Rev. Date: 20-Jun-2010 Ultipor Nylon 6,6 and N6,6 Posidyne Membrane Description Pall provides a complete range of Nylon 6,6 membranes for fluid filtration in the pharmaceutical, biotechnology, electronics, food and beverage industries, and for analytical applications. Ultipor Nylon N6,6 Membranes Ultipor Nylon 6,6 membranes are very resistant to mechanical, chemical and thermal stress. They can be used in either direction, are inherently hydrophilic, have high flow rates, low pressure drops and very low extractables. Where appropriate, they can be steam sterilized without change in flow or pore size characteristic. Ultipor Nylon 6,6 membranes are available in a wide range of pore sizes, and as supported and unsupported membranes. N6,6 Posidyne Membranes N6,6 Posidyne membranes possess all the benefits of the Ultipor N6,6 range, plus an important additional feature: Positive zeta potential in aqueous fluids. Many important contaminants, such as endotoxins, bacteria, viruses and colloidal silica are negatively charged, and the retention of these particles is therefore significantly improved with N6,6 Posidyne membranes. N6,6 Posidyne membranes are available in various pore sizes. Major Advantages Safe retention of contaminants Inherently hydrophilic Excellent flow rates Lot-to-lot and within-lot consistency Excellent handling properties Mechanically robust Low extractables Compatible with a variety of sealing methods Passes USP Class VI-121 C plastic test for biosafety Specifications Dimensions Master rolls: 12.75 x500 Packaging Core: Cores are PVC 3.0 I.D. Packaging: Shrink-wrap around outside of each roll.
Chemical Compatibility Acids Acetic acid - glacial: Not Acetic acid - 10%: Acetic acid - 30%: Acetic acid - 90%: Hydrochloric acid - conc. (35%): Not Hydrochloric acid - 6N (20%): Not Hydrochloric acid - 1N (3.3%): Not Nitric acid - conc. (67%): Not Nitric acid - 6N (27%): Not Sulfuric acid - conc. (96%): Not Sulfuric acid - 6N (16%): Insufficient Data Alcohols Amyl alcohol: Benzyl alcohol: Butanol: Ethanol: Insufficient Data Isopropanol: Not Methanol: Insufficient Data Aromatic Hydrocarbons Benzene: Toluene: Xylene: Bases Ammonium hydroxide - 3N (5.7%): Ammonium hydroxide - 6N (11.4%): Potassium hydroxide - 3N (15%): Sodium hydroxide - 3N (11%): Sodium hydroxide - 6N (22%): Esters Amyl acetate: Insufficient Data Butyl acetate: Cellosolve acetate: Ethyl acetate: Isopropyl acetate: Insufficient Data Methyl acetate: Ethers Ethyl ether: Limited Resistance Tetrahydrofuran: Tetrahydrofuran/water (50/50 v/v): Glycols Ethylene glycol: Limited Resistance Glycerol: Propylene glycol: Limited Resistance Halogenated Hydrocarbons Carbon tetrachloride: Chloroform: Ethylene dichloride: Limited Resistance Methylene chloride: Limited Resistance Tetrachloroethylene: Insufficient Data Ketones Acetone: Limited Resistance Cyclohexanone: Methyl ethyl ketone: Methyl isobutyl ketone: Miscellaneous Acetonitrile: Limited Resistance Dimethyl formamide: Dimethyl sulfoxide: Insufficient Data Formaldehyde - 37%:
