FAGOR 8055 CNC Ordering Handbook. Ref. 0801

Similar documents
FAGOR 8055 CNC Ordering Handbook. Ref. 1502

FAGOR 8055i CNC Ordering Handbook. Ref. 1502

All-in-one or BOX industrial PC for autonomous or distributed applications

The Ordering Code for various standard model Recorders with an AC supply and without any additional options are as follows:

473-SHX Dew Point Mirror

Administrivia. Course Objectives. Overview. Lecture Notes Week markem/cs333/ 2. Staff. 3. Prerequisites. 4. Grading. 1. Theory and application

xlogic SuperRelay is a compact and expandable CPU replacing mini PLCs, multiple timers, relays and counters.

Release notes for measuring cycles, software version

TitriSoft 2.5. Content

Acceleration/Velocity/Displacement VIBRATION METER

473 Dew Point Hygrometer

ww.padasalai.net

Hands-on Lab 3. System Identification with Experimentally Acquired Data

SYNCHROMASTER HYDRAULIC PRESSBRAKES

473 Dew Point Hygrometer

Pascal ET is an handheld multifunction calibrator for the measurement and simulation of the following parameters: - pressure

Remote Display Unit. Installers Handbook Copyright 2001 AirSense Technology Ltd. LM Remote Display Unit Installers Handbook Issue 1.

MODEL: CNC-HC60Q PRODUCT SPECIFICATION

Acceleration, Velocity, Separate probe VIBRATION METER Model : VB-8202

Information Technology Solutions Neptune Datasheet

WEATHER STATION FOR SOLAR FARM MONITORING

Small Panel with matrix screen

TOPCNC TC55V Instruction Manual

Minute Impulse Clock Controller I01DN

SC125MS. Data Sheet and Instruction Manual. ! Warning! Salem Controls Inc. Stepper Motor Driver. Last Updated 12/14/2004

NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT

MODEL: CNC-C600 PRODUCT SPECIFICATION

Mark Redekopp, All rights reserved. Lecture 1 Slides. Intro Number Systems Logic Functions

Compact Titration. Compact Titrator G20. One Click Titration Simple & Dependable

Calibration Routine. Store in HDD. Switch "Program Control" Ref 1/ Ref 2 Manual Automatic

Multi-function, economical instrument with 4 functions in the same casing. Accessibility and safety: large-dimension terminals Insulated circuits

0501 Users Guide. Chapter I Characteristic

32 Input AC Block I/O Module

SmartDairy Catalog HerdMetrix Herd Management Software

Developing IoT-Based Factory Automation Using F-RAM

Tracking board design for the SHAGARE stratospheric balloon project. Supervisor : René Beuchat Student : Joël Vallone

A small but EFFICIENT collaboration for the Spiral2 control system development

VIBRATION METER Acceleration & Velocity Model : VB-8201HA

Trunnion Hook-up (Tilt & Rotary = Full Axis)

STA Compact The reliable analysis

EXPLORING FARADAY S LAW

16 Input AC Block I/O Module

STUDENT EXPERIMENTS PHYSICS, CHEMISTRY & BIOLOGY

Digital Systems Roberto Muscedere Images 2013 Pearson Education Inc. 1

Nobeltec TimeZero V2.0.2

Lecture 3, Performance

Electronic Edge Finder Run-out Compensation, Version 1.0

Lecture 3, Performance

TEPZZ A T EP A2 (19) (11) EP A2 (12) EUROPEAN PATENT APPLICATION. (51) Int Cl.: H02M 7/483 ( )

Large Vertical Turning Center with RAM Head Spindle

ONYX -MCE MULTI-CHANNEL OPTICAL FIBER PYROMETERS WITH ACTIVE EMISSIVITY COMPENSATION PRECISION TEMPERATURE MEASUREMENT FOR DEMANDING INDUSTRIAL

O P E R A T I N G M A N U A L

INFORMATION TECHNOLOGY SYSTEMS SPDs FOR 19 TECHNOLOGY. NET Protector Surge Arrester. Protects switches, HUBs and telecommunication

VELA. Getting started with the VELA Versatile Laboratory Aid. Paul Vernon

VMware VMmark V1.1 Results

Circular Motion and Centripetal Force

Smart Sensing Embedded Spectroscopy Platform Botlek studiegroep 06-april-2017

b Physics Prospects For The LHCb Experiment Thomas Ruf for the LHCb Collaboration Introduction Detector Status Physics Program

Petrochemical. Transformer Oil Gas Analysis - TOGA

Drug Testing Solutions INDIKO DRUG TESTING ANALYZER. 1 P F

GIS TECHNICIAN I GIS TECHNICIAN II

COMPONENTS QUICK GUIDE. Micro Encoders

Myron Bowling Auctioneers

TOPCNC TC55V Instruction Manual.


