SOLID STATE ELECTRONICS DIGITAL ELECTRONICS SOFT CONDENSED MATTER PHYSICS

Similar documents
CLASS 12th. Semiconductors

Tips and warming up words

Electro - Principles I

Introduction to Transistors. Semiconductors Diodes Transistors

ITT Technical Institute ET215 Devices I Unit 1

SRI VIDYA COLLEGE OF ENGINEERING AND TECHNOLOGY VIRUDHUNAGAR Department of Electronics and Communication Engineering

Lecture (02) Introduction to Electronics II, PN Junction and Diodes I

Introduction to Semiconductor Devices

Atoms? All matters on earth made of atoms (made up of elements or combination of elements).

-: Modern physics:- 02. Assuming the effective radius to be 1.2 fermi, the mass no. of a nucleus with radius 6 fermi, is 1) 8 2) 4 3) 2 4) 6

Introduction to Semiconductor Devices

Lecture (02) PN Junctions and Diodes

Engineering 2000 Chapter 8 Semiconductors. ENG2000: R.I. Hornsey Semi: 1

EE301 Electronics I , Fall

David J. Starling Penn State Hazleton PHYS 214

3C3 Analogue Circuits

Introduction to Semiconductor Physics. Prof.P. Ravindran, Department of Physics, Central University of Tamil Nadu, India

EE 446/646 Photovoltaic Devices I. Y. Baghzouz

First-Hand Investigation: Modeling of Semiconductors

PN Junction

A SEMICONDUCTOR DIODE. P-N Junction

Concept of Core IENGINEERS- CONSULTANTS LECTURE NOTES SERIES ELECTRONICS ENGINEERING 1 YEAR UPTU. Page 1

CLASS 1 & 2 REVISION ON SEMICONDUCTOR PHYSICS. Reference: Electronic Devices by Floyd

Electronic PRINCIPLES

electronics fundamentals

Diodes. EE223 Digital & Analogue Electronics Derek Molloy 2012/2013.

EC/EE DIGITAL ELECTRONICS

Higher Physics. Electricity. Summary Notes. Monitoring and measuring a.c. Current, potential difference, power and resistance

LECTURE 23. MOS transistor. 1 We need a smart switch, i.e., an electronically controlled switch. Lecture Digital Circuits, Logic

FREQUENTLY ASKED QUESTIONS February 21, 2017

BASIC ELECTRONICS CONDUCTION IN SEMICONDUCTORS

Electronic Circuits for Mechatronics ELCT 609 Lecture 2: PN Junctions (1)

DO PHYSICS ONLINE ELECTRIC CURRENT FROM IDEAS TO IMPLEMENTATION ATOMS TO TRANSISTORS ELECTRICAL PROPERTIES OF SOLIDS

Session 0: Review of Solid State Devices. From Atom to Transistor

Lecture 1. OUTLINE Basic Semiconductor Physics. Reading: Chapter 2.1. Semiconductors Intrinsic (undoped) silicon Doping Carrier concentrations

Unit IV Semiconductors Engineering Physics

SEMICONDUCTORS. Conductivity lies between conductors and insulators. The flow of charge in a metal results from the

Conductivity and Semi-Conductors

Molecules and Condensed Matter

Contents CONTENTS. Page 2 of 47

Semiconductors 1. Explain different types of semiconductors in detail with necessary bond diagrams. Intrinsic semiconductors:

Semi-Conductors insulators semi-conductors N-type Semi-Conductors P-type Semi-Conductors

Semiconductor Detectors

Electronics EC /2/2012. * In-class exams: 40% 7 th week exam 25% 12 th week exam 15%

Qualitative Picture of the Ideal Diode. G.R. Tynan UC San Diego MAE 119 Lecture Notes

REVISED HIGHER PHYSICS REVISION BOOKLET ELECTRONS AND ENERGY

Electronics The basics of semiconductor physics

Introduction to Electronics and Semiconductor

16EC401 BASIC ELECTRONIC DEVICES UNIT I PN JUNCTION DIODE. Energy Band Diagram of Conductor, Insulator and Semiconductor:

NUCLEAR PHYSICS, RADIOACTIVITY AND SOLID STATE PHYSICS, ELEMENTARY PARTICLES, DIGITAL ELECTRONICS AND SOFT CONDENSED MATTER PHYSICS QUESTION BANK.

