SUBJECT TO CHANGE WITHOUT NOTICE

Similar documents
ISOCON-6. 24V AC or DC POWERED ISOLATING SIGNAL CONVERTER

ISOCON-3 MAINS POWERED ISOLATING SIGNAL CONVERTER

Operating Instructions for Digital Manometer. Model: MAN-SD

Alternating Current (AC): Alternating Current is electric current that reverses directions at regular intervals.

xlogic SuperRelay is a compact and expandable CPU replacing mini PLCs, multiple timers, relays and counters.

TeSys circuit-breakers

Request Ensure that this Instruction Manual is delivered to the end users and the maintenance manager.

INSTRUCTION MANUAL FOR MM10 Relay

VIBRATION METER Acceleration & Velocity Model : VB-8201HA

Instruction. Vacuum Circuit Breaker Operator Module. Type 3AH 4.16kV to 38kV. Power Transmission & Distribution

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-T...

MCB NB1-63H Miniature Circuit Breaker

Data Bulletin. SEPAM 49RMS Application Note Protection for Motor Applications Class Number SEPAM 49RMS Protection for Motor Applications

Acceleration/Velocity/Displacement VIBRATION METER

Safety Precautions WARNING If critical situations that could lead to user s death or serious injury is assumed by mishandling of the product.

PHOENIX CONTACT - 04/2016. Features

S Sapling INSTALLATION MANUAL FOR FIELD SELECTABLE ANALOG CLOCKS SAA SERIES SPECIFICATIONS. advanced time and control systems

XD1-L Cable Differential Protection Relay

Section 5. TADS Data Reporting Instruction Manual DRAFT Section 5 and Associated Appendices With Proposed Event Type Numbers

Acceleration, Velocity, Separate probe VIBRATION METER Model : VB-8202

CALEFFI. Modulating digital controller for heating and cooling. 161 series 01122/08 GB. replaces dp 01122/05

OPERATION MANUAL. Acceleration, Velocity RMS measurement, Metric & Imperial unit PEN VIBRATION METER Model : PVB-820

Thermal-Magnetic Circuit Breaker 2210-S2..

Thermal-Magnetic Circuit Breaker 2210-S2..

Thermal-Magnetic Circuit Breaker 2210-T2...

Presco AG. Standard Air Capacitor 10 nf / 2 kv. Type CL-0N10-K201. User's manual

Sealing possibility Electrical endurance (ops) Mechanical endurance (ops) Overvoltage category Standards

Thermal-Magnetic Circuit Breaker 2210-S2...

SSC-JE EE POWER SYSTEMS: GENERATION, TRANSMISSION & DISTRIBUTION SSC-JE STAFF SELECTION COMMISSION ELECTRICAL ENGINEERING STUDY MATERIAL

Thermal-Magnetic Circuit Breaker 2210-S2...

Thermal-Magnetic Circuit Breaker 2210-S2..

Electrical installation solutions for buildings Technical details RCDs

OPERATION MANUAL. Acceleration, Velocity RMS measurement, Metric & Imperial unit PEN VIBRATION METER Model : PVB-820

Pressure Display Controller

TeSys enclosed starters 2

MX Series COMPACT AND USER FRIENDLY. Metal Tube Type Variable Area Flowmeter OUTLINE STANDARD SPECIFICATION MODEL CODE MX-400, MX-71 MX-52E

16 Input AC Block I/O Module

Non-Contact Safety Systems CMS

WE RE HERE TO HELP: 1 (844) LIGHTCLOUD

5SJ4...-.HG Circuit Breakers to IEC and UL 489

90 MCB range Modular circuit breakers for circuit protection

THE DIMENSIONING OF ELECTRICAL CONDUCTORS FOR USE IN "PANEL BOARDS" ADDRESSED TO HAZARDOUS AREAS - PART THREE

Impedance relay and protection assemblies

TECHNICAL MANUAL 820 LX / 910 LX / 1300 LX

Overload Relays. SIRIUS 3RU1 Thermal Overload Relays. 3RU11 for standard applications. 5/46 Siemens LV 1 AO 2011

CALYS 120 IS. ATEX documenting multifunction calibrator with high accuracy 0.006%

90 MCB MODULAR CIRCUIT BREAKERS FOR CIRCUIT PROTECTION

VIBRATION METER. Instruction Manual.

