (op) 0. 0. 0. 0.. Gap (mm).6.6.6.6.6 Weight (g) Product adaptations Special levers: special shapes and lengths, flexible levers, adjustable, two-pole, pinned,. Special connections: angled, with 7mm spacing (RAST 7-WR7), for PCB, long solder (WL),... High operating temperature: +0 C Special contacts (for gold plated contacts: see V Dual-current - 86 ) Reduced or increased switching hysteresis: max 0. mm to max 0.8 mm differential travel Specific operating force easily achievable Telescopic plunger and adjustable fixing by threaded barrel: plastic version (6L accessory) or metal version (SP960) Housing material complying with IEC 60- for unattended appliances: GWFI 80 C / GWIT 77 C (SP9680) 00 Va ENEC approved versions
0/08 Principles Single break snap-action switch Changeover - SPDT (form C) Normally closed - SPST-NC (form B) Normally open - SPST-NO (form A) Curves Operating curve for types 86* / 86* / 866 L { R = ms ~ cos ϕ = 0,8 0 7 8 6 8 6 0 6 0 V~ 0 8 6 6 00 V~ 0 0,0, 0, 06 Operating curve for type 86 Operating curve for type 86 Operating curve for types 86 / 86 SP 6 0 7 0 6 0 0 L { R = ms ~ cos ϕ = 0,8 0,0, 0, 0 0 0 V~ 0 8 0 7 0 6 0 L { R = ms ~ cos ϕ = 0,8 0,0, 0, 0 0V~ 0 8 0 7 0 6 0 0, 0, 0, L { R = ms ~ cos ϕ = 0,8 B Number of cycles B Number of cycles B Number of cycles B Number of cycles C Resistive circuit C Resistive circuit C Resistive circuit C Resistive circuit D Inductive circuit D Inductive circuit D Inductive circuit D Inductive circuit E Mechanical life limit E Mechanical life limit E Mechanical life limit E Mechanical life limit F Current in Amps F Current in Amps F Current in Amps F Current in Amps * For 86 UL and 86 UL: please consult us 0V~ Dimensions Product 86,8, ± 0,,8 ± 0, + 0, 0, + 0,0 =, max = 0, ± 0, = + + 0, 0,0, ± 0,,8 0, ± 0,,9 7,8 ± 0, B Total travel position Connections W solder W quick-connect 6. x 0.8 WR quick-connect 6. x 0.8 for RAST connector
0, x7 SWITCHES.CROUZET.COM 0/08 W screw with clamp W6A quick-connect.8 x 0. W6D8 quick-connect.8 x 0.8, Ø, 0, 0,0,8 0,, Ø, 0, 0,0,8 0, 7, 7, 0, W7A quick-connect.8 x 0. W7A8 quick-connect.8 x 0.8, double,6 +0, Ø, +0, 7, 0,,8 0, Ø, 0,0 7, ±0,,6,8 0,7 0, Actuator mounting positions To calculate force Divide the switch force by the coefficient given in the table. To calculate travel Multiply the switch travel by the same coefficient. Example : 8 6 with lever 6 A - R. position A (coeff. ) Operating force: 0.8 : = 0. N Overtravel:. x =.8 mm 6A flat 6E roller 6L telescopic plunger 6. R 0, x 7. 8 Ø.8 6F dummy roller 6G dummy roller R,8 B Thread length C Total travel 0, x 7 7 ±0, Nut thickness Max. torque, mm 0. N.m mm 0.7 N.m, mm N.m 6V plastic Other shapes and dimensions: consult us Also available are pinned actuators mounted on position D (factory mounting), same as for 860 series. (datasheet: SP960)