KATIHAL FİZİĞİ MNT-510

Electronic Circuits 1. Transistor Devices. Contents BJT and FET Characteristics Operations. Prof. C.K. Tse: Transistor devices

Introduction to Engineering Materials ENGR2000. Dr.Coates

Semiconductors (Chất1bán1dẫn)

Modern Electronics CHAPTER 24 PHYSICS IN ACTION

Semiconductor Physics

smal band gap Saturday, April 9, 2011

ESE370: Circuit-Level Modeling, Design, and Optimization for Digital Systems

EXTRINSIC SEMICONDUCTOR

CME 300 Properties of Materials. ANSWERS: Homework 9 November 26, As atoms approach each other in the solid state the quantized energy states:

Chem 481 Lecture Material 3/20/09

Semiconductor Physics fall 2012 problems

ECE 335: Electronic Engineering Lecture 2: Semiconductors

Lecture 3b. Bonding Model and Dopants. Reading: (Cont d) Notes and Anderson 2 sections

Digital Electronics Part II - Circuits

Processing of Semiconducting Materials Prof. Pallab Banerji Department of Material Science Indian Institute of Technology, Kharagpur

Semiconductor Physics fall 2012 problems

Prepared by: B.ELANGOVAN. M.Sc., M.Ed., M.Phil.,

SEMICONDUCTOR DIODE. Unbiased (non-polarized) PN junction

ECE-342 Test 2 Solutions, Nov 4, :00-8:00pm, Closed Book (one page of notes allowed)

Misan University College of Engineering Electrical Engineering Department. Exam: Final semester Date: 17/6/2017

Basic Semiconductor Physics

Diodes. anode. cathode. cut-off. Can be approximated by a piecewise-linear-like characteristic. Lecture 9-1

Most matter is electrically neutral; its atoms and molecules have the same number of electrons as protons.

ESE370: Circuit-Level Modeling, Design, and Optimization for Digital Systems

For their 1948 discovery of the transistor, John Bardeen, Walter Brattain, and William Shockley were awarded the 1956 Nobel prize in physics.

Chap. 11 Semiconductor Diodes

UNIVERSITY OF CALIFORNIA, BERKELEY College of Engineering Department of Electrical Engineering and Computer Sciences

Chemistry Instrumental Analysis Lecture 8. Chem 4631

Semiconductor Theory and Devices

ELECTRONIC DEVICES AND CIRCUITS SUMMARY

n N D n p = n i p N A

Chapter 1 INTRODUCTION SEMICONDUCTORS MATERIAL

ISSUES TO ADDRESS...

Digital Electronics Part II Electronics, Devices and Circuits

Chapter 1 Overview of Semiconductor Materials and Physics

Semiconductor Physics Problems 2015

! Previously: simple models (0 and 1 st order) " Comfortable with basic functions and circuits. ! This week and next (4 lectures)

Physics Department. CfE Higher Unit 3: Electricity. Problem Booklet

R. Ludwig and G. Bogdanov RF Circuit Design: Theory and Applications 2 nd edition. Figures for Chapter 6

ELECTRONIC I Lecture 1 Introduction to semiconductor. By Asst. Prof Dr. Jassim K. Hmood

Semiconductor Devices and Circuits Fall Midterm Exam. Instructor: Dr. Dietmar Knipp, Professor of Electrical Engineering. Name: Mat. -Nr.

Chapter Modern Physics

For the following statements, mark ( ) for true statement and (X) for wrong statement and correct it.

Electrons in materials. (where are they, what is their energy)

Lecture 2. Introduction to semiconductors Structures and characteristics in semiconductors

They keep the voltage the same and use this circuit to measure the current. Variable resistor. Reading on ammeter in amps

12/10/09. Chapter 18: Electrical Properties. View of an Integrated Circuit. Electrical Conduction ISSUES TO ADDRESS...

Bipolar Junction Transistor (BJT) - Introduction

Section 12: Intro to Devices

Transcription:

SOLID STATE ELECTRONICS DIGITAL ELECTRONICS SOFT CONDENSED MATTER PHYSICS

The energy band occupied by the valence electrons is called valence band and is the highest filled band. Bnd occupied by the electrons coming from the valence band is called conduction band. It is either empty or partially filled and lies above the valence band. The minimum energy required by an electron to jump from valance band to conduction band is equal to the forbidden energy gap.

Conductors:In conductors the valence and conduction band overlap on each other such that forbidden energy gap is not there.the electrons in the overlapping region are called conduction electrons. Insulator:In insulators the valence band is completely filled and conduction band is empty and both bands are separated by a forbidden energy gap of 7eV.

Semiconductor: semiconductors are the materials in which the forbidden energy gap between valence and conduction band is very small. Examples are germanium(eg=0.72ev) and silicon(eg=1ev). The pure semiconductors are called intrinsic semiconductor where as those having some specific impurity are called extrinsic semiconductor. the process of adding impurities to semiconductors is called doping.

The pure semiconductors are called intrinsic semiconductor where as those having some specific impurity are called extrinsic semiconductor.

The pure semiconductors are called intrinsic semiconductor where as those having some specific impurity are called extrinsic semiconductor.

n type semiconductor: when pentavalent impurity is added to pure germanium or silicon crystal we get an extrinsic semiconductor known as n type semiconductor. p type semiconductor: when trivalent impurity is added to pure germanium or silicon we get p type semiconductor The boundary dividing the two halves of such a semiconductor is called a junction and the arrangement is known as p n junction diode.