Automatic Dam Control System with Vidyut Cable Saver DI-731 for Automation of Barrage Gates

CHAPTER 6 FRICTION AND WEAR ANALYSIS FOR BUSHING

FEATURES: CAM-TC CAM-TCI

Application example. Measuring Force Sensors Rigid. Six series Nano, Mini, Gamma, Delta, Theta, Omega. Range of measurement, force ± 36 N..

LCFesR 3.0 precise, wide range measuring unit

17/07/ Pick up Lecture Notes... WEBSITE FOR ASSIGNMENTS AND TOOLBOX DEFINITION DEFINITIONS AND CONCEPTS OF GIS

CRYSTA-APEX C. The modular system for 3D CNC coordinate measurement in the production environment. Quick, versatile and high performing.

Coordinate Measuring Machines Coordinate INDEX Measuring Machines Coordinate Measuring Machines New Products

HiPace 300 with TC 400, DN 100 CF-F

NEC PerforCache. Influence on M-Series Disk Array Behavior and Performance. Version 1.0

OPERATION MANUAL. 3 in 1, IR, Type K/J/R/E/T, Pt 100 ohm THERMOMETER. Model : TM-2000

Solution (a) We can draw Karnaugh maps for NS1, NS0 and OUT:

An NC program is a program that defines the entire sequence of a machining operation to be carried out on a particular CNC machine tool:

Itanium TM Processor Clock Design

Compact Titration Compact Titrator G20. One Click Titration Simple & Dependable

arxiv: v1 [physics.ins-det] 3 Dec 2018 Fast Interaction Trigger for the upgrade of the ALICE experiment at CERN: design and performance

Digital Electronics Part 1: Binary Logic

Lecture 11. Data Standards and Quality & New Developments in GIS

WATER ACTIVITY MEASUREMENT WATER ACTIVITY

QUANTUM MEMORY POWER PDF

Orbit Support Pack for Excel. user manual

CMP 338: Third Class

Organisasi dan Arsitektur Komputer L#1: Fundamental Concepts Amil A. Ilham

Ultrasonic Thickness Gauge TIME2110 (V )

Sun SPOTs: A Great Solution for Small Device Development

Implementing an analog speedometer in STISIM Drive using Parallax BSTAMP microcontroller

Lecture 13: Sequential Circuits, FSM

Digital Techniques. Figure 1: Block diagram of digital computer. Processor or Arithmetic logic unit ALU. Control Unit. Storage or memory unit

Automatic titrators, TitroMatic

Installation Operation Commissioning Maintenance

Lab 4 Motion in One-Dimension Part 2: Position, Velocity and Acceleration Graphically and Statistically (pre-requisite Lab3)

Motors Automation Energy Transmission & Distribution Coatings. Servo Drive SCA06 V1.5X. Addendum to the Programming Manual SCA06 V1.

NEW COMPACT OCEAN BOTTOM CABLED SYSTEM FOR SEISMIC AND TSUNAMI OBSERVATION

Single cam type. Double cam type. Grip force N. Type Model/size Stroke Screw type straight style. Screw type tee style

IDENTIFICATION STS400

Transcription:

FAGOR 8055 CNC Ordering Handbook. Ref. 0801 Fagor Automation, S.Coop. Fagor 8055 CNC - Ordering Handbook - Ref. 0801 pg. 1 / 9

CNC 8055: CONFIGURATIONS Central Unit + (Monitor + Keyboard + Operator Panel) + 10.4" color LCD VGA Black color Central Unit (Monitor + Keyboard + Operator Panel) 83480203 MONITOR-55M-11-LCD For Milling machines & Centers 83480201 MONITOR-55T-11-LCD For Lathes & Turning Centers 83480202 MONITOR-55MC-11-LCD Conversational model for Milling 83480200 MONITOR-55TC-11-LCD Conversational model for Lathes Central Unit + (Monitor) + (Keyboard + Operator Panel) 10.4" color LCD VGA 83480114 NMON-55-11-LCD + Monitor Blue colour Central Unit Blue colour (Keyboard + Operator Panel) 83540043 OP-8040/55 ALFA For Milling machines, Centers, Lathes & Turning Centers 83540041 OP-8040/55 MC Conversational model for Milling 83540042 OP-8040/55 TC Conversational model for Lathes 83540040 OP-8040/55 MCO/TCO Customizable pg. 2 / 9 Fagor 8055 CNC - Ordering Handbook - Ref. 0801