EXEMPLAR NATIONAL CERTIFICATE (VOCATIONAL) ELECTRICAL PRINCIPLES AND PRACTICE NQF LEVEL 3 ( ) (X-Paper) 09:00 12:00

EXISTING PANEL "22C" CIR.# TYPE DESCRIPTION VOLTAGE 208Y/120V WIRE SIZE EXISTING PANELBOARD SCHEDULE PHASE WIRE NEUTRAL AIC MAIN % (E) 400A MLO

INSTRUCTION AND MAINTENANCE MANUAL FOR TECHTROL COUNTER CONTROLLER & TOTALISER (TCCT)

32 Input AC Block I/O Module

S ENTEK Unit 6 & 7 Crittall Court, Crittall Drive, Springwood Industrial Estate, Braintree, Essex, CM7 2SE Tel: +44 (0) Fax: +44 (0)

Varius SUMMARY OF MODELS OF HRC FUSE-LINKS

CHAPTER 2 OVERVOLTAGE DUE TO SELF-EXCITATION AND INRUSH CURRENT DUE TO CAPACITOR SWITCHING

DS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.

Current protection I 2 t long-time protection

B 222 COMPENSATING CONTROLLER WITH PRODUCTION DHW. RTE 643 Eng. C2 COSTER RING. B RTE 643 Eng. C LB REV. 03

Type Function Output config. Auxiliary Case Page

POINTS OF CAUTION BEFORE USE...

Operating instructions Magnetic-inductive flow meter. SM6x01 SM7x01 SM8x / / 2015

Swegon CASA Smart ModBus Register SCB 3.0

QTi DALI-T/E 2X18 42/ DIM

Display counter electromechanical

POWER FACTOR IN THE DIGITAL AGE A N E N V I R O N M E N T A L P O T E N T I A L S W H I T E P A P E R. Power Quality For The Digital Age

Film Capacitors. EMI suppression capacitors. Date: June 2018

BERMAD Irrigation. BIC2000 Weather Station SYSTEM GUIDE VERSIONS : BIC ; PC 4.90

Microcare LCD Solar MPPT User Documentation

Kjeltec 2300 Analyzer Unit

PTF30 Series. Features. Ordering information. G 6 N N F8 (0 to 5 kgf/cm 2 ) PTF30

DIGITAL THERMOMETER OPERATOR S MANUAL

THERMOCOUPLE CHARACTERISTICS TRAINER

PAA-ANALYZERS PRINCIPLE OF OPERATION

Semiconductor (AC) fuses

Determination of Fault Location in Shunt Capacitor Bank through Compensated Neutral Current

XM1 Motor Protection Relay. Manual XM1 (Revision B)

PRODUCT SPECIFICATIONS

C60N circuit breakers0 B, C and D curves IEC 60898: 6000 A, IEC : 10 ka

No /06e. Technical Manual Multistage-Temperature-/Differential Controller TAR x700

Request Ensure that this Instruction Manual is delivered to the end users and the maintenance manager.

UL 1077 DIN Rail Supplementary Protectors

Microprocessor Based Characteristics and adjustments

DIGITAL ABBE REFRACTOMETER INE-WYA-2S OPERATING INSTRUCTION PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION

Multi-function, economical instrument with 4 functions in the same casing. Accessibility and safety: large-dimension terminals Insulated circuits

473 Dew Point Hygrometer

Products for Luminaire Protection and Power Adjustment Products

Periodic Inspection and Testing of Electrical Installations Sample Test ( ) Version 1.3 July 2018

Proximity Sensor Ideal for High Temperatures and Cleaning Processes. Applicable to 120 C

Chapter 1W Basic Electromagnetic Concepts

Commercial Generator Parts Catalog. PROTEC Series

Height Master Page 343. Check Master Page 347. Calibration Tools Page 352

Chapter 02. Voltage and Current. Atomic Theory Review. Atomic Theory Review. Atomic Theory Review. Electrical Charge.