The region around the junction containing immobile +ve and ve charges is known as depletion region. Symbol of diode: PHYSICS When a battery or emf greater than the barrier potential is connected in such a way that +ve terminal is connected to p side and ve terminal of battery is connected to n side the diode is said to be in forward bias condition.

Diode as half wave rectifier: f

Diode as full wave rectifier: During +Ve half cycle f During -Ve half cycle

Junction transistor is a 3 terminal Semiconductor. It is formed when a thin layer of one type of extrinsic semiconductor is sandwitched between 2 thick layers of other type of extrinsic semiconductor. 2 Types namely npn and pnp whose symbols are as shown

An intermediate state structure called liquid crystal appears b/w the crystalline solid state at low temperature and the ordinary liquid state at high temperature. gel:dispersion medium is solid,dispersed phase is liquid. An emulsion is a colloidal dispersion in which 2 immisible liquids are used as dispersed phase and dispersed medium

Boolean algebra:this algebra allows only 2 states for a variable.these states are represented as high (1) or low(0). The OR operation is represented as y= a+b =a OR b The AND operation is represented as y=a AND b=a.b The NOT operation is y=not a

NAND,NOR gate are called universal logic gates.which are complementery operation of AND and OR respectively. Half adder is logic circuit which adds 2 bits at a time. Full adder is a circuit which adds 3 bits at a time.

The bands in which an electron cannot lie in a crystal 1. Valence band 2. Forbidden band 3. Conduction band 4. In all energy bands

Answer (2) f

The conduction electrons have greater mobility than that of holes because 1) They are lighter 2) They carry ve charge 3) Need less energy for movement 4) Experience less collision

Answer (3) PHYSICS

A piece of copper and germanium are cooled from room temperature to 100K. What happens to their resistivity? 1) Decreases in both 2) Increases in both 3) Increases in copper & decreases in germanium PHYSICS 4) Decreases in copper & increases in germanium

Answer (4) Temperature coefficient for copper is positive and that for germanium is negative.

In the depletion region of p-n junction there is a shortage of.. 1) Acceptor ions 2) Donor ions 3) Holes and electrons 4) None of the above

Answer (3) PHYSICS

At room temperature an intrinsic semiconductor has 1. Many free electrons only 2. A few free electrons and holes 3. No free electrons and holes 4. Many holes only

Answer (2) PHYSICS

For a transistor the α and β values are as follows. 1) αβ=1 2) α<1 and β>1 3) α>1 and β<1 4) None of the above

Answer (2) PHYSICS

p-n junction diode acts as insulator. if connected... 1) In reverse bias 2) To ac source 3) In forward bias 4) Either to ac source or in reverse bias

Answer (1) In reverse bias condition depletion region increases resulting in the increase of resistance.

Which type of liquid crystals used to prepare holograms? 1.Cholesteric 2.Smectic A 3.Smectic C 4.Nematic

Answer (1) PHYSICS

Half adder is the combination of the following 1) AND and XOR gates 2) AND and OR gates 3) XOR and NOT gates 4) XOR and OR gates

Answer (1) Half adder is given as:

Which of the following is not the function of NOT gate 1) Complement signal 2) Stop a signal 3) Invert an input signal 4) Change the logic level of the digital circuit

Answer (2) The output of NOT gate is 1 when input is 0,when input is 0 output is 1.Hence except (2) all answers are correct.

In a transistor the base is... 1) An insulator 2) An extrinsic semiconductor 3) A conductor of high resistance 4) A conductor of low resistance

Answer (2) PHYSICS

The energy band gap between conduction band and the valence band in a material is 0.7eV. It is... 1) A metal 2) An insulator 3) An alloy 4) A semiconductor

Answer (4) Energy gap of semiconductor is approximately 1eV.

A colloidal state in which a gas is dispersed in a liquid or a solid is. 1) gel 2) Liquid crystal 3) foam 4) emulsion

Answer (3) PHYSICS

The main distinction between conductors, semiconductors and insulator is 1)Binding energy of electrons 2)Work function PHYSICS 3)Width of forbidden band 4)Temperature coefficient of resistance

Answer (3) PHYSICS

The Boolean equation for the given logic circuit is a b Y 1) Y=a AND b 2) Y=a OR b 3) Y=a XOR b 4) Y=a NAND b

Answer (1) PHYSICS

In which of the following cases the diode is forward biased

Answer (4) PHYSICS

Minority carriers present in a p- type semi conductor are due to 1. Bias voltage PHYSICS 2. Thermal agitation 3. Addition of impurities 4. Ionisation of impurities

