Lecture Presentation Chapter 16 Aqueous Ionic Equilibrium Sherril Soman Grand Valley State University
The Danger of Antifreeze Each year, thousands of pets and wildlife species die from consuming antifreeze. Most brands of antifreeze contain ethylene glycol. Sweet taste Initial effect drunkenness Metabolized in the liver to glycolic acid HOCH 2 COOH
Why Is Glycolic Acid Toxic? In high enough concentration in the bloodstream, glycolic acid overwhelms the buffering ability of the HCO 3 in the blood, causing the blood ph to drop. Low blood ph compromises its ability to carry O 2. Acidosis HbH + (aq) + O 2 (g) HbO 2 (aq) + H + (aq) One treatment is to give the patient ethyl alcohol, which has a higher affinity for the enzyme that catalyzes the metabolism of ethylene glycol.
Buffer Solutions Resist changes in ph when an acid or base is added. Act by neutralizing acid or base that is added to the buffered solution. Contain either Significant amounts of a weak acid and its conjugate base Significant amounts of a weak base and its conjugate acid Blood has a mixture of H 2 CO 3 and HCO 3
Making an Acidic Buffer Solution It must contain significant amounts of both a weak acid and its conjugate base.
An Acidic Buffer Solution If a strong base is added, it is neutralized by the weak acid (HC 2 H 3 O 2 ) in the buffer. NaOH(aq) + HC 2 H 3 O 2 (aq) H 2 O(l) + NaC 2 H 3 O 2 (aq) If the amount of NaOH added is less than the amount of acetic acid present, the ph change is small.
An Acidic Buffer Solution If a strong acid is added, it is neutralized by the conjugate base (NaC 2 H 3 O 2 ) in the buffer. HCl(aq) + NaC 2 H 3 O 2 HC 2 H 3 O 2 (aq) + NaCl(aq) If the amount of HCl is less than the amount of NaC 2 H 3 O 2 present, the ph change is small.
How Acid Buffers Work: Addition of Base HA (aq) + H 2 O (l) A (aq) + H 3 O + (aq) Buffers work by applying Le Châtelier s principle to weak acid equilibrium. Buffer solutions contain significant amounts of the weak acid molecules, HA. These molecules react with added base to neutralize it. HA(aq) + OH (aq) A (aq) + H 2 O(l) You can also think of the H 3 O + combining with the OH to make H 2 O; the H 3 O + is then replaced by the shifting equilibrium.
How Buffers Work new A H 2 O HA A HA A + H 3O + Added HO
How Acid Buffers Work: Addition of Acid HA (aq) + H 2 O (l) A (aq) + H 3 O + (aq) The buffer solution also contains significant amounts of the conjugate base anion, A. These ions combine with added acid to make more HA. H + (aq) + A (aq) HA(aq) After the equilibrium shifts, the concentration of H 3 O + is kept constant.
How Buffers Work new HA H 2 O A HA A + H 3O + Added H 3 O +
Common Ion Effect HA (aq) + H 2 O (l) A (aq) + H 3 O + (aq) Adding a salt containing the anion NaA, which is the conjugate base of the acid (the common ion), shifts the position of equilibrium to the left. This causes the ph to be higher than the ph of the acid solution, lowering the H 3 O + ion concentration.
Common Ion Effect
Henderson Hasselbalch Equation An equation derived from the K a expression that allows us to calculate the ph of a buffer solution. The equation calculates the ph of a buffer from the pk a and initial concentrations of the weak acid and salt of the conjugate base, as long as the x is small approximation is valid.