Formaldehyde - 4%: Hexane - dry: Kerosene: Insufficient Data Pyridine: Insufficient Data 18 Megohn water: Oils Cottonseed: Peanut: Insufficient Data Sealing Method Compatibility ABS Acrylic EVA Latex Natural Rubber Poly Carbonate Polyester (PBT) Polyethylene Polypropylene PVC
Silicone Mechanical Seal: Not Compatible Styrene Synthetic Rubber Urethane (thermoplastic) Applications General filtration Laboratory filtration devices Performance Typical Membrane Characteristics Base Material Pore Size (µm) Thickness (mils) Thickness (µm) Supported nylon (hydrophilic) (LoProdyne LP) 0.2 5.5-7.0 139.7-177.8 Supported nylon (hydrophilic) (LoProdyne LP) 0.45 5.7-6.7 144.8-170.2 Supported nylon (hydrophilic) (LoProdyne LP) 1.2 5.0-7.5 127.0-190.5 Typical Performance Characteristics Base Material Supported nylon (hydrophilic) (LoProdyne LP) Supported nylon (hydrophilic) (LoProdyne LP) Supported nylon (hydrophilic) (LoProdyne LP) Pore Size (µm) Point (psi) Point (bar) Protein Binding (µg/cm 2 ) (inches Hg) (bar) 0.2 51.0-56.0 3.52-3.86 N/A < 26.5 < 0.89 0.45 32.0-36.0 2.21-2.48 N/A < 8.0 < 0.27 1.2 13.8-16.2 0.95-1.12 < 9.0 < 4.2 < 0.14 Typical Membrane Characteristics Base Material Pore Size (µm) Thickness (mils) Thickness (µm) (Ultipor, Biodyne A) 0.2 5.5-7.0 139.7-177.8 0.45 5.7-6.7 144.8-170.2 0.65 5.6-6.4 142.2-162.6 1.2 5.5-7.0 139.7-177.8 3.0 11.0-12.5* 279.4-317.5
5.0 11.0-12.5* 279.4-317.5 nylon (Posidyne, Biodyne B) 0.2 11.0-13.0* 279.4-330.2 0.45 5.7-6.7 144.8-170.2 0.8 5.5-7.0 139.7-177.8 1.2 11.0-12.5* 279.4-317.5 3.0 11.0-12.5* 279.4-317.5 5.0 11.0-12.5* 279.4-317.5 *Dual layer measurement. Typical Performance Characteristics Base Material Pore Size (µm) Point (psi) Point (bar) DNA Testing (pg) (inches Hg) (bar) 0.2 51.0-56.0 3.52-3.86 < 10 < 26.5 < 0.90 0.45 32.0-36.0 2.21-2.48 < 10 < 8.0 < 0.27 0.65 21.0-24.0 1.45-1.65 N/A N/A N/A 1.2 13.8-16.2 0.95-1.12 < 10 < 4.2 < 0.14 3.0 > 9.0 > 0.62 N/A < 2.5 < 0.08 5.0 > 5.0 > 0.34 N/A < 1.5 < 0.05 0.2 N/A N/A N/A < 25.0 < 0.85 0.45 32.0-36.0 2.21-2.48 < 10 N/A N/A 0.8 17.5-21.0 1.21-1.45 N/A < 5.5 < 0.19 1.2 13.0-15.0 KL5 0.90-1.03 N/A < 3.3 < 0.11 3.0 9.0-11.0 KL5 0.62-0.76 N/A < 2.0 < 0.07 5.0 5.0-7.0 KL5 0.34-0.48 N/A < 1.1 < 0.04 The Biodyne, LoProdyne, Posidyne, and Ultipor names are registered trademarks of Pall Corporation and are not available for use. Products in this datasheet may be covered by one or more patents including US 4,693,985; and US 4,886,836. Ordering Information For more information and to order this product, please contact the Pall Industrial Materials representative for your region, or email us at industrialmaterials@pall.com Western Hemisphere Pall Trincor Pall Membrane Technology Center 770 Pennsylvania Drive, Suite 100 Exton, Pennsylvania 19341 +1.610.458.9500 phone +1.610.458.9595 fax Europe Pall Filtersystems GmbH Werk Schumacher Crailsheim
Zur Fluegelau 70 D 74564 Crailsheim +49 7951 302 phone +49 7951 26511 fax Asia Nihon Pall Ltd. 6-8-1, Nishishinjuku Shinjuku-Ku Tokyo, Japan, 163-6017 +81 3 6901 5800 phone +81 3 5322 2134 fax Contact Information Copyright Pall Corporation Visit us on the Web at www.pall.com This information is accurate as of the revision date indicated.