1-of-8 Decoder/Demultiplexer General Description The AC/ACT138 is a high-speed 1-of-8 decoder/demultiplexer. This device is ideally suited for high-speed bipolar memory chip select address decoding. The multiple input enables allow parallel expaion to a 1-of-24 decoder using just three AC/ACT138 devices or a 1-of-32 decoder using four AC/ACT138 devices and one inverter. Ordering Code: Features Device also available in Tape and Reel. Specify by appending suffix letter X to the ordering code. November 1988 Revised August 2000 I CC reduced by 50% Demultiplexing capability Multiple input enable for easy expaion Active LOW mutually exclusive outputs Outputs source/sink 24 ma ACT138 has TTL-compatible inputs Order Number Package Number Package Description 74AC138SC M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow 74AC138SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74AC138MTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74AC138PC N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide 74ACT138SC M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow 74ACT138SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74ACT138PC N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide 74AC138 74ACT138 1-of-8 Decoder/Demultiplexer Connection Diagram Logic Symbols Pin Descriptio IEEE/IEC Pin Names A 0 A 2 E 1 E 2 E 3 O 0 O 7 Description Address Inputs Enable Inputs Enable Input Outputs FACT is a trademark of Fairchild Semiconductor Corporation. 2000 Fairchild Semiconductor Corporation DS009925 www.fairchildsemi.com
Truth Table Inputs Outputs E 1 E 2 E 3 A 0 A 1 A 2 O 0 O 1 O 2 O 3 O 4 O 5 O 6 O 7 H X X X X X H H H H H H H H X H X X X X H H H H H H H H X X L X X X H H H H H H H H L L H L L L L H H H H H H H L L H H L L H L H H H H H H L L H L H L H H L H H H H H L L H H H L H H H L H H H H L L H L L H H H H H L H H H L L H H L H H H H H H L H H L L H L H H H H H H H H L H L L H H H H H H H H H H H L H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Functional Description The AC/ACT138 high-speed 1-of-8 decoder/demultiplexer accepts three binary weighted inputs (A 0, A 1, A 2 ) and, when enabled, provides eight mutually exclusive active- LOW outputs (O 0 O 7 ). The AC/ACT138 features three Enable inputs, two active-low (E 1, E 2 ) and one active- HIGH (E 3 ). All outputs will be HIGH unless E 1 and E 2 are LOW and E 3 is HIGH. This multiple enable function allows easy parallel expaion of the device to a 1-of-32 (5 lines to 32 lines) decoder with just four AC/ACT138 devices and one inverter (see Figure 1). The AC/ACT138 can be used as an 8-output demultiplexer by using one of the active LOW Enable inputs as the data input and the other Enable inputs as strobes. The Enable inputs which are not used must be permanently tied to their appropriate active-high or active-low state. Logic Diagram Please note that this diagram is provided only for the understanding of logic operatio and should not be used to estimate propagation delays. FIGURE 1. Expaion to 1-of-32 Decoding www.fairchildsemi.com 2