Deriving the Henderson Hasselbalch Equation Consider the equilibrium expression for a generic acidic buffer: Solving for H 3 O + we have the following:
Deriving the Henderson Hasselbalch Equation Taking the logarithm of both sides and expanding since log (AB) = log A + log B
Deriving the Henderson Hasselbalch Equation HA(aq) + H 2 O(l) H 3 O + (aq) + A (aq) Multiplying both sides by 1 and rearranging we get the following: log[h 3 O + ] = logk a + log([a ]/[HA) (see page 758)
Deriving the Henderson Hasselbalch Equation HA(aq) + H 2 O(l) H 3 O + (aq) + A - (aq) Since ph = log[h 3 O + ] and pk a = logk a ph = pk a + log([a ]/[HA) (see page 758) We can then generalize as follows:
Do I Use the Full Equilibrium Analysis or the Henderson Hasselbalch Equation? The Henderson Hasselbalch equation is generally good enough when the x is small approximation is applicable. Generally, the x is small approximation will work when both of the following are true: a) The initial concentrations of acid and salt are not very dilute. b) The K a is fairly small. For most problems, this means that the initial acid and salt concentrations should be over 100 to 1000 times larger than the value of K a.
How Much Does the ph of a Buffer Change When an Acid or Base Is Added? Calculating the new ph after adding acid or base requires breaking the problem into two parts: 1. A stoichiometry calculation for the reaction of the added chemical with one of the ingredients of the buffer to reduce its initial concentration and increase the concentration of the other. Added acid reacts with the A to make more HA Added base reacts with the HA to make more A 2. An equilibrium calculation of [H 3 O + ] using the new initial values of [HA] and [A ]
Action of a Buffer Figure 16.3 pg 762
Basic Buffers B: (aq) + H 2 O (l) H:B + (aq) + OH (aq) Buffers can also be made by mixing a weak base, (B:), with a soluble salt of its conjugate acid, H:B + Cl H 2 O (l) + NH 3(aq) NH 4 + (aq) + OH (aq)
Henderson Hasselbalch Equation for Basic Buffers The Henderson Hasselbalch equation is written for a chemical reaction with a weak acid reactant and its conjugate base as a product. The chemical equation of a basic buffer is written with a weak base as a reactant and its conjugate acid as a product. B: + H 2 O H:B + + OH To apply the Henderson Hasselbalch equation, the chemical equation of the basic buffer must be looked at like an acid reaction. H:B + + H 2 O B: + H 3 O + This does not affect the concentrations, just the way we are looking at the reaction.
Relationship between pk a and pk b Just as there is a relationship between the K a of a weak acid and K b of its conjugate base, there is also a relationship between the pk a of a weak acid and the pk b of its conjugate base. K a K b = K w = 1.0 x 10 14 log(k a K b ) = log(k w ) = 14 log(k a ) + log(k b ) = 14 pk a + pk b = 14
Henderson Hasselbalch Equation for Basic Buffers The Henderson Hasselbalch equation is written for a chemical reaction with a weak acid reactant and its conjugate base as a product. The chemical equation of a basic buffer is written with a weak base as a reactant and its conjugate acid as a product. B: + H 2 O H:B + + OH We can rewrite the Henderson Hasselbalch equation for the chemical equation of the basic buffer in terms of poh.
Buffering Effectiveness A good buffer should be able to neutralize moderate amounts of added acid or base. However, there is a limit to how much can be added before the ph changes significantly. The buffering capacity is the amount of acid or base a buffer can neutralize. The buffering range is the ph range the buffer can be effective. The effectiveness of a buffer depends on two factors (1) the relative amounts of acid and base, and (2) the absolute concentrations of acid and base.
Buffering Capacity A concentrated buffer can neutralize more added acid or base than a dilute buffer.
Effectiveness of Buffers A buffer will be most effective when the [base]:[acid] = 1. Equal concentrations of acid and base A buffer will be effective when 0.1 < [base]:[acid] < 10. A buffer will be most effective when the [acid] and the [base] are large.
Buffering Range We have said that a buffer will be effective when 0.1 < [base]:[acid] < 10. Substituting into the Henderson Hasselbalch equation we can calculate the maximum and minimum ph at which the buffer will be effective. Lowest ph Highest ph Therefore, the effective ph range of a buffer is pk a ± 1. When choosing an acid to make a buffer, choose one whose pk a is closest to the ph of the buffer.