08/072 PKZ2 Motor-Protective Circuit-Breakers Tripping Characteristics

PHASED OUT. FL ballasts Electronic dimming. PCA TC BASIC Y II, W BASIC compact

AIR CONDITIONER (SPLIT TYPE) SERVICE MANUAL

CHV Series Vector Control Inverter Options. Operating Instructions for Tension Control Card


Digital Current Transducer HO-SW series I P N = A. Ref: HO 100-SW; HO 150-SW; HO 200-SW; HO 250-SW

MODEL 107 TEMPERATURE PROBE INSTRUCTION MANUAL

Loss of excitation protection function (40Z)

Transcription:

EARTH LEAKAGE RELAY ELR VI Programmable Multi-function Relay www.sifamtinsley.co.uk Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers Analogue Panel Meters EARTH LEAKAGE RELAY - ELR VI Programmable Multi-function Relay User Manual - Issue 1.0 Shunts Digital Multimeters Clamp Meters Insulation Testers SUBJECT TO CHANGE WITHOUT NOTICE This manual superseded all previous versions please keep for future reference

2 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 3

1. INTRODUCTION Earth Leakage Relay: - The purpose of Earth-Leakage protection is to measure the Earth leakage current of an electrical installation, or part of an installation, and interrupt the power supply if the Earth-Leakage current becomes dangerous to property. Earth Leakage Relay with associated sensors (Core Balance Current Transformers), measure the leakage current in an electrical installation to detect levels that may be damaging. When used for protection, they cause an associated circuit breaker or switch to interrupt the supply of power to the protected system. Earth Leakage Relay may also be used to monitor earth-leakage in electrical insulation due to aging of cables or extensions in the installation. Continuous measurement of leakage currents makes it possible to plan maintenance on faulty circuits before an increase in the leakage currents leads to a complete shutdown of the installation. Alarming / Monitoring Applications :- A need to set up the relay for an alarm only (but not protection) may be encountered in situations where an automatic shutdown would introduce additional hazards and therefore an operator must make the shutdown decision (e.g., continuous industrial processes, life-support equipment, or a fire pump circuit). Critical processes of industrial machines can also benefit by application of Earth Leakage Relay in alarm mode. In these cases, providing indication of higher than normal earth-leakage current can allow planned maintenance, rather than a costly disruption of production. 4 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 5

6 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 7

8 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 9

10 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 11

12 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 13

14 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 15

16 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 17

18 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 19

20 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 21

22 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 23

24 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 25

26 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 27

28 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 29

30 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 31

32 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 33

34 Programmable Multi-function Relay Issue 1.0

4.1.3.4 Trip Delay Pressing or key, meter will enter into edit mode. Pressing key increments digit value & Pressing key decrements digit value. Pressing ENTER key will confirm new trip Delay. After setting new trip Delay meter will goto Hysteresis (refer section 4.1.3.5) Note: - 1. Alarm tripping delay will be Earth Leakage Current Trip delay. 2. If ELC (Earth Leakage Current) parameter is disabled then user can set Alarm delay upto 30 Sec. TABLE 2 (B): ELR+ Parameters Upper Limit Lower limit ELC.1(Earth Leakage Current 1) ALr.1(Alarm 1) ELC.2(Earth Leakage Current 2) ALr.2(Alarm 2) 30 sec 30 sec 30 sec 30 sec Note: ELR model has only ELC1 and Alarm1. TABLE 2 (C): ELR VI ELC.1(Earth Leakage Current 1) ALr.1(Alarm 1) PH.OC (Phase Over Current) PH.UC (Phase under Current) PH.OU (Phase Over Voltage) PH.uU (Phase under Voltage) 0 sec 0 sec 0 sec 0 sec Parameters Upper Limit Lower limit 30 sec 30 sec 30 sec 30 sec 0 sec 0 sec 0 sec 0 sec 0 sec 0 sec 30 sec 30 sec r.por (Reverse Power) 30 sec 0 sec Inverse-time tripping curve (applicable to Earth Leakage Current) :- The inverse-time tripping curve built into the Earth Leakage Relay optimize protection of property and enhance continuity of service. Protection is optimized because the higher the Earth Leakage current it detects, the faster the relay will operate. Issue 1.0 Programmable Multi-function Relay 35