Answer(2) PHYSICS

A Nematic liquid crystalline phase has.. 1) Position order only 2) Orientational order only 3)Both Orientational and positional order 4) All the above

Answer (2) PHYSICS

The reverse biasing in a junction diode 1)Decreases the potential barrier 2)Increases the potential barrier 3)Increases the number of minority charge carriers 4) Increases the number of majority charge carriers

Answer (2) PHYSICS

Phase angle between input and output signals in a CE amplifier in degrees is 1. 180 2. 45 3. 90 4. 0 PHYSICS

Answer (1) In CE amplifier we take output across the emitter. Hence output and input signals differ by a value of 180 degrees

In which of the following states of matter the majority of crystalline substances generally exist? 1) liquid 2) solid 3) foam 4) plasma

Answer (2) PHYSICS

When the conductivity of a semiconductor is only due to the breaking of covalent bond,then the semiconductor is 1. Extrinsic 2. Donor 3. intrinsic 4. acceptor PHYSICS

Answer (3) PHYSICS

To a germanium crystal equal number of aluminium and arsenic atoms are added. Then... 1) It becomes an insulator 2) It remains as intrinsic semiconductor 3) It becomes a superconductor 4) All the above PHYSICS

Answer (2) PHYSICS

Which of the following is called universal gate. 1) AND 2) OR 3) XOR 4)NAND

Answer (4) NAND, gate is called universal gate because any basic gate can be constructed using above gate.

Identify the logic operation performed by the circuit shown. 1) OR 2) AND 3) NAND 4) NOT

Answer (3) put 1, 1 for A and B Gate 1 gives 0 Gate 2 gives 0 2 Gate 3 gives 1 Thus 1 is given to last NOR gate to get Q=0.Thus the given system behaves as NAND gate. 1 3

Milk is emulsion in which 1) Fat is dispersed medium, water is dispersion medium 2) Both fat and water are dispersed medium 3) Water is dispersed medium, fat is dispersion medium 4) None of the above

Answer (1) PHYSICS

Hole in a p-type semiconductor is. PHYSICS 1) An excess electron 2) A missing atom 3) A missing electron 4) A donor level

Answer (3) PHYSICS

Which of the following is the operation of NOR gate.. 1) 1 NOR 1=0 2) 1 NOR 0=1 3) 0 NOR 0=0 4) None of the above

Answer (1) PHYSICS

True statement for AND gate is 1) It has no equivalent to switching circuit 2) It is equivalent to series switching circuit 3) It is equivalent to parallel switching circuit 4) None of the above

Answer(2) PHYSICS

The forbidden energy band gap in conductors, semiconductors and insulators are E1,E2,E3 respectively..then which relation is true... 1) E1=E2=E3 2) E1<E2<E3 3) E1>E2>E3 4) E1<E2>E3 PHYSICS

Answer (2) PHYSICS

A half wave rectifier is being used to rectify an ac voltage of frequency 50Hz.The number of pulses of rectified current obtained in 1 second is... 1) 50 2) 100 3) 25 4) 150 PHYSICS

Answer (1) PHYSICS

A transistor has α = 0.99.then β is.. 1)0.95 2)1.5 3)19 4)25 PHYSICS

Answer (3) We have the relation β=α/(1- α) for the given question 0.95/(1-0.95) =19

What is the final output of given logic circuit, if the input for first 2 NAND gates is 1... 1. 1 2. 0 3. 0 or 1 4. Not possible to say PHYSICS

Answer (2) 1 1 1 0 1 0 1 0 1

The truth table shown here belongs to which of the following logic gates 1) NOR 2) OR 3) AND 4) XOR PHYSICS

Answer (4) Since the output is 0 for same combination Of input and is 1 for different combination,it Is the truth table of XOR gate.

At 0K,intrinsic semiconductor behaves as... 1) A perfect conductor 2) A perfect insulator 3) A semiconductor 4) A super conductor

Answer (2) PHYSICS

What is the output expression for given logic circuit... 1)(A+B)+BC 2) (B+C) A 3)AC+BC 4)AC(B+A) PHYSICS

Answer (1) PHYSICS

Which of the following when added as a impurity to the silicon produces the n type semiconductor? 1)P 2)Al 3)Mg 4)B PHYSICS

Answer (1) PHYSICS

One serious drawback of semiconductor devices is... 1. They do not last for long time 2. They pollute the environment 3. They are costly 4. They can t be used with high voltages

Answer (4) PHYSICS

The electrical circuits used to get smooth DC from rectifier circuit is 1. Full wave rectifier 2. Amplifier 3. Oscillator 4. filter

Answer(4) PHYSICS

If l1, and are the lengths of l2 l3 the emitter, base and collector of a transistor then 1. l3 < l2>l1 2. l3 =l2=l1 3. l3 >l1>l2 4. l3 <l1<l2

Answer(3) PHYSICS

THANK YOU