Buffering Capacity Buffering capacity is the amount of acid or base that can be added to a buffer without causing a large change in ph. The buffering capacity increases with increasing absolute concentration of the buffer components.
Buffering Capacity As the [base]:[acid] ratio approaches 1, the ability of the buffer to neutralize both added acid and base improves. Buffers that need to work mainly with added acid generally have [base] > [acid]. Buffers that need to work mainly with added base generally have [acid] > [base].
Titration In an acid base titration, a solution of unknown concentration (titrant) is slowly added to a solution of known concentration from a burette until the reaction is complete. When the reaction is complete we have reached the endpoint of the titration. An indicator may be added to determine the endpoint. An indicator is a chemical that changes color when the ph changes. When the moles of H 3 O + = moles of OH, the titration has reached its equivalence point.
Titration
Titration Curve It is a plot of ph versus the amount of added titrant. The inflection point of the curve is the equivalence point of the titration. Prior to the equivalence point, the known solution in the flask is in excess, so the ph is closest to its ph. The ph of the equivalence point depends on the ph of the salt solution. Equivalence point of neutral salt, ph = 7 Equivalence point of acidic salt, ph < 7 Equivalence point of basic salt, ph > 7 Beyond the equivalence point, the unknown solution in the burette is in excess, so the ph approaches its ph.
Titration Curve: Strong Base Added to Strong Acid
Titration of a Strong Base with a Strong Acid If the titration is run so that the acid is in the burette and the base is in the flask, the titration curve will be the reflection of the one just shown.
Titration of a Weak Acid with a Strong Base Titrating a weak acid with a strong base results in differences in the titration curve at the equivalence point and excess acid region. The initial ph is determined using the K a of the weak acid. The ph in the excess acid region is determined as you would determine the ph of a buffer. The ph at the equivalence point is determined using the K b of the conjugate base of the weak acid. The ph after equivalence is dominated by the excess strong base. The basicity from the conjugate base anion is negligible.
Titrating Weak Acid with a Strong Base The initial ph is that of the weak acid solution. Calculate like a weak acid equilibrium problem For example, 15.5 and 15.6 Before the equivalence point, the solution becomes a buffer. Calculate mol HA init and mol A init using reaction stoichiometry Calculate ph with Henderson Hasselbalch using mol HA init and mol A init Half-neutralization ph = pk a
Titrating Weak Acid with a Strong Base At the equivalence point, the mole HA = mol Base, so the resulting solution has only the conjugate base anion in it before equilibrium is established. Mol A = original mole HA Calculate the volume of added base as you did in Example 4.8. [A ] init = mol A /total liters Calculate like a weak base equilibrium problem For example, 15.14 Beyond equivalence point, the OH is in excess. [OH ] = mol MOH xs/total liters [H 3 O + ][OH ] = 1 10 14
Titration Curve of a Weak Base with a Strong Acid
Titration of a Polyprotic Acid If K a1 >> K a2, there will be two equivalence points in the titration. The closer the K a s are to each other, the less distinguishable the equivalence points are. Titration of 25.0 ml of 0.100 M H 2 SO 3 with 0.100 M NaOH
Monitoring ph During a Titration The general method for monitoring the ph during the course of a titration is to measure the conductivity of the solution due to the [H 3 O + ]. Using a probe that specifically measures just H 3 O + The endpoint of the titration is reached at the equivalence point in the titration at the inflection point of the titration curve. If you just need to know the amount of titrant added to reach the endpoint, we often monitor the titration with an indicator.
Monitoring ph During a Titration Figure 16.10 pg 780
Indicators Many dyes change color depending on the ph of the solution. These dyes are weak acids, establishing an equilibrium with the H 2 O and H 3 O + in the solution. HInd (aq) + H 2 O (l) Ind (aq) + H 3 O + (aq) The color of the solution depends on the relative concentrations of Ind :Hind. When Ind :HInd 1, the color will be a mix of the colors of Ind and HInd. When Ind :HInd > 10, the color will be a mix of the colors of Ind. When Ind :HInd < 0.1, the color will be a mix of the colors of Hind.