36 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 37

38 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 39

40 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 41

42 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 43

44 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 45

46 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 47

Earth Leakage Relay - ELR VI 48 Programmable Multi-function Relay Issue 1.0

L Earth Leakage Relay - ELR VI 8. CONNECTION DIAGRAMS A) DIN RAIL MOUNTABLE ELR: 1 2 3 4 7 8 9 CBCT NC NC NC NC NC L N L N E Aux Supply L O A D S1 S2 5 6 EL1 ELR 1 2 7 8 9 CBCT1 NC NC NC N L N E Aux Supply L O A D S1 S2 5 6 L EL1 N CBCT2 L O A D E EL 2 S1 S2 3 4 ELR+ Issue 1.0 Programmable Multi-function Relay 49

L Earth Leakage Relay - ELR VI Current Voltage Aux Supply 3 4 1 2 7 8 9 CBCT NC L N S1 E S2 L N L O A D S1 S2 5 6 EL1 ELR - VI (For Earth to Neutral Voltage Measurement) Current 3 4 Voltage Aux Supply 1 2 7 8 9 CBCT NC N L N S1 E S2 L O A D S1 S2 5 6 EL1 ELR-VI 50 Programmable Multi-function Relay Issue 1.0

L Earth Leakage Relay - ELR VI B) PANEL MOUNTABLE ELR: 3 4 5 6 7 8 9 10 CBCT NC NC NC NC NC NC L N L N E Aux Supply L O A D S1 S2 1 2 EL1 ELR 5 6 7 8 9 10 CBCT1 NC NC NC NC L N N E Aux Supply L O A D S1 S2 1 2 L EL1 N CBCT2 L O A D E EL 2 S1 S2 3 4 ELR+ Issue 1.0 Programmable Multi-function Relay 51

Current Voltage Aux Supply 3 4 6 8 9 10 5 7 CBCT NC NC L N S1 E S2 L N L O A D S1 S2 1 2 EL1 ELR - VI (For Earth to Neutral Voltage Measurement) Current 3 4 Voltage Aux Supply 6 8 9 10 5 7 CBCT NC NC L N S1 E S2 L N L O A D S1 S2 1 2 EL1 ELR-VI 52 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 53

54 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 55

10. Core Balance Current Transformer (CBCT):- TWE - 73/30(50) TWE - 95/50(40) TWE - 135/85(30) TWE - 165/130(30) TWE - 260/200(22) 56 Programmable Multi-function Relay Issue 1.0

Issue 1.0 Programmable Multi-function Relay 57

Models : - > TWE - 73/30(50) > TWE - 95/50(40) > TWE - 135/85(30) > TWE - 165/130(30) CBCT Specications: - CBCT Type Turns Ratio Rated Current System Voltage System Frequency Insulation Voltage Distance Between CBCT and ELR Operating Temperature Features: - > Slim Design > Encapsulated CBCT > Compact in size > Light in Weight : Closed Toroid : 600 / 1A : 30A : 720 V maximum : 50 Hz or 60 Hz : 3kV for 1 minutw : < 1 meters : -10 C to +55 C 58 Programmable Multi-function Relay Issue 1.0

Dimensions :- OD ID Axial CBCT TWE - 73/30(50) TWE - 95/50(40) TWE - 135/85(30) TWE - 165/130(30) Dimensions (in mm) OD ID Axial 73 30 50 95 50 40 135 85 30 165 130 30 L Current Ranges 30mA to 30A 30mA to 30A 30mA to 30A 500mA to 30A W H W CBCT L H W TWE - 260/200(22) 260 200 22 Current Ranges 30mA to 30A Issue 1.0 Programmable Multi-function Relay 59

Contact Sifam Tinsley Instrumentation Ltd 1 Warner Drive Springwood Industrial Estate Braintree, Essex CM7 2YW www.sifamtinsley.co.uk Tel: 01376 335271 E-mail: sales@sifamtinsley.com 60 Programmable Multi-function Relay Issue 1.0