0/08 Mounting accessories Nut for 6L Housing 6J for connections W R and mounting accessories Part numbers for standard actuators 7970 7007 797 70079 70078 Flat 6A R. Flat 6A R. Roller 6E R.6 Roller 6E R. Dummy roller 6F R. Fixing positions Coefficient Operating position, except 866 (mm) Operating position 866 (mm) Part numbers for standard actuators A B. ±. ±0..8 ± ±0. 7986 A B C.. ±.. ±. ±0.8. ±..8 ±.9 ±0.8 A B 0. ±. 0. ±0.8 0. ±. 0. ±0.8 A B C A B,.6.8 0. ±.9 0. ±. 0. ±. 0. ± 0. ±0.7 9.7 ±.9 0. ±. 0. ±. 0. ± 0. ±0.7 7908 70608 Dummy roller 6G R,8 **Telescopic plunger 6L Manual actuation Plastic6V Housing 6J Nut for 6L Fixing positions Coefficient Operating position, except 866 (mm) Operating postion 866 (mm) A B C.6.8..7 ±.7 ±0.7.7 ±0.. ±. ±0.7. ±0. D, ±, ± Except where otherwise indicated, flat and roller levers are supplied unmounted. For factory mounting, specify fixing position A, B or C. ** For 86, 86, 86, 866. Mounted in factory (supplied without nut) D 8. ±0. 8. ±0. V-86 microswitches with referenced actuators 6A R. 6A R. 6E R.6 6E R. 6L 7970 7007 797 70079 Pos A Pos B Pos A Pos B Pos C Pos A Pos B Pos A Pos B Pos C Pos D 86 I W STD 8600 860 860 860 860 860 8606 8607 8608 8609 I W STD 860 860 860 860 8606 8607 8608 8609 8600 860 8606 UL 86098 I W6A STD 860 860 8606 8677 8607 8608 8609 8600 860 860 86 I W STD 86067 86068 86069 860 8607 8607 8607 8607 8606 8607 860 I W STD 86078 86079 86080 8608 8608 8608 867 8608 86007 8608 868 UL 868 86 860 I W6A STD 86088 86089 86090 8609 8609 8609 8609 8609 86096 86097 UL 867 86 860 86 86 I W STD 869 860 86 86 86 86 86 866 867 868 - UL - I W STD 86 86 86 86 86 866 867 868 86 869 - UL - I W6A STD 86 86 86 866 86 866 867 868 869 8660 - UL - 866 I W STD 866 Standard product Product made to order Contact us
6 0/08 Installation recommendations See Basic technical concepts How to order Use the 8 digit part numbers when they are defined Other cases, precise: Type of microswitch - Function - Connection - UL approval* - Actuator* - Fixing position* - Adaptation* + Mounting accessories* * if needed Example: 86 C WR UL 6E R.6 B SP9680 + 7908 Examples of special adaptations Telescopic plunger and adjustable fixing. mm overtravel. Metal version for heavy duty (SP960) Door switch for industrial vehicle Angled W terminals RAST 7mm - WR7 connections Long solder terminals (WL) One-way roller lever (active on right, idle-return on left) Lever fitted with POM ramp for transverse actuation Two-pole lever Spring lever for extra-long overtravel Fully specific integrable switching module with terminal block for time switch Auxiliary contact for power switches and circuit breakers. Integrates the V-86 mechanism Warning: The product information contained in this catalogue is given purely as information and does not constitute a representation, warrantly or any form of contractual commitment. Crouzet Automatismes SAS and its subsidiaries reserve the right to modify their products without notice. It is imperative that we should be consulted over any particular use or application of our products and it is the responsability of the buyer to establish, particularly through all the appropriate tests, that the product is suitable for the use or application. Under no circumstances will our warranty apply, nor shall we be held responsible for any application (such as any modification, addition, deletion, use in conjunction with other electrical or electronic components, circuits or assemblies, or any other unsuitable material or substance) which has not been expressly agreed by us prior to the sale of our products.