Phenolphthalein
Methyl Red
Monitoring a Titration with an Indicator For most titrations, the titration curve shows a very large change in ph for very small additions of titrant near the equivalence point. An indicator can therefore be used to determine the endpoint of the titration if it changes color within the same range as the rapid change in ph. pk a of HInd ph at equivalence point
Acid Base Indicators Table 16.1 pg 783
Solubility Equilibria All ionic compounds dissolve in water to some degree. However, many compounds have such low solubility in water that we classify them as insoluble. We can apply the concepts of equilibrium to salts dissolving, and use the equilibrium constant for the process to measure relative solubilities in water.
Solubility Product The equilibrium constant for the dissociation of a solid salt into its aqueous ions is called the solubility product, K sp. For an ionic solid M n X m, the dissociation reaction is M n X m (s) nm m+ (aq) + mx n (aq). The solubility product would be K sp = [M m+ ] n [X n ] m. For example, the dissociation reaction for PbCl 2 is PbCl 2 (s) Pb 2+ (aq) + 2 Cl (aq). And its equilibrium constant is K sp = [Pb 2+ ][Cl ] 2.
Molar Solubility Solubility is the amount of solute that will dissolve in a given amount of solution at a particular temperature. The molar solubility is the number of moles of solute that will dissolve in a liter of solution. The molarity of the dissolved solute in a saturated solution For the general reaction M n X m (s) nm m+ (aq) + mx n (aq)
K sp and Relative Solubility Molar solubility is related to K sp. But you cannot always compare solubilities of compounds by comparing their K sp s. To compare K sp s, the compounds must have the same dissociation stoichiometry.
The Effect of Common Ion on Solubility Addition of a soluble salt that contains one of the ions of the insoluble salt, decreases the solubility of the insoluble salt. For example, addition of NaCl to the solubility equilibrium of solid PbCl 2 decreases the solubility of PbCl 2. PbCl 2 (s) Pb 2+ (aq) + 2 Cl (aq) Addition of Cl shifts the equilibrium to the left.
The Effect of ph on Solubility For insoluble ionic hydroxides, the higher the ph, the lower the solubility of the ionic hydroxide. And the lower the ph, the higher the solubility Higher ph = increased [OH ] M(OH) n (s) M n+ (aq) + noh (aq) For insoluble ionic compounds that contain anions of weak acids, the lower the ph, the higher the solubility. M 2 (CO 3 ) n (s) 2 M n+ (aq) + nco 2 3 (aq) H 3 O + (aq) + CO 2 3 (aq) HCO 3 (aq) + H 2 O(l)
Precipitation Precipitation will occur when the concentrations of the ions exceed the solubility of the ionic compound. If we compare the reaction quotient, Q, for the current solution concentrations to the value of K sp, we can determine if precipitation will occur. Q = K sp, the solution is saturated, no precipitation. Q < K sp, the solution is unsaturated, no precipitation. Q > K sp, the solution would be above saturation, the salt above saturation will precipitate. Some solutions with Q > K sp will not precipitate unless disturbed; these are called supersaturated solutions.
Precipitation Image top right of page 789 Precipitation occurs if Q > K sp. A supersaturated solution will precipitate if a seed crystal is added.
Selective Precipitation A solution containing several different cations can often be separated by addition of a reagent that will form an insoluble salt with one of the ions, but not the others. A successful reagent can precipitate with more than one of the cations, as long as their K sp values are significantly different.
Qualitative Analysis An analytical scheme that utilizes selective precipitation to identify the ions present in a solution is called a qualitative analysis scheme. Wet chemistry A sample containing several ions is subjected to the addition of several precipitating agents. Addition of each reagent causes one of the ions present to precipitate out.
