Hubble Space Telescope Expert Model Interior Pattern Pieces: Print this document on 32lb paper Complete assembly directions and more information can be found online at www.hubblesite.org/go/model Completed model, exterior (display suggestion) About this model This highly-detailed model of the Hubble Space Telescope is intended for experienced model-builders. This portion represents the internal structure of the telescope, including the mirror and the instrument bay, which fits inside of the external shell. The details of this model are currently based on the telescope s configuration after Servicing Mission 3B in 2002. This project is not appropriate for young children because of the high level of detail and the use of dangerously sharp tools. The estimated completion time is 30 hours. Completed model, interiorr Model design by Ton Noteboom Distributed with permission by Space Telescope Science Institute www.hubblesite.org
Hubble Space Telescope Interior cutaway side view Top Front Secondary mirror assembly When assembling your model, keep track of which pieces are which by only cutting out the pieces you need for the particular part you are assembling, and lightly write the number of the piece in pencil on the back. The parts are in sections labeled according to the part of the telescope they belong to. Although this model can be built on its own, it is attended to accompany the external model of the Hubble Space Telescope and will fit inside of it when both are completed. This document should be printed onto 32-lb (120g) paper, ideally in color. (You may want to have extra printouts handy in case you need them.) The directions (in a separate file) can be printed on regular paper in black-and-white. Support structure Radial science instruments Primary mirror assembly Axial science instruments Fixed-head star tracker (FHST) Pattern scale: This model is designed to be at 1:48 scale relative to the real Hubble Space Telescope. To ensure your model hasn t been resized during printing, measure this scale. Pattern key: Number of the piece that attaches here This piece s number 75 85 85 75 75 84 73 73 52 52 78 78 Cut out along outlines Fold along dashed lines (score before cutting out) Light blue areas are where glue is applied.
1 Axial Instruments Hubble Space Telescope Expert Model Interior Pattern Page 1 2 FHST 40 1 1 9 13 14 9/11 Cut along all double-thick lines to make flaps 20 FHST 35 36 37 23 9 40 36 40 37 40 13 Radial Instruments 24 17 20 17 24 23 4 4 4 4 5 22 6 7 8 21 21 21 18 19 24 23 19 18 24 23 22 22 1 1 1 1
Cut out all sections marked with Radial Instruments 23 24 17 19 Hubble Space Telescope Expert Model Interior Pattern Page 2 Primary Mirror Assembly 43 45 41 51 18 20 18 20 42 17 19 FHST 29 42 26 30 50 27 Cut along all double-thick lines to make flaps 32 33 51 52 Secondary Mirror Assembly 60 61 66 67 68 69 Cut along all double-thick lines to make flaps 63a 62 43 43 44
Hubble Space Telescope Expert Model Interior Pattern Page 3 This page should be glued to cardboard before cutting out the pieces. Cut out all sections marked with Primary Mirror Assembly Axial Instruments 4 15 46 50 49 46 3 16 49 47 optional details 11 14 47 13 49 10 12 48 48 47 70 71 72 73
Hubble Space Telescope Expert Model Interior Pattern Page 4 This page should be glued to cardboard before cutting out the pieces. Cut out all sections marked with Axial Instruments FHST 40 29 37 38 26 35 39 3 2 36 28 21 22 38 31 60 63 64 39 34 53 Support Structure 57 Secondary Mirror 54 58 55 59 56
Hubble Space Telescope Expert Model Exterior Pattern Pieces: Print this document on 32lb paper Complete assembly directions and more information can be found online at www.hubblesite.org/go/model Completed model (display suggestion) About this model This highly detailed model of the Hubble Space Telescope is intended for experienced model-builders. You have the option of also assembling the internal structure of the telescope, including the mirror and the instrument bay, which fits inside the external shell. The details of this model are based on the telescope s configuration after Servicing Mission 3B in 2002. This project is not appropriate for young children because of the high level of detail and the use of dangerously sharp tools. The estimated completion time is 30 hours. Model design by Ton Noteboom Distributed with permission by Space Telescope Science Institute www.hubblesite.org
Hubble Space Telescope front view Forward shield Hubble Space Telescope side view Aperture door Top Solar panels High-gain antenna (HGA) Aft shroud Aperture door Top Front Base Forward shield OTA bays Forward shield Solar panel OTA bays Solar panel Solar panel High-gain antenna High-gain antenna Aft shroud Aft shroud High-gain antenna Base Base When assembling your model, keep track of which pieces are which by only cutting out the pieces you need for the particular part you are assembling, and lightly write the number of the piece in pencil on the back. The parts are in sections color-coded by the part of the telescope they belong to. This document should be printed onto 32-lb (120g) paper, ideally in color. (You may want to have extra printouts handy in case you need them.) The directions (in a separate file) can be printed on regular paper in black-and-white. Pattern scale: This model is designed to be at 1:48 scale relative to the real Hubble Space Telescope. To ensure your model hasn t been resized during printing, measure this scale. Pattern key: Number of the piece that attaches here This piece s number 75 85 85 75 75 84 73 73 52 52 78 78 Cut out along outlines Fold along dashed lines (score before cutting out) Light blue areas are where glue is applied.