7 0/08 MINIATURE MICROSWITCHES - PREMIUM V Dual-current - 86 High precision flexible leaf snap-action mechanism Operation without balance-point, even at extremely slow actuating speed Broad range of operating forces from 0. N to N Use from ma Vc to A 0 Va Operating temperature from -60 C up to +0 C - High resistance to shock and vibration Mechanical life up to 0 million cycles ENEC and curus approved Wide choice of actuators on possible fixing positions (pre-assembled or retrofittable) Main specifications Dual-current 868 Dual-current High force 868 SP7 Dual-current Very low force 869 Dual-current Ultra low force 869 SP6 Standard UL Standard UL Standard UL Standard UL Function Connections I (changeover) W (solder) 8680 8680 8680 868008 8698 8690 I (changeover) W (QC 6.x0.8) 86806 8687 868 8689 86906 8690 8697 I (changeover) W6A (QC.8x0.) 868 868 869 I (changeover) WR (QC 6.x0.8, Rast ) I (changeover) W (screw + clamp) I (changeover) W6D8 (QC.8x0.8) 869 I (changeover) W7A (QC.8x0.) 8680 I (changeover) W7A8 (QC.8x0.8, double) R (normally closed) W (solder) 86807 8680 R (normally closed) W (QC 6.x0.8) 868 86907 8696 R (normally closed) W6A (QC.8x0.) R (normally closed) WR - W - W6D8 W7A - W7A8 C (normally open) W (solder) 8688 C (normally open) W (QC 6.x0.8) 868 8687 C (normally open) W6A (QC.8x0.) 8686 8689 86908 C (normally open) WR - W - W6D8 W7A - W7A8 Electrical characteristics Rating nominal / 0 V AC (A) * * * * Rating thermal / 0 V AC (A) 6 6 Rating ENEC/NF / 0 V AC (A) 0.(0.0) 0.(0.0) 0.(0.0) 0.(0.0) 0.(0.0) 0.(0.0) 0.(0.0) 0.(0.0) Rating UL / V AC (A) - - - - Mechanical characteristics Maximum operating force (N) 0.8 0. 0. Min. Release force (N) 0. 0.0 0.0 Maximum total travel force (N). 0.0 0. Max. permitted overtravel force (N) 0 0 0 0 Maximum rest position (mm) 6. 6. 6. 6. Operating position (mm).7 ±0..7 ±0..7 ±0..7 ±0. Maximum differential travel (mm) 0. 0. 0. 0. Min. overtravel (mm).... Ambient operating temperature ( C) -60 + -60 + -0 + -0 + Mechanical life for / OT (operations) x 0 7 0 7 x 0 7 x 0 7 Contact gap (mm) 0. 0. 0. 0. Weight (g).6.6.6.6 Additional specifications - Case: PA6 GF (UL 9-V / GWFI 960 C) - Standard versions PBT GF (UL 9-V0 / GWFI 960 C) - UL versions PET GF (UL 9-V0 / GWFI 960 C / GWIT 77 C) - On request - Button: PA66 - Moving blade: silver-plated beryllium copper - Contacts: gold alloy on silver alloy, crossbar (dual-current) - Terminals: brass (except W : copper nickel) - Levers: stainless steel or polyamide, polyamide roller - Nuts for 6L: nickel-plated brass - Degree of protection: IP0 (mechanism) - Proof tracking index: PTI 0 - Protection against electric shock: button and 6-type actuators have reinforced insulation for Ui 0V / Uimp,kV / pollution - Recommended min actuating speed: 0.00 mm/s - Certification marks: Standard versions: UL versions: Standard product Product made to order Contact us
8 0/08 Product adaptations Special levers: special shapes and lengths, flexible levers, adjustable, two-pole, pinned,. Special connections: angled, with 7mm spacing (RAST 7-WR7), for PCB, long solder (WL), High operating temperature: +0 C Reduced or increased switching hysteresis: max 0. mm to max 0.8 mm differential travel Specific operating force easily achievable Telescopic plunger and adjustable fixing by threaded barrel: plastic version (6L accessory) or metal version (SP960) Housing material complying with IEC 60- for unattended appliances: GWFI 80 C / GWIT 77 C (SP9680) Principles Single break snap-action switch Changeover - SPDT (form C) Normally closed - SPST-NC (form B) Normally open - SPST-NO (form A) Curves Operating curve for type 868 and 868 SP 7 Operating curve for types 869 and 869 SP 6 0 8 0 7 0 6 0 V~ 0 0, 0, 0, B Number of cycles C Resistive circuit D Mechanical life limit E Current in Amps 0 8 0 7 0 6 0 V~ 0 0, 0, 0, B Number of cycles C Resistive circuit D Mechanical life limit E Current in Amps * These models are designed to operate equally well on low-current ( ma V minimum recommended) or medium-current ( A maximum) circuits. However, a given product should only be used to switch one type of circuit during its working life. Dimensions Product 86,8, ± 0,,8 ± 0, + 0, 0, + 0,0 =, max = 0, ± 0, = + + 0, 0,0, ± 0,,8 0, ± 0,,9 7,8 ± 0, B Total travel position Connections W solder W quick-connect 6. x 0.8 WR quick-connect 6.x0.8 for RAST connector