CABLES Monitor cables 2m C.MON.50/55-2M... 03630019 5m C.MON50/55 5M... 03630020 10m C.MON50/55 10M... 03630021 15m C.MON50/55 15M... 03630022 20m C.MON50/55 20M... 03630023 25m C.MON50/55 25M... 03630024 30m CABLE MON.30M... 03630025 35m CABLE MON.35M... 03630026 40m CABLE MON.40M... 03630027 Keyboard & Operator panel cables 2m JOG CABLE-2M... 03630002 5m JOG CABLE-5M... 03630004 10m JOG CABLE-10M... 03630005 15m JOG CABLE-15M... 03630006 20m JOG CABLE-20M... 03630008 25m JOG CABLE-25M... 03630009 30m C.JOG 30M... 03630045 35m C.JOG 35M... 03630046 40m C.JOG 40M... 03630047 45m C.JOG 45M... 03630048 50m C.JOG 50M... 03630049 SERCOS cables Sercos optic fiber 1m SFO-1... 03900001 2m SFO-2... 03900002 3m SFO-3... 03900003 5m SFO-5... 03900005 7m SFO-7... 03900007 10m SFO-10... 03900010 12m SFO-12... 03900012 Flexible Sercos optic fiber 10m SFO-FLEX-10... 03910010 15m SFO-FLEX-15... 03910015 20m SFO-FLEX-20... 03910020 25m SFO-FLEX-25... 03910025 30m SFO-FLEX-30... 03910030 35m SFO-FLEX-35... 03910035 40m SFO-FLEX-40... 03910040 CAN cable for Remote I/O's 5m CAN CABLE 5M... 03780100 10m CAN CABLE 10M... 03780101 15m CAN CABLE 15M... 03780102 20m CAN CABLE 20M... 03780103 25m CAN CABLE 25M... 03780104 30m CAN CABLE 30M... 03780106 35m CAN CABLE 35M... 03780107 40m CAN CABLE 40M... 03780108 45m CAN CABLE 45M... 03780109 50m CAN CABLE 50M... 03780110 75m CAN CABLE 75M... 03780111 100m CAN CABLE 100M... 03780112 150m CAN CABLE 150M... 03780113 Central Unit + (Monitor + Keyboard + Operator Panel) Monitor Cable Keyboard & Operator panel Cable Central Unit + (Monitor) + (Keyboard + Operator Panel) Monitor Cable Keyboard & Operator panel Cable Fagor 8055 CNC - Ordering Handbook - Ref. 0801 pg. 3 / 9

Working with two keyboards Monitor Cable KS 50/55 83900000 The KS 50/55 is an interface module for switching from one keyboard to another. Refrence KS 50/55 includes the 2m cable to connect it to the CNC Keyboard & Operator panel Cable KB-40/55-ALFA 83540035 (Alphanumeric keyboard expansion) Working with two monitors Monitor Cable The DVD 8055 module is an interface for digital video signal duplication DVD AMPLI 8055 83900050 Keyboard & Operator panel Cable pg. 4 / 9 Fagor 8055 CNC - Ordering Handbook - Ref. 0801

MAKING UP THE CENTRAL UNIT Power Supply and Box 83060100 PSB3-8055 For three modules 83060101 PSB6-8055 For six modules CPU module Esential in any System 83090503 CPU-KCF 8055/A-M For Milling machines & Centers 83090502 CPU-KCF 8055/A-T For Lathes & Turning Centers 83090501 CPU-KCF 8055 PLUS-M For Milling machines & Centers 83090500 CPU-KCF 8055 PLUS-T For Lathes & Turning Centers 8055 /A The microprocessor runs at 25 MHz 8055 PLUS The microprocessor runs at 40 MHz 1.- KEYCF Compact Flash memory to store: OEM programs, PLC program, screen customizing programs, tables, parameters, etc The basic KEYCF has 512 Mb Optional 2 GB KEYCF: 83240186 KEY CF 8055/A LARGE 83240180 KEY CF 8055 PLUS LARGE 2.- Digital interface option 83160110 SER-INT-BOARD 83160135 CAN-AXES-BOARD-8055 3.- CAN board for Reomote I/O's (option) 83160120 CAN-INT-BOARD 4.- Ethernet (Require software option) Ethernet conexion. AXES module 83150110 AXES 8055 VPP for analog configurations (non Sercos). Module to process the signals to control the axes, the spindle and the handwheels. 8 analog outputs and 8 feedback inputs. Probe input and 8 analog inputs. 40 PLC opto-coupled digital inputs 24 PLC opto-coupled digital outputs (24 Vdc) 83240203 AXES 8055 VPP SB for Sercos configurations. Module to process the signals to control the axes, the spindle and the handwheels. 4 analog outputs and 4 feedback inputs. Probe input and 8 analog inputs. 40 PLC opto-coupled digital inputs 24 PLC opto-coupled digital outputs (24 Vdc) Fagor 8055 CNC - Ordering Handbook - Ref. 0801 pg. 5 / 9