Qualitative Analysis
A General Qualitative Analysis Scheme Figure 16.16 pg 118
Group 1 Group one cations are Ag +, Pb 2+, and Hg 2+ 2. All these cations form compounds with Cl that are insoluble in water. As long as the concentration is large enough PbCl 2 may be borderline Molar solubility of PbCl 2 = 1.43 10 2 M Precipitated by the addition of HCl
Group 2 Group two cations are Cd 2+, Cu 2+, Bi 3+, Sn 4+, As 3+, Pb 2+, Sb 3+, and Hg 2+. All these cations form compounds with HS and S 2 that are insoluble in water at low ph. Precipitated by the addition of H 2 S in HCl.
Group 3 Group three cations are Fe 2+, Co 2+, Zn 2+, Mn 2+, Ni 2+ precipitated as sulfides, as well as Cr 3+, Fe 3+, and Al 3+ precipitated as hydroxides. All these cations form compounds with S 2 that are insoluble in water at high ph. Precipitated by the addition of H 2 S in NaOH.
Group 4 Group four cations are Mg 2+, Ca 2+, Ba 2+. All these cations form compounds with PO 3 4 that are insoluble in water at high ph. Precipitated by the addition of (NH 4 ) 2 HPO 4.
Group 5 Group five cations are Na +, K +, NH 4+. All these cations form compounds that are soluble in water they do not precipitate. They are identified by the color of their flame.
Complex Ion Formation Transition metals tend to be good Lewis acids. They often bond to one or more H 2 O molecules to form a hydrated ion. H 2 O is the Lewis base, donating electron pairs to form coordinate covalent bonds. Ag + (aq) + 2 H 2 O(l) Ag(H 2 O) 2+ (aq) Ions that form by combining a cation with several anions or neutral molecules are called complex ions. For example, Ag(H 2 O) 2 + The attached ions or molecules are called ligands. For example, H 2 O
Complex Ion Equilibria If a ligand is added to a solution that forms a stronger bond than the current ligand, it will replace the current ligand. Ag(H 2 O) + 2 (aq) + 2 NH 3(aq) Ag(NH 3 ) + 2 (aq) + 2 H 2 O (l) Generally, H 2 O is not included, because its complex ion is always present in aqueous solution. Ag + (aq) + 2 NH 3(aq) Ag(NH 3 ) + 2 (aq)
Formation Constant The reaction between an ion and ligands to form a complex ion is called a complex ion formation reaction. Ag + (aq) + 2 NH 3(aq) Ag(NH 3 ) + 2 (aq) The equilibrium constant for the formation reaction is called the formation constant, K f.
Formation Constants
The Effect of Complex Ion Formation on Solubility The solubility of an ionic compound that contains a metal cation that forms a complex ion increases in the presence of aqueous ligands. AgCl (s) Ag + (aq) + Cl (aq) K sp = 1.77 10 10 Ag + (aq) + 2 NH 3(aq) Ag(NH 3 ) + 2 (aq) K f = 1.7 10 7 Adding NH 3 to a solution in equilibrium with AgCl (s) increases the solubility of Ag +.
Figure 16.18
Solubility of Amphoteric Metal Hydroxides Many metal hydroxides are insoluble. All metal hydroxides become more soluble in acidic solution. Shifting the equilibrium to the right by removing OH Some metal hydroxides also become more soluble in basic solution. Acting as a Lewis base forming a complex ion Substances that behave as both an acid and base are said to be amphoteric. Some cations that form amphoteric hydroxides include Al 3+, Cr 3+, Zn 2+, Pb 2+, and Sb 2+.
Al 3+ Al 3+ is hydrated in water to form an acidic solution. Al(H 2 O) 3+ 6 (aq) + H 2 O (l) Al(H 2 O) 5 (OH) 2+ (aq) + H 3 O + (aq) Addition of OH drives the equilibrium to the right and continues to remove H from the molecules. Al(H 2 O) 5 (OH) 2+ (aq) + OH (aq) Al(H 2 O) 4 (OH) 2 + (aq) + H 2 O (l) Al(H 2 O) 4 (OH) 2 + (aq) + OH (aq) Al(H 2 O) 3 (OH) 3(s) + H 2 O (l)
Solubility of an Amphoteric Hydroxide