0, x7 SWITCHES.CROUZET.COM 9 0/08 W screw W6A quick-connect.8 x 0. W6D8 quick-connect.8 x 0.8, Ø, 0, 0,0,8 0,, Ø, 0, 0,0,8 0, 7, 7, 0, W7A quick-connect.8 x 0. W7A8 quick-connect.8 x 0.8, double,6 +0, Ø, +0, 7, 0,,8 0, Ø, 0,0 7, ±0,,6,8 0,7 0, Actuator mounting positions To calculate force Divide the switch force by the coefficient given in the table. To calculate travel Multiply the switch travel by the same coefficient. Example : 8 6 8 with lever 6 A - R. position A (coeff. ) Operating force: 0.8 : = 0. N Overtravel:. x =.8 mm 6A flat 6E roller 6L telescopic plunger 6. R 0, x 7. 8 Ø.8 6F dummy roller 0, x 7 6G dummy roller 7 ±0, R,8 B Thread length C Total travel Nut thickness Max. torque. mm 0. N.m mm 0.7 N.m. mm N.m 6V plastic Other shapes and dimensions: consult us Also available are pinned actuators mounted on position D (factory mounting), same as for 860 series. (datasheet: SP960)
0 0/08 Mounting accessories Nut for 6L Housing 6J for connections W R and mounting accessories Part numbers for standard actuators 7970 7007 797 70079 70078 Flat 6A R. Flat 6A R. Roller 6E R.6 Roller 6E R. Dummy roller 6F R. Fixing positions Coefficient Operating position (mm) A B. ±. ±0. A B C.. ±.. ±. ±0.8 A B 0. ±. 0. ±0.8 A B C A B,.6.8 0. ±.9 0. ±. 0. ±. 0. ± 0. ±0.7 Part numbers for standard actuators 7986 7908 70608 Dummy roller 6G R,8 **Telescopic plunger 6L Manual actuation Plastic6V Housing 6J Nut for 6L Fixing positions Coefficient Operating position (mm) A B C.8..7 ±.7 ±0.7.7 ±0. D. ± D 8. ±0. Except where otherwise indicated, flat and roller levers are supplied unmounted. For factory mounting, specify fixing position A, B or C. ** For 868, 868 SP7. Mounted in factory (supplied without nut) V Dual-current - 86 microswitches with referenced actuators 6A R. 6A R. 6E R.6 6E R. 6L 7970 7007 797 70079 Pos A Pos B Pos A Pos B Pos C Pos A Pos B Pos A Pos B Pos C Pos D 868 I W STD 8688 8689 8680 868 868 868 868 868 8686 8687 868 I W STD 8680 868 868 868 868 868 8686 8687 8688 8689 8680 I W6A STD 8686 8686 8686 8686 86866 86867 868 86868 86869 86870 Installation recommendations See Basic technical concepts How to order Use the 8 digit part numbers when they are defined Other cases, precise: Type of microswitch - Function - Connection - UL approval* - Actuator* - Fixing position* - Adaptation* + Mounting accessories* * if needed Example: 868 C W6A UL 6L SP9680 + 70608 Standard product Product made to order Contact us
0/08 Examples of special adaptations Plastic lever with no play in rest position Spring lever for extra-long overtravel One-way roller lever (active on right, idle-return on left) Angled W terminals Telescopic plunger and adjustable fixing. mm overtravel. Metal version for heavy duty. Long barrel. Fully specific integrable switching module with terminal block for time switch Auxiliary contact for power switches and circuit breakers. Integrates the V - 86 mechanism Door switch for industrial vehicle Warning: The product information contained in this catalogue is given purely as information and does not constitute a representation, warrantly or any form of contractual commitment. Crouzet Automatismes SAS and its subsidiaries reserve the right to modify their products without notice. It is imperative that we should be consulted over any particular use or application of our products and it is the responsability of the buyer to establish, particularly through all the appropriate tests, that the product is suitable for the use or application. Under no circumstances will our warranty apply, nor shall we be held responsible for any application (such as any modification, addition, deletion, use in conjunction with other electrical or electronic components, circuits or assemblies, or any other unsuitable material or substance) which has not been expressly agreed by us prior to the sale of our products.