Absolute Maximum Ratings(Note 1) Supply Voltage (V CC ) 0.5V to +7.0V DC Input Diode Current (I IK ) V I = 0.5V 20 ma V I = V CC + 0.5V +20 ma DC Input Voltage (V I ) 0.5V to V CC + 0.5V DC Output Diode Current (I OK ) V O = 0.5V 20 ma V O = V CC + 0.5V +20 ma DC Output Voltage (V O ) 0.5V to V CC + 0.5V DC Output Source or Sink Current (I O ) ±50 ma DC V CC or Ground Current per Output Pin (I CC or I GND ) ±50 ma Storage Temperature (T STG ) 65 C to +150 C Junction Temperature (T J ) PDIP 140 C DC Electrical Characteristics for AC Recommended Operating Conditio Supply Voltage (V CC ) AC 2.0V to 6.0V ACT 4.5V to 5.5V Input Voltage (V I ) 0V to V CC Output Voltage (V O ) 0V to V CC Operating Temperature (T A ) 40 C to +85 C Minimum Input Edge Rate ( V/ t) AC Devices V IN from 30% to 70% of V CC V CC @ 3.3V, 4.5V, 5.5V 125 mv/ Minimum Input Edge Rate ( V/ t) ACT Devices V IN from 0.8V to 2.0V V CC @ 4.5V, 5.5V 125 mv/ Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specificatio should be met, without exception, to eure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of FACT circuits outside databook specificatio. 74AC138 74ACT138 V CC T A = +25 C T A = 40 C to +85 C Symbol Parameter Units Conditio (V) Typ Guaranteed Limits V IH Minimum HIGH Level 3.0 1.5 2.1 2.1 V OUT = 0.1V Input Voltage 4.5 2.25 3.15 3.15 V or V CC 0.1V 5.5 2.75 3.85 3.85 V IL Maximum LOW Level 3.0 1.5 0.9 0.9 V OUT = 0.1V Input Voltage 4.5 2.25 1.35 1.35 V or V CC 0.1V 5.5 2.75 1.65 1.65 V OH Minimum HIGH Level 3.0 2.99 2.9 2.9 Output Voltage 4.5 4.49 4.4 4.4 V I OUT = 50 µa 5.5 5.49 5.4 5.4 V IN = V IL or V IH 3.0 2.56 2.46 I OH = 12 ma 4.5 3.86 3.76 V I OH = 24 ma 5.5 4.86 4.76 I OH = 24 ma (Note 2) V OL Maximum LOW Level 3.0 0.002 0.1 0.1 Output Voltage 4.5 0.001 0.1 0.1 V I OUT = 50 µa 5.5 0.001 0.1 0.1 V IN = V IL or V IH 3.0 0.36 0.44 I OL = 24 ma 4.5 0.36 0.44 V I OL = 24 ma 0 5.5 0.36 0.44 I OL = 24 ma (Note 2) I IN Maximum Input (Note 4) Leakage Current 5.5 ±0.1 ±1.0 µa V I = V CC, GND I OLD Minimum Dynamic 5.5 75 ma V OLD = 1.65V Max I OHD Output Current (Note 3) 5.5 75 ma V OHD = 3.85V Min I CC (Note 4) Maximum Quiescent Supply Current 5.5 4.0 40.0 µa V IN = V CC or GND Note 2: All outputs loaded; thresholds on input associated with output under test. Note 3: Maximum test duration 2.0 ms, one output loaded at a time. Note 4: I IN and I CC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V V CC. 3 www.fairchildsemi.com
DC Electrical Characteristics for ACT V CC T A = +25 C T A = 40 C to +85 C Symbol Parameter Units Conditio (V) Typ Guaranteed Limits V IH Minimum HIGH Level 4.5 1.5 2.0 2.0 V OUT = 0.1V V Input Voltage 5.5 1.5 2.0 2.0 or V CC 0.1V V IL Maximum LOW Level 4.5 1.5 0.8 0.8 V OUT = 0.1V V Input Voltage 5.5 1.5 0.8 0.8 or V CC 0.1V V OH Minimum HIGH Level 4.5 4.49 4.4 4.4 Output Voltage 5.5 5.49 5.4 5.4 V I OUT = 50 µa V IN = V IL or V IH 4.5 3.86 3.76 V I OH = 24 ma 5.5 4.86 4.76 I OH = 24 ma (Note 5) V OL Maximum LOW Level 4.5 0.001 0.1 0.1 Output Voltage 5.5 0.001 0.1 0.1 V I OUT = 50 µa V IN = V IL or V IH 4.5 0.36 0.44 V I OL 24 ma 5.5 0.36 0.44 I OL.