Additional modules I/O Module 83210100 I/O 8055 Digital I/O expansion module 64 PLC opto-coupled digital inputs 32 PLC opto-coupled digital outputs (24 Vdc) Front Cover 83300100 COVER 8055 Tehe front of the box must be completed with from covers. Sercos Module 83160100 SERCOS 8055 For digital communications between de CNC and the Fagor Digital Drivers Optional cards CPU-Turbo board 80500080 CPU-TURBO-55 An additional 32-bit processor with math coprocessor is used to close the axes position loop, increasing system power by relesing the main processor to deal with background tasks. It can be connected to the Axes an I/O modules. Incompatible with SERCOS-INT-BOARD in CPU module. Use SERCOS 8055 module. Incompatible with CAN-AXES-BOARD-8055. Can not be used with CAN configuration. Remote I/O's Remote module Power Supply & 24I/16O... RIO-PS-24I/16O... 83070015 Remote expansion module 24I/16O... RIO-24I/16O... 83070016 Remote expansion module 48I/32O... RIO-48I/32O... 83070017 Remote module Analog I/O & PT100... RIO-PS-2PT100/4AI/4AO... 83070018 RIO-PS-24I/16O 83070015 RIO-PS-24I/16O 83070015 RIO-24I/16O 83070016 RIO-PS-24I/16O 83070015 RIO-48I/32O 83070017 pg. 6 / 9 Fagor 8055 CNC - Ordering Handbook - Ref. 0801

CNC 8055 /A Software features Code Software features 8055 /A GP M MC MCO T TC TCO Block processing time 9 ms 80501010 Number of axes with standard software ( 4 ) ( 4 ) ( 4 ) ( 4 ) ( 2 ) ( 2 ) ( 2 ) 80501000 Number of axes with optional software ( - ) ( - ) ( - ) ( - ) ( 4 ) ( 4 ) ( 4 ) Save, Edit & Execute programs in KEYCF ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) Electronic threading ( - ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) Tool magazine management ( - ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) Machining canned cycle ( - ) ( 1 ) ( 1 ) ( - ) ( 1 ) ( 1 ) ( - ) Multiple machining canned cycle ( - ) ( 1 ) ( 1 ) ( - ) ( - ) ( - ) ( - ) 83240166 Remote Hard disk ( ) ( ) ( ) ( ) ( ) ( ) ( ) 83240167 Ethernet ( ) ( ) ( ) ( ) ( ) ( ) ( ) 80501004 Rigid tapping ( ) ( ) ( ) ( ) ( ) ( ) ( ) 80501006 Tool life monitoring ( - ) ( ) ( ) ( ) ( ) ( ) ( ) 80501007 Probing canned cycles ( - ) ( ) ( ) ( ) ( ) ( ) ( ) 83240501 Telediagnosis ( ) ( ) ( ) ( ) ( ) ( ) ( ) 83270003 Tool radius compensation ( ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) 83240145 Tangential Control ( ) ( ) ( ) ( ) ( ) ( ) ( ) 83240150 Memory expansion ( ) ( ) ( ) ( ) ( ) ( ) ( ) 83240155 Retracing ( - ) ( ) ( ) ( ) ( ) ( ) ( ) 83240300 Drilling canned cycles on GP ( ) ( - ) ( - ) ( - ) ( - ) ( - ) ( - ) 83240220 GP Basic Software ( 1 ) ( - ) ( - ) ( - ) ( - ) ( - ) ( - ) 83240147 GP 8055/A Software ( ) ( - ) ( - ) ( - ) ( - ) ( - ) ( - ) 83240149 M Basic Software ( - ) ( 1 ) ( 1 ) ( 1 ) ( - ) ( - ) ( - ) 83240141 MC Conversational Software ( - ) ( - ) ( 1 ) ( - ) ( - ) ( - ) ( - ) 83240143 MCO Conversational Software ( - ) ( - ) ( - ) ( 1 ) ( - ) ( - ) ( - ) 83240148 T Basic Software ( - ) ( - ) ( - ) ( - ) ( 1 ) ( 1 ) ( 1 ) 83240142 TC Conversational Software ( - ) ( - ) ( - ) ( - ) ( - ) ( 1 ) ( - ) 83240144 TCO Conversational Software ( - ) ( - ) ( - ) ( - ) ( - ) ( - ) ( 1 ) 80501002 Solid graphics ( - ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) 80501003 Pockets with islands ( - ) ( 1 ) ( 1 ) ( 1 ) ( - ) ( - ) ( - ) 80501008 DNC Communications ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) 83270002 Profile editor ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) 83240156 Setup assistance ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( - ) Not available ( 1 ) Standard feature ( ) Optional feature Fagor 8055 CNC - Ordering Handbook - Ref. 0801 pg. 7 / 9