Aft shroud Hubble Space Telescope Expert Model Exterior Pattern Page 1 1 20 21 22 23 3 Bay 1 Bay 2 Bay 3 Bay 4 37 36 FGS 1 19 WF/PC2 18 1 2 33 2 4 24 25 26 27 28 29 Bay 5 Bay 6 Bay 7 Bay 8 Bay 9 Bay 10 FGS 3 17 FGS 2 16 2 1
Hubble Space Telescope Expert Model Exterior Pattern Page 2 31 32 6 8 10 12 14 aft scuff plates 36 37 36a 37a 38 39 Aft shroud 99 HGA clamps 52 52 99 98 52 52 101 100 98 Forward shield 101 100 solar panel clamps 102 52 52 102 104 105 103 104 solar panel connectors 106 168 110 73 169 108 111 73 112 113 115 114 52 52 112 114 HGA connectors Aft shroud spacers Cut spacers all the way to the edge of the paper.
Forward shield 54 52 Hubble Space Telescope Expert Model Exterior Pattern Page 3 149 148 54 54 147 146 134 134 134 135 135 135 98 99 100 101 102 10 94 94 90 125 90 125 90 125 124 124 124 124 88 88 130 128 91 96 97 145 134 135 53 52 52 126 126 126 126 95 95 115 113 107 83 82 81 80 75 76 77 78 79 10 125 97 4 9
Hubble Space Telescope Expert Model Exterior Pattern Page 4 Forward shield spacers 56 58 60 62 64 66 68 70 71 52
Forward Shield: OTA Bays 85 75 Hubble Space Telescope Expert Model Exterior Pattern Page 5 75 84 86 85 73 78 52 80 75 75 76 80 82 85 85 52 52 82 81 83 82 80 73 73 73 81 81 73 83 85 52 52 85 84 81 83 77 79 52 86 86 52 73 77 77 79 73 68 73 73 76 77 79 86 52 86 52 78 76 78 82 78
Cut out all sections marked with Hubble Space Telescope Expert Model Exterior Pattern Page 6 48 49 Forward Scuff Plates 142 50 51 143 46 Base Forward Shield: Door 152 Solar Panels 150 151 148 149 156 152b 166 168 169 HGA dishes 184 187 182 185 167 183 186
Solar Panels Hubble Space Telescope Expert Model Exterior Pattern Page 7 161 162 159 160 159 160 159 160 159 160
Hubble Space Telescope Expert Model Exterior Pattern Page 8 This page should be folded in half along the dotted line and glued together before cutting out the pieces. Aft shroud 31 32 NICMOS 35 36 20 21 22 23 24 30 16 17 83x 25 26 27 28 29 82x 81x 80x OTA bays (optional) 75x 76x 77x 78x 79x 18 19
This page should be glued to cardboard before cutting out the pieces. Cut out all sections marked with Forward Shield 117 116 120 HGA hinge 116 120 121 Hubble Space Telescope Expert Model Exterior Pattern Page 9 Aft Shroud 5 119 122 118 30 118 122 solar panel connectors 107 106 108 109 123 solar panel clamps 103 105 magnetic torquers 126 125 7 127 124 NICMOS 33 35 34
This page should be glued to cardboard before cutting out the pieces. Cut out all sections marked with Forward Shield Grapple attachment 128 132 Hubble Space Telescope Expert Model Exterior Pattern Page 10 Aft Shroud 9 130 133 129 131 132 133 134 Forward scuff plates 135 11 136 142 137 138 139 143 140 141 Handrails (optional) 74 40
This page should be glued to cardboard before cutting out the pieces. Cut out all sections marked with Hubble Space Telescope Expert Model Exterior Pattern Page 11 Aft Shroud Solar panels 157 13 15 174 176 170 High Gain Antenna (HGA) 175 177 171 178 179 180 181 172 173
This page should be glued to cardboard before cutting out the pieces. Cut out all sections marked with Solar panels Hubble Space Telescope Expert Model Exterior Pattern Page 12 Forward shield: OTA bays 158 73 110 83 82 111 81 80 78 79 75 76 77 72 162 157 166 163 164 158 167 165
This page should be glued to cardboard before cutting out the pieces. Base 41 95 42 43 96 44 45 Hubble Space Telescope Expert Model Exterior Pattern Page 13 44 44 42 43 44 44 47 97 Forward: Door 150 151 145 144 146 147 153 144 153 152 154 155 94 93 92 91 90 89 Forward shield 88 87 156
Hubble Space Telescope Expert Model Exterior Pattern Page 14 55 This page should be glued to cardboard before cutting 57 out the pieces. Forward shield Cut out all sections marked with 59 61 63 65 67 69