= 24 ma (Note 5) I IN Maximum Input Leakage Current 5.5 ±0.1 ±1.0 µa V I = V CC, GND I CCT Maximum I CC /Input 5.5 0.6 1.5 ma V I = V CC 2.1V I OLD Minimum Dynamic 5.5 75 ma V OLD = 1.65V Max I OHD Output Current (Note 6) 5.5 75 ma V OHD = 3.85V Min I CC Maximum Quiescent Supply Current 5.5 4.0 40.0 µa V IN = V CC or GND Note 5: All outputs loaded; thresholds on input associated with output under test. Note 6: Maximum test duration 2.0 ms, one output loaded at a time. AC Electrical Characteristics for AC V CC T A = +25 C T A = 40 C to +85 C Symbol Parameter (V) C L = 50 pf C L = 50 pf Units (Note 7) Min Typ Max Min Max t PLH Propagation Delay 3.3 1.5 8.5 13.0 1.5 15.0 A n to O n 5.0 1.5 6.5 9.5 1.5 10.5 t PHL Propagation Delay 3.3 1.5 8.0 12.5 1.5 14.0 A n to O n 5.0 1.5 6.0 9.0 1.5 10.5 t PLH Propagation Delay 3.3 1.5 11.0 15.0 1.5 16.0 E 1 or E 2 to O n 5.0 1.5 8.0 11.0 1.5 12.0 t PHL Propagation Delay 3.3 1.5 9.5 13.5 1.5 15.0 E 1 or E 2 to O n 5.0 1.5 7.0 9.5 1.5 10.5 t PLH Propagation Delay 3.3 1.5 11.0 15.5 1.5 16.5 E 3 to O n 5.0 1.5 8.0 11.0 1.5 12.5 t PHL Propagation Delay 3.3 1.5 8.5 13.0 1.5 14.0 E 3 to O n 5.0 1.5 6.0 8.0 1.0 9.5 Note 7: Voltage Range 3.3 is 3.3V ± 0.3V Voltage Range 5.0 is 5.0V ± 0.5V www.fairchildsemi.com 4
AC Electrical Characteristics for ACT V CC T A = +25 C T A = 40 C to +85 C Symbol Parameter (V) C L = 50 pf C L = 50 pf Units (Note 8) Min Typ Max Min Max t PLH Propagation Delay A n to O n 5.0 1.5 7.0 10.5 1.5 11.5 t PHL Propagation Delay 10.5 5.0 1.5 6.5 A n to O n 1.5 11.5 t PLH Propagation Delay E 1 or E 2 to O n 5.0 2.5 8.0 11.5 2.0 12.5 t PHL Propagation Delay E 1 or E 2 to O n 5.0 2.0 7.5 11.5 2.0 12.5 t PLH Propagation Delay E 3 to On 5.0 2.5 8.0 12.0 2.0 13.0 t PHL Propagation Delay E 3 to On 5.0 2.0 6.5 10.5 1.5 11.5 Note 8: Voltage Range 5.0 is 5.0V ± 0.5V 74AC138 74ACT138 Capacitance Symbol Parameter Typ Units Conditio C IN Input Capacitance 4.5 pf V CC = OPEN C PD Power Dissipation Capacitance 60.0 pf V CC = 5.0V 5 www.fairchildsemi.com
Physical Dimeio inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M16A www.fairchildsemi.com 6
Physical Dimeio inches (millimeters) unless otherwise noted (Continued) 74AC138 74ACT138 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M16D 7 www.fairchildsemi.com
Physical Dimeio inches (millimeters) unless otherwise noted (Continued) 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC16 www.fairchildsemi.com 8
Physical Dimeio inches (millimeters) unless otherwise noted (Continued) 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N16E 74AC138 74ACT138 1-of-8 Decoder/Demultiplexer Fairchild does not assume any respoibility for use of any circuitry described, no circuit patent licees are implied and Fairchild reserves the right at any time without notice to change said circuitry and specificatio. LIFE SUPPORT POLICY FAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with itructio for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 9 www.fairchildsemi.com