CNC 8055 PLUS Software features Code Software features 8055 PLUS GP M MC MCO T TC TCO Block processing time 3 ms (1,5 CPU turbo) 80501010 Number of axes with standard software ( 4 ) ( 4 ) ( 4 ) ( 4 ) ( 2 ) ( 2 ) ( 2 ) 80501000 Number of axes with optional software ( 7 ) ( 7 ) ( 7 ) ( 7 ) ( 4 ) ( 4 ) ( 4 ) 80501001 Number of axes with optional software ( - ) ( - ) ( - ) ( - ) ( 7 ) ( 7 ) ( 7 ) Save, Edit & Execute programs in KEYCF ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) Electronic threading ( - ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) Tool magazine management ( - ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) Machining canned cycle ( - ) ( 1 ) ( 1 ) ( - ) ( 1 ) ( 1 ) ( - ) Multiple machining canned cycle ( - ) ( 1 ) ( 1 ) ( - ) ( - ) ( - ) ( - ) 83240166 Remote Hard disk ( ) ( ) ( ) ( ) ( ) ( ) ( ) 83240167 Ethernet ( ) ( ) ( ) ( ) ( ) ( ) ( ) 80501004 Rigid tapping ( ) ( ) ( ) ( ) ( ) ( ) ( ) 80501005 Digitizing ( - ) ( ) ( ) ( ) ( - ) ( - ) ( - ) 80501006 Tool life monitoring ( - ) ( ) ( ) ( ) ( ) ( ) ( ) 80501007 Probing canned cycles ( - ) ( ) ( ) ( ) ( ) ( ) ( ) 80501009 COCOM version ( ) ( ) ( ) ( ) ( ) ( ) ( ) 83240501 Telediagnosis ( ) ( ) ( ) ( ) ( ) ( ) ( ) 83270001 C Axis for Lathe ( - ) ( - ) ( - ) ( - ) ( ) ( ) ( ) 83270003 Tool radius compensation ( ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) 83270009 Y Axis for Lathe ( - ) ( - ) ( - ) ( - ) ( ) ( ) ( ) 83240500 Opción TCP // TCP Option ( - ) ( ) ( ) ( ) ( - ) ( - ) ( - ) 83240145 Tangential Control ( ) ( ) ( ) ( ) ( ) ( ) ( ) 83240155 Retracing ( - ) ( ) ( ) ( ) ( ) ( ) ( ) 83240300 Drilling canned cycles on GP ( ) ( - ) ( - ) ( - ) ( - ) ( - ) ( - ) 83240220 GP Basic Software ( 1 ) ( - ) ( - ) ( - ) ( - ) ( - ) ( - ) 83240200 GP 8055 PLUS Software ( ) ( - ) ( - ) ( - ) ( - ) ( - ) ( - ) 83240149 M Basic Software ( - ) ( 1 ) ( 1 ) ( 1 ) ( - ) ( - ) ( - ) 83240141 MC Conversational Software ( - ) ( - ) ( 1 ) ( - ) ( - ) ( - ) ( - ) 83240143 MCO Conversational Software ( - ) ( - ) ( - ) ( 1 ) ( - ) ( - ) ( - ) 83240148 T Basic Software ( - ) ( - ) ( - ) ( - ) ( 1 ) ( 1 ) ( 1 ) 83240142 TC Conversational Software ( - ) ( - ) ( - ) ( - ) ( - ) ( 1 ) ( - ) 83240144 TCO Conversational Software ( - ) ( - ) ( - ) ( - ) ( - ) ( - ) ( 1 ) 80501002 Solid graphics ( - ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) 80501003 Pockets with islands ( - ) ( 1 ) ( 1 ) ( 1 ) ( - ) ( - ) ( - ) 80501008 DNC Communications ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) 83270002 Profile editor ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) 83240156 Setup assistance ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( 1 ) ( - ) Not available ( 1 ) Standard feature ( ) Optional feature pg. 8 / 9 Fagor 8055 CNC - Ordering Handbook - Ref. 0801

2024 © sciencedocbox.com Privacy Policy | Terms of